This is the first time I've had the 72 ah of headways in my whip for more than a 10 min torture test. Dude, Parker get some ultracaps to go between your amps and headways... brah I've been doing this a min n I'm telling you, ultracaps AND lithium is whas up man... research it if you want but an xs power SB 630 farad in my little 7-9k system has my voltage more rock solid than I thought poss! for approx $800 for lithium and ultrcap... im surging almost 800 amps and steady 13.8-14.3 the ENTIRE time... Level up brotha! Thanks for turning me onto the headways! So glad I took the plunge!
@davidoutler2854 Жыл бұрын
I have been following your videos for a few months now, I’ve started putting together a setup of my own. I just have to say I appreciate you putting in the time and sharing what you’ve done it’s been so much help.
@MickeyMishra4 жыл бұрын
All of us that have been doing lithium cells since they came out are enjoying the builds.
@rustywrench5004 жыл бұрын
I've been doing this exact same thing for the longest time, im glax you made a video about it to inform all these people, and save them money and get a bang for their buck good work man.
@lesteranderson33502 жыл бұрын
Do you still recommend buying that same set up or has something. Wtter come out??
@rustywrench5002 жыл бұрын
@@lesteranderson3350 depends what do you need it for, what's the application.
@lesteranderson33502 жыл бұрын
I have a high amp alt with big deep cycle for 2nd battery. Running skar 4500.1. My deep cycle does pretty good but lithium would take me to next level..
@rustywrench5002 жыл бұрын
@@lesteranderson3350 have you looked into yin long? They make amazing lithium batteries, I would say that the option in the video is a really good one but if you're not familiar with batteries on an advanced level then there are some major risk factors, but if you know what you're doing then this is a very good solution and very cost effective as well.
@catch22frubert4 жыл бұрын
This was an awesome surprise! Great to see you tackle a DIY lithium battery. I have been wanting to do a lithium battery myself for a couple of years now, and i've done tons and tons of research. The absolute best cells to use are A123 Systems 26650 cells. They are little 2.5 ah cells, but you can get a box of 100 cells for about $500 if you are lucky. These cells are capable of 50 amps continuous discharge each! to put it simply, 100 cells make a 62.5 ah battery that is capable of 1250 amps continuous discharge @ 12+ volts. It would support 15,000 watts continuous easily and 36,000 watts burst for 30 seconds.
@ParkerTheBasshead4 жыл бұрын
That’s awesome man!
@catch22frubert4 жыл бұрын
@@ParkerTheBasshead If I'm lucky enough to get my hands on a full box of the A123 systems batteries while NY is on lockdown, I will be sure to post a video of it running my Orion XTR-2500.1dz so you can see how well it hold voltage. To be honest, I have the knowledge, and the free time these days. I'd love to start a lithium battery company. I would have to call it "Electron Bomb"!
@jkbrows10953 жыл бұрын
@catch22frubert 50 amps from a 2.5ah cell is 20c but the headway’s are actually capable of 25c so his 64ah bank could discharge 1620 amps with large enough busbars and equipment to handle it. There are multiple brands of LTO cells and LiFePo4 that can discharge 50c to 100c as well. If you are mainly looking for a lithium cell with a high C rate there are a few better options out there, and I realize I’m 10 months behind, so you might have already learned this on your own. I was just trying to help out cause I spent a bit of money buying the same exact cells then started finding so many cells with higher output and I was pretty upset.
@wesjacobson66754 жыл бұрын
Good info in my opinion. I’ve been looking into this part of the game the most right now... trying to figure out the best electrical possible.... and also how to make it as affordable as possible. Thanks so much for the videos man!
@ParkerTheBasshead4 жыл бұрын
You are welcome!
@benluster80583 жыл бұрын
Great video. Seen a lot of lithium on car audio videos never understand how they worked. Thanks for the breakdown.
@ParkerTheBasshead3 жыл бұрын
Good to hear man!!
@SmalltimR4 жыл бұрын
Awesome job! Lower cost alternatives = more money for upgrades - thanks for this
@BARBELLS-AND-BUDS4 жыл бұрын
I'm going to want to build one of these. I wish the voltage rested over 13v, but still better than my AGM resting voltage. Can't wait for the next video. I'm also interested to see what you're going to use for a charger.
