I want to build this project without the home automation part. Which parts of the code should i change?
@orr4945 Жыл бұрын
Nice project!, can you please provide us with a link for buying the glove?
@Emtron_Technologies Жыл бұрын
its a custom made glove. Use any glove and attach a flex sensor to it.
@SandraNakamyuka21 күн бұрын
So how does one respond back who doesn't know sign language
@mrigankamouliacharya86725 жыл бұрын
What will happen if I didn't write the fuse bit as mention by you (i.e.D8FF)? Because once I write this fusebit microcontroller stop responding to my usbasp programmer.There is another problem I have faced that after burn your HEX file into microcontroller.Display just showing only block nothing else.I have checked all the connection tried with different developement boards.
@Emtron_Technologies5 жыл бұрын
0xD8FF, Fuse bytes will not stop you from programming usbasp. It will sets external crystal oscillator & other settings. Their usb be problem with your hardware.
@yashsharma1165 жыл бұрын
Hi. I have replicated the entire transmitter circuit but on power on my lcd gets stuck with all black boxes in its top row. I have burned the same hex file provided by you. Please help me fix this issue. It's urgent. Thanks
@Emtron_Technologies5 жыл бұрын
Check the LCD connections to the controller. System produces a beep sound during power up (If the controller is programmed correct & properly configured).
@MohitTomar_6 жыл бұрын
Sir your video is very useful and u have demonstrated it in good manner ..But sir i have a doubt that how you are changing the mode from vioce recognition to device control ...Please explian it
@Emtron_Technologies6 жыл бұрын
Thanks for watching. By using ZERO gesture symbol. It mentioned in the video. I think you missed it.
@kolhatkarchinmay7 жыл бұрын
awesome...but how you are programming Apr33a3 externally?? it needs to be loaded with voice using microphone.
@Emtron_Technologies7 жыл бұрын
Yes, You have to program it through switches(externally). It can hold upto 8 channels. Can you elaborate on your doubt ?
@kolhatkarchinmay7 жыл бұрын
BSP Embed actually I got confused becoz you have return the sentences in the program..now I realize those are to be displayed on the lcd. thanks for clearing my doubt..keep up the good work..
@aryanbarnawal30616 жыл бұрын
after making all the connections our LCD is turned on but it is not intializing. It is just showing a line of blocks. What could possibly be the reason?
@Emtron_Technologies6 жыл бұрын
Check LCD pins connections WRT the PORT defined in the program. And check weather the microcontroller is running ?
@mrigankamouliacharya86725 жыл бұрын
Hi Aryan, Are you able to solve this problem? I am facing the same problem. Can you please share your experience.
@mrigankamouliacharya86725 жыл бұрын
If I wish to change the display port as follows PB0=RS ; PB2= EN ; and Data Pin= PB4-PB7. what changes should I do and which section of the program,please guide.
@Emtron_Technologies5 жыл бұрын
You have to make change in APP.h header file.
@bandiyamuna9586 жыл бұрын
Sir would you please explain how exactly smart gloves work. Whether they work based on bending angle or based on number of fingers bending
@Emtron_Technologies6 жыл бұрын
It's combination of both.
@suryaaitha20745 жыл бұрын
instead of atmega microcontroller we can use wemos d1 esp8266 microcontroller... if we use wemos what are the changes to made in program...is it ok for all interfacing... and y it is only restricted to 8 values in calibration...what is the device it is restrictibg for
@Emtron_Technologies5 жыл бұрын
You required 5 channel ADC to interface Gloves. Wemos d1 , ESP don't have enough ADC channels.
@vjraja1005 жыл бұрын
You have given the Value of R21 in the RF receiver as “R”? What should I use here?
@Emtron_Technologies5 жыл бұрын
10K
@KrishanKumar-qk9sh5 жыл бұрын
sir can you explain the function of CALIB SWITCH in detal
@Emtron_Technologies5 жыл бұрын
It's for calibrating the sign languages. To enter into the calibration mode. Press & Hold the switch during power up.
@suryaaitha20745 жыл бұрын
hlo.. here u have stored up to only 8 symbols in calibration...why we cant store more than 8 symbols... actually why we are storing 8 symbols.in calibration mode....
@Emtron_Technologies5 жыл бұрын
You can store more gesture symbols.
