I'm 70 years old and not really interested in bass thumping. But....I love this channel! You are always smiling Mr Parker and you are really into what you are doing! Thank you for bringing your knowledge to all of us and keep up the good work!
@ParkerTheBasshead2 жыл бұрын
Thank you Richard!! It means a lot
@BASSmunky2 жыл бұрын
This is the coolest thing I have seen today!
@PopePlatinumBeats2 жыл бұрын
i am like this with things i really am not interested in as well... i just like to learn... ya brain stays young when you keep feeding it
@dustygriffis9992 жыл бұрын
@@ParkerTheBasshead hey Parker what was the link to where you found your batteries or cells and your buss bars
@kevinAuman12 жыл бұрын
@@ParkerTheBasshead hey Parker, so I remember you thinking that DC woofer ya got was a bit overpriced when you consider the performance you get for the money lol-ol-ol well I just got a DC NEO ELITE 4-18in D1ohm delivered yesterday and man o man is she sexy!!! Apparently it is the biggest and baddest sub that DC makes and it certainly is wayyyy overpriced the damn thing cost $2,500+ for ONE WOOFER!!! Thankfully I actually won it from a DroppinHz waffle because I don't care if they plated it in 24k gold or pure platinum there is no way in hell I personally would ever spend that much on a single woofer I mean sure it's badass, weighs 80lbs of neodymium with 4in 8 layer PE flat wound coils rated 4.5k rms but man that's a whole lot of money when you consider I bought pair of Wolfram PT-18's that also have a 4in PE coil and 4k rms each for $650ea lmao I could buy 4 of them for the price of this one subwoofer and I'd bet you anything that the 4 Wolfram PT-18'S would be significantly louder than one NEO 18 ever could! But hey I'll take it for free 😝🤣🤷♂️ granted I'm likely stuck with it for life because I can't really see anyone spending what it's worth to buy it from me on top of the orig price it also has a custom colored basket and matching dust cap so I'm guessing it was somewhere close to 3 grand!!!
@josephmuniz99592 жыл бұрын
Dude, Dude. You have a passion that just rocks man. I love your builds. The best part of all of this is watching where you came from and where you’re at now. Keep building and bassing
@technicianumber12882 жыл бұрын
I've never seen a battery set up like that, definitely looks badass. Gettin so close my guy
@Jflippi102 жыл бұрын
Just binge watched part 1-7. Love this channel. Keep up the good work Parker!
@ParkerTheBasshead2 жыл бұрын
I appreciate it man!! Next part will be out in the morning
@clarencepattonjr10172 жыл бұрын
@@ParkerTheBasshead how can someone contact you
@PatricksDIY7 ай бұрын
When you connect a pack out of cells like that you need to have a BMS, to ensure proper charging and discharging, because if those cells become unbalanced, either over or under charged, it will cause a HUGE problem. I'm not a Car audio expert, But I do deal with Lithium Cells a lot, including Lifepo4, the type you are using. They wont explode like Lithium ION, but they will release unsafe gasses and get VERY HOT.
@kyleknox17772 ай бұрын
Actually for car audio a BMS limits the current of discharge and charge. For solar, trolley motors, and other things alike a BMS is recommended. For car audio the only thing needed is a Balancer. The regulator on the alternator keeps the charging within range.
@michaeldavis84112 жыл бұрын
I wish I had the opportunity to do like you do and share it with the world !! the main reason I always watch your vids is because you are genuinely excited and 100 percent honest about your love for bass .... keep it up my brother in bass 💯 keeping frequencies low and vibes high 🙌😃
@minenachos2 жыл бұрын
Michael you do have the opportunity. We all do the best part about it you can get started with a little to no money and minimal efforts. We can do anything we put our mind to.
@Trevor_Hall2 жыл бұрын
I've learned everything i know from you, parker! I truly appreciate it!
