Two .60 cal Ball... The Multi-ball Round Enigma gets SOLVED!

We folks... the multi-ball enigma took a while to solve, but I think that we have a few winners here! Hope y'all enjoy the video!!
Click on the link below to get 10% off of your total order with Marty’s Molds: www.martysarms...
/ bubbarountreeoutdoors
www.bubbarountr...
www.kicks-ind.com
www.ballisticpr...
leeprecision.com/
www.precisionr...
www.amazon.com...
www.truglo.com
www.swumphunter...
www.hoorag.com
kramerleather.c...
www.osceolahat...
www.lymanprodu...
www.rhinoboat.com

[@marklacombe2671]

You are the Matthew 4:19 of shotgun reloading. I do mean that with the utmost respect as I have just ordered my very basic set up and components I happened to luck into some primed hulls but I am trying my hand at this because of your videos. Cheer's brother and thank you.

[@jasonsliger5430]

I really appreciate this information! I also appreciate your ability to control yourself from using bad language, can't always say that for myself. Take care!

[@brettvibbert5001]

I've had one of those molds for several years and I was gonna ask you about loading those , but you beat me to it.

[@brettvibbert5001]

and is it possible to star crimp those or just strictly roll crimp

[@waptek2]

using a tough shot cup/wad with a .5 inch paper wad in it & spherical buffer around the 60 cal balls = 6 inch group at 55 yards

[@FnLn55]

That must be fun. What choke did you use? 👍 Did you ever try plain paper wraps inside the cup instead of buffer? 👍

[@johnnycrouse4603]

Thanks for this one Wade! You just seem to make things work when some others would have already given up. I appreciate what you do sir. God bless!

[@andrewkelso3532]

Great stuff again Wade !!!

[@macguyverson9370]

Thanks, great video and good tip on the bingo cards!- Ryan

[@gailjordan1689]

This setup seems very similar to the Dixie slugs ‘Tri-ball” load. We’ve used those for years with good results.

[@juniorsamples1276]

Got me interested in reloading my own buckshot, great info wade.

[@nikitamckeever5403]

Excellent , thank you from 🇬🇧

[@Harpplayer504]

I am hooked on quality video content, information is knowledge! This experience is second to none,and is willing to teach ! I don't know about y'all but ,I enjoy watching 🦌 hunting,but I love the science of firearms! Thanks Professor! Ha Ha!

[@johnparrish9215]

I've heard you talk before about the bright lights being hot, I've had the same problem but found a solution. Get some exterior LED lights and set them up to bounce the light off the wall or ceiling, this softens the light and cuts down shadows plus the LED lights run a lot cooler. Hope it helps.

[@charlesdriggers199]

Wade . I really like these rounds. They are going to be sure enough effective .

[@kimoowens4171]

Thanks Wade, now you got me thinking how to make that in a 2 3/4 8-)

[@michaelbarrett2346]

Thank you Wade

[@BubbaRountreeOutdoors]

My pleasure Michael...

[@danpisula3531]

Love your buckshot and Multi ball rounds videos.

[@Lowcountryoutdoorsman]

Got to take that one to the woods I want to see it in action as always I learned something god bless

[@webcaster]

Another great video. Thanks Wade

[@williamcrawford7982]

If you order that finish tool make sure you get the shaft it mounts on for your drillpress!

[@jeffco9600]

Great video as always!

[@ocean374]

Amazing results thanks for sharing 👍👍

[@joelmcmahan7386]

Thanks again to BRO I thank you all for the videos you do. Good men who teach you how to be an outdoors man or woman. God bless and keep safe the men and families of BRO.

[@davidrdanner4232]

Good video BRO , Love the 12 gauge shot gun!👍 🇺🇸

[@loganking8394]

Great video. Keep it up BRO!

[@michaelrandall4956]

Thank you. Your videos answer all my God bless . Thanks for all the great content.

[@thereindeertherabbitthebat592]

Double round ball is a tricky load to get right. I'm open to any suggestions. Thank you for doing this video Wade, I'm all ears 👂. Fire away! 💥👍 (Dang, looks like you got it figured out! Very impressed, thanks again!)

[@jpresas3082]

Great video. Thanks for sharing. I'm just starting with shotguns, could you do a shotgun 101 from type of ammunition, types of shotguns etc....

[@glenndunn9672]

Love this video. Would like to see you take a deer with this load

[@BubbaRountreeOutdoors]

Me too! Gonna see if I can tag a big ole nanny this week!!

[@stanleymaestas5441]

Great video b.r.o. Wade rush!!! One load in particular that interests me is .440 buckshot in 12ga 2 3/4" & 3". This video was very helpful.