@devshreemehta12707 жыл бұрын
sir why we have used that attiny 2313 and which compiler we have used for it and why didn't v use atmega32 der instead of that attiny
@Emtron_Technologies7 жыл бұрын
ATTiny2313 is a 20Pin IC, which is sufficient for this application. I used Atmel Studio (AVR Gcc) compiler for both microcontrollers.
@madhugoswami51415 жыл бұрын
hi sir i want this coding asap and im unable to understand the coding u have provided
@Emtron_Technologies5 жыл бұрын
You can download from GitHub.
@devshreemehta12707 жыл бұрын
I have one more doubt sir why we have chosen a atmega microcontroller and not pic microcontroller or arm ...
@Emtron_Technologies7 жыл бұрын
Compiler for AVR Atmega32a is Free (Open source), Easily available, Low cost and rich in features.
@bhargavchauhan67225 жыл бұрын
sir just got stuck on one problem, the project is not going into device mode can u give the possible reasons? also can u say the resistance values displayed on screen when we go to device mode?
@Emtron_Technologies5 жыл бұрын
You can calibrate the gesture for device mode during Initialisation.
@vjraja1005 жыл бұрын
In the 434Hz RF Rx module, terminal 3 (Linear Out) is connected to VCC and not terminal 4 right?
@Emtron_Technologies5 жыл бұрын
Vcc to 5V, Gnd to Gnd, Dout (linear out) to Din of Decoder.
@sanjaydheeran37406 жыл бұрын
I would like to know value of the resistors used in whole circuits........and I have doubt in building a circuits.....
@Emtron_Technologies6 жыл бұрын
Please check the circuit diagram.
@sabarikannan24316 жыл бұрын
We checked that we want your contact Bro....
@devshreemehta12707 жыл бұрын
Thnkuu so much for replying to my every doubt .... n sry to disturb u ... thnkuuu
@devshreemehta12707 жыл бұрын
sir the circuit diagram is implemented as it is on the hardware means m just learning this things sry for this silly doubt plz rply if u can....
@Emtron_Technologies7 жыл бұрын
Yes, you are right. Thanks for watching. Please learning.
@aryanmodi46086 жыл бұрын
i am not getting the connections of flex sensor. Do we have to give 5 volt to one pin and take the output though the other pin while connecting it to ground?
@Emtron_Technologies6 жыл бұрын
Flex sensor is connected to uC ADC through potential divider network. One end of Flex sensor is connected to 5V & other end to 33K. The other end of resistor is connected to Ground. The junction point Flex sensor & resistor is connected to ADC.
@rajeeshramankutty76145 жыл бұрын
sir, how i program atmega 32 and atttiny without any constraints of bend angle ? pls mail me the complete project details . because i am very impressed with this project and i brought all the components but i am confused in the coding part. pls attach the complete project to my mail.
@Emtron_Technologies5 жыл бұрын
You have to use AVR ISP Programmer to program ATMega32 & ATTiny. You can download all the details from GitHub.
@ahmadyogaswara79217 жыл бұрын
Excuse me, I want to ask. what is the benefit of making this tool?
@Emtron_Technologies7 жыл бұрын
Its useful for the deaf & dumb people. BTW, Thanks for watching.
@vjraja1005 жыл бұрын
Unable to get a hold of the BS250 transistor. Can you suggest any replacement?
@Emtron_Technologies5 жыл бұрын
You can use BC547.
@AbhaySingh-qs8fk Жыл бұрын
Can anyone help me to program my atmega32a. I did not get what file is to be selected.
@nightstone13 жыл бұрын
sir, can you tell how to connect the flex sensor with cable?, are they soldering?
@Emtron_Technologies3 жыл бұрын
Check the circuit diagram.
@nightstone13 жыл бұрын
i mean in minute 0:23 the pin flex sensor connect to cable on covering black , how u coonect them
@Emtron_Technologies3 жыл бұрын
@@nightstone1 Flex sensor has two wires. one pin connected to 5v and other pin is connected to 10K resistor. It's like potential divider network.
@vjraja1005 жыл бұрын
In the APR33A3 module, in the circuit diagram are the connections from 3-10 to M8 to M1 respectively?
@Emtron_Technologies5 жыл бұрын
Yes.