@alaskadroneshots10574 жыл бұрын
bassmansoundking99 I have a a 96amp hour pack that I built. I just run a 1/0 straight from my 240 amp alt to the battery. Fully charged it sits around 14.-14.6. I have had this battery for a year now and have no issues.
@jahlieel.e78564 жыл бұрын
@@alaskadroneshots1057 do you have a video on it. Which brand did u use. Thanks
@alaskadroneshots10574 жыл бұрын
Jahliee L.E no I don’t have a video. I just used the headway 38120s in a 4s 12p configuration
@jahlieel.e78564 жыл бұрын
@@alaskadroneshots1057 thanks
@jeremycrabtree76834 жыл бұрын
Mine charge at 14.4 with stock alt & rests at 13.3. My system would have my xs power d3400 into the low 12's at full tilt after a song. Ive tried getting my bank to drop into the high 12's but its a no go. Makes such a huge diff with only 40ah/20 cells :)
@sammydraughn59954 жыл бұрын
I definitely have to switch from AGM to lithium batteries all that under $400. Keep up the good work good to see North Carolina in on the sound scene
@mikehoncho53602 жыл бұрын
Hell yeah me too
@workingclassperson21244 жыл бұрын
Commercial-Grade Bass!! Freakin love it! You never cease to amaze and impress me, you show doing it right doesn’t have to be hard or expensive. You along with EXO!, Soundman and Car audio fab keep it rockn on KZbin and Big D Wizz to finish off the audio entertainment ROCK. There are others of course but you guys do it mostly solo like I do when I do my builds. Looks like your never going to stop! Oh ya!!
@floridaboys134 жыл бұрын
You forgot Steve meade design
@Tabascorider2 жыл бұрын
@@floridaboys13 exactly, definitely deserves a mention ,Steve is badass
@thenotoriousrvh60914 жыл бұрын
Thought I was subbed missed this one. Straight legit ! Like some others have said a little thicker buss bars would be better but very nicely done. Now build me one 😂.
@HifiVega4 жыл бұрын
The battery turned out awesome man! I’ve been considering using a bank of 8 headway myself.
@ParkerTheBasshead4 жыл бұрын
I appreciate you man! Crazy much power these things can handle for being so small
@tusabea3 жыл бұрын
Parker Dacchille are you still Building and selling these battery?
@mazda22844 жыл бұрын
i have full videos on my channel , they also make 38120 cells that are blue and you dont want those , ones we use are 38120 HP ''high power" and are red , these will smoke that 45ah limitless in performance lol ! yinlongs dont need over 15v they can be run as low as 14.4v , what i recommend is 14.6v+ charge go yinlong , anything under 14.6v charge i do headways , yinlongs do best at in the 15.2-15.6v range , anything over 15.6v dont add anything , but even at 14.6v the yinlongs will do better than the headways due to being a 13.8v battery . yinlongs can not be mixed with AGM like these though .
@katiluschris4 жыл бұрын
Just purchased 28 headway lithium,super excited & the links u left will help out alot. Thanks
@xtrmbrazen61534 жыл бұрын
That's awesome! Seeing you build this for that price, I definitely want to build one now and it would be perfect for my 4,000 watt system. Please can you add links in the bio for everything I need to build it. Can't wait to build one. Thanks Parker!
@ParkerTheBasshead4 жыл бұрын
Yeah man I’ll try to add links this evening
@xtrmbrazen61534 жыл бұрын
@@ParkerTheBasshead cool man ty!
@dwaynetaylor18733 жыл бұрын
@@ParkerTheBasshead I was wondering if you started making these and selling them to people? If so how much are you charging?
@Infanitunit14 жыл бұрын
Thank you I’ve been look for a video that would help me began this project
@kimoarmstrong35194 жыл бұрын
Your best video yet.
@ParkerTheBasshead4 жыл бұрын
Really?? Thanks man!!
@SamuelHollandsh2 жыл бұрын
I made the mistake of going with the yinlong, and now I see this was the way to go. Thank you
@dr.dylan123 Жыл бұрын
What's wrong with Yinlong? If your alternator charges high you should be fine right?