@jacoblittle32092 жыл бұрын
I just got that JP234 and I love it. The only downside of it is that the clip light is on the opposite side of the amp than the adjustment knobs. I ended up just using my DD-1 but if I didn't have that I would have been stuck using a mirror when making the gain adjustments
@minenachos2 жыл бұрын
I've read all kinds of stuff on those single lithium cells how hard is that on your alternator and did you have to do anything to the regulator on it to keep from overcharging the lithium pack? If memory serves me correct those are 3.2 volt cells? as opposed to the lithium ion that are 3.7 volt cells. The reason I bring up the regulator and overcharging I used to build packs out of 18650 cells and if you put more than 4.2 volts into each one of those cells they will get hot and explode and when I say explode it's more like hooking a capacitor up backwards the case blowing off of it and it's going to dent something or put your eye out.
@erikmcgraw83862 жыл бұрын
It’s all coming together, nicely done Parker. Keep up the great work, love your videos
@seanjulian80132 жыл бұрын
Awesome video! Been looking to go lithium for a while now but those prebuilt lithium batteries cost an arm and a leg. This has opened my eyes to much cheaper options. Thank you for this great content!!! 👍👍👍
@dyllancash76202 жыл бұрын
Do the 2 taramps 8ks on subs and the big jp on the mids and the smaller jp on the Highs with the taramps smart sp to tune them all
@nicholasm22542 жыл бұрын
You may want to spread out your power and ground wires to distribute the load across more cells. The way this is set up the cells closest to the power wires will see dramatically more stress than the cells farthest away.
@headhoncho48902 жыл бұрын
Hey Parker how can i wire two 64ah headway batteries in parallel
@donaldwilcoxjr.52122 жыл бұрын
Thinking of trading out my memphis mini mojo 8 in the factory enclosure I put in the extended cab of my truck for a custom built box and one of those American bass 15s ....just wonder if it will preform as well ....the mini mojo 8 surprises everyone when I turn it up ....but I am running around 1100 watts to it sometime a tad more ....using a skar rp 1500.1 to run it but I may use a jp23 to run the 15 if I go that way ....just always like to build my own enclosure....first time in 20 years I didn't
@kswis2 жыл бұрын
I've also got a bunch of headways. The active balancers I've tried sucks. Bought an icharger x6 n just balance now and then to keep em healthy. Also, they get damage when used under 32 deg unlike other lithium chemistries. Just another toy to keep my cheap ass batteries healthy lol stoked for the next one Parker
@FUBuddy2 жыл бұрын
pretty happy with my jp234, and 33, but the bass knob is kind of sucking compared to the standard wired with clip light.
@bakerbldg2 жыл бұрын
Nice battery bank I can’t wait to see this setup in action.
@ParkerTheBasshead2 жыл бұрын
Thanks man!!
@NuhUhNotTrue2 жыл бұрын
You got that big bank energy! Man, I wish I knew what I was doing when I first installed my set up lol, I just need to get a newer head unit to properly run all my speakers into the 4 + 1 channel amp I'm running.
@brentpadgett71782 жыл бұрын
Parker, I want to build a lithium bank for my 1200 watts system I was wondering what you would run? Kicker Comp R 12’s and matching Comp R Amp..
@Hicompression12 жыл бұрын
What prevents you from dropping a wire, tool, etc. on top of that Lithium bank (creating a short) leading to a massive fire? You going to run a lid/cover over the top of that thing?
@91CavGT52 жыл бұрын
Also, those ground wires are laying on top of the next battery rail. If those things end up wearing through from the bass and/or from vibrations, that will be a direct short and will catch fire!
@anthonypacheco76062 жыл бұрын
I have give a Shoot out to Parker the bass head. Great videos keep up the good work ... I've been into car audio all of my life
@jeremystover2562 жыл бұрын
Sick! I have 192ah of lithium and have been thinking of going Coventry but $500+ is steep for me especially this close to Christmas!! Link to bms you got?
@tinfoilgrillss2 жыл бұрын
My CRV needs that sub! I hate stock audio and I just cant afford a sub right now with a baby on the way. LOVE this budget series though, great for bass heads who dont have thousands to spend on audio. I will just copy this build but cut everything in 1/4 lol
@thelifeofriley8152 жыл бұрын
I wanted to build a headway battery for my car, but the high output alternator I bought charges a little too high. 15v cold and 14.8v warm is a little more than I wanted to run since one of my batteries are bad and probably pulls it down more than a lithium bank would. AGM will work just fine for me though and should last until my next car, then we can go lithium! 340a alt on an xs d2400 (coming soon) and d1200 for a 5k and 600. I think it’ll handle it.
