Construction process for an Electric Hydrofoil convertible to an Electricjetsurf. More Photo on Facebook www.facebook.c... or Instagram / brucecreations Music by Rian Little Iced veins
Пікірлер: 119
@johnmellor30482 жыл бұрын
Two thumbs up. Standing ovation. I'm 68 years old and have worked with composites for a good long while. Your project, in it's entirety, is DAMN impressive!
@Brucecreations772 жыл бұрын
If you like, take a look also in the other videos, there is something particular in each one.
@drrock53562 жыл бұрын
Jesus Christ! I work with carbon, and I've never seen anyone take it to the level you make. Not in automotive, aerospace, or otherwise. Just what I needed to see to inspire me to level up. Maybe in this lifetime, if I'm lucky.
@Brucecreations772 жыл бұрын
What appreciations!! :) thanks a lot
@sonnijonny4 жыл бұрын
Piece of ART! Best build i have seen so far!
@Abarth695Maserati4 жыл бұрын
Love your Carbon Fiber work, very clean
@laithcoory78074 жыл бұрын
Your carbon work is like no other I've seen, you sir are gifted.
@neilmans90013 жыл бұрын
Incredible build champ! I been building jetboards for a while now. Some do 70km/hr.. So I have a fair bit of respect from what you have done! Brilliant work!!
@Brucecreations773 жыл бұрын
Thanks a lot I'pleased that you like. What a kind of jet board did you build, electric or gasoline!
@illhamakbar54673 жыл бұрын
This is another level of self production
@TomFly2 жыл бұрын
What a piece of art. 👍
@Lolzomolo3 жыл бұрын
HOLY S*** That is ART
@zero00tolerance8 ай бұрын
This is amazing work, and one of its kind! Some talented people out there in the world.
@sethblack53094 жыл бұрын
I wish there was more video of it being used. Looks gorgeous though.
@diveflyfish3 жыл бұрын
Phenomenal. Thank you for sharing your excellence.
@christainhutzelr39004 жыл бұрын
Hi I have building a Jetboard from MHz kit for 2 years. Small tips for the motor replace the watercooling with larger hoses and cool the MGM Esc extra. I manage with 16 kW when I cool the outrunner outside with viscosity spinges. With Magnetic switch have you installed because with everyone falls when jumping and diving. Cheers Chris from Germany
@Brucecreations774 жыл бұрын
Hi, for the kill switch I used "Apico lanyard kill switch", you have to take care to seal the bottom. Just a question, how many poles did you set in the controller and how many degrees?
@christainhutzelr39004 жыл бұрын
@@Brucecreations77 20 poles and 15 or 17 degrees. Take care of the c11 cable that quickly breaks the cable. I fixed it with hot glue because I already bought 4 cables. But the cable for the kill switch is on the side or did you stick it in? Oh, if you want to apply the setting, you'd better delete everything and never connect it to another laptop !!!
@joselkite4 жыл бұрын
Eres un artista,me he quedado hipnotizado viendo el video y el resultado,chapó👏👏👏👏👏👏
@Brucecreations774 жыл бұрын
Grazie!
@romahab10 ай бұрын
Очень качественно сделал. Руки ровные у тебя
@zamka213 жыл бұрын
Good job, Bruce.
@sc0or19 күн бұрын
And what is a conclusion at the end: jet or helix? I know that a helix is more efficient than a jet, but here we have a different point where a force is applied. So, may be adds to a stability (but it works against a rear wing..)?
@MrDoyley353 жыл бұрын
Very nice. Love the concept. Jet board and foil in one module. Amazing skills with the carbon fiber and battery build. Just Awesome. Have you thought of incorporating a flap mechanism into the foil to increase the lift at lower speeds and/or reduce wing size for higher speeds? That might help improve efficiency.
@Brucecreations773 жыл бұрын
It takes a lot of time and work for this configuration, I can't imagine to add a mechanized flap
@JohnyCaffe4 жыл бұрын
great job Bruce... looks like 1000 hours work
@Brucecreations774 жыл бұрын
more or less.... : )
@derrickboatman1560 Жыл бұрын
Slick. Wouldn't the intake work better in the front though? Really cool idea. Bet those will be expensive.
@fabionicolini5614 жыл бұрын
Bruce. Ti sei davvero superato. Complimenti.
@Brucecreations774 жыл бұрын
Grazie, è abbastanza stiloso?
@scottybeegood2 жыл бұрын
Beautiful!
@francescacannizzaro75544 жыл бұрын
Speechless, breathless. The one.
@ExpatLifeMike3 жыл бұрын
Hey Bruce awesome work I have been waiting for some to make something like this. I always wanted the efoil but then esurf/Jetsurf looked like a whole another sport. So I see you have the mast open to bring the water to jet pump. This is pretty amazing now you don't have to seal the motor from water corrosion. Not sure if you are in Europe but if you sell boards or molds I would be interested in know what the price would be.
@Brucecreations773 жыл бұрын
Hi Michael, I'm from Italy. If you have some specific question give me an e mail at brucecreations@gmail.com
@MaciejPiotrowski4 жыл бұрын
Amazing construction !!!