@skipjohnson74719 ай бұрын
Youve inspired me to build my own 24ah headway battery..less than 200$total..buyin a premade battery is is around 500plus..watch him and learn fellas
@miiiikee_4 жыл бұрын
That’s a sweet DIY. Looking forward to the testing.
@ParkerTheBasshead4 жыл бұрын
Thanks man!
@Simpleman10784 жыл бұрын
@@ParkerTheBasshead good job you doing great.... Hey do me a favor can you underneath here post a link to that thing you use for the terminals put on the ends of the 0 gauge. I know it's a lot cheaper than getting that hydraulic one. The one you use a hammer with... Thank you Parker 👍👍
@That_Car_Kidd4 жыл бұрын
Simple Man I have the same shca terminals Parker used and all I did was use a hefty chisel and smack it with a big hammer. Kinda ghetto but gets the job done cheap and easy, after you put heat shrink on nobody can tell the difference. 🤷🏻♂️
@gioarteaga39844 жыл бұрын
We are all waiting for the built bro stay safe see you on the next ...
@ParkerTheBasshead4 жыл бұрын
Thanks you too man!
@BudgetBassHead4 жыл бұрын
I was just searching lithium batteries today. Good idea, bro! Thanks
@ParkerTheBasshead4 жыл бұрын
Yeah man!!
@1ohmwrecker4 жыл бұрын
Dude, this is dope! I'm impressed. I just spend $375 on a xs power 3400 agm battery and some side post terminal adapters! And I coulda had this lol!? Plus I bought this to make my skar rp2000 happy, but I bought it about 40 days ago, and I've had to send it back twice cuz they went into permanent protect. Fist one lasted 7 day at 4 ohm, and second one lasted 9 days at 1 ohm. (Initially had to break my American bass elite in at first so had to run at 4 ohm.) So it's been super unreliable and it really sucks. And I got a decent bit of money into this so I'm just a lil upset. But dude that is super dope and look so easy and actually pretty fun! Crazy watching you get smarter and smarter. And hearing your name more and more in bass head community. "That parker kid" they always say lol. Congrats on your success man!
@ParkerTheBasshead4 жыл бұрын
Thanks man!!
@catch22frubert4 жыл бұрын
I own a Skar RP-2k as well, but mine has been solid for 3 years! Sorry to hear yours went bad twice! You should think about getting rid of the Skar, and getting a Soundqubed S1-2250. Much better amp with a clip light on the bass knob for similar money, about $250. Wolfram also makes a 2500 watt $250 amp with a clip light, the C-2400 I believe. I might even be willing to sell you my Orion XTR- 2500.1dz if you are interested.
@1ohmwrecker4 жыл бұрын
@@catch22frubert if you see my videos, I've got okay stuff and tryna do it properly but can't get my amp to be solid for the life of me. I wanted to like skar so much! But I was actually checking out that wolfram 2400. It looks pretty solid. And yeah, the clip light too is dope. I just got money wrapped into this skar, plus a $22 warranty plan from eBay Idk if it'll be refunded too? Just got wrapped up when I only wanted that 140 db daily bumper lol.
@joeb97934 жыл бұрын
Sucks that you are having issues with your Skar amp. I have an RP-1500.1 in my truck and an RP-2000.1 in my car and both of them have been going strong for almost 3 years now.
@1ohmwrecker4 жыл бұрын
@@joeb9793 so I'm just that unlucky mf as usual lol. I've seen some people say theirs have been solid, I seen some say they had protect problems also and had to swap out 4 or 5 times before skar just gave them a refund. Jordan up at skar has been really good to me tho. So I just gotta trust he fixes the issue!
@joshua1996284 жыл бұрын
How am I supposed to charge lithiums? First time getting on with lithium 🔋
@hitek8354 жыл бұрын
Tessa tape would be perfect for this build! Nice work.
@afc-sw5qn4 жыл бұрын
Suns out guns out. Great video keep it up bud!
@ParkerTheBasshead4 жыл бұрын
Thank you!!
@paren82394 жыл бұрын
This is awesome, can’t wait to see what’s next!
@bigsergonbaby59594 жыл бұрын
Pretty soon your gonna build a wall. Great vid. Keep it up.
