How to Oil and Lubricate Your Gun (and how NOT to)

[@peterpherfinion6671]

I'm a NRA Certified Pistol Instructor and former NACFI Instructor and this video is one of the finest, no-nonsense presentations on gun care I have seen in a long time. Most KZbin video jockeys will have you over lubricating your firearm and this gentlemen puts that silliness to rest quickly. I always worry that I have put "too" much lubrication on my 1911's (the rails and slide) and usually end up going through a dis-assembly prior to a range session. I use a standard white men's handkerchief and am always surprised by how MUCH lubrication I have left in the gun. As the man says, a light "sheen" is all you need. Great video! A must watch for any new gun owner or even old farts like me. Thank you for your service Sir.

[@garyggarner7738]

Peter Pherfinion Thank You For Your Information. I let several of my handguns set for over a year and had a sticky residue. I used Break Free CLP which I used in the Military. I cleaned all my weapons. So many oils out there. I used a synthetic lube called Liquid Bearing. I learned Previously I “over lubed’ my weapons which protected them for long term storage (I thought) but I learned I was wrong. The gun is dry from the factory. Only lube needed is just a light drop at friction points!

[@k_enn]

I have found that sometimes in freezing weather, the use of traditional gun oils on the slide and rails of the 1911 can have a tendency to get thick and slow down the slide. Years ago, Hoppes had a dry white teflon powder lubricant (not the spray) that I started using in that area. It was great. Sadly, Hoppes no longer makes it, but you can find it on-line from model railroad dealers.

[@williambyers6731]

Too much of a Good thing is not so Good.

[@Arthur172B]

As another "old fart", now 82, I have to make an unpopular comment here. In 1969 I joined a major (but not identified here) police department, and won the marksmanship trophy in the Academy, (after an intense tie- shoot-off) which then caused me to be INVITED to join the Department Pistol Team, as a rookie cop. Fantastic, unexpected, huge honor! But on this 10-man team, I was #10 because I qualified last. When I went to my first (department-paid) practice day, I discovered that I might NEVER, EVER be #9. They were that good. It was a hot day, and I saw the guys (no females I know of ever on the team) shooting away on the initial NRA three-gun stage, 22 rimfire, using semi-autos. I watched them dousing their slides with oil, and inquired how much to lube MY gun, a department-issued S&W. Response: "Until it drips off"! Oooo-Kay...IF you say so. It was because the oil is expected to disappear after a full day in the hot sun, banging away through two full courses of fire. And so it went for 3 years, when I suddenly was also invited to join an entirely new section just started by the city, called the Aviation Operations Section, and I was about to be trained as a helicopter pilot by recently-serving (in Viet Nam) US Army Warrant Officer Instructor-Pilots. My new Commanding Officer first told me to STOP the shooting! The flight training schedule (copied from the US Army) was very intense, and I was needed to fully participate, EVERY work day. So, I quit the Pistol Team, and never "practiced" again for 25 years, at the top of the Department, but NOT the team. But I still retired (from Aviation) with a box of 9 trophies, 8 first-place Individual, and one Second-place Team trophy) in the three standard shooting stages, and I was happy as a clam. And my guns stayed wet. Nowadays I shoot in a cool basement. Saves money on oil. Never had a stoppage in any caliber. Except for my issued Glock 22 at retirement, where I had the FIRST Department Glock to fail.

[@jasonweishaupt1828]

Transmission fluid. Farmers love it.

[@gettinstroppy9583]

THANK YOU! New gun owner looking for advice on cleaning and "lightly oiling", "how much is too much" etc. Looked at a number of videos and some people had their guns soaking in oil. That just didn't make sense at all so you can imagine how happy I was to see your video. Thank you again.

[@nicetna2010]

This video is further proof there is no replacement for experience, I learned quite a bit. Thx GunBlue490!

[@767dag]

Schön Yep. , you got respect this guy .... 2 seconds into it I like it

[@philstorsteen3389]

A huge volume of tips that I thank you for. You have simplified it for me.

[@buggy8887]

I'll trust the word of an older more experienced gentleman like this over anyone else. You can read on the internet as much as you want, but there is no replacement for real world experience and wisdom.

[@bigviper64]

I can listen ALL Day!..always interesting and “to the point!”

[@marcel-w7]

This content will surly survive the ages because it is the absolute truth. In his book: The M1911 COMPLETE OWNER’S GUIDE by Walt Kuleck, he states, “Its lubrication needs, are surprisingly minimal.” Thank you for your military service and a very educational video.

[@GunBlue490]

Thank you, Marcelino. I practice what I preach, as I never oil any of my guns, most particularly the ones I compete with, other than perhaps a wipe-down of blued guns to protect the finish during storage. My SR1911, and all my other handguns and rifles, shoot dry as a bone, as they have for thousands of rounds.

[@hccwarriordan5475]

So, I'm not the only 5th ID Vet watching KZbin in 2025. I hope your doing well .

