Budget Clicker Press for Leather Crafting [RU Sub]

[@strhandmade]

All my links in one place: direct.me/strhandmade Find my leather crafts & PDF templates: www.strhandmade.com/ www.etsy.com/shop/strhandmade All my PDF templates in one: www.strhandmade.com/product-page/bunch-of-all-pdf-templates-by-str-handmade

[@GabrielGosselin]

I respect a man that has an accent as thick as his beard.

[@strhandmade]

:D Thanks, man!🐗

[@ThisIsChrisWebb]

Absolutely love how genuine you are. Both of those other presses are super expensive for most of us too. You’re extremely humble and transparent, I think majority of us gravitate towards you for that reason.

[@strhandmade]

Thanks! Trying to produce content, i would like to watch when i started leather crafting.

[@Madein515]

Awesome stuff! I got my half ton arbor press at Harbor Freight for around $40us with a coupon. It's not super high quality but it has worked for everything I've needed it to. I used it to stamp leather but didn't realize all the potential. Now I just need to get some dies made. Thanks for making this vid. Can't wait to see more! 👍👍

[@strhandmade]

Glad to help!🐗

[@LaPatronaVlogs]

Ohhhh thank you now I’ll be going to my harbor freight for one

[@TJHutchExotics]

Where can you find dies?

[@larrycumba2741]

Love my 3 ton arbor press. On a large die that is inserted in a wood frame you will need a top plate as in the video.

[@benjismith593]

Thank you for this! Another press is a bearing press. Can get for around $150 at Harbor Freight.

[@rudyvillafana1925]

1ton abor press at harbor Freight las Vegas NV On sale For $58.00.

[@Annalorraine67]

OMG I’m so glad I found you thank you for this piece of

[@PINACI]

I use a half ton arbor press and stick a heavy duty steal pipe over the lever to give me more leverage power.

[@mtlgrlie]

Great information that i’ve been curious about for a while. thank you SO much for helping us newer leather workers out. 👍👍🙏

[@strhandmade]

My pleasure!🐗

[@sebastianross1050]

This guy is authentic....

[@murraykopp7464]

I have a 10 ton hand pump bearing press that I have been just needing to order the dies for. First got it for mechanical work, then have used it for when I have been steaming and bending wood as a clamping force, now for leather. cost me $300 CDN...usually more than one way to skin a cat:) thanks for showing what you are finding that is cost effective and still gets the job done...love it

[@the-nomad]

Thanks for this (and hi from a neighbour, I'm living in Latvia, near the border), just found a press for sale in Czech Republic, so will get it ordered next week and reboot my leatherworking.

[@elmokvalygar8503]

bought this a year ago, this item is must. I even drilled a hole to fit any prickin iron in case i need not to make any noise

[@strhandmade]

cool, its one more way to use it in workshop ;)

[@thatHARVguy]

I saw someone modify their 1 tonne to add a drill adaptor. That way they can attach pricking iron, punch, logo stamp or whatever tool for repeated tasks.

[@elmokvalygar8503]

@@thatHARVguy same uses for me too, its a must that press, especially if you anot "allowed" to make noise cause you work your hobby at home ;)

[@GaryMarsh2]

Great idea to use the arbor press. I have a few projects requiring multiple cuts, which will work perfectly for my small shop. Also, I just realized I've bought some of your patterns from Etsy. Nice work my friend.

[@LaPatronaVlogs]

Honestly for a women this is exactly what I need . Thank you 🙏

[@shanedodd3630]

Thank you for the videos this will save me a lot of money

[@Native_love]

You good sir are turning into my favorite KZbinr!

[@strhandmade]

Glad to hear it!🐗

[@zakwinter7376]

STR is an absolute hero! been struggling to find where to get custom dies from for ages and wasnt expecting that little added bonus to this video! always gives good advice, tips, tricks and information! thank you, and always continue to do what you do!

[@strhandmade]

Glad it was helpful🐗

[@walkersworkshop]

Good timing, just bought one of these yesterday

[@strhandmade]

Nice!🐗

[@oakridgereview1359]

Been using my #0 1.5T arbor for a few months to do sleeves and key chains. I love it!

[@strhandmade]

No doubt, very useful tool

[@marcd6228]

Good job with your channel BTW. You provide great inspiration and information for other leather crafter. I suggest to everyone to support this channel with monthly joining. It"s important to support independent creators who takes time to provide great content!

[@strhandmade]

Thank you! I really appreciate your support and encouragement to do others!🐗

[@martinuzunov9346]

Beautiful info. Thanks, man! Can you talk a little about how you come up with your wallet designs. Do you have a starting point or base measurements you always take into consideration like credit cards, etc?