@ParkerTheBasshead4 жыл бұрын
Haha hopefully!
@DjR3aper4 жыл бұрын
12:20 whats the difference between a 65 Ah AGM and this? Why can it support so many watts?
@ParkerTheBasshead4 жыл бұрын
Lithium is WAY more efficient! there are some video of KZbin of people doing direct comparisons
@MadDragon754 жыл бұрын
😀👍 I just had a tear of joy. Yeah bro, now that's awesome! I bet it will perform better now. Very impressive bro. Keep up the good work.
@ParkerTheBasshead4 жыл бұрын
Thank you!
@MadDragon754 жыл бұрын
@@ParkerTheBasshead nah man.. Thank you!
@BallisticSuperiority4 жыл бұрын
The balancer source you linked to had about 8 different options. Not sure which one to get.
@angstyxxo12323 жыл бұрын
Same here
@RawbasicInc Жыл бұрын
Are you using this in conjunction to a standard battery
@yougod72533 жыл бұрын
Taping the balancer to the busbar can cause a short. Insulate it .
@simplisticbanging32434 жыл бұрын
Man I am about to buy batteries to make me one. This dang Covid19 right now. Screwed me up on ordering my batteries!! I'm soooo close to being ready for the build... All I need is the battery. I have a XS3000 but I don't want to buy another. I want to go lithium but like you price point big factor, limitless....well my damn pocket isn't limitless lol lol....oh and I too want it to be able to play nice with my agm under the hood. Plus my XS3000 I think weighs close to 80 freaking pounds!! I absolutely need to go lithium. Loved the vid!!
@ParkerTheBasshead4 жыл бұрын
It’s worth it man!!
@Soulgasm084 жыл бұрын
Great video. Very clean work.
@ParkerTheBasshead4 жыл бұрын
Thank you!
@speedboatcig9468 ай бұрын
Hi Parker. I got the exact same set up but I'm getting 14v. Not sure what I did wrong. My balancer did not like it!
@stewartpidazzo30034 жыл бұрын
I wondered if locktite disturbs the flow of electricity?
@gregcarranza65474 жыл бұрын
That's a good question, I was going to buy locktite but you have a valid question I'm sticking to lock washers.
@Fox_Stang_4204 жыл бұрын
Great job!!! I need one of these. Just dk if I trust myself to build one and not burn my truck to the ground lol.
@ParkerTheBasshead4 жыл бұрын
Hahahahaha I feel you
@BallisticSuperiority4 жыл бұрын
Wouldn't packing it into a case and surrounding it in foam dampen the cooling ability, and potentially over heat the cells?
@maineeveryday39913 жыл бұрын
Can someone tell me some information/specs in layman's terms on a US Amp 4300x. It's also connected to a "bridgeable" (connected?) 1000 watt amp with a capacitor and a 6 channel line output converter. Thanks
@ionut80914 жыл бұрын
where do you know that equalization does something
@tededonthugback2 жыл бұрын
Are you using the balancing board instead of a BMS? I've been looking into building a lifepo4 pack for my car, but most of the lifepo4 battery pack community is saying that you need a BMS.
@mikehoncho53602 жыл бұрын
I was looking for this comment! I’ve been wondering the same thing. Seems like he’s taking a risk by not having a bms
@tededonthugback2 жыл бұрын
@@mikehoncho5360 well, it would save about $150 for each battery pack you build to not have a bms if you don't absolutely need one.
@gavinmcclure80474 жыл бұрын
Sweet been waiting on this video
@kieranmorrison43484 жыл бұрын
Great video! Just one recommendation get an HA02 balancer they're more expensive but it will work better and last easy longer than that $10 one you have.
@catch22frubert4 жыл бұрын
Absolutely 👍, look into some higher quality BMS options, and maybe a lithium battery charger to hook them up for a proper balanced charge once or twice a week.
@mazda22844 жыл бұрын
i disagree , that balancer way more expensive and way overkill being that it will do 1000ah no problem , another factor is balance rate the HA02 only does 2mA balance current in our application , this balancer does 1.2A current for balance !!! so its way faster. @catch22frubert a full blown BMS for our use would cost 5 times what this bank cost IF you can even find one ... typically a bms for something like this would have to be custom made and most likely be from a china company .