[@FoxBonly]

I grew up with the attitude that if a little was good, a lot was better. I learned over and over again throughout my life that I was wrong, but just like the guy finding out after putting change in his left packet with an unknown hole for thirty years continues to put the change in that same pocket, because, well, that's how he's always done it, that was me. At 66, I've finally come to understand and completely agree with your video. Thanks. Good job sir. Kudos to you.

[@chrishuffman6734]

Wisdom from a man who's been around a while and apparently knows what he's talking about. Thank you sir!

[@coty5481]

It's been said that you learn something new every day. I sure did after watching this video. The past 25+ years I've been over oiling all of my guns. I was one of those guys that thought "if one or two drops is what's needed then three or four will be better". It almost pains me to admit it because I'm a career machinist/toolmaker and should've known better years ago. I have, however, been doing something right, and that's the silicon rag. It's been a constant fixture of my gun cleaning kit(s) since around 1989 or so. Thank you, sir, for the quality video. I'm subscribing to your channel right now. Above all though, thank you for your service to our country.

[@Robnord1]

Very well done sir! Years ago my father taught me similarly, and even cited examples of rust occurring under the glopped on grease and sticky coating ( I forget exactly what it's called) not only on guns, but other equipment in his military years. With all this "you gotta run the AR wet" talk out there, it's good to hear a voice of sanity and reason.

[@alanmeyers3957]

You do have to run an AR wet.

[@Robnord1]

​@@alanmeyers3957 I agree with our host who was a qualified military armorer and has many years experience with all types of auto and semi-auto weaponry. Spot oiling friction points is fine. We've proven it. I guess if I was stuck in a salt water spray environment and had to go days between maintenance, I *may* consider running my ARs wet, but doing it otherwise is just a waste of lube and attracts more dirt.

[@carlgomm9699]

I recently subscribed to your channel because of your no nonsense approach to firearms,I learned most of what I know about shooting from folks like you,this particular show caught my attention,thank you so much for for such a high quality show!!

[@GunBlue490]

Thank you!

[@Darkdally]

I just bought my first pistol, a Walther PPQ, and am glad I watched this video. Everything you said makes a lot of sense. I've been a mechanic for years, and I know how oil, moving parts, atmosphere, and debris can interact, but I never took it into account for my pistol. I live pretty high in the Rockies (over 9k ft), and will definitely take this all into account! Thank you sir.

[@Constitutionalable]

It makes more sense when you here from somebody that knows what they're talking about. Thank you.

[@boatboattmmrp9950]

This helped me oil my Martini Henry. I looked everywhere for a video like this. Simple and to the point.

[@michaelshort7297]

I recently purchased my first 1911 a Rock Island Armory A1-FS. I found your channel and I'm very happy with your no nonsense approach. Thank you for your time and effort bringing this information to all of us.

[@larryjamesdodson7661]

This is the best video on oiling a gun on youtube. Thanks for taking the time and effort to fully explain why . I thank you, and my brand new CZ 75 thanks you as well.

[@RickNethery]

Gunblue490 I agree with You completely. I am a USMC Veteran, and since My time in Service have worked many Years as an Industrial Mechanical Maintenance Millwright and a Lubrication Specialist. You gave good sound advice.

[@centex52]

Thank you sir for your service!

[@RickNethery]

Ronald Cash Your Welcome Sir

[@xredhotmaryx]

Poo

[@JeffersonClockWorks]

I've been overhauling clock movements for many years and have found the same info you stated. If you can see the oil, you put too much on. In clocks, the lube only helps break in the wearing parts. After that they run without lube for 20 years. If it was lubed, then it needs repairs every 4 years.

[@markbelden6919]

Very Interesting!

[@neenjaaa]

Thanks for your insight. As a locksmith I can assure you many people think more oil is better... or even trying to combine graphite with WD40 making sludge to an even worse effect

[@grndzro777]

Yup. The lube basically allows the parts to seat properly and then the oil molecules act like ball bearings between the metal. That's how car engines can last billions of revolutions.

[@me2bfc]

Your cleaning and oiling videos have saved me time, money, and wear on my guns. My cleaning process is streamlined, yet the guns are cleaner than ever.

[@turbotat5274]

Loved the video! Especially liked the "needle-point-application". Been carrying needles in the field forever and never thought of using the point to reduce the amount of oil applied to a tight spot. One too-big drop of oil in the wrong place can cost you some valuable time to correct the error. And the cold climate advice was not lost on this klutz. Good job, Captain!

[@garyggarner7738]

Excellent Video I Learned I was “over lubing”. In the Military I was using Break Free CLP. As I told Peter I learned what I was doing was totally wrong! I keep my guns Meticulously clean. I now clean and lube properly! I have a friend that “over oiled”. Thank You For Your Outstanding Video!! I recently used a product called liquid bearing. New synthetic. Your Video is one of the finest straightforward on Weapon care I have ever seen!