@bhargavchauhan67225 жыл бұрын
Bro from where did u get apr33a3 module??
@vjraja1005 жыл бұрын
Bhargav Chauhan Amazon. Here’s the link: Robocraze 8 Channel Voice Recorder and Playback APR33A3 RC-A-325 www.amazon.in/dp/B0784LD33N/ref=cm_sw_r_cp_api_i_yyzyCb224D5JV
@MdHasan-uz2mn4 жыл бұрын
How much this project costs to complete? In rupees or dollar, please
@Emtron_Technologies4 жыл бұрын
Development cost will be 15000.
@bhargavchauhan67226 жыл бұрын
@BSP Embed sir i am not getting apr33a3 module in my locality and also i thought of making one but the apr33a3 ic is bit costly so is there any replacement for it?? Or i havr to use that only Does the code changes if i use any another audio recorder playback ic??
@Emtron_Technologies6 жыл бұрын
It depends on the module. APR is very easy to use.
@bhargavchauhan67226 жыл бұрын
@@Emtron_Technologies ok thanks sir
@satyaprasanthni89826 жыл бұрын
tell me about calib switch. i want to know the switch position whether the position is always on or off.
@Emtron_Technologies6 жыл бұрын
It's a tactile switch. it will always be in Logic 1, When you press, It will asserted to LOW 0.
@Upendrakumar-ux5dr6 жыл бұрын
Sir how total project will cost? I want to make it for my major project please reply?
@Emtron_Technologies6 жыл бұрын
We don't sell the projects.
@ravalitalluri65726 жыл бұрын
sir, can u plz explain me how to use bluetooth in this poject, and how much cost for doing this project....
@Emtron_Technologies6 жыл бұрын
Instead of RF Module use HC05/HC06 bluetooth module And make it battery operated. Currently i'm busy with other projects, so couldn't do it.
@swapnilkatke11527 жыл бұрын
I want to make the same device can you help and what's the total cost of the device?
@Emtron_Technologies7 жыл бұрын
Thanks for watching. Please send me a mail to bsp.embed@gmail.com
@satyaprasanthni89826 жыл бұрын
if i want to use 3 flex sensors. should i have to make any changes in the programe or can i dump same program. to get 8 voice out put
@Emtron_Technologies6 жыл бұрын
You have to make changes in the program. 8 different gestures for 8 voice O/P
@aryanmodi46086 жыл бұрын
Bs250 is not available and we need it urgently. Is there any other alternative of Bs250?
@aryanmodi46086 жыл бұрын
Can we use CL100S npn medium power transistor or BC107B npn transistor or bc337 NPN general purpose transistor? Suggest
@Emtron_Technologies6 жыл бұрын
You can use BC337
@lohith2419 Жыл бұрын
Sir hello calibration means like we can assign anything different statement also like hello,how r u ?.What is u r age ?.
@Emtron_Technologies Жыл бұрын
Yes, You can assign different values, according your project requirements.
@sridevipoluparthi94666 жыл бұрын
We are doing project on this...could you please send me the .hex file for this project.we tried the program bt it's throwing an error at app.h files.please help me with this
@nithinreddygovindugari42616 жыл бұрын
Sridevi Poluparthi can you please tell me where you bought the tools required . I am doing the same project
@Emtron_Technologies6 жыл бұрын
Will send you the Hex file ASAP.
@sridevipoluparthi94666 жыл бұрын
Please send me the hex file as early as possible.. Please
@rasaqsodiq78974 жыл бұрын
Can I build something Like this using labview
@Emtron_Technologies4 жыл бұрын
Sorry, I have no idea.
@castorkajois17056 жыл бұрын
sir thanx alot for good demostration
@Emtron_Technologies6 жыл бұрын
Thanks for watching. Please keep in touch with us.
@_MukteshwariMirge7 ай бұрын
How do we burn hex file on microcontroller?
@iankehnsanchez25825 жыл бұрын
sir, I can also put the APR33A3 Voice Recorder & Playback into the ATTiny2313 right?
@Emtron_Technologies5 жыл бұрын
Yes, You can.
@iankehnsanchez25825 жыл бұрын
Sir, can I ask where can I buy the APR33A3?
@nareshrao74912 жыл бұрын
sir , Instead of microcontroller can i use raspberry pi, if yes, how it
@Emtron_Technologies2 жыл бұрын
Yes you can use it.
