BUDGET Amazon Cheater Rig Chassis | MAILTIME!!!

[@Ginga_Ninja_RC]

The pinch on the chassis is normal. Several chassis out there do that. Glad to see you listened when I told you about the Squid’n’serts. I’m pretty sure you’ll love them. Especially when turning and side hilling. Can’t wait to see the follow up video. 3brothers are good too but these are VERY comparable and about half the cost when you add in the tuning parts you have to buy to make the 3brothers work and fit properly. Plus being custom made for whatever tire and wheel combo you have.

[@arkansasrcnewbie]

Man imma give you a shoutout for the realtime review! Thank you so much for that, the inserts have been used!! And holy ____!! They really are an _______! 😂 Thanks for the input and help man.

[@Ginga_Ninja_RC]

@@arkansasrcnewbie good to hear. I love them and they really are the best value in my opinion and I’ve tried a lot of them. They’ve helped get me on the podium more times than I can tell you.

[@dezfan]

The pinch in the front and rear adds rigidity.

[@arkansasrcnewbie]

Thanks for the info, I was wondering what that was all about. Makes sense 👍

[@daywalkerj]

Most chassis are wider at the skid and taper down. It is normal.

[@arkansasrcnewbie]

Thanks for the info man, I thought something was wrong lol

[@slothsquatch5023]

The RGT is no more!! The new chassis looks nice with all the kit installed on it. Very nice mail time as well. Have you tried or are you going to try the hair donuts as tire inserts?

[@arkansasrcnewbie]

😂😂 No Hair Donuts!@ 😂😂😂

[@slothsquatch5023]

@@arkansasrcnewbie lol, would be a nice shootout, hair donuts vs all the other inserts you have.

[@1aview]

Way i understand the pinched chassis. The arch adds rigidity compared to stright rails. I believe the aluminum sides & skid are to also add strength too. But i could been told wrong.

[@arkansasrcnewbie]

Man it sounds good to me lol. Thanks for the comment

[@1aview]

Just orderd a lcg & 2low today. Peicing together my next build. Shooting for 4.20#s or less. All my others are heavy and i dont have any 4s crawlers yet

[@saladboy1841]

Got a quick question on your crawler with that cliffhanger body.I'm running the same chassis and axles, could you tell me what driveshafts your running. Thanks in advance love your channel

[@arkansasrcnewbie]

Hey brother, I am using these driveshafts, also shaved the rear one down a bit good luck and here is an affiliate link amzn.to/47OOGNj

[@RadioactiveRC]

Another great build and tell all video from the Arkansas RC Newbie! Those anti-foams are NICE! 🤙🏼☢️

[@arkansasrcnewbie]

Yes they are!!! Thanks Radioactive ☢️

[@John.lakesrc]

Some flat rail chassis pinch in at the front and back.

[@arkansasrcnewbie]

Good to know, someone was saying for rigidity? That makes sense, thanks man 👍

[@rcarty419]

Very cool Whets the stealth x lay down mount brand? Is it artful dodgers as well. Pinch and spacing is def a thing. Man looks Awsome on new rails. Get some new links. And with that belly might wanna change shock angle in rear….idk Nice tires….try the ruptures you’ll love em. Not comp legal always though!!

[@arkansasrcnewbie]

😜 I know there not comp legal 😕 such a bummer! Lol Thanks for the support man. I had some links I have changed but it seems like it's too low now!! It's like 1-1/4 I gotta figure some stuff out lol.

[@BigO-fg1fn]

IERC laydown transmission mount.

[@BangForYourBuckRc]

Brother, you got some fantastic stuff going on. Those carbon frame rails look super nice. Should definitely help shed some weight in the process! With everything swapped out it really appears to flex really well! So much better and far from how this was in the beginning! Those jelly like tire inserts are freakin cool. I think I may get some of those as well! Brilliant stuff buddy! Take care and God bless my friend!💪🏼😃🙌🏼

[@arkansasrcnewbie]

Really got some good stuff man! Thanks as always, hey those squids are like half the price of others and all i cam say it DAMN!!! Go look at some, I did a team comp with them this past weekend.

[@pandacrawler6x6]

🤔Soooo no more a RGT 😢 HEHEHE😂! But I think the RGT showed and served as inspiration for many (myself included), to start with a cheap, almost unknown brand RC and learn tricks, changes and upgrades, evolve the RC and also our knowledge. In this regard, I think RGT and Your Project/Mission were a fantastic success! Congratulations Friend, keep up this fantastic work and share, you have been a source of inspiration and good ideas!

[@arkansasrcnewbie]

Well Panda, such an awesome comment man. I am trying and people like you and your channel make it easy! Thank you my friend

[@pandacrawler6x6]

You are Welcome my Friend!!! All the 🏆🥇🎉 is in your awesome work and dedication!!!

[@1BARBAS]

Got the some build ,having trouble on yhe links can you help?

[@arkansasrcnewbie]

Man I am sorry but I can't! I hate to say it but I think this chassis is a dud. It just fights against itself? You having the same issues???

[@1BARBAS]

@@arkansasrcnewbie at the moment im very happy whit the balance stay on both sides whit bat on havent taken to the rocks . Did you tunne it i have to tested i have seen some build whit this and they perform .what lcg chassis will be so many opnios i have a tgh gear box

[@nandoscustomdiecast368]

New to your channel what ever happened to this build thinking about this lcg chassis?

[@arkansasrcnewbie]

Man I loved the thing, I used it in a whole season and learned a lot. Have not been able to find a chassis like it for the price. The motor mounting area is a little small for a 540 can so you may have to modify a little bit with a grinder. I ended up selling it because i won a negative g chassis and needed the money to put into my new build. All in all such a cool chassis.

[@nandoscustomdiecast368]

@arkansasrcnewbie Right on man thanks for the response 👍

[@BigO-fg1fn]

Right on bro how is that IERC LDTM working for you?

[@arkansasrcnewbie]

There great man, I'm a huge fan of the different mounting options.

[@1BARBAS]

kansas did you finish this build?

[@arkansasrcnewbie]

You know in the newest video I mentioned it....I have not yet. You knownthe ride height really fights against the wheel base? It's like one or the other.... I'll try and get some new links and maybe I can donsomething with it, not too sire if it was a good purchase for crawling man.

[@1BARBAS]

@@arkansasrcnewbie im 324 bend links and clean base I can show you if want

[@NTX_RC]

I have this chassis and love it

[@arkansasrcnewbie]

Man I am having problems getting the lcg lower? It seems like it has to sit waaay up in order for it to have a descent wheelbase with sufficient skid plate clearance? It's like 1-1/4 if I try and drop it and of it's at about 2" or more it's super short wheelbase... any tips??

[@NTX_RC]

@@arkansasrcnewbie mine is at 12.8, used an Element builders kit as the base. I feel mine is too low, definitely drags the belly.

[@NelaRc]

Im excited for you

[@arkansasrcnewbie]

Thanks Nela, these new builds got me excited too!

[@NelaRc]

I got the same frame for mine but I didn't get the skid plate mine came with the funny z front links but hey was not planning on using them anyway.