[@mattseidel6405]

Great advice, you had mention that you served in the Army, Thanks to you and all veterans!

[@eddieting4304]

Thank you Sir for the sound advice on KZbin. I live in Canada and love shooting in the winter. Your advice on oiling the gun in a cold climate is invaluable. God bless!

[@Tony2tall]

Very informative. My deceased grandfather advised me many years ago no oil was better than too much!

[@GunBlue490]

He had it right. Back in the day, everyone understood that oil ruined stocks, froze bolts in the cold, contaminated chambers, obstructed bores, and collected debris. The problem now is that many folks aren't getting their advice from their inheritance down through the family, so they're getting it on line from guys that often have no clue.

[@pickin4you]

Awesome video. I've been telling so many this very same thing, and they are hard headed and just do not believe it. Just an example, I bought a used T/C Classic .22lr semi auto rifle. The original owner said it would not fire and wanted to get rid of it. I tore it down, and clean so much crud from inside the action. It looked like a waxy black soot it was so bad. Once totally cleaned, and very little lube used, it ran for years without any issues at all. Just so many go oil crazy. Loved the video, and appreciate you taking the time to make it for all to see.

[@GunBlue490]

Thank you for sharing. I, too, have seen that sort of problem, many times, which was key to presenting the video. I recently saw a gentleman with a brand new SR-1911 that he returned to the dealer, whom I have known for decades, because it would not function properly. He said that every magazine produced stovepipes and failures to feed. Looking at it with the dealer, it was clear to see why, without even breaking the gun down. Every part of the gun was oily, including the magazine, to the degree that the ammo was oily. With no friction at the lips of the magazine and follower, the ammo simply spurted forward during the rearward opening of the slide prematurely, causing them to thrust upward with the bullet vertical as the slide moved into battery. The gun was stripped down and degreased, and the gun worked perfectly. The owner was advised of the problem, and to keep the gun dry or nearly so; most especially with no oil in the magazine. It went in one ear and out the other, with the owner informing us that he preferred to keep his guns well-oiled. This is why I take with a grain of salt the various complaints I see in the blogs about new guns malfunctioning!

[@no_handle_required]

Finally a sensible approach to gun maintenance.

[@Yosemite-George-61]

I'm an old USAF aircraft mechanic, the "over oiling" issue was talked about in training, it became a paste and wore out engine parts. In some hot places we used graphite spray. Thanks for your videos!

[@GunBlue490]

Thank you for your Service! Likewise, my factory training at S&W, Ruger, and Remington were consistent in teaching us to not "lubricate" guns for the reason you mentioned, as well as two other significant issues. Oil migration into the chamber prevents case adhesion and thwarts the required breech sealing that allows destructive hot gasses rearward, coupled with bolt thrust caused by case slippage that will fracture bolt lugs, or multiply breech force on auto pistols. The second problem is contamination and rotting of wood and even some plastics. Our Smith and Wesson instructor informed us that graphite was found to be abrasive to the case hardened parts, so he warned us against dry lubricants too.

[@danielcollins9850]

You are the only gun channel I watch now. I’m 41 I’ve been hunting for 30 years. I’ve killed many deer and everything else. Your just down to earth very gun smart person. Thank you.

[@michaelo1492]

I am so glad I found your channel under "gun care/cleaning". You have done a fantastic service to myself, and I hope others. I have subscribed to your channel , and will try to watch each video with out interruption. My wife was brought up in a gun free house, and with our oldest son serving overseas, she has come around to view firearms in a better light. Mike in IOWA THANK YOU for your service to our great nation !

[@GunBlue490]

Thank you, sir.

[@tennisguyky]

Thank you for such a concise, calm, educational tutorial! Very wise man. I just got a Smith Model 19 and this helped me a lot!

[@geoffreyshaw4689]

The wonderful thing about common sense is that it always sounds so darned good, you never get tired of it and this gentleman, GunBlue490, has it in spades!

[@SomeplaceWonderful]

Another great video. I live in the west and shoot either in the high desert or the Sierras; an overall elevation range of 2000-9000 feet. Both these environments seem to fit into you category of situations where lubrication can do more harm than good. Two factors I never took into consideration regarding to lubrication were the detrimental effects of temperature and sand; certainly not the potential for lubrication to freeze. You’re videos are extraordinarily educational and the presentation is equally remarkable. It reminds me of the days of my youth as a student in high school, AIT, and college; like being back in the classroom with one of my favorite teachers.

[@GunBlue490]

I appreciate your comments. Thanks for watching. I did an HD update of this video.

[@tiberiu_nicolae]

That's the best video on firearm oil. No sales pitch, just straight fact and experience. It is true that in northern Canada, if you oil your action, it will freeze solid at -40. Thank you!

[@Tully3674]

Anyone who can emphatically use the word 'bunk' in a sentence is trustworthy in my book! I've always learned something new (and that makes sense) in all your videos. Thank you.