@abubakrbhatti12884 жыл бұрын
sir i want github link for this project i cant find one in the description kindly help me
@Emtron_Technologies4 жыл бұрын
Sorry for the inconvenience to you. We have removed the code from the GitHub due to some technical issues.
@GoodLuck-yu5fi5 жыл бұрын
can we use avr isp programmer instead of atmega mkii?... Also can we use progisp instead of avrdudes?
@Emtron_Technologies5 жыл бұрын
AVR ISP can used instead instead MKII & AVR Dude.
@MohitKumar-ct6te6 жыл бұрын
i wanna do ths as my final yr project..cn u plz help me ..i need to buy ths project..whats the cost
@Emtron_Technologies6 жыл бұрын
Currently i'm busy with our projects. You can built yourself, as all the details are available in the video description.
@VijayYadav-em8mu6 жыл бұрын
hii mohit kumar apne ye project bnya tha kya agr bnya tha plz help me agr apke pas h project h ya kuch bi related info shrare plz its request mail id:raovijaydelhi@gmail.com
@biginepallivandana99886 жыл бұрын
How much does the project cost if we order you and how many days it will take
@Emtron_Technologies6 жыл бұрын
Sorry. I'm busy with other projects. Don't have enough time to make it.
@devshreemehta12707 жыл бұрын
sir which software did you use for simulation of the project can I use any software like Proteus or multisim or I have to use some specific software...
@Emtron_Technologies7 жыл бұрын
I have not used any simulation software. You can use Proteus.
@devshreemehta12707 жыл бұрын
BSP Embed ... K thnkuu sir
@vijayhegde6896 жыл бұрын
sir code downloaded from your below given link has lot of error sir can u send me exact prg since im not familiar with prg language
@ramandeepsrivastav99915 жыл бұрын
im also working on same project with the help of arduino.Can u help me to understand talkie library.
@Emtron_Technologies5 жыл бұрын
Sorry, I haven't used that library.
@ramandeepsrivastav99915 жыл бұрын
@@Emtron_Technologies okk , but plz try it once . it will be vry kind of you if you help me to understand it. thnx
@amirthav26744 жыл бұрын
Hii can u plzz help me to build this what
@sridevipoluparthi94666 жыл бұрын
Is it possible to increase the signs with this same project? Or do we need any further modifications?
@Emtron_Technologies6 жыл бұрын
You can easily increase signs with NO modification in hardware.
@sridevipoluparthi94666 жыл бұрын
Thank you for reply. Can we use AP8942A instead of APR33A3?
@aryanmodi46086 жыл бұрын
Can You (BSP Embed) please explain how we increase the no of signs storage from 8 to let say 20?
@Emtron_Technologies6 жыл бұрын
If you can program(or Embed) voice into AP8942A, Then you can. And the voice length is 42 seconds.
@Emtron_Technologies6 жыл бұрын
Use different gesture & ADD the ADC values for the gesture into the lookup table.
@vrushabhmoon63754 жыл бұрын
how to dump code in atmega32A using atmel studio and which program file we have to use???
@Emtron_Technologies4 жыл бұрын
In the Atmel studio. create a new project, select a target controller. (In this case its ATMEGA32A). Include the .c and provide the path for .h files. and in the build tab. Build the solution. Which will create an Hex file. This Hex file will be programmed into the controller.
@vrushabhmoon63754 жыл бұрын
@@Emtron_Technologies can you make a short video tutorial of it please
@Emtron_Technologies4 жыл бұрын
@@vrushabhmoon6375 Sure, Will try to do it. But don't wait for our video tutorial.
@vrushabhmoon63754 жыл бұрын
@@Emtron_Technologies then can you plz give me a step by step guide of atmel studio Actually i am new to atmel studio i dont know anything about it
@vrushabhmoon63754 жыл бұрын
@@Emtron_Technologies or can you give the hex file of both the transmitter and reciever??
@tamirattesfaye3068 Жыл бұрын
please show how to code the project in the description many code are there but difficult to understand also your email address
@i_abhayjha6 жыл бұрын
Can you help me with program files of this project.
@Emtron_Technologies6 жыл бұрын
All the files(.c, .h and even the Hex file) are available in the GitHub. Link is given in the description.
