This is a video demonstration how to repair and stop light rust on your firearm.
Пікірлер: 212
@Felenari5 жыл бұрын
No mistakes, just happy little rust clouds.
@ryand25293 жыл бұрын
Happy, happy rust clouds!!!
@joshua-the-seer84943 жыл бұрын
The Bob Ross of Guns
@virginiascurti50362 жыл бұрын
His patter does remind you of Bob Ross.
@dd-nv6sw5 жыл бұрын
Lots of negative comments. I clicked on the video for information, not entertainment. Got the info I was looking for.
@nbt36634 жыл бұрын
Exactly. The children want him to fix their problem for them and are mad that by the end of the video their gun isnt cleaned.
@EricCindyKaneshiro Жыл бұрын
My wife took our Mossberg 500 18" barrel to Alaska loaded with slugs this past September for bear protection while I was hunting moose. It rained on us for days and I treated our firearms with Renaissance wax but in the end there was dark orange rust I was unable to remove with an oiled patch. A patch with Hoppes solvent and 0000 steel wool with Hoppes has the shotgun looking like new. Thank you so much for this video!
@NINJADMS6 жыл бұрын
This guy is like the Mr Rogers of firearms!
@henryjon45able5 жыл бұрын
I was thinking bob ross,
@David-fv7zg4 жыл бұрын
Bob Ross gets my vote, oil that happy little gun.
@JustinGray704 жыл бұрын
You need to watch Midway USA's Larry Potterfield.
@JoryRFerrell4 жыл бұрын
Exactly! "There are no negligent discharges. Only happy little accidents." :D
@leebaker25883 жыл бұрын
@@JustinGray70 cause' that's the way it is . . .
@basshuntet6074 жыл бұрын
The folks at Brownells have ALWAYS treated me right.
@geico19752 жыл бұрын
Glad I came across this, I noticed surface rust on my guns and shotgun shells on the brass today. The only thing I can contribute it to, is humidity. I keep it in my gun safe, but not a very good gun safe, more like a glorified taller metal filing cabinet:) All I could afford a while back:) Anyway, I do keep Silica Gel Packets Desiccant Dehumidifiers packs scattered around inside the gun safe. I used 0000 fine steel wool, then wiped everything down with some Remington gun oil. Guess there's no stopping it.
@geico19752 жыл бұрын
I've also been looking at the Hornady 95900 Rechargeable Gun Safe Dehumidifier. Might be a solution for as small as my "safe" is:)
@dallas53745 жыл бұрын
This dude has a cool voice.
@nanroses21375 жыл бұрын
Thanks your video, it was very helpful in taking light rust that just as described did not disappear with an oil rubbing. I live in South Florida and sweat profusely. Knowing this I will wipe my EDC regularly, but sometimes you... well you know. I used the Flitz product I already had but only used on bare stainless steel. Light, gentle rubbing achieved great results. I wish I had taken pictures. Again, thank you.
@AwesomeMegaBalls9 жыл бұрын
Thank you so much! This saved me time and money!
@ChristiRich6 жыл бұрын
Whoa! The Flitz really works well. Thanks.
@ryand25293 жыл бұрын
Thank you for demonstrating that.
@browjonb9 жыл бұрын
I just bought a police trade in M&P 40 that has some minor corrosion on the slide and all three mags. Used Hoppes solvent and oil with 0000 steel wool and gun now looks good as new. Thanks Brownells!
@brownells9 жыл бұрын
Heck yeah! Glad to hear it!
@RosinSmoker2096 жыл бұрын
I had some light rust on the imprint of my firearm where the manufacture stamps their name. I had to use the 0000 steel wool cloth and hoppe's gun cleaner to remove it. Shout out to the man in this video for the assistance.
@VagoniusThicket4 жыл бұрын
Dab&Cannabis Copper wool is also available and is much softer .
@bkdesignr9 жыл бұрын
great information. i'm going to try this on the rear of the slide on my ruger p95. thank you!