[@NOBOX7]

Sir your wisdom is astonishing , very great information , your comment about the gun being made of harden steel brings it home about lubrication .

[@Digital_Photog1995]

Glad I viewed this video!! I have been over oiling my Ruger 22/45. I will be cleaning it today to remove the excess lubricant. Too many stove pipes last night ( one is too many). Previous trips to the range the Ruger functioned without any problems. Different ammo (CCI, Remington, Federal) all fire without any problems. This is the last time I will over lubricate any of my firearms. Thanks for this video!!!

[@GunBlue490]

+Fred Stafford You're welcome. Be sure to keep the interior of the magazine dry, which is a common cause of stovepipes, as the cartridges are thrust out by the magazine spring, rather than being stripped out by the bolt/slide.

[@burns2899]

Fred Stafford n. J

[@tomsmith1390]

I took the time to listen, been a shooter since 1959 and to here you tell it was perfect. Back in the day when oil was oil and winters came in New England I seen the affects of the old cardboard shot shells swelling and the affects of oil slowing down the action on dads Browning, Sweet Sixteen. Each would frustrate the man but rarely was that USMC Sargent needing that second shot. I can recall asking during a malfunction, what was wrong and there were times when he said the oil is frozen. We would sit down and clean the tube and bushings. Thank you for the time you spent in making this video and for the memory's of a time long ago that otherwise would have been forgotten.

[@terryschwartz5254]

This nice man has some of the most informative videos!

[@XRedJar]

This is exactly what I was taught in the Marine Corps. Thin, light coat is all you need. Good info, and glad I watched. I'll be breaking in 3 new rifles very soon, and I'll be making sure a thin, light coat is all I have.

[@PatriotSteve]

Glad I watched your video before cleaning my H&K for the first time. Some of these cleaning videos show people spraying oil in the internals of the frame like it's going out of style. It didn't seem right. The disadvantages of attracting dust and carbon mixed with the excess oil just makes so much sense. Thanks!

[@Raiders_Firewater]

No nonsense, right to the point, and true facts. Thank you

[@jasoneman8318]

I thank u sir! I was just talking to a friend of mine about the same thing about what u said not to much oil!! and I thank u also for your military service

[@blueballsexotics8596]

Now this is good stuff right here. Im a new shooter just bought by first gun les than a month ago, i knew from the start of the video this man had real knowledge, not like a lot of these other young know it alls on youtube. Thank you sir for your service and this video.

[@22tcm34]

I have learned so much in this channel wow YOU ARE COMPLETELY CORRECT YOU ARE FIREARMS A WIKIPEDIA

[@72pinebarron]

Wow. Brilliant. I just listened to this entire message. I am sitting at soccer practice with the phone on my chest watching my son play. It’s like a audio book. Thank you. P

[@jasonlloyd4955]

WOW, that was the best video I've seen on that topic. Thank you so much for the advice and help.

[@peshewa0529]

Enjoyed the video. I'm 63 and I was taught how to clean my rifle and shotgun by my Dad and he used very little oil if any. We lived in Ohio and I would clean my guns when I got back from hunting especially if it had been raining. I would just wipe them down. I still have both of them and they still function as when I got them. Thanks for the video.

[@GunBlue490]

You're welcome. Our Dads came from a generation that understood that oil destroys wood very soon, and that the least drop wiped on the steel was all that was needed to protect the gun for generations. They put good oil in their cars, but left the oil can in the garage! A $10.00 desk stapler gets a harder workout than any gun, and I've yet to see an oil can on a secretary's desk.

[@danielguadian5676]

Thanks for the sound advice. It made me realize I might be leaving my guns a little too wet. I mainly use Hoppe's stuff & G96. I think I'll get my guns & give them a wipe down with a clean rag. I subbed. God bless you, Long Live the Republic.

[@teefrankenstein4340]

Thanks you for this video. Being a rookie to shooting, I have been guilty of over-lubrication. I now use a lot less oil, with better results.

[@TheRagingHillbilly]

I love your videos. I wish I would have found them a long time ago. Can you do one on dry firing and myths surrounding that?

[@marklamasky6304]

Thanks for sharing your top notch experience. I did buy LSA lubricant and flannel material. It works really good and the LSA is fantastic. Watching videos have help me and learn from your experience. We are all lucky for you to share your experience.

[@GunBlue490]

Thank you and God bless.

[@bobbymcguyer]

I'm an old Marine and I really identify with your advice. The drier you keep the weapon, the better off. Do you remember that hideous "lubriplate" that was given the Marine Corps and Army in the 50's ? What a joke; it resulted in more jams that anything else I know. Great advice; thanks.

[@wabblewater]

Was always told to use crisco on my m14 also cpl brb usmc

[@ShoneDaddy]

“You don’t want oil getting on your gun bag, you don’t want you know oil stained clothing” lmao unintentionally hilarious. Great video.