[@strhandmade]

Good topic, will make something about that in future🐗

[@nikolays4148]

По русски такая вырубная форма называется "штанц-форма". В крупных городах несложно найти компанию которая изготовит ее по вашему чертежу. В интернете найти изготовителя еще проще. Реечный пресс тоже не является большой редкостью. Но для вырубки я бы выбрал пресс с большим усилием, на 1,5-3 тонны. Вырубать лучше на плите из LDPE - полиэтилена высокого давления: этот материал позволит оставаться ножам штанц-формы острыми долгое время. Некоторые разделочные доски делают из LDPE.

[@jakepenning]

you are awesome for this

[@seandepoppe6716]

Thank you! Just found your channel this morning subbed &👍😎👍

[@strhandmade]

Welcome aboard!🐗

[@Andrew-wb9kg]

hey mate, thanks for the tips, I am picking an arbor press now and was balancing between 05 and 1T press, now I know which one to choose. Realized I saw your awesome works on instagram after I saw your logo. Good luck.

[@MuseLeathercraft]

Thomas, thanks again for an excellent video! Your video production quality is awesome! Thanks 🙏 Gordy

[@strhandmade]

Thank you too!🐗

[@РустемАбдуллин-р1ф]

Привет! Рад видеть тебя и твой ролик! Хочу пожелать тебе еще больше заказов, ведь когда много работы это так здорово!!

[@strhandmade]

Спасибо!🐗

[@1-0totheOrient]

An inspirational video, thanks. I recommend Atlas Dies Ltd. They supply these types of dies for leather cutting. They’re based near Romford, east of London. I’ve bought the dies and they’re top quality British made. Just need an arbor press now, a one tonne press not a half tonne press! Although, Atlas have their own clicker press and would do the cutting.

[@strhandmade]

I have no doubt in every country you can find local companies which makes these dies, i already found here in Lithuania :) (wasnt so easy :) )

[@rudyvillafana1925]

What the address for Atlas Dies Ltd

[@egidijussiusis4801]

​@@strhandmade labas Tomai. Gal gali pasidalinti informacija kur Lietuvoje gamina tokius peilius?

[@strhandmade]

UAB Baltstancas

[@bluejeans8001]

Thanks for sharing 👍🇺🇸

[@yohana_etlaf]

Excelente video, muy explicativo, se agradece los subtítulos en español. Saludos desde chile

[@rakso383]

я такой же приобрёл,PROMA AP-1,у него в штоке есть отверстие на 10мм, сделаю втулку можно будет ставить фурнитуру(хольнитены, люверсы и т.д),брал т.к не хочу стучать молотком, соседи будут ругаться ,а с прессом много можно делать

[@lexxsladkov5580]

И как? у тебя получается вырубать кожу? У меня какие-то неимоверные силы нужно прикладывать, чтобы вырубить

[@PatrickPease]

Inches are metric, 10 inches is 24 cm because the inch is defined in cm.

[@strhandmade]

Inch is imperial system unit, not metric. And 1 inch = 2.54cm

[@АндрейСерый-д9я]

я такие штанцевальные формы изготавливаю с перфорацией под шнуровку.

[@chicagonews1878]

Love your wallets !!!

[@marcd6228]

Good job Again my friend! I also bought an arbor press 1 ton a couple of months ago on amazon.ca and it it pretty useful for logo marking! A good trick is to use a small magnet to keep the brass logo in place and have your hands free.I gained in precision with that trick.I haven't bought any die cast yet but I will sure begin with that same press before buying an expensive press!

[@strhandmade]

I have another way to make stamping precisely. Will show in another video.

[@marcd6228]

@@strhandmade great! I also saw that you sometimes heat the brass logo before. Does it makes a good difference? Do you do it only for some types of leather? Thank you!

[@strhandmade]

@@marcd6228 Yes, i always pre-heat before stamping, it makes more contrast on leather

[@marcd6228]

@@strhandmade i will definitely try!! Thank you

[@danielirvine7468]

Try getting a longer arm for you're press should give you more power

[@roseleathercraftsph]

I bought a clicker press via aliexpress too it's pretty affordable

[@strhandmade]

By my research its best choice according to price

[@roseleathercraftsph]

@@strhandmade I bought something similar to this tinyurl.com/y3slf42f it's around $148 but you can still find bigger clicker presses similar to this. I love it. And it has a bigger area for pressing too. The flat surface is a big help. But I live the idea of using an arbor press too - saves money and space.

[@joliski]

Very good and useful information. Thank You.

[@strhandmade]

Glad it was helpful!🐗

[@chrisparsley511]

Good ideas, keep up the good work.