@Junior-fd8ux3 жыл бұрын
If you have bad rust and want to give it a shot use a real copper penny and gun oil. Lightly swipe the face of the penny back an forth with the grain of the metal an watch it come off. Go easy and slow and you will should like your results. Iv done this on a few like this and one old PPK was rusted so bad the action was locked up. The blueing on that 1929 PPK was amazing, it held up under the rust only loosing its sheen towards the tip of the slide. Its pretty amazing
@bensmithwick43438 жыл бұрын
Thank you for your information it helped out a lot.
@mikejames99313 жыл бұрын
Great Information and I forgot about using Flitz.Had my Stainless Ruger in a Uncle Mikes gun holster and had not taken it out for a while.When I removed it from the Holster light Rust only on the Barrel where the Holster contacted it.I believe the Holster absorbed all the Oil from the porosity of the Stainless barrel where it made contact.The rest of the gun looks brand new.Got a lot off just with Oil on a Paper Towel.So I will use the Flitz first and if not will use the Steel Wool with Oil on it.After its off will apply Corrosion X Gun Oil and let it stay on it for a week before wiping it off.Had been using Breakfree CRP but I think Corrosion X is a better Oil now after watching a lot of Videos comparing the Top Oils and Corrosion X always did awesome on stopping Rust.Wont be putting my Ruger back in the Holster unless I carry it in the Woods Hunting.Thanks a Lot really good Video!!
@bokusworld97802 жыл бұрын
Will it remove light rust from inside the barrel?
@T.Show279 ай бұрын
Holy hell i didnt know brownells had a youtube presence this far back
@DavidLowry19 жыл бұрын
Thanks much for this video. Very helpful.
@66ft2 жыл бұрын
I have a benneli supernova tactical barrel that insists on flash rusting. I found the wife's old school yellow and green sponge she keeps under the sink has a very light steel wool side that removes the rust quickly and easily with some no.9 oil without scratching the barrel at all. (Use a new sponge obviously.)
@ezequielvaldivia64037 жыл бұрын
Thanks a lot I stored my mossberg for acouple months in a plastic gun case took it out and saw that light rust I saw in this video I will try to remove it on my day off :)
@panders553 жыл бұрын
buy you some Allen gun socks, these will help you.
@kevinhood97814 ай бұрын
Thank you, im new to guns and bought an expensive one online. It has small surface rust on the handle of the bolt. Will try this thanks
@1911fortyfiv54 жыл бұрын
That Remington 1100, what a beauty
@urygen3 жыл бұрын
They’re great guns. I have one in 16Ga that’s been shot to hell and still works like new. Can count the jams on my hand
@Billman667 жыл бұрын
I have used Flitz and can attest to it's ability to remove rust. It also will shine up a blued surface beautifully. Do not, however, use it on any anodized surface.
@robertfandel94425 жыл бұрын
Flitz and a pen eraser
@dandamanfishing41797 жыл бұрын
Thanks a lot saved my guns and I a lot of trouble.
@brownells7 жыл бұрын
Yessss! Thanks for watching!
@blackemmons6 жыл бұрын
Interesting. Thanks. I will be trying these methods. JimE
@KendrickLacannabis9 жыл бұрын
That 11-87 is gorgeous.
@1LRLRGАй бұрын
I have finally been able to get my first .22 back from my brother and it has got some fairly serious pits on the surface of the barrel, not enough to compromise it but such that it would be visible if blued and it is not really worth having it professionally done just sentimental. Can you take something like JB weld metal compound and use this to fill the small pit so when I paint it or finish it it will look somewhat smooth? Thanks
@nelsonwalker71056 ай бұрын
thank you i learned from this video
@panders553 жыл бұрын
Thank you for the info,
@dirtywhiteboy49638 жыл бұрын
thanks for your help!
@brownells8 жыл бұрын
Our pleasure John!
@michaelpage41994 жыл бұрын
Great advice. Going to try this on some small brown surface spots on my barrel. Thanks
@i.b.deplorable2 жыл бұрын
What grease or oil is best for protecting the bore of a rifle or shotgun for long term storage? Cosmoline, perhaps? And how to apply it uniformly and thick enough? (I will clean it out before firing again.)
@Twitter_sucksАй бұрын
I like how you're using the exact shotgun I'm having problems with 😂
@robertbrandywine7 жыл бұрын
If you have very light pitting, will keeping the area oiled all the time prevent further rusting?