@cuh_20232 жыл бұрын
What Balancer did you use for this bank?
@codyharrelson892 жыл бұрын
Where did you buy the cells and balancer from?
@ParkerTheBasshead2 жыл бұрын
Got the cells from battery hookup and balancer from Heltec on Amazon.
@jimmyjackson6392 жыл бұрын
That cell bank you are building do you have to worry about temperature with those just curious
@Factsndioukweli Жыл бұрын
Hey Parker. When & where is the next subwoofer flex festival in USA?
@headhoncho48902 жыл бұрын
I have one 64ah bank with proje r sb busbars now i have my second set of bars and waiting on my cells to build the second bank Headway ftw
@basshead1002 жыл бұрын
HI Parker.why you are not using LTO cells?what this cella stand for?any data sheet available as of peak power for deep bass.
@soloxslick2 жыл бұрын
Just let me get that 3k on the wall and enough to buy 2 sdr 18s....got plans to put it in a 06 Acura TL with the 2 6" ports thru the back dash.
@spuds76772 жыл бұрын
Where do you get your Headway cells from? I'm thinking on building like a 40AH bank here soon.
@anthonypacheco76062 жыл бұрын
Good job . I hope you hit at least 160+ db.. I wonder if you still will get any type of voltage drop ??
@joeyslam6052 жыл бұрын
Rock on Parker this series is gettin good
@bass321head2 жыл бұрын
Parker what was the total cost of this build..and dis Coventry supply all the hardware.. And did you get all the cells from battery depo. I am looking to build basically the same battery as this..thanks
@moabs10blowthru412 жыл бұрын
What are the measurements of those bus bars? Trying to figure out which ones I need for my 384 cell bank,764 ah
@kendrickcontent2 жыл бұрын
SWEET!!! Im building a 128ah which balancer would I need and how to wire it
@nathanslosson91092 жыл бұрын
Nice video! loved the spark but definitely need to protect/cover those plates man that makes me nervous. only takes 4 of those headway cells to start a car! those are no joke. BE CAREFUL BRO
@tonyb9785 Жыл бұрын
I've been doing some research on these banks. I'm curious to hear, how are you charging these batteries? I keep hearing they have a similar charge profile to lead acid, but then others say they are not safe to charge off the car alternator and if they're connected to the starter battery and there's a big voltage difference, there's some bad about that? Have you run into any issues or had any concerns? Seems like you've had good experiences? Have you experimented with a BMS at all or is that not viable for this application? I've ordered 36 cells to experiment with.
@snoopy30602 жыл бұрын
Not gonna lie Parker when you seen the ruler spark give me a little bit of a laugh Good job on your system brother
@melbahouse57432 жыл бұрын
please tell me you plan to insulate or cover up those bus bars .
@lose19732 жыл бұрын
Got the cells ....need the bus bars and Allen screws ....I'll did the 64ah ....know I'll step up to 128ah......point me right man
@MrDopey322 жыл бұрын
Looking great Parker! This is gonna be a rocking setup, great job!!
@MannyGunzz Жыл бұрын
I'm still catching up on your videos, I'm a bass head also and a big fan... Keep bumping 😎
@ZweigeProd2 жыл бұрын
I live for learning about bass and how you do it. I love the videos and love me some bass. Looking good so far🔥🔥
@mikegreen22292 жыл бұрын
Where can I find good info on building these cap banks? I’d like to do a much smaller one
@thomasjones35312 жыл бұрын
Parker been pimpin since pimpin was pimpin.....pimpin
@arsynoeford96382 жыл бұрын
Need that sub in my 2018 malibu
@davidfagan32562 жыл бұрын
Parker hey sir I heard you say once that you need to get rid of things there and I was wondering if you had any head units because I wanted to trade you a brand new VFL 4800 AMP SERIOUSLY NEVER BEEN TAKIN OUT OF BOX I GOT IT FREE AND DON'T NEED IT AND I WENT TO AMERICAN BASS TO LOOK IT UP IT HAS A VERY VERY NICE BASE NOB BUT LOOKING FOR A GOOD HEAD UNIT!!!! GREAT VID'S GREAT BUILDS KEEP THEM COMING THANK'S FOR YOUR TIME SIR !!!