@bhargavchauhan67225 жыл бұрын
Sir if i calibrate the glove and after that if i restart the device again would it retain previous calibration or it would restore the default one in code?
@Emtron_Technologies5 жыл бұрын
It will retain in Memory.
@aryanmodi46086 жыл бұрын
sir, where did you connect the output of dc dc converter. Is it in the lcd.If yes where exactly?
@aryanmodi46086 жыл бұрын
It is not clear in the circuit diagram provided in the link.
@Emtron_Technologies6 жыл бұрын
Converter provides 5V from LiPo battery, which is the power supply for the entire circuit. It is connected to all modules(LCD, uC, RF Tx, Voice board).
@terrymorrow18704 жыл бұрын
Hey I want you to tell me the meant for both word DEAF and DUMB?
@Emtron_Technologies4 жыл бұрын
This kit is for people who can't speak.
@Emtron_Technologies4 жыл бұрын
Sorry, I not getting you.
@dczeditography4 жыл бұрын
Which IC kit is using for programming ATmega 32
@Emtron_Technologies4 жыл бұрын
AVR ISP Programmer..
@Nomankhan-jv1nk6 жыл бұрын
sir i am doing this project as my final year project. but sir i want to print all english alphabets(26). so i cant use APR33A3 because it has only 8 channel. so what should i do?? any suggestion??
@Emtron_Technologies6 жыл бұрын
You have to use I2C base MP3 player Module with SD card interface.
@Nomankhan-jv1nk6 жыл бұрын
mayank mehndiratta still working brother it will take some time
@eliyaskhan69705 жыл бұрын
How to buy this project I want to buy what is the cost of it please
@Emtron_Technologies5 жыл бұрын
Sorry, we don't sell these projects.
@rishabhrai62644 ай бұрын
your provide hex file are not working
@lohith2419 Жыл бұрын
Sir how can I contact u iam thinking to make my mini project on this can u tell me how much cost did the components took
@Emtron_Technologies Жыл бұрын
Approximately 5000.
@maynardsoriano42095 жыл бұрын
Can i ask about all the cost of this project sir? ist high? cause we will make a proposal like this in our school
@Emtron_Technologies5 жыл бұрын
Sorry, Currently we are not in the position to sell these projects.
@dczeditography4 жыл бұрын
How do we program the Atmega32 and ATtiny2313 ?
@Emtron_Technologies4 жыл бұрын
using AVR ISP Programmer.
@vjraja1005 жыл бұрын
Is there any way to program without using ATMEL AVR ISP MKII?
@vjraja1005 жыл бұрын
If yes, do you suggest I buy this or is there a cheaper alternative?
@vjraja1005 жыл бұрын
Can i use USBASP AVR ISP Programmer?
@Emtron_Technologies5 жыл бұрын
Yes you can use USBASP.
@vjraja1005 жыл бұрын
@@Emtron_Technologies Thank you so much for the prompt reply. You have a separate circuit for regulated supply. (Conv from 230V to 5V) Is it okay if I use a 5V source directly? (Using Power supply module?)
@Emtron_Technologies5 жыл бұрын
Yes you can use.
@bhargavchauhan67226 жыл бұрын
Which file is to be burn on the avr?? The transmitter and receiver hex file?? And can u help me how to program the avr?
@Emtron_Technologies6 жыл бұрын
There are two units. Transmitter & Receiver. You have to program/burn Transmitter.hex to Tx & same for receiver.
@bhargavchauhan67226 жыл бұрын
I dont have an usbasp but i want to use arduino as isp can u guide me?
@Emtron_Technologies6 жыл бұрын
You will get an tutorial on KZbin using arduino as programmer.
@bhargavchauhan67226 жыл бұрын
@@Emtron_Technologies but can i dump the same hex file using arduino...coz arduino ide only uploads its own c files which u write on the screen
@Emtron_Technologies6 жыл бұрын
You can check this tutorial. www.instructables.com/id/Programming-AVR-With-Arduino-As-ISP-Without-Bootlo/
@sohebshaikh65265 жыл бұрын
Sir show us the connection being made !!plz
@Emtron_Technologies4 жыл бұрын
Please check the circuit diagram.