@heckpeanuts2 жыл бұрын
Left my Draco in my truck for a week. Never knew humidity could be that big of a issue.
@Stutts18955 жыл бұрын
U just saved my ar's forward assist and safety
@bigbeaver2 жыл бұрын
Brownells 1939-2024 RIP...We will miss you !!! Corn by one's onw bushel.
@hansgrueber81693 жыл бұрын
I've heard men from Long Island who have vowels that end their last names swear up and down that olive oil is all you need for firearm lubrication and cleaning.
@lincolnk.19642 жыл бұрын
Kerny boys used to keep all thier guns hidden in drums of olive oil. The color hid them when smuggling them.
@BigHammerz7 ай бұрын
Vanilla pudding works as well
@richardrogers82543 ай бұрын
Heard old timer say 0000 steel wool and motor oil like fie car. Have to keep the steel wool oiled really good, using light strokes and it won't damage the finish. Wipe dry, reblue if need.
@robertbrandywine7 жыл бұрын
Will applying a mild acid like vinegar get down to the bottom of pitted rust and remove it?
@Farmer-bh3cg3 жыл бұрын
I realize this is years later but, if you don't mind, a question. Would 4/0 bronze wool work? Reason. Steel wool fragments caught in the metal pores and tiny machinings will rust again. Bronze wool won't rust or corrode readily. Thanks for your help!
@122Music13 жыл бұрын
Will Vinegar aid in minimizing oxidation for Guns? I use it on rusted Amplifier chasis that oxidized. Works great 4-000 steel wool with Vinegar. Buff, dry and lightly oil. Thoughts? Maybe a light polishing cloth and vinegar on the gun? Dry & Oil ?
@johnboy74172 жыл бұрын
Don’t use vinegar, it’s acidity will mess will mess with the bluing on firearms since it’s a form of rust
@CA.0verview7 ай бұрын
Will solvent remove the bluing from the receiver or on the frame revolver?
@MrZacfisher10 жыл бұрын
so dont worry about rust quite so much, do you best to keep it at bay but its going to happen pretty much? and keep it well oiled? ive been oiling mine like crazy, i live in louisiana and worry about the humidity
@JokahFACE8 жыл бұрын
+MrZacfisher I hate how finicky steel is. Its seems like a lot of people go nuts cleaning their guns.
@onetalentedman28228 жыл бұрын
Nothing beats the shiny side of baking foil ( the thin type used to wrap a Turkey ). Cut a small piece fold it & rub the rust gently with a top brand drop of coke, then rub with a soft cloth & a little gun oil for protection . I've used it on my guns for over 40 years & there still mint condition. May seem crazy but it works & sure beets using the finest wire wool to rid rust.
@onenikkione3 жыл бұрын
Coke, the powered kind or liquid type?
@Rick-tb4so3 жыл бұрын
What would you use to remove light rust and bluing ??
@cplinstructor2 жыл бұрын
I just use 0000 steel wool dry, it works fine, doesn’t mess with the finish that I can see, just be gentle, eats rust. Not for pitting, but everything else is fine. Even pitting cleans up, but obviously it is still pitted.
@alphonsegonzalez70813 жыл бұрын
During the off season I keep my guns in rust proof treated bags. The company I use is Zerust. This technology is used in the machine tool trade to keep machine tools like milling machine heads from rusting when sitting on the shelf. Does anyone else use this method?
@jp14196 жыл бұрын
Can you use ballistol for this?
@Kami3Kaze3 жыл бұрын
i've been having some green stuff start to show up on my guns surface it cleans off quick but keeps coming back
@danwesson19342 жыл бұрын
I have light rust on older colt python, would 0000 steel wool and oil work ?
@TCUsouthpaw8 жыл бұрын
Had my maxus in my truck for a month and forgot to take it out. Have a little bit of rust all the way on the top of my rib. I hate it..
@dukehoffman1243 жыл бұрын
They do make a bronze wool too .
@antoinem.23253 жыл бұрын
Will solvant damage the bluing?
@haroldcalahan21518 жыл бұрын
always check on your guns frequently - and oil them - I went awhile without checking them in the safe and several developed some pitting including my first deer rifle I had for years. I was heartbroken. I cleaned the guns up with hopes 9 but the pit marks remain.