@dead6last2 жыл бұрын
nice bars. i got 96 ah headway bars from coventry about a month ago, high quality
@ParkerTheBasshead2 жыл бұрын
Yes they are excellent!
@anthonyviau12 жыл бұрын
When you ran that tape measure from the + to the - terminal I puckered up a little bit😂 careful with that bad boy, if my math is right that sucker is capable of 4,000 amps continuous discharge. ⚡️🤯⚡️
@karlhessen39042 жыл бұрын
I second this I work with lithium batteries daily and you gotta be careful when doing that. Usually when we arc a cell we consider it scrap.
@Petethebuilder10 ай бұрын
Hey Parker do you have any of the 12v battery busbars that look like a battery you were building?
@rooseveltwilliamssr.4091 Жыл бұрын
SO 80CELLS MAKES A 160AH LITHIUM BANK SO MY QUESTION IS HOW MANY WATTS IS IT PUSHING?
@arthurpogue8786 Жыл бұрын
I have 4 battery packs for my bicycle. Can I use them for my stereo?😊
@Bradburn9112 жыл бұрын
build will be insane 👀
@exploranator Жыл бұрын
Wouldn't aluminum or copper hardware (bolts etc. to each cell) reduce overall resistance?
@four3181 Жыл бұрын
How many AH is that bank? and where can i get the cells and bussbars??
@D0nk99910 ай бұрын
Can something like this be ran with an agm xspower under the hood without anything getting damaged. A 96ah on an 8k with a 320 amp alt
@HooligansMx2 жыл бұрын
I'm banned on Facebook for another 6 days lol so gotta wait to like your Facebook page Loving the videos bro good inspiration for my build and I'm learning all the stuff I didn't know!!
@PhiMobileSounds2 жыл бұрын
9:28 😂 Never not surprised! … Respect the power of the spark ⚡️ 😂😂😂😂
@jcooksey192 жыл бұрын
Coming together good can’t wait until the test
@FinsleysCustomCarAudio Жыл бұрын
Literally just bought the same 160 bars from Coventry. You still using the bank? How’s it? How many watts you getting out of it. How much voltage drop? I got it to run my md12k 1ohm model wired at 1.3 Have a 370 and a 270 alts with 4 runs 2/0 welding cable to rear
@4biglac21 Жыл бұрын
Are those silver, steel or aluminum?
@bsbdbdnd50132 жыл бұрын
Hey.. so on my radio I have SPEAKER LEVEL.. I can change the DBs should I keep the Subwoofer at 0 or could I put it too 2 if I set the gain right? What do you recommend??
@baileyflanagan30812 жыл бұрын
So I’m sorta kinda new to car audio.. what made you go head way vs lithium?
@Tmanstomp1002 жыл бұрын
Hey parker after you finish testing this I have a BURNING question bro.... What does a 12 inch subwoofer sound like in a box with a 12 inch port....? I feel like noo one ever does big ass ports, and I understand why they kill the midbass, but still, I feel like you could get some super high spl scores
@Hammerback0 Жыл бұрын
Depending on cu ft, it will sound like its in free air if the box is very big
@silversurfer3023 Жыл бұрын
So every 8 cells equals 8ah multiplied by how many sets are going in the same polarity ?
@xxg0t3mxx2 жыл бұрын
so close to that 80k! never clicked so fast in my life.
@ParkerTheBasshead2 жыл бұрын
Thank you bro!! Yessir almost there
@dustygriffis9992 жыл бұрын
@@ParkerTheBasshead what’s the site for the cells bro can’t see it in any of links
@matthewcoulter39912 жыл бұрын
Hey guys I have a 2013 4runner and I want to build a 96ah headway bank and it will run the entire car (battery delete). Will running my car at 14.5v hurt it at all? I honestly don’t care if the dash lights up lol if everything still works ok I’m fine with that
@chefleon29672 жыл бұрын
It’s coming together very beautifully love the content
@ParkerTheBasshead2 жыл бұрын
Thank you!!
@chefleon29672 жыл бұрын
@@ParkerTheBasshead if you don’t mind I need to ask how much did all of that bank run you?