[@user-qp3eb4pm1zfatcatreloading]

Dang. That is awesome

[@markdiebel6354]

Great video, looks alittle safer than 2 69 balls lol

[@Charles-Windsor88]

Thanks Wade, excellent informative video I'm in New Zealand and at present 20 gauge components are scarce I will see if an importer can get me some Federal S1 wads I have some old no name 20 gauge wads but the have very short petals and are not very good with normal shot loads Keep up the good work and very best wishes to you and your family Pete

[@BubbaRountreeOutdoors]

Thanks buddy! It's my pleasure... Wade

[@ExceptionalPleb]

Great video!

[@escott3829]

Yeah I Get Horrible Preformance Outta 2 .562 Balls Unbuffered.. Like They Are Wedged Together. To Wedge Apart When Leaving Barrel. Hoping You Have Something I Can Use. But Honestly.. Ya Always Do.. Casting Lee 7/8ths Slugs, Svarog Italian Slugs And Svarog .66 Round Balls Today.

[@davidmccarterdm]

I have made some 60 cal. double ball with clbc wads in 2.75 fio. hull. The height is just right to roll crimp.

[@michaelhedgepeth5106]

Good Stuff right there 👍... 🇺🇸

[@l.a.3887]

Excellent

[@travisweldmaster7815]

-And immediately they left their nets and followed him- love the hat

[@BubbaRountreeOutdoors]

that's right!!

[@randybird9979]

hey Wade, I got some cheap or as to say the cheapest 12 ga 7 1/2 shot I could get 1 oz to 1 1/8 shot, dumped out the shot, put in a spacer then put in a 20 ga clay buster wad cut so to fit inside the spacer inside the 12 ga wad, then, inside the 20 ga wad, placed a .535 235 grain round ball, crimped with a 600 MEC JR then test fired thru a 18 and 1/2 inch cut down smooth bore, single barrel (with no bead sight on the barrel) at 30 feet, standing free handed no shooting rest, and low and behold, 4 shots in a 6 inch pattern, and they seem to hit very hard, a side note this is a in house gun only, only closer then the 30 feet test fired distance, and yest I wanted a ball that would fit the 12 ga bore but stuff cost to much and now is hard to get, so, this will work, thanks for the videos you put up

[@clarenceray6597]

Good job keep it up those videos

[@taylorbernard8497]

Love the show

[@WillyK51]

Havn't tried this one, A card between balls might cushion them from each other, But might deflet the last ball moving away as the exit. Been using Blue Dot for 1 1/2 Oz heavy mag loads since the 1980's. My 357 also

[@StillmanSpinningSteel]

Blu Dot sounds good

[@williamcrawford7982]

Muzzle loader short starter works well

[@michaelrandall4956]

Mr Wade Rush. I see where War Wolf puts a over shot card between the two projectiles. I saw this on Taofledermaus. Accuracy was good with smooth bore Great with rifled barrel. Any thoughts?

[@BubbaRountreeOutdoors]

Prolly to get the shot column height correct! I didn't need 1... I tried a few rounds with a card between the ball with poor results at the range.

[@colsoncustoms8994]

I’ve got some .540” round ball, wondering if a 3 ball load would work (3 is right at 1.5 oz). I’ve seen 3 buck loads before but don’t remember them being great. I think property supporting them so they don’t jam each other sideways when the charge goes off is key. Thinking 2 washers / donuts between them to keep everything mostly straight as it goes down the bore might be the ticket. I’ll have to figure something out, they fit pretty well in a 20 gauge wad so maybe I can use one inside a 12 gauge wad, almost seems better to find something that’ll go straight from .700” down to .550” to hold them instead of a bunch of extra pieces.

[@BubbaRountreeOutdoors]

In my next video on the multi-ball rounds, I will be showing some tri-ball in .53 cal that work great!

[@colsoncustoms8994]

@@BubbaRountreeOutdoors hell yeah!!!!! Thanks for the reply and I’m very interested to see what you’ve come up with, I’m sure it’ll be a winner!

[@mikedouglas9535]

Wade this is not on topic but when watching this video i noticed you had a new piece of equipment on your loading bench.when did you replace your old Mec sizer with the Mec Supersizer. Great video. I like shooting slugs and buckshot out of a Remington 1100. Have a great deer hunting season. Mike

[@BubbaRountreeOutdoors]

Yes you did Mike! A good bud of mine down in Ga sent that piece of equipment to me a few weeks ago. I'm still dialing it in and am loving it as well. That very old ring sizer of mine is in need of some TLC. I wish that I had a penny for every hull that I've sized thru that thing since 1978!!