@richardcarden41615 жыл бұрын
Try Clenzoil I have found it breaks down light rust.And for christ sake keep it oiled up with something better than Remoil!A gun sock is a good protector as well as a dissacant pack (Preferably a large one) in your gun safe is a good idea.
@kyleritchie47514 жыл бұрын
I just bought a brand new Remington wingmaster and I was taking it apart to do an initial cleaning and oiling and I noticed there is light rust where the magazine tube connects into the receiver. After researching I hear this is an ongoing problem with Remington as their quality is declining, does anybody know if I can take the magazine tube out of the receiver to clean the rust off? If not how do I fix this? Any ideas would be great, thanks
@lenkimmar3 жыл бұрын
I believe you are looking at the solder used to fasten the tube to the receiver.
@mahrifle110 жыл бұрын
Great video!! can light rust really damage a gun? or you just clean it and make sure it does not happend again.
@dirtywhiteboy49638 жыл бұрын
I'll try and get back in the new year and tell you how the cleaning went
@brownells8 жыл бұрын
Perfect!
@whitestar87178 жыл бұрын
+Brownells, Inc. I just took my old rifle out of storage and i guess it had light orange rust on the outer barrel and some parts of the upper. Thanks for the information. 80% of it seems to have come off with just rubbing it off, but some of it still remains on the barrel. hopefully i can restore it to how it was when i stored it. This time i will buy proper storage container etc.
@donniejep57452 жыл бұрын
I really like how the first thing he lists that can cause rust, is blood.
@tylerterrible1006 жыл бұрын
I’m getting rust in my magwell Of my 1911 that I carry how should I go about that cause it’s in a tough spot to get to
@Not_Sure_816 жыл бұрын
Tyler Rager just a thought here...but maybe take a toothbrush and wrap the 0000 steel wool around it and secure it with a rubber band? Thats what came to mind
@alecmcmillan60003 жыл бұрын
Sand blasting into the magwell might be the only option I could think of. How did you fix it?
@JohnnyRebKy11 ай бұрын
FLITZ is great stuff!
@bokusworld97802 жыл бұрын
How can you get light rust out of the inside of a bore though?
@ohboy25922 жыл бұрын
A bore brush and cleaner
@Chinyai5 жыл бұрын
Thanks so much, could you provide any links for purchases these products?
@nosehead59215 жыл бұрын
hoppes no 9. its not too expensive and works pretty good. good luck.
@RebelRob346 жыл бұрын
"4 ought" steel wool? I can't quite make out the type of steel wool I need to buy for this. Thanks.
@radishfox3086 жыл бұрын
RebelRob34 It will say 0000 steel wool. Like 30-06, we say "thirty ought six" not "thirty oh six" or "thirty zero six"
@colewarren95126 жыл бұрын
RebelRob34 0000 steel wool
@VagoniusThicket4 жыл бұрын
Try copper wool , it is softer .
@DanielADickey3 жыл бұрын
0000
@chrischiampo76475 жыл бұрын
I Use a Copper Penny and Used Motor Oil Works Amazingly Well No Finish Issues At All 😀😊
@ellissmithjr65995 жыл бұрын
On all my guns including hand guns I use... To clean...Mobil 1 ATF To lube...Mobil 1 OIL
@chocolatemilk20763 жыл бұрын
An old guy used detergent free oil
@redtobertshateshandles9 ай бұрын
@@chocolatemilk2076yep. Motor oil will cause dermatitis. I'm a qualified mechanic. I know.
@user-hj2vy4sk8j4 жыл бұрын
Fell asleep and woke up here lol
@Letsallparty22 жыл бұрын
Post link to products please
@aarongray5037 жыл бұрын
I have found some rust in the bore of my M1. Baby came and priorities changed. How should I take care of this? Its a orange color.
@JohnDoe-yn9pu7 жыл бұрын
Aaron Gray use aome gun oil and soak the rust and then clean the gun like normal
@mobstamaniac7 жыл бұрын
One would've though to use gun cleaning solvent?
@JohnDoe-yn9pu7 жыл бұрын
mobstamaniac if you let some gun cleaning solvents sif foo long theyll damage the metal
@mobstamaniac7 жыл бұрын
John Doe Yeah I don't let it sit too long, just a short little while in the barrel then get them patches pulled though. Being a solvent, as you say it will damage the metal, gotta be careful.