@mazda22844 жыл бұрын
@@catch22frubert also NO !!!! DO NOT put these on a charger once or twice a week , you will ruin them ! these are not AGM ! its 100% pointless to charge these unless they are low like below 11v , and in that case id use a variable bench power supply not a charger designed for something specific . the bench power supply can be used for anything 0-30v
@Up2Trbl Жыл бұрын
I've been doing a LOT of research on these headway banks, and I'd really like to build one for my system. But my alternator charges at 14.9v, and I can't find a solid answer on whether or not that would be safe with headway cells. Don't want to start a lithium fire in my truck 😂.
@jeffsenecal41683 жыл бұрын
Hey Parker love the Vidoes, how do you regulate the flow from the car alternator to the bank? I know u have balancer, but that's not a amperage regulator, and there doesn't seem to be a BMS with a high temp low temp, hi voltage charge cut off, or any kind of high amp cut off protection, and no bluetooth to watch the bank. I'm glad u put itbin the battery box though. Just wondering, thanks!
@mikehoncho53602 жыл бұрын
Me too
@babyTOY-YODA7772 жыл бұрын
Good point. The alternator will regulate voltage and current on its own, based on the voltage provided fielding it, as well as the control input from the PCM. However, lithium does not charge the same as lead acid. 99% of vehicles from 90s to 2010s will only allow the alternator to charge around 2 to 4 amps unless the load is particularly high for some reason, like fans and lights are on. So there is regulation, it's called a voltage regulator and rectifier bridge. In a real serious setup I would use or make my own separate regulation control.
@kmccorkle694 жыл бұрын
How many AH's will support a 3K amp? Also are those the 38120 cells?
@JayTown19914 жыл бұрын
Great video. IV always wanted to try out lithium due to weight and space but I don't understand any of how to build and hook it up lol.
@rashad52864 жыл бұрын
Awesome ! Cant wait for the how-to vid !
@mazda22844 жыл бұрын
check out mine
@phila81604 жыл бұрын
Can you add links in description so we can order same stuff to make our own ?
@ParkerTheBasshead4 жыл бұрын
Will try to this evening
@champimp20174 жыл бұрын
With lithium or these headway cells do I have to worry about weather affecting them? Minnesota cold and heat?
@BramtheMan1 Жыл бұрын
Headway has 3.2 v 8ah lifepo4 cells , how many of those to build a 64ah battery pack?? If on each individual cell it says 3.2 v 8ah , why do you need 4 to make 8ah ??
@ParkerTheBasshead Жыл бұрын
Because you have to run 4 in serious to get 12v. 1 cells get 8ah at 3.2v, 4 cells gets 8ah at 12v. So you need 32 cells to far 64ah
@BramtheMan1 Жыл бұрын
@@ParkerTheBasshead Oh excellent, Thank you, I'm trying to order the items now , some are sold out
@BramtheMan1 Жыл бұрын
@Parker The Basshead Would buying a lifepo4 Renogy 12v 100ah work for 3200 rms system ??
@chrismanb2 жыл бұрын
So I can pair this with other battery chemistries? I have a lead acid starter battery and two deep cycle sla/agm mighty max batteries in the back.
@PhiMobileSounds2 жыл бұрын
Can we get an update on the headways if you still run them @Parker?
@CG17LIFE2 жыл бұрын
What about BMS!😐 What if you accidentally over-charge or over-discharge it, so it won't damage the batterys?🤔
@creationzthruair8343 жыл бұрын
Ok, so I'm first timer into learning all this and if a standard battery already has about 50ah, what are the benefits, or why should it be better spending this amount of money vs just buying another reg battery. What are benefits this type battery for system?..NVM..Just watched next video. Lol. Next question. Can you jump start lithium with another car if dies?. Can replace agm with lithium?
@davidspl4 жыл бұрын
What's the model of the battery case on Ali Express
@ParkerTheBasshead4 жыл бұрын
Added it to the description
@PuReAgonize4 жыл бұрын
Only problem i see is the bussing is super thin. Definitely need to thicken that up for the power your gonna be drawing.
@stevesteve17294 жыл бұрын
Bought some lifepo4 batteries from the site you recommended today. They were gone in a matter of hours.