@rakshitmittal40986 жыл бұрын
i want to make the same project with raspberry pi
@Emtron_Technologies6 жыл бұрын
RPi is an high-end system. It's an overkill for this system.
@arulthomas26215 жыл бұрын
great bro...... even an person is dumb he can make an public speeking
@Emtron_Technologies5 жыл бұрын
Thanks for the feedback. Thanks. Keep in-touch with us.
@abdullahmamun23966 жыл бұрын
sir i have a doubt ,, is all codes are being uploaded into microcontroller ????
@Emtron_Technologies6 жыл бұрын
You have to compile all the code to generate one Hex file. For compiling you need to use ATMEL Studio 7
@alaahamid1048 Жыл бұрын
May I know how much code was written?
@Emtron_Technologies Жыл бұрын
Please check the video description.
@biginepallivandana99887 жыл бұрын
how can i understand and dump the code into the circuit
@Emtron_Technologies7 жыл бұрын
If you know c programming, You can easily understand the code. You can dump using AVR ISP Programmer.
@biginepallivandana99887 жыл бұрын
BSP Embed thank u
@bandiyamuna9586 жыл бұрын
may I know the cost of components for doing this project
@Emtron_Technologies6 жыл бұрын
Approximately 3000 Rupees.
@bandiyamuna9586 жыл бұрын
Sir there in the project how u have recorded your voice for 4 gestures. Can we use any no. of gestures?
@Emtron_Technologies6 жыл бұрын
Recorder manually. It has microphone in the APR board. And you can have any number of gestures.
@sanjaydheeran37406 жыл бұрын
I need a complete circuit diagram...
@Emtron_Technologies6 жыл бұрын
Circuit diagram is available in the GitHub. Link is given in the video description.
@omkarchavan89915 жыл бұрын
Such a nice project 👌👌
@Emtron_Technologies5 жыл бұрын
Thanks for the feedback.
@aarthigopal90075 жыл бұрын
Sir, would I be able to purchase this product?
@Emtron_Technologies5 жыл бұрын
Sorry, currently we don't have an facility to sell these projects.
@vandanmshah5 жыл бұрын
Can i directly burn your hex file in the mcu? Will it work?
@Emtron_Technologies5 жыл бұрын
Yes, You can. It will work.
@vandanmshah5 жыл бұрын
I have been trying to burn it using AvrDude but doesn't work. Can u please help
@Emtron_Technologies5 жыл бұрын
Check the hardware connection.
@harikrishnan76366 жыл бұрын
Can we use msp430 instead of ATMega32a microcontroller??
@Emtron_Technologies6 жыл бұрын
Yes you can use. But you have to port the code to MSP.
@boopalans59856 жыл бұрын
BSP Embed sir how can we get the code for msp 430 ... We are not familiar with that... So can help us?
@saiakunuru922 жыл бұрын
Sir I want to buy this product
@Emtron_Technologies2 жыл бұрын
Please send a mail to bsp.embed@gmail.com
@achuthm82633 жыл бұрын
Flex sensors used are of 2.2" or 4.5"??
@Emtron_Technologies3 жыл бұрын
4.5 inch
@balureddy49775 жыл бұрын
What is the total cost of that project sir?
@Emtron_Technologies5 жыл бұрын
Currently we don't have facility to sell these projects.
@luminous67035 жыл бұрын
I am also working on this same project using arduino mega. I could'nt figure out the code for this. Can anyone please tell the code for it?
@Emtron_Technologies5 жыл бұрын
Will make the same project with Arduino in our upcoming episodes.
@luminous67035 жыл бұрын
@@Emtron_Technologies our final year project work is going on..so can you please tell the code alone for it?. . luminouskokis@gmail.com
@Emtron_Technologies5 жыл бұрын
Sorry, We have other projects inline.
@nanu17936 жыл бұрын
I'm trying to recreate the same idea but with arduino UNO... and I'm struggling *.* Can anyone PLEASE help me with the code??
@allmightqs16795 жыл бұрын
What help do you need?
@nanu17935 жыл бұрын
@@allmightqs1679 Thank you so much, I figured it out
@mrigankamouliacharya86725 жыл бұрын
Hi, I am also interested to make it through Arduino, can you please share your experiences or code
@rambillichandrakala48486 жыл бұрын
Can we implement it by using ATmega16 microcontroller?