@ISTEWART6262 жыл бұрын
Hell yeah Brotha the build is coming out good! Can’t wait to hear it 🔥👍🏾
@Kenmarshallintereststx Жыл бұрын
What size and kind of BMS did you use? I will read through the comments after this to see if I can find it as I'm about to make a order on battery hookup
@eddierawling66462 жыл бұрын
Looks awsome brother can’t wait to hear some serious bass from those baby’s
@choochootransportservices22482 жыл бұрын
Hey parker got you subscribed on both my accounts love the videos I got a question I didn't see nobody ask did you ever think about building in selling these batteries for people or can people request for you to make one for them?
@SlamryCamry19 Жыл бұрын
Are these the headway cells like in the super beast im thinking about ordering one and getting some bus bars for my setup ive been told if i get a supercap battery or bank and add with the headway it will complement each other and slow any voltage drain down in between bass drops do you know if there is any truth to that im new to lithium in car audio been gone for over 10 years and now everyone has massive lithium banks
@mobettaspice2 жыл бұрын
How much did it end up weighing? In Pounds plz.
@vpowerelectrix9982 жыл бұрын
Great vid bro... Is a BMS necessary?
@carlosgonzales14192 жыл бұрын
Can't wait to see it finished
@ParkerTheBasshead2 жыл бұрын
Me either man! We are getting close
@hooptastic_hippie85222 жыл бұрын
i need that 4 channel bad...mine just went out lol
@edgartorres2852 жыл бұрын
Thanks for the video. I'm thinking of building a nice lithium bank like that one.
@drewanderson8279 Жыл бұрын
I'm a little confused as to how the cells are not feeding sideways creating more than the 12volts that the 4 end to end would produce.
@scottcol23 Жыл бұрын
Because they are linked in parallel. The difference between Series and parallel is when you hook up two or more batteries in series, the voltage doubles, but keeps the Ah (amp hour) or cycle capacity the same. Parallel connection is when hooking up two or more batteries to keep the same voltage, but to increase the amperage or cycle capacity. He essentially made 4 giant batteries that are made up of parallel cells that are then joined together in parallel. Making a 12v cell that has an enormous Ah capacity.
@drewanderson8279 Жыл бұрын
@scottcol23 thank you very much. I get it. You broke it down enough I can understand it now.!
@floridaboys13 Жыл бұрын
Once again Parker.. where are you buying your cells.. also any discounts
@chaseellis98662 жыл бұрын
where do you get the cells from?
@kevinberrios92747 ай бұрын
Question: My alternator is 320amp and it can go from 14.8v-16V( I can regulate the voltage with a knob ) Is it safe to run it at 14.8v or at 15.5?
@91CavGT52 жыл бұрын
Love the build man, but PLEASE insulate those wires and don’t leave them sitting across the battery rails like that. It would not take much for the wire insulation to wear through and then you have a direct short which will catch fire!!! Lithium is amazing, but you have to respect the power and build it safely. I recently built a battery using 76 eight amp/hr pouch cells that are capable of up to 400 amps each! I took my watch and wedding ring off while I was building it. A 1/0 wire can flow a LOT of current before it melts!!! PLEASE be careful. I want to see how this turns out, and future projects too.
@shunnsmith20272 жыл бұрын
I ordered 30 of those cells I’m trying to build a 120 ah bank how many more do I need
@jeremystover2562 жыл бұрын
Another 30
@InLoveWithBass199010 ай бұрын
Hey Parker, was this on a stock alternator?
@jimmyjam55882 жыл бұрын
That bank is massive I I wish I had the room and money for that!!!
@loko77112 жыл бұрын
Man! Looking like you might blow out one of the windows with this build Parker 👀 😁,!
@nickloesch37922 жыл бұрын
Where did u get the batteries
@marcuselee14632 жыл бұрын
What was the cost for the bank completed?
@HillbillyRefrigeration2 жыл бұрын
I have two of those jp234’s in my Build one on mids one on hi’s and They healthy!!!!
@djkritical96062 жыл бұрын
Did he say where he bought the headway cells from?
@shanyonthetwin30 Жыл бұрын
How do you charger single cell headway.
@thebassgeneratorinc229 Жыл бұрын
Did you share a link to those buse bars?
@Ninjasraynonu32 жыл бұрын
I was building my 96ah and scared the shit out of myself when I had it arc on me touching the positive and negative lol