[@paulsimmons5726]

This video should be required watching for any new gun owners. Come to think of it, probably a bunch of so-called experts could pick up something too. Great video, thanks for sharing your experience.

[@MrDrumsPhilAmbros]

I MUST SAY YOU ARE THE MASTER RIGHT TO THE POINT BIG HELP THANK YOU

[@darylmullen5201]

I have learned so very much from your videos. Some things like this may seem basic, but I use videos like this to help me train my wife in firearms practices. So thank you very much.

[@thormusique]

Thanks for this! It's great to hear some good, solid, practical advice for a change, as opposed to what we see from everyone merely concerned with selling us the latest and greatest space-age miracle lube.

[@jkollar109]

Love watching his videos. No substitute for knowledge, wisdom and experience.

[@1HeavyHitr]

GunBlue490 - saving the modern shooting world one video at a time! LOL. Keep the videos coming!

[@doughoblitt4642]

I have been around firearms my entire life, shooting almost daily, during certain seasons, and for the most part, cleaning them incorrectly apparently! Your video was enlightening and helpful, will be changing my techniques from now on. I enjoy all your videos, and also learned a lot from your reloading techniques as well. Please keep em coming, God bless

[@adtube4186]

This reminds me of my BMX days. I would oil a new chain once lightly and wipe it off with a t shirt then clean and re oil about every 500 miles. guys that were obsessed with oiling every day or sometimes every 5 minutes had the most chain/sprocket issues mostly from collecting dirt

[@johnharvey892]

Thank you so much for this video. I know you posted this for years ago but right now on KZbin there is an onslaught of videos talking about Gun oil being junk.... And you're better off using some car lubricant like mobile one. Apparently it's all the rage right now to say that the gun lubricants are ripping people off because they're overpriced. Your video is the one that people need to be watching. One video I watched was a guy that claimed he put over 2500 rounds through his AR in 4 days. I did leave a comment to him that that was pretty excessive and worrying about what kind of lubricant he was using was mute. I would be more worried about throat erosion and excessive wear on the rifling. I just want to thank you for posting a video that sets the record straight.

[@GunBlue490]

john harvey You are correct. Even in military combat, soldiers will clean their arms at least daily, and rarely would a person expend greater than 200 rounds. 300 is the logistical military supply for each soldier. That sort of endurance trial for a privately owned barrel and expensive ammo would be pretty silly and costly. Now, to be very frank, I don't believe a word of his outlandish claim that would have cost him the price of two and one half cases of ammo. He's either a liar with a gun or a silly person with a gun. Either way...

[@rcacase]

ABSOLUTELY Love this guy, GunBlue490 you are pure gold. I researched what I heard here. PURE gold.

[@allenknight555]

I just found your channel last night and I'm glad I did. Thanks for setting me straight on this stuff.

[@ksdad2two]

thank you for your advice, I will use gun oil very lightly like you said, I trust your advice more than everyone else trying to market there so called best lubricant, thank you again :)

[@pillowvillegunrepair6583]

Much of the work I do on malfunctioning firearms is due to over oiling. I tell my customers that where oil is concerned, less is more. Good vid.

[@johncrosby6590]

This is a great video. Thank you very much!

[@Tech158A]

Great video. More shooters need to see this. For that matter anyone who works on any type of machinery should heed your words about over lubrication. I've seen just as many problems from over lubrication as under in my career.

[@GunBlue490]

Thank you for your supportive comment. You are entirely correct. As for firearms, I can name a host of problems that I encountered in decades as armorer that all could be traced to oil and grease, and there was not ONE instance where a dry gun failed to operate properly or broke down prematurely. I'm not an advocate of keeping a gun bone dry, and I always keep a light film of gun oil on guns for protection from corrosion, but if I were operating in dusty climates, I would not use even the slightest, and with moisture being a component of most corrosion, what would be the purpose?

[@MPGunther1]

Thank you sir, enjoyed your video

[@jamesbronson12]

It's good to hear some real talk from someone who is telling the truth and not trying to sell something.

[@paulhicks451]

i am going to clean my guns again and make sure they are not oily. I just cleaned my new Kel-Tec Sub 2000 and sparingly put some oil on the bolt, but I'm going to make sure it's dry, and clean it every use. Hickok45 doesn't even recommend using oil as GunBlue490 said, so my Glock is dry but clean.

[@IamDoogy]

Hickock45 Is a big advocate for BALISTOL. He says it alters the surface of the metal after prolonged use.

[@sfen2405]

WOW! Just reading your answers, to the comment section, has answered almost all of the questions that I have had about gun and rifle care. Too much to digest at this time! I'll have to get back to you on the rest (if any). You have a new subscriber! Thank you for sharing all the useful information!!

[@Rod1Malkin]

Brilliant! the Ben Franklin of Firearm Knowledge! God's Love for It!!