@ParkerTheBasshead4 жыл бұрын
Yeah they go super fast!
@hustle_or_scam85454 жыл бұрын
Hey Parker awesome vid as always. Im just kind of moving to more comp style woofers and stuff and was wondering if i could make one of these but half as big so id stay around the 200$ mark? would that work, or does it have to be this size so it is 12v? sorry for my ignorance, just trying to learn as much as possible before i hook my new stuff up.. fyi I will be running 2 Db Drive Wdx g2-4 12s rated at 1250 rms 2500 peak each (tried to get xfl 12s but everyone is sold out even american bass) on a vfl 5500.1 which i think is putting out around 2500 rms... thanks for any advice.
@ParkerTheBasshead4 жыл бұрын
Yeah man so long as you have 4 cells in series you will be at your 12 volts. So you can build a bank with any multiple of 4. So yes 16 cells should be plenty for your power.
@duckthachampion52513 жыл бұрын
So can we buy str8 from you?
@lilspicytuna4 жыл бұрын
You’re the man!
@dirtfloorspeedshop1672 жыл бұрын
If you used one bank like this in the engine compartment and one in the trunk, would you want to use a 4s balancer on each or an 8s balancer on both?
@brettday84504 ай бұрын
How many cells would you need for around 12000 watts
@indyaudio71744 жыл бұрын
did you charge the cells before install? what charger do you use?
@JasonLeeFit3 жыл бұрын
The second I added the balancer , the balancer went up in flames... What do you think could have happened.
@joescott55582 жыл бұрын
The balancers restrict the amp draw. Basically like putting a fuse on the battery. If u get a 100 amp bms and your system draws 150 amps then the bms limits the draw to 100amp. U don't NEED a bms they usually cause more harm then good
@dee6964 жыл бұрын
it nice to see another guy with a sequoia doing audio setup...i taugh i was the only one lol
@DJKEYS-br1xh4 жыл бұрын
I probly take that 400 and just get a alt .. to start off Wich is what I'm doing now on my Yukon build . Not saying it's a bad thing.. with the bank construction tho. Good vid..
@ParkerTheBasshead4 жыл бұрын
Yes definitely a good choice to upgrade alt first 💪🏻
@brandonwilson88892 жыл бұрын
How many should I run for 7000 watts and how should I hook them together if I’m keeping my agm battery
@quinton78543 жыл бұрын
bringing this back, but do you really need to have 32 of them or would 16 be fine?
@MasterDJRenn4 жыл бұрын
What size are the bolts?
@matthewstringfield89244 жыл бұрын
I heard that you can’t run a lithium second battery if you have a stock acid battery is that correct? If you go lithium than even the battery under the hood has to be lithium unless I have heard wrong.
@ParkerTheBasshead4 жыл бұрын
I would run lithium with a regular battery but you can run some lithium with AGMs
@SpudicusMaximus4 жыл бұрын
The issue is resting voltage. Lead acid/agm rest lower than Lithium. What this does is cause the lead acid to suck power from the lithium while your car is off. So If you drive it daily, it's not that big of a deal, as the alternator will keep them goth charged up. If you are really worried about it, you can separate the lithium from the lead acid using a relay.
@10krms84 жыл бұрын
Cool u got any links to get the cells n box thanks
@ParkerTheBasshead4 жыл бұрын
Will try to post links this evening
@chaostheory22193 жыл бұрын
You explain everything really well. You think these would be good for a solar battery bank? 🤔
@nickkrug81574 жыл бұрын
U can get your alternator re-worked to higher voltage and buy this battery ,,, will work better...works great on my system
@nickkrug81574 жыл бұрын
XS Power D1400 14 Volt AGM 2000 Amp Sealed Car Audio Battery
I actually have a Brand X Alt that will be going on here soon
@james10739 Жыл бұрын
Nice I saw some used for $5 each I each I was thinking about getting like 8 for a starting battery maybe 12 would be better but 8 should work fine
@james10739 Жыл бұрын
And what I was going to do is use a bms just for charging possible with a large relay like a solenoid but that might not work well for you depending on your power draw but with a resistor in series for charging like a 1 ohm or .5 ohm to limit current so it doesn't destroy my alternator or the bms
@mustafahanif2252 Жыл бұрын
I have an option to install either 100 ah lead acid battery or 50 ah of lithium for my setup. Which do you think would be a better option and why?