[@mikedouglas3491]

If you would like anothet one of those sizers i will send you one with a 12ga sizing ring, you will have to use your tube and crimp expander. I have 2 of these sizers and use the other one to deprime shells that i take apart from 410 to 12ga. I load 12ga on a texan and have a supersizer for that and also one for a texan 410. Both are progressive presses. If you want it send me address for me to mail it. Mike

[@BubbaRountreeOutdoors]

@@mikedouglas3491 Sure Mike! Contact me thru my website: BubbaRountreeOutdoors.com

[@nikovlahou2553]

Wade, do you have any other powder data for these? I heard IMR blue is discontinued.

[@vernonanderson2326]

The mad scientist great video bodyguard

[@BubbaRountreeOutdoors]

That's too funny!! :)

[@freyhollywood8386]

What choke were you using Wade? As always good vid, may God keep you and yours safe..

[@BubbaRountreeOutdoors]

Kicks Buck-kicker in standard Full choke: .695 constriction

[@vernonmcnutt2622]

👍🏻

[@jeffw1246]

Now I wonder about putting buffer in first with 1/4 fiber, then 1 ball then buffer and 1/4 fiber, ball and buffer. Or, buffer, ball, 1/2 fiber wad, buffer, ball, buffer. I may be rolling that in my mind tonight.

[@Kinetic.44]

Its almost like using buffer as a sabot

[@dieselten01]

Wade is that a new gun? Or did you wrapt the stocks on your Stoeger?

[@johnbailey9682]

Ok maybe you can suggest the right size ? On a 60 cal what mold is that ? I’m not seeing it on Marty’s molds or maybe you are using a different mold . Where do I get one of them thanks for your help .

[@BubbaRountreeOutdoors]

hey John... here's 1 on Marty's site: www.martysarms.com/products/round-ball-molds-inch-sizes?variant=21275718615094

[@drgdfhfdhfd498]

Bubba if you cant get ahold of buffer, can you think of anything safe to use instead ?

[@drgdfhfdhfd498]

@donald Robertson Oh thanks alot sir.

[@MrDillaKilla]

@@drgdfhfdhfd498 what did he say?

[@gregday6473]

Wade can I use 3" Fiocchi mag. primed hulls with load?

[@BubbaRountreeOutdoors]

Yes you can Greg... Just drop 5% off of the powder charge.

[@AUCTIONCAT2011]

Why do you not use enough buffer to be tight under the overshot card?

[@larrysledgejr1423]

What's everyone opinion on 16ga on deer and what buckshot and rifled slugs are good?

[@BubbaRountreeOutdoors]

16 ga is excellent for deer... #1 buck was designed for 16 ga buckshot rounds!

[@lesleyboeder1798]

Growing up I used a 16g mossberg pump 28 inch full choke. It was deadly with slugs on deer Shot many out to 70 yards. They fly fast and true

[@prestonmonaghan499]

What shotgun do you like best?

[@vaughnprecision]

Totally off topic but I’m just starting to get in to shotgun reloading. Where do find all the load data for steel shot.?

[@BubbaRountreeOutdoors]

Best data that I have found is at the Ballistic Products website, they have downloadable manuals!! www.ballisticproducts.com/Download-Status-of-Steel-manual-19th-ed/productinfo/XMSTEEL/

[@DoubleG67]

Have you do posted a .50 cal in 20 ga video?

[@williamcrawford7982]

2 x .530 balls fit in aa20 wad.

[@BubbaRountreeOutdoors]

been working on it Gil... video should post soon!

[@texasgeorge1386]

Could I buy a box of this load . I only have a public river bed I can hunt. And I can only use shot to hunt no slugs or archery is allowed. I would be willing to pay quite a bit for a box of these. I have never loaded ammo before and don’t have the equipment to try it myself this year

[@texasgeorge1386]

I have been using Ithaca self defense rounds and they are not very consistent

[@goatzega3006]

Can you use a paper shot card?

[@larryalexander4833]

Wade what if split one of the fiber wads in half and used part in-between the balls to help with deforming .

[@BubbaRountreeOutdoors]

I tried that and it didn't work! This was the only configuration that worked consistently!

[@larryalexander4833]

@@BubbaRountreeOutdoors hay it was a thought . If you don't ask your the man on this type thing .

[@BubbaRountreeOutdoors]

@@larryalexander4833 i have tried everything i could think off with this round ball stuff!

[@Joe3pops]

Those .60 cal double ball rounds, Hog killer and booger repellant. Lol

[@BubbaRountreeOutdoors]

yessir!! 😂 Yall have a merry Christmas Joe!!