[@rickdavis4740]

Your AR cleaning video is the best!! I love how thoroughly you explain things & I appreciate the knowledge you pass on. Your segment on 22lr is amazing too!! I'm so thankful I discovered your channel

[@MiscerVids]

So glad i watched this video. Im picking up a new S&W Shield today and was going to oil the hell out of it

[@daviebaggins]

I have the same gun and did the same thing😂 i was greasing the heck out of it with heavy bearing grease. Cleaned that off and changed my ways. This channels a wonderful resource.

[@Pinrod93]

Some good advice, thanks! I've been shooting and gunsmithing my entire life. I'm now 58. I agree you should over oil a gun inside or out, however, I've seen guns fail to function because of the lack of lubrication! I use Break Free CLP, it is the best I've ever used. Break Free also has a "Collector" oil that is good for the outside surfaces. It dries quickly and resist smudges and finger prints. Another good product that will protect the outside surfaces of you firearms if Thompson & Center Bore Butter made for muzzle loaders. It is a wax that won't interact with black powder! I have used it on the surfaces of my modern firearms and it protects them well! Just some of my tips and ideas that work for me! David Barr

[@robertmaybeth3434]

Chief I almost thought you said "In the army, they issued LSD..." Ok ok, damn good advice chief!

[@esreverniytilaer3510]

It was between 1955 and 1967.

[@rayleewayne9109]

That was the CIA, not the Army.

[@aaronrollo7370]

Ahhh. The MK Ultra program. God damn CIA.

[@antmark1960]

i am 54 years old, everytime i watch one of your videos i learn something new,or it already confirms something i wasnt sure on. keep up the goodwork. cheers.

[@GunBlue490]

Thank you for that!

[@joegray3309]

I guess because I'm a mechanic I use air tool oil on my guns but I agree very little not very often works good enough.

[@azbootsnsand]

Thanks for taking the time to share your wisdom and experience. As a relatively new gun owner, the information was incredibly valuable to me. None of my family members possess an interest in firearms so I largely rely on the internet to expand my understanding. I wish I had known these tips when I purchased my first firearm about a year ago. At the time, I thought the more oil the merrier so I would liberally spray Rem Oil all over the external and internal components of my Taurus PT709. Although it worked flawlessly out of the box, it wasn't long before it began malfunctioning left and right. Ultimately, I was forced to send it back to the manufacturer and since they didn't have the necessary repair parts on hand, they were kind enough to offer a replacement. I’m hoping to use this new-found advice to prevent such mishaps on my new pistol. Please consider posting a video showing us how you clean and lubricate a pistol. Also, what is your opinion on lubricating magazines? I've heard conflicting opinions on the matter. Thanks and God bless.

[@GunBlue490]

As stated in the video, lubrication attracts debris, and debris is a cause for malfunction. I consider oil in a magazine to be a contaminant, and to be avoided at all costs. All good magazines are designed to work completely dry. If they ship with protective oil, it should be removed with a good solvent, and dried. Some people seem to get upset by the squeak of a magazine, which they think means oil is required. FEEDING is the only requirement of a magazine, and most good magazines squeak, just like a bedspring. The correct amount of oil is simple. None. Oil in a magazine transfers oil to the ammo. That's VERY bad. On a 1-10 scale, it's a 0. Oily ammo can cause severe, damaging, and even dangerous bolt-face thrust, because the brass cannot properly cling to the chamber until pressure drops to zero, and the cartridge head is thrust rearward with unintended force. Not only can it destroy a gun in quick order, it can also take a gun apart in your face. Chambers and ammo must always be free of oil. Likewise, if you oil any other part of a gun, that oil will eventually migrate to the chamber. Not to mention ruining good gun holster leather, your grip on the gun during firing, etc. Further, all guns are tested dry, as they are put together. Certain points within a gun work correctly with dry resistance, and will often have issues with lubrication. A gentleman very recently showed me his brand new 1911 that was stove-piping, with both original factory magazines, and he wanted to send it back to the factory. I could see immediately what was going on. He had an oil fetish, big-time, with oil everywhere, oozing from every part of the gun. He complained that his ammo wouldn't stay in the magazines, squirting out. After everything was degreased and dried completely, his gun and magazines worked as they were intended. He still wanted to know how much oil he could safely put in the gun and magazines, and didn't believe anything I told him, even after his problem was demonstrated graphically. Magazines operate perfectly when dry, but may slip-feed out of order without metal-to-metal resistance, which was his problem; a common one. I have seen many such magazines where ammo slides forward and won't stay put. That's the common cause for stove-piping, miss-feeding, and a plethora of problems. I carried a duty firearm for 30 years, and my personal weapon daily for 15 years, and NEVER oiled any part of them. Simple cleaning is 100% gun care, and nothing more is required. That was my recommendation for hundreds of students over those years, which is in accord with all the manufacturer recommendations. Oil in magazines is real trouble, as was discovered in Vietnam, as it was contaminating ammo and getting into chambers. I've often heard folks who should know better that an AR-15 works best wet with oil. That's wrong, misguided, and silly folklore malarkey. A wet AR-15 is like any other firearm and is made to work with everything dry. A wet chamber is dangerous, no matter what the model number is stamped on it. The bolt will never stop working if left dry, and it will never wear out. Too many people have an oil fetish these days. Just keep things clean, and you'll never have any issues with anything, and your gun will fire all day and last ten life-times. It'll actually stay clean longer, too. Clean the insides of the magazines with Hoppe's and then dry them thoroughly, which is all they need for perfect function. A magazine that does not work when dry needs to be put to a vise and replaced.