@Seamanforever3 жыл бұрын
Very interesting project, my compliments ;)
@PerWiklund2344 жыл бұрын
Really impressive
@george-34123 жыл бұрын
You make it look soooo easy.
@techustle14 жыл бұрын
Awesome and beautiful work. Always love your boxed foil designs and this one is above and beyond! Enjoyed watching the construction and the seeing what went in to making this awesome machine. So the plan is to create conversion kit for already built gas powered jetsurf boards? Or will this design be released for public consumption. Is it surfable? Meaning power on to the wave back off the throttle and let the foil do the work and surf the wave? Is it possible for the motor to regen the battery while on the wave the water being pushed through motor? Thinking might be possible due to the direction of the fin blades unless there is a way to switch prop fin direction. Sorry for the long comment that should have been a email.
@sergeigarbar18962 жыл бұрын
how did you calculate and make underwter wing? in aviation: lots of airfoils, they chnge rom fuselage to wingtip, there is wing reverse twist. byt eye you may catch one degree, but for hydrodynamics 10 degre minutes will mean a lot. i did not see u use micrometers or anything. how did you make them? simply copied??? you ame make just a tiny assymetrical and get aelerons effect.
@unchartedgroupielove4 жыл бұрын
Mate this is incredible!! Where did you get the different carbon patterns from? I'm across the ditch in Aus 😎 keep up the good work
@Brucecreations774 жыл бұрын
Send me an Email
@ikshanmo31783 жыл бұрын
Very inspiring
@JetSurfingNation4 жыл бұрын
Keep riding!!
@lawmansama3 жыл бұрын
the intake at the bottom for your water jet propulsion is intriguing and beautiful but i cant help but think that, that now adds more weight with all the water inside the water foil pillar. Wouldnt it also cause more drag because the water no longer flows around the pillar, but into it ? both these concerns combined would slow it down considerably? idk, I'm not an engineer just curious.
@zanesimmonds5306 Жыл бұрын
It is a water jet so the principle makes sense but the way it was done is probably not ideal. I would be interested to see what the efficiency of this set up is.
@mghemke4 жыл бұрын
I want to know all your secrets. The tooling at 3:38 to make the boxwing made my jaw hit the floor.
@Brucecreations774 жыл бұрын
You have to wait a little bit. A complete construction of this mould will be done in the video of my lastest model of hydrofoil box wing. Stay tuned!
@Brucecreations774 жыл бұрын
Here you can find some more steps, the mold is the same kzbin.info/www/bejne/eH-agnh7nZuZq6s
@mauromariani4120 Жыл бұрын
You are a genius
@Brucecreations77 Жыл бұрын
Esagerato... Grazie!
@alexsousa33102 жыл бұрын
hello, very nice project, I am 3n in the process of making a jet surf with 3 engines, I wanted to know what material is used to make the joints, greetings
@SONO4B11T Жыл бұрын
What are you making your gaskets from ? Fantastic build👏
@Brucecreations7711 ай бұрын
Thanks, I used this material www.easycomposites.eu/xencast-px30-soft-flexible-polyurethane-rubber But for correct sealing a good shape of the gaskets is very important. They must be collapsable.
@maximebertrand6843 жыл бұрын
Nice job seriously ! Do you have EPS foam under the glass ?
@Brucecreations773 жыл бұрын
I used eps foam only for the model
@rumtum993 жыл бұрын
Outstanding
@DerDampfHans3 жыл бұрын
Does the jet drive suck the water through the lower opening on the foil? Otherwise you have no more propulsion when the board lifts out of the water. BTW nice video
@Brucecreations773 жыл бұрын
Yes, there are no problems about that. It works also in steady condition if you elevate the board by hand. When you are running, the speed push the water through the mast reducing the power needed for the suction
@vladislavkuba58376 ай бұрын
I don't think you can propel the vehicle with the water jet alone, without an impeller in the water.
@plan92033 жыл бұрын
How do you prevent the weave from fraying when cutting your carbon? Like on your symbol / name.
@Brucecreations773 жыл бұрын
Hi, in this project I used cured fabrics for the graphics, so you don't have any problem of fraying
@MrDenisJoshua3 жыл бұрын
Sorry... I so a lot of type of carbon fiber procedure. But I like a lot the one that you use... can you tell me witch is the name of this procedure please ? (02:55) So beautifool board... I need to make a e-foil board. Thanks a lot
@Brucecreations773 жыл бұрын
It is an infusion process. In the video you can't see that around the box, in the bottom, there is a vacuum ring. In this way the resin flow trought the whole box
@MrDenisJoshua3 жыл бұрын
@@Brucecreations77 Thanks a lot... I'll search and learn this type of process :-)
@nlieske4 жыл бұрын
Awesome carbon work! What material did you use to make the seal? Great idea.