@Emtron_Technologies6 жыл бұрын
Yes You can.
@rambillichandrakala48486 жыл бұрын
Thank you for reply sir.we are doing project on in it.could you send the datasheet of this project.plz help me with this sir
@Emtron_Technologies6 жыл бұрын
All the details are available in the video description. You can download from GitHub.
@praveenboddu36295 жыл бұрын
How much is estimated cost of this project?
@Emtron_Technologies5 жыл бұрын
Around 8000/-
@biginepallivandana99887 жыл бұрын
Where did you connect the adc from flex sensors?
@Emtron_Technologies4 жыл бұрын
Flex sensor is connected to an ADC through potential divider network.
@shekinahsardonyx13965 жыл бұрын
Can i know the values of resistors used
@Emtron_Technologies5 жыл бұрын
Check the circuit diagram.
@vandanmshah5 жыл бұрын
What to set the fuse bit values for atmega32A
@Emtron_Technologies5 жыл бұрын
0xD8FF
@vjraja1005 жыл бұрын
Specifications for the SMPS please?
@Emtron_Technologies5 жыл бұрын
12V, 500mA.
@vjraja1005 жыл бұрын
@@Emtron_Technologies Can I use 12V, 1A?
@poojashastry7176 жыл бұрын
sir instead of flex sensor can we use accelerometre sensor
@Emtron_Technologies6 жыл бұрын
Yes you can use.
@sushmitamanakatti25724 жыл бұрын
hello maam did u do this project ? i am in need of help would you help me please send me your email. I,m a student
@crystalkids76025 жыл бұрын
Is their a way I can this gloves from you. Pls ans fast
@Emtron_Technologies5 жыл бұрын
Sorry, currently we don't have an facility to sell these projects.
@crystalkids76025 жыл бұрын
@@Emtron_Technologies so van you tell me very briefly how to make it
@Emtron_Technologies5 жыл бұрын
You can download all the details from GitHub. Link is given in the video description.
@nehabramhe86226 ай бұрын
how to upload a which code i am confused so please help please
@Emtron_Technologies6 ай бұрын
You have to compile all the c code to generate Hex file, Then upload that hex file.
@nehabramhe86226 ай бұрын
@@Emtron_Technologies dont know which upload a code becasue i use a first time microchip studio
@ahmadyogaswara79217 жыл бұрын
if i want to use that glove to motor driver how to do it?
@Emtron_Technologies7 жыл бұрын
Use the motor driver circuit in the receiver.
@jaswanthvishalp68966 жыл бұрын
Wat if I need to load more sign language values sir
@Emtron_Technologies6 жыл бұрын
You have add digital values of the pattern in an array.
@sridevipoluparthi94666 жыл бұрын
Instead of ATTiny2313 microcontroller is there any alternative to use? Please tell me the component specification if it possible.
@Emtron_Technologies6 жыл бұрын
You can use any controller. Please check the circuit diagram. Link is given in the description.
@tarabnaveed69525 жыл бұрын
Do we apply 5V to each flex sensor?
@Emtron_Technologies5 жыл бұрын
Check the circuit diagram.
@SkylasH75 жыл бұрын
Sir i am unable to open the github file can u please help me with that.
@Emtron_Technologies5 жыл бұрын
Download as ZIP file from GitHub and extract.
@amalp.k13816 жыл бұрын
Can I use 2.2 inch flex sensor?
@Emtron_Technologies6 жыл бұрын
Yes, you can use.
@amalp.k13816 жыл бұрын
BSP Embed sir I like to do this project for science fair....if u can help us plss mail is to amalpklive@gmail.com ... this is a great project sir...i like to make it!
@shreyaspoojary27025 жыл бұрын
Nice project sir, I want to do this please give me the pcb layout file of project
@Emtron_Technologies5 жыл бұрын
Sorry, We don't supply only PCB. We supply Full project.
@shreyaspoojary27025 жыл бұрын
@@Emtron_Technologies what is the cost of project sir
@Emtron_Technologies5 жыл бұрын
@@shreyaspoojary2702 Please mail to bsp.embed@gmail.com
@harisb16766 жыл бұрын
can i implement this using arduino? pls help me..!!
@Emtron_Technologies6 жыл бұрын
Yes, You can. You have to rewrite the code for Arduino.