@JohnDoe-yn9pu7 жыл бұрын
mobstamaniac if you use a good clp it can sit as long as you want
@joshualewis53010 жыл бұрын
Can a penny be used? Or any copper for that matter.
@ricksenra12029 жыл бұрын
Copper wool is preferred by many. They say the wool can leave fiber behind, steel will rust, copper will not. Also, todays pennies are barely copper.
@bombhills935 жыл бұрын
Sorry but steel wool will get the rust off only to have it some back worse a couple months later. The steel gets into micro pores and fists quicker then gun steel. Been there, done that. Solution: artificial steel wool scotch bright pads from hardware store
@BibleGuyProductions Жыл бұрын
I have a kimber campguard in 10mm and when I saw the small bits of rust on the right side of the frame and in the mag well I about pooped my shorts considering the fact that it’s a $1400 gun😂
@SparksTheCreation9 жыл бұрын
What is the name of the steel wool?
@brownells9 жыл бұрын
We have a few various steel wool options depending on your needs or rust levels. You can check out your options here: bit.ly/1AbnOUT
@VagoniusThicket4 жыл бұрын
Try copper wool it is softer. Rogue River tools .
@moneymeance36478 жыл бұрын
sir I need help I got my llama cal. 380 out of storage n its rusty and it want cock back .there's rust in the barrel how do I get it too cock back
@brownells8 жыл бұрын
Dalroy, we suggest reaching out to our Gun Tech team to discuss your issue. This will allow them to assist you to the fullest extent! They can be reached by calling 800-7410-0015! Thank you so much!
@slvrktman78242 ай бұрын
Gibbs Oil and a soft cotton rag.
@StephenB27 жыл бұрын
what about in the barrel? I just bought a s and w shield and it has rust in the barrel but don't want to go trough the hassle of sending it back. I think I can just shoot it out. it is just light surface rust.
@brownells7 жыл бұрын
We would suggest cleaning the bore first with Hoppes as sometimes what appears to be rust is actually a rust preventative that has dried. If the pistol is new and does have actual rust in the barrel, contact S&W for a replacement barrel.
@blackemmons6 жыл бұрын
I thought the Shield was stainless. www.smith-wesson.com/firearms/mp-9-shield-0
@richardcarden41615 жыл бұрын
DO NOT try to "shoot it out".Use a good cleaner like Clenzoil and a phosphor bronze brush.After running patches through soaked with that cleaner you do not see anymore rust wipe it dry with a patch and apply a GOOD oil such as SAFARILAND BREAKFREE COLLECTORS OIL.I have found that oil if properly applied is the best long term storage protection you can use!
@Johnyrocket703 жыл бұрын
I put clp on a old gun. Let it sit for a few weeks and it wiped right off.
@olhemi13 жыл бұрын
😉👍☕
@tardwrangler7 жыл бұрын
My brand new 870 got rust after standing in the safe for a year. I swear I was oiling and cleaning that gun like a madman, but still :/
@thegoldencaulk27427 жыл бұрын
Thank Freedom Group
@michaelthomsen32466 жыл бұрын
Agreed. I have an 870 from 1980 that I used in the field all the time, took it him wipe it down, did a basic cleaning job then lite oil. No issues with that gun. Now I have a few 870s from post 2005 or so and they all start rusting at least a little if the whole gun isn't field stripped after every use.
@adammarshall806 жыл бұрын
if you get a newer Remington, duracoat it first chance you get.
@MattYoungDeveloper5 жыл бұрын
Had same issue. Blasted it with glass bead and cerekoted it, no more problems.
@richardcarden41615 жыл бұрын
@Matt Goodrich I swear by silicone gun socks.After treating it with Safariland Break Free Collector oil.It is the best I have ever used!
@NigelThornbery6 жыл бұрын
Your companies prices are so damn high you would think they could afford to film on a camera better than 240p in 2012.
@dylandewalt77276 жыл бұрын
itscold this videos from 2012
@dougwilliams445 жыл бұрын
Maybe, BUT they sell the best shit. Just sayin.