@Brucecreations774 жыл бұрын
I used flexible polyurethane www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/casting-resin/Xencast-PX30-Soft-Flexible-Polyurethane-Rubber.html
@giordijacky64777 ай бұрын
Bonjour, vos créations sont incroyables ! Possibilité de rentrer en contact ? Vous fabriquer pour des clients ?
@indohai3 жыл бұрын
Sickkkk!
@hjl40044 жыл бұрын
Hi there Bruce, once again amazing what you did there. What drive are you using? Is that the MHZ 65 or the 80?
@Brucecreations774 жыл бұрын
If you are searching for a worse supplier and terrible quality MHZ is your choice! I used the 64 at first, but it last more or less in 10 minutes (the stator had a terrible braking). Of course they didn't recognize anything. I had no choice so I bought the 80. Also the Scorpion Motor give me some problems, I asked to the technical assistance for some info and they said to me.... I'm sorry I never used it I don't know (we are discussing about a 1K euro brushless motor)
@hjl40044 жыл бұрын
Brucecreations wow that’s terrible: Didn’t expect that! But you got things working all the same? Looks awesome, can you share some more details of the driveline? BTW thanks for the awesome feed!
@peterkay74583 жыл бұрын
@@Brucecreations77 the noise I heard that 64/5 made me question it's durability
@darkdragonentertainment87783 жыл бұрын
strait legendary
@Trawe14 жыл бұрын
Nice video, you always wondering me ! I long time want make a two piece molded board like this. One question missing me always and this video not answered my problem :( How you glued together the two piece the board top and the bottom ? (it's hard enough and seal the water)
@Brucecreations774 жыл бұрын
Yes, the two half are glued together. After tath I put a carbon fiber strip on the corner
@coolfiy20053 жыл бұрын
What is the thickness of this surfboard? What model is the motor? I am also making this electric surfboard recently.
@Brucecreations773 жыл бұрын
The thickness is around 11 cm. The motor is scorpion but is the more expensive and unreliable motor that I've seen
@silvanoguglielmoni3 жыл бұрын
Fantastic work, very beautiful. Do you intend to put the engine on the foil? Do you intend to sell in jetboard version? Congratulations on the fantastic job. a masterpiece.
@Brucecreations773 жыл бұрын
Grazie, l'idea era quella di avere un jetsurf che diventasse jet foil. Quindi con il motore piazzato nella tavola potevi fare entrambe le cose.
@silvanoguglielmoni3 жыл бұрын
Molto bene, intendi commercializzare in futuro?
@Brucecreations773 жыл бұрын
@@silvanoguglielmoni non nell'immediato vorrei ho in mente un paio di migliorie per renderlo più fruibile ma prima devo finire un efoil classico ed un paio di progetti in ambito kitesurf
@silvanoguglielmoni3 жыл бұрын
@@Brucecreations77 Sei italiano? Mio padre è italiano, ma io sono brasiliano. Farai un E-foil ?
@Brucecreations773 жыл бұрын
@@silvanoguglielmoni si, visto il tuo nome pensavo fossi italiano e mi pareva stupido parlarti in inglese. In questo momento sto lavorando su un e foil tradizionale curando però in maniera partricolare estetica (almeno ci provo) e profili alari. Poi ritorno sul foil per kite (box wing ovviamente) e per finire una divisibile per kite un pò anticonvenzionale
@grady19823 жыл бұрын
When will there be an update on this ?
@Brucecreations773 жыл бұрын
I learned a lot on this project but I'm not sure if is a good idea to share these experiences with some producers that are waiting to make money with it.
Can you make a foil like that, that could attach to a jetsurf race?
@Brucecreations774 жыл бұрын
This was the aim of the project
@mikeoakes7474 жыл бұрын
@@Brucecreations77 that would be awesome.. would make it so people who already have a board wouldn't have to waste the money for the electric conversion kit, could just somehow attach this to existing gas board
@kaiunjun5913 жыл бұрын
Pro
@paolod8534 жыл бұрын
Spettacolo
@sushigang93634 жыл бұрын
Hey I am really interested in making one of these is there anyway u could link all the Materials u used to make this. Also could u make a more detailed tutorial this video was a bit confusing. Thanks love ur vids. 😄
@Brucecreations774 жыл бұрын
Send me an e mail
@sushigang93634 жыл бұрын
Brucecreations what’s ur email
@Brucecreations774 жыл бұрын
@@sushigang9363 it is at the end of each video
@sushigang93634 жыл бұрын
Brucecreations kk
@sushigang93634 жыл бұрын
Brucecreations hey I sent u an email
@giggynox2 ай бұрын
Kunstwerk
@ak77ru182 жыл бұрын
What is the green logo made of?
@Brucecreations772 жыл бұрын
Is made with a carbon fiber and glass fiber fabric. The glass fiber is colored of course
@user-zf1op8vk4s4 жыл бұрын
Перешли ликало😜🙏
@frenkloyd4277 Жыл бұрын
WOW
@surytx4 жыл бұрын
Wow
@ilFly074 жыл бұрын
Porca tr... Sempre il numero 1...
@ygreq3 жыл бұрын
Too bad you did not write something / anything about each step.