[@azbootsnsand]

GunBlue490 Thank you very much for the prompt, detailed response. Another question if you don't mind: How do you prevent over-lubricating a pistol if you clean and lubricate with the same product (e.g. Rem Oil)? Although I use Hoppe's No. 9 to clean my barrel and recoil spring (not sure if I should be doing the latter), what I usually do is use a product like Rem Oil to spray the internal components of the firearm and slide, scrub them with a toothbrush, and clean up with cotton swabs and patches. However, the oil is very thin and naturally finds its way in between all the components. What would you do in that case? It's virtually impossible to clean up all the residual oil. Thanks again.

[@GunBlue490]

azbootsnsand Apologies that I didn't see your question earlier. I just found it among my old emails. Your question contains the answer. Spray oils like Rem-Oil (and there are many others) do indeed find their way into all recesses, and are difficult to control, which is exactly why I find no use for them, whatsoever. When a drop of oil is more than enough, they deliver a half teaspoon with barely a half burst, and are entirely uncontrollable. Good powder solvents such as Hoppe's and other similar non-oil products are compounds that clean the metal, and then largely evaporate. Whatever remains after evaporation is in no way detrimental to gun function, and will not attract dirt and carbon. I don't know why you are using two products to do the same job for different components. The same Hoppe's that effectively cleans your baked-on barrel will do a fabulous job on the passive carbon found elsewhere, and won't leave you with a slimy gun afterward. Wood gun stocks quickly soak up anything you put on your gun metal, whether it's Hoppe's, Ballistol, Rem-Oil, CLP, gun oil, or whatever, which is NOT a good thing. Large amounts of any lubricant are detrimental to everything except the stockholders of the lubrication products. Rem-Oil was first introduced to the public back in the 70's, with wee-small eye-dropper style plastic vials packaged in gun boxes, with the clear intent being to manage lubrication with a drop on friction points. Little tiny bottles appeared on store shelves. I suspect that it wasn't selling fast enough, so it soon came out in spay cans that evacuate all contents uncontrollably, sending customers back to Wall-Mart for more. Sure Rem-Oil it cleans off dirt. Any oil--even dirty old motor oil from your lawnmower--has outstanding solvent properties, but oils should not be used as solvents, for the reasons you cited. CLP is a great solvent-cleaner, but works no better than regular solvents, and costs many times more. Again, it was first issued to troops in small vials, then in small dropper bottles. But, as with Rem-Oil, it soon became available on shelves in spray bottles that empty in seconds, sucking money out of your back pocket in the process. Stick with solvents for cleaning, and use oily lubricants SPARINGLY, if at all. Don't make the assumption that because Remington markets Rem-Oil, that the designers and builders of their firearms have voiced an endorsement for spraying it on willy-nilly. The fact is that Rem-Oil is an outstanding marketing program, with the name carrying that implied consent, and I would not be at all surprised if it makes more money than their firearms division. There's nothing magic about it. It's a thin viscosity light oil that is not at all different than your grandmother's Singer Sewing machine oil, Daisy BB gun oil, or ordinary 3-IN-1 oil that was on your great grandfather's tool bench. Whatever claims are made by the manufacturer, it accomplishes the same goals for proper lubrication, and causes the same headaches with over-lubrication. Use with discretion.

[@azbootsnsand]

GunBlue490 No worries. Thanks again for your input.

[@MrLex87]

I've been shooting guns since i was a 12 and my Pops always told me to use very little oil because like you said Oil attracts dust and particals in the air. I see alot of my friends that has same guns as me, such as my Ruger 10/22 Never had Not 1 jam or fail to feed problem, They always as me why my Guns Never have a problem and i tell them STOP Over Oiling. Shit when they bring there guns out each time they shoot thats all you see fly outa the reciver is Oil LOL ....So yes Mr. Gun Blue you are very correct..thanks

[@GunBlue490]

I've seen that too, Alex. Thanks, and good shooting!