@kevinthomas91594 жыл бұрын
Hey I was wondering if you have her heard of Dakota lithium batteries do you think those could be used in a car audio build
@lesteranderson33502 жыл бұрын
Have you made any that I can buy?? My system is lacking the lithium and that'd it. That's all I got left to be happy
@Regz-2stroke4 жыл бұрын
Amazing! Can you do a video on skar zvx or vxf I’m debating which one to get.
@ParkerTheBasshead4 жыл бұрын
I hope to this summer
@catch22frubert4 жыл бұрын
I'm also looking at both of these subs. It would be sick to get a comparison. I'm not sure they are exactly in the same category as far as price, but it's close enough I guess.
@marcusvargas40163 жыл бұрын
How many cells would i need all I have right now is an x18 v1 on a soundqubed 1200.2 for now until its broken in? Not very experienced in car audio yet
@TMusicLis4 жыл бұрын
Just learning about this, is there a need for a BMS?
@breedam3 жыл бұрын
Yes!
@mrhernandez739 Жыл бұрын
Awesome video bro, great stuff
@theultimatesauce4 жыл бұрын
The foam you used, is it fire retardant?
@heardandtested4 жыл бұрын
I'm currently working on a 3s 100p 300ah 18650 lithium battery. I'm gonna be running my subwoofer directly from the battery. I don't wanna hook my subwoofer to my car battery.
@russellcrabtree53142 жыл бұрын
How many watts does the 64 ah lithium bank provide?
@scotthilliard84062 жыл бұрын
Were the ones you bought used?
@ParkerTheBasshead2 жыл бұрын
Yep! From battery hookup
@bassboostedmaster79532 жыл бұрын
You think 48ah of these would be enough to delete the front battery and run 2000w rms on a stock 135amp alt?
@beenjamminwise8213 жыл бұрын
Two questions which balancer do I need the link has many options. Secondly how do I charge it what kind of charger should I get im assuming I will need one....
@toyotafan12344 жыл бұрын
I’m new to the lithium setups. Can this be charged by your alternator?
@ParkerTheBasshead4 жыл бұрын
Yep
@BASSHEADSLIM Жыл бұрын
Will this run my car as well as my audio system? I heard you can't add lithium to another type of battery like wet cell or AGM. I was looking to do a battery delete and just run lithium in the back.
@youngtwggoof2 жыл бұрын
You have to have a h o alternator to use 1 of these?
@chriss41894 жыл бұрын
What type of battery charger are you using for these?
@Bigislandguy2 жыл бұрын
Hey Parker, how are your lithium holding up? Do you still have voltage drop or had to replace any cells? Looking forward to your reply. And thanks for the sharing.
@ParkerTheBasshead2 жыл бұрын
They are still doing great!! Couldn’t be happier with them
@Bigislandguy2 жыл бұрын
@@ParkerTheBasshead Great to hear that. What type of battery do you have under the hood? I’m just wondering what to use under in my stock location . I have limited space inside so I would like to have something else either AGM or lithium under the hood. I’m a complete dummy when it comes to lithium technology. 🤦🏻♂️ but I do know I want to stay charging around 14.4.
@donnie62864 жыл бұрын
good job bro! can u post link for the box please
@ParkerTheBasshead4 жыл бұрын
Yeah man will once I get back to my computer
@kieranmorrison43484 жыл бұрын
Jehugarcia has a video on how to make this battery with all the parts in the description
@connorwhitaker6102 жыл бұрын
You can get the superbeast which is 96ah of headway for $250
@teamhud2 жыл бұрын
after seeing this two years later I decided to build a 96ah bank for my system. Hoping to stay above 13 for a full demo song. With the old battery I had in my car Id drop below 10v and my voltage protection system would cut on.
@ParkerTheBasshead2 жыл бұрын
Yeah man they are re going two years strong!! You should stay in the 13s no problem
@stanmondzelewski92533 жыл бұрын
How would you hook this up to charge with your underhood lead acid battery and alternator?