@muffemod5 жыл бұрын
This was filmed on VHS and then ripped to digital. The video upload is 2012 but it was filmed in the early 90s.
@dallas53745 жыл бұрын
They sell quality shit is why. You pay for what you get.
@onenikkione3 жыл бұрын
It's better to burn-out than it is to rust
@bidenstoletheelection91163 жыл бұрын
Do NOT use Flitz on Blued surfaces!, It WILL polish right through the bluing, Bluing is nothing more than a controlled rust, I ruined the finish on a 1957 4 digit Colt Python doing what he said with Flitz, You Don't want to use ANY polish!
@nialljamesbuckley6 жыл бұрын
Blood, mosquito repellent, sweat, humidity....hmmm check, check, check and check. Sure enough, I have some oxidation. Hopefully this helps!
@robertfandel94425 жыл бұрын
Mosquito repellent will also take the varnish right off a stock also
@Not_Sure_816 жыл бұрын
The thought of taking anything abrasive to my pre 64 winchester model 70 is terrifying. There's only a couple extremely tiny spots of very light surface rust near the scope mounts. So small and light i think I'll just let my rifle be. Far too valuable to risk any damage whatsoever
@Kyle_gallegher6 жыл бұрын
Recoil Junkie1981 soak it in clp so to speak and rub lightly a lot. You cant be afraid to moderately work on any of your guns if you intend to use them man.
@NoblesTx5 жыл бұрын
😂😂😂
@erikboink42805 жыл бұрын
Rust is damage by the way you have a rusty gun ha ha. I call mine trusty rusty
@Wearyman5 жыл бұрын
If you allow rust to take hold your Pre 64 will become post-functional quickly. folow the steps outlined in the video and you will keep that baby looking and running great for a lifetime and then some.
@onenikkione3 жыл бұрын
I took down my 1st deer with a pre 64 in Arizona
@bobkohl67797 жыл бұрын
Kroil and soft wood works better
@josephharris53462 жыл бұрын
Buying Brownells items thru Optics Planet will result in you having no warranty on the items.
@ParadigmUnkn0wn6 жыл бұрын
If this wasn't in potato-vision it'd be a really great video.
@drumhd15 жыл бұрын
ParadigmUnkn0wn Hahahaha!!
@jrdeckard33175 жыл бұрын
People that are too lazy to oil their guns, are too lazy to watch this video.
@richardcarden41615 жыл бұрын
Clean and oil the Damn thing every time it is fired.And even if it sits in your closet clean and oil it at least once a year.It is not that difficult just take care of it.
@blackrifle37425 жыл бұрын
Clean mine, im in a cold climate and take my ar15 out shooting occasionally. But the free floated handguard i have is a pain to take on an off so the surface of my barrel gets a little rust once an a while.
@laminarflow518 жыл бұрын
Would Scotch Brite also work?
@mainemade3003 жыл бұрын
Man I use hoops as a deodorant 👍🇺🇸⚓️
@mistergrendel322 жыл бұрын
What is hoops? 🤔
@brianmyers99895 жыл бұрын
I was thinking more Bob Ross.
@user-hy7cg9jg5r4 ай бұрын
Brand loyalty much?
@jaredf50003 жыл бұрын
ASMR
@brownells10 жыл бұрын
MrZacfisher, Birchwood Casey’s Barricade is an excellent all-weather rust preventative. The part number is 167-016-800 and is available at bit.ly/1msx3r2. Thanks for writing!
@johnstewart88493 жыл бұрын
SELL it!
@syvval65254 жыл бұрын
dead cats lmfao
@KEITHSMOTORBIKES3 жыл бұрын
cooking oil works well also, no joke
@cjfromgrovestreet4208 Жыл бұрын
Left my guns in hard cases for only a week and they all got pitted rust on the barrels.... 4000 dollars down the fucking drain. No one said cases are bad and I dont have a safe or money to get a safe at the moment. Basically domt buy guns if u cant get a safe. Or just wait till ur 30 or 40 and dont get 5 guns when your 19 because apparently I'm a dumbass
@10mmGlockJedi5 жыл бұрын
Informative, but the video quality is horrible.
@optiworldonline32165 жыл бұрын
Probably because it was shot in 2012, don't you think?