Brother HL-L8260CDW Laser Printer Fuser Roller Replacement

In this video, I go through the entire process step by step to replace fuser and fuser pressure rollers on Brother HL-L8260CDW printer. The first symptom of a bad or damaged fuser roller is wrinkled paper when it comes out of the printer. Paper wrinkling is an indication of the media (paper) overheating during toner fusing process. Fuser roller is also visible in the back of the printer after opening a rear panel and can be inspected for damage without removing a single screw.
Replacing a fuser roller is not too difficult if you follow my video but does require a certain skill level. Sometimes projects like this should be left to the certified repair professionals. If you feel up for the challenge, just follow along.
Disclaimer: I am not a trained printer repair professional and do not guarantee the accuracy of my instructions. I am not responsible for any damages or voided warranty you may incur while performing this repair.
The parts you will need: amzn.to/3FFuilI
But if you are looking to buy this printer new: amzn.to/3WpBCZ5
Note: buying from the links in this description will help support this channel. I plan on adding lots of more videos with time.

[@DanceSupplies]

Fantastic video and HUGE help to us. I just replaced the rollers following your video step by step and it worked like a charm. Great job and thank you!!!

[@tsmelker999]

Almost had a fire with my Brother MFC-L8900CDW. Followed your procedure, everything works great!! Thank you for the wonderful walk through the process. TIP: Using 24lb paper now... no jams, no issues..

[@MrChamboman]

Thanks, it worked on my Brother MFC L8900. Replaced both rollers. It was a painful at times, but your instructions were very helpful.

[@DIY-Hank]

Glad it was helpful, thank you for leaving a comment.

[@familieseeger2660]

Sehr gutes Video! Ich konnte so unseren HL-L8250CDN retten, der bei der Fixiereinheit baugleich ist. Die Ersatzteile waren für gerade einmal 30 € zu haben. Vielen Dank Hank!!! english: Very good video! I was able to save our HL-L8250CDN, which has the same fuser unit. The spare parts were available for just €30. Thank you Hank!!! 👏👏👏

[@DIY-Hank]

Thank you very much for your comment. Glad it was helpful.

[@Joesoap1]

This is timely, my roller assembly just completely jammed with paper and almost set it on fire! Exact same model, about 2.5 years old

[@hannalyons4376]

This is incredibly helpful! thank you!

[@user-nj6dy5gt2m]

Thank you for this tutorial!!! I have this exact problem and waiting for replacement rollers and pressure rollers - my unit melted toner on itself

[@respen43]

Awesome, thanks. Had this exact problem and your video helped diagnose and fix the issue. Keep up the good work.

[@henryguns3774]

Great but for releasing spring safely, there are special tools such as bernstein ones (ref 2-130 for a complete set)

[@zealotmorgan]

Great video and very helpful, unfortunately now have Error 05 and can't get rid of it - fuser problem ? When I had the maxhine apart I found one of the plastic paper guides near fuser had broken too ! Not such a great machine after all.

[@jpgl6045]

I did it. Thank you.

[@microsoftsarker]

the good work

[@HardBasterd]

Hey. Thanks for the Video. Is there any difference between the fuser rolls, or can i install every fuser roll that's made for brother Laser printers?

[@DIY-Hank]

Unfortunately, I don't know the answer to this. I suspect that there is a difference. The rollers should list which models they are compatible with.

[@HardBasterd]

@@DIY-Hank Thanks. (:

[@user-zj4rz1nd9l]

Quick question... The bottom right hand panel's small tab (V shaped) has broken off. Does the entire right hand panel need to be replaced or will it still work without the small V shaped tab? Regardless of what I do I continue to receive "print unable 05 code."

[@DIY-Hank]

I am not an expert on Brother printers. I am assuming you already checked out their support page: help.brother-usa.com/app/answers/detail/a_id/150741/~/print-unable-05 I don't understand what small tab you are referring to.

[@zealotmorgan]

Did you manage to fix the 05 error ? I have same promblem

[@BAS-nl2gg]

i got a paper jam error after doing this. any suggestions?

[@DIY-Hank]

My only guess is that a screw or some bracket was replaced incorrectly or some wire is blocking some sensors. Unfortunately I am not an expert repair technician, that's why it's DIY. I recommend taking it apart and reassembling again.

[@DIY-Hank]

Or could be a defective roller?

[@victorhugodiel9727]

How to reset parts to HL-8360 kzbin.info/www/bejne/d2LRhpVse7OhZqs&ab_channel=VictorHugoDiel

[@s7arkill3r]

Always have the brazilian guy when scrolling through the comments. Obrigado meu bruxo!