[@alaskajohn5695]

Excellent Excellent Hands-on-Advice. Just discovered your channel and subscriped. Was hunting in the mountains of Alaska high attitude, some 8-degress. My reliable Model Remington 700 froze up, firing pin, due to over oiling, cost me an Alaska Trophy Mountain Goat, could not believe what was happening, the rifle was useless. I'm retired State Trooper, firearms instructor, and should have known better. I put one drop of oil in the firing pin area of the rifle, due to hunting on the coast, salt water conditions, it all worked against me. You have a Great Channel and years of Knowledge, Thank You, Alaska John

[@nickparimuha81]

I agree and disagree to a extent.. for anything other than a semi automatic rifle I agree a small light film works wonders.. however for when I was in the marines I cant tell you how many dry rifles would malfunction and then the the RSO would come by with a spray bottle of clp and rack it a few times get it wet and it would run... on the other hand I saw many M2's in Afghanistan fail because guys would lube them up and on convoys get dust all over the gun and cause malfunctions... the trick to that was to cover the moving parts with lsa then cover the gun with trash bags and duck tape and remove when you knew you were in the area where small arms fire would be probable .. so I personally keep a wet bolt on my personal ar with 10w-30 motor oil and close the dust cover ... after I shoot I wipe the dirty oil off give the chamber area a once over then re apply oil and store

[@kennethpitt4382]

As a Marine vet (71-75) we used LSA for our M-14 and M-16. We were taught a very light coat, just a drop or two. I never had a problem.

[@raymondstrehl3679]

Thank you sir for taking the time. God bless

[@boutcha1]

I have owned my latest Glock for over a year and have not oiled it yet. Not true with my AR bolt.

[@evanmarks7912]

boutcha it don't need a lot of lube either

[@BlackHawkPSU]

Best advice/video on gun care on the net! I see so many people bathing their guns in oil thinking they were doing good by it. Listen to this man GunBlue490!

[@dekir7663]

SHORTLY ; WD-40 FOR CLEANING AND ATF FOR LUBRICATING ?

[@-o-The-Duke-o-]

This is a good heavy dose of wisdom shared free of charge. Thank you for taking the time to share it with us all. I'm subscribing so I don't miss another gem like this.

[@samueltorres7555]

Thank you sir. Not a gunker anymore. :-)

[@pravoslavn]

Love your videos. They are made from a real abundance of information between the ear ! I think you took speaking lessons somewhere along the line, because in the last 7 years your presentations have (thankfully) lost all the UhhhhMmmmm's's and AaaaHhhh's. You are now a top-notch presenter, Sir ! Right up there with Paul Harrell and Chris Baker and Twang'n'Bang. Your videos are a delight.

[@kayakdog121]

I haven't oiled my guns in years. I knew my laziness would eventually pay off.

[@jc.1191]

🤣

[@Ali-Muscle]

😆

[@excelsior6365]

Best way to drive the resale value of any gun by 50 to 90 % I know off.

[@garys5540]

I don't know much about rifles. So, I was just wondering how to clean it when I go to pick up my Savage B17. This vid taught me so much and a simple basic way even I can understand!! Thanks much Sir!

[@pyrofful]

so a dab will do yeah

[@voodosforever]

“BRYLCREAM: A Little Dab’ll Do Ya!” Signed, 58-year-old firearms owner and hunter

[@tarasbulba3190]

I don't recommend using Brylcreem on your firearms.

[@lenwalker7393]

This video contains excellent practical knowledge and advice for all experience levels of shooters. Many instructional videos contain lots of advice without explaining the justification for what is being recommended. This video explains the why. Carry on!

[@lesrinehartlr]

I have three bottles of gun oil..Hoppe's. Hoppe's and Hoppe's

[@igregmart]

Great advise. I don't understand all these guys out there talking about all these fancy oils and greases. Some of them even have multiple steps to apply them. I'm a 30 year retired state investigator and now am a part time licensed PI and own two handguns, Walther PPK (.380) and Ruger LC9. After every range visit I use a decent gun cleaner, like Hoppes or Hoppes Elite,and then a few drops of Rem Oil on a cloth and wipe em down. Not a big project. I usually carry the PPK and, God-forbid, if I ever had to use it I'm sure it will get the job done.

[@GunBlue490]

That's exactly right. It's not a big project. Thanks.

[@docholidayproductions]

Everytime I come back to this video my like has disappeared!

[@41alone]

yeah happens to me on outher video's also youtube wants to control who popular

[@Brewmaster721]

Love all your videos!! God bless you sir, you are a wealth of information and a KZbin treasure!!

[@Sams911]

so in a nutshell, don't oil your guns? I don't get it... I have kept my guns liberally oiled for decades.. they look as good as new. Must work pretty good.

[@bbqaustin9606]

He didn't say "don't oil your guns..." He said "Keep it clean, and lightly oiled with a wipe of a soft oiled cloth" Just a "whiff" of oil-- no visible residue!

[@DeeMoback]

SJ there's a difference between outside of a gun and inside a gun/rifle...... on outside I do use 10w40 on a rag sometimes to wipe a gun down after somebody handled it.....never use thick oil like that on a small bore high pressure rifle on the inside..... very bad Karma

[@egads2]

Liberally is the catch word.

[@charleshill5975]

SJ They look new, of course, but what about the working parts of the gun?

[@tiberiu_nicolae]

Maybe get a dictionary and rewatch the video.