[@HobbiesHobo]

🙂

[@tonykirby9574]

Mr Wade, have ever loaded a lee 1 oz slug with 00 buck?

[@BubbaRountreeOutdoors]

I haven't tried it yet Tony but I think the boys over at War-Wolf ordinance have done it!

[@thetobaccoguy1751]

Do you have a suggested powder charge with Longshot? My Blue Dot is getting low

[@BubbaRountreeOutdoors]

yessir! 28 to 30 grains of LS in the double .60 load!

[@thetobaccoguy1751]

@@BubbaRountreeOutdoors Perfect! Thank you!

[@BubbaRountreeOutdoors]

@@thetobaccoguy1751 yessir!

[@thetobaccoguy1751]

Could I substitute a Fiocchi hull for the Cheddite?

[@BubbaRountreeOutdoors]

yes you can...

[@thetobaccoguy1751]

@@BubbaRountreeOutdoors Thanks Wade. You rock

[@BubbaRountreeOutdoors]

@@thetobaccoguy1751 LOL! My pleasure brother...

[@thetobaccoguy1751]

@@BubbaRountreeOutdoors I tried those out this afternoon! They shot great. WAY better than the Tri-Ball loads I was trying to load. And, they feed better in my autoloader. Mission accomplished!

[@ThatPNWGuy2024]

I may have bought 800hulls from Bill haha

[@ThatPNWGuy2024]

Double .69 ball in this video? Just leaving work I’ll watch when I get home

[@BubbaRountreeOutdoors]

.60 cal.

[@ThatPNWGuy2024]

@@BubbaRountreeOutdoors dang! I’m still working on the double .69 load.

[@larryalexander4833]

Wade I heard that palmetto state got remington ammunition part of Remington sell off after bankruptcy.

[@BubbaRountreeOutdoors]

I need to take a look at their site!! Thanks Larry...

[@larryalexander4833]

@@BubbaRountreeOutdoors yes. Not sure if that's correct but came from good source. Ruger bought Marlin from Remington.

[@BubbaRountreeOutdoors]

@@larryalexander4833 I knew that Rem was in trouble again! What is this, the 3rd time that Rem has gone into bankruptcy?? it's a shame...

[@larryalexander4833]

@@BubbaRountreeOutdoors I believe thier gone this time ??

[@johnbailey9682]

Are those lead balls ?

[@BubbaRountreeOutdoors]

Yes they are.

[@roymoss9178]

.30 grns of longshot work ..

[@kellyk3889]

You need a high speed (slow motion) camera. I would bet you that if you could see what was going on with your shot (how they leave the wad / how the wad flys) you would have a far better understanding of what/why things pattern like they do. The whole a picture is worth a 1,000 words, storyline. How long does the shot stay in the wad out of the barrel? Does the wad opening pull some of the pellets off target? Is the wad spinning? Do the smoother pellets make a difference? Would dimpled pellets work better (golf ball)? Does pellet stacking matter? What if the shell was made so that the wad was the size of the barrel? Would it fly straighter? Does the wad wobble as it goes down the barrel? Does it always come up flying perfectly straight or does it come out flying cockeyed sometimes?

[@BubbaRountreeOutdoors]

Yes it would!! we have discussed that many times around here. what a tool that would be!!

[@kellyk3889]

@@BubbaRountreeOutdoors Just looking on youtube (slowmotion shotgun video) it looks like you need to get to ~5,000-10,000 frames per second (high speed camera) to really see what you want to see. You can rent cameras. Seems like someone would have one and want to work with you guys.

[@lesleyboeder1798]

Why not add a third ball instead of the wad filler

[@BubbaRountreeOutdoors]

stay tuned! the tri-ball video will post soon!

[@lesleyboeder1798]

Can you fellows not use rifles slugs. We have a controlled deer hunt were shotguns are a must. Most guys shoot old fashioned slugs or sabot slugs in rifles barrels. I never see you guys use any slugs.

[@BubbaRountreeOutdoors]

In SC it is illegal to use rifled slugs on a deer drive. I'm sure that it's safety concerns! No shot size limit on buckshot other than: No shot smaller than #4 buck. Big shot is okay!! We can shoot slugs if not on a drive using dogs or other hunters! So slugs are legal to shoot on a still hunt.

[@rgboyte]

Acts 2:38 is the Bible plan of salvation. Ignore this scripture and you will be lost forever.

[@kerryburns8058]

Why do you try so hard to get people to buy from bp?

[@theastro-philosophersappre2786]

This 3 year old video just came across my KZbin , it answered questions I’ve been wondering about using long shot and blue dot. Thanks again Wade. dmcabee

[@BubbaRountreeOutdoors]

yessir!!