[@strhandmade]

Thanks, will do!🐗

[@6thMinute]

Just want to comment how this helps us saving money!! 😍🤩💖 Thank you for the tip! Subbed and liked!! Looking for more content from your channel!

[@strhandmade]

So glad!🐗

[@danielirvine7468]

I can't find the AliExpress link where you get you're dies made do toy have it still

[@ralphblack]

Man, i just came across this video. Today i bought a hydraulic bearing press for my leather crafts. Unfortunately, i couldn't find the arbor press to start with. The bearing press is a little slower but much stronger.

[@strhandmade]

Arbor press option is the best for small/beginner workshops, it doest cost much and do not need much space. Force to punch is quite enough, unless you punching 4mm leather :)

[@albertoarnaizt.9746]

Felicidades por el vídeo, es una gran ayuda este tipo de información. Yo ahora estoy pensando en comprar uno.

[@filipbanh]

Great video, I've been looking at one for weeks now. For about 100 euros I can get a 1T press delivered from Amazon.de here in Europe. I was also thinking of using it to stamp my maker's mark, perhaps set some rivets and if I decide to go that route, use it to cut with smaller clicker dies. I'm glad yours suits You well and that even with smaller pressing force of 0.5T it works well for you.

[@strhandmade]

I believe 1T slightly bigger. But when i bought it, it was for stamping and it was more than enough ;)

[@mavisinchap]

Hello! Can you share the press's shopping link? Thank you.

[@AndrewMurphy8383]

in the usa try looking at hobbor freight for armor press

[@violetviolet888]

It is "Arbor Press"

[@irapelletier5506]

I always wondered where to get the cutting dies made, thanks!

[@ahmedelkeshk4384]

Thanks for your info. You share with us ❤️💐

[@strhandmade]

My pleasure🐗

[@lioati]

I like the idea, I also tend to look for alternatives such as this one, also then video is very well done, you just got a new subscriber here, but I'm not sure I would go with this over investing in a formal hand operated clicker press.

[@strhandmade]

For sure formal clicker press is better if you have option for that :)

[@lioati]

@@strhandmade Indeed. If I ever get an arbor press I'm totally trying this. I'm currently cutting by hand and I don't have an arbor press or a clicker press, so I think I will eventually try to get one of the two

[@mantaszmenskis5619]

I have dake three ton press. Is good press.

[@KateMondor]

Very interesting. Thanks 👍🏻

[@strhandmade]

My pleasure!🐗

[@triplecoutdoor7495]

where can I have my dies punch plate made?

[@aaronacj]

Great vids

[@adham_z1463]

Wow

[@1arpa]

Would 0.5 tons be sufficient for leather work? The product sold in my country is only 0.5 tons

[@strhandmade]

I think for leather up to 2mm thickness should be ok

[@1arpa]

@@strhandmade Is the Arbor Press you use 1 ton?

[@abzalacom]

Probably everyone goes this way of finding an inexpensive press. As well as finding the corner punch.

[@catd281175]

Thanks for the info!!!

[@radengilang2773]

Thx u.. so helpful

[@strhandmade]

Glad it helped🐗

[@ricardoquiterio741]

wOW. Amazing explanation and good information. Could you tell me if this 0.5 ton press is capable to cut 2.5 mm leather? Thanks man.

[@strhandmade]

Its more depends on die size, im usually working with 1.4-2mm leather have no problem.

[@ricardoquiterio741]

@@strhandmade Thank you.

[@ДенисЕвменов-ь6и]

Слушая данного мастера и его акцент кажется что он свой)) А он русский? XD Ладно если серьезно. то крутой мастер, отличные идеи, хорошие проекты, так держать. Привет с Сибири

[@acorvus3459]

Латыш он, придет и русский знать должен))

[@strhandmade]

Спасибо! Нет я не руский. Я литовец, но на русском говорю и понемаю с детства довольно хорошо. Писать кириллицей не умею, но для этого Google translate помогает. С английским у меня всегда было не очень, но стараюсь :)

[@Craftpari]

😊👍

[@doxatec9]

Where did You buy dies for cutting leather?

[@strhandmade]

Check link in video description

[@johnmaguire2613]

I cannot find the link to the makers of the cutting dies.

[@strhandmade]

Check video description, you will find :)

[@westboundpony]

Got my 1 ton arbor press at Aliexpress for $60 all included. They had it in a US warehouse and it was delivered in 4 days. I agree, it is an awesome tool to have.

[@strhandmade]

Main issue with this device is delivery, when its possible to get from local warehouse its very nice :)

[@westboundpony]

@@strhandmade On that note, I wanted to let you know that there are a couple of Aliexpress vendors selling dies of your card wallet (the single one with wrapped top leather). Their pictures show your logo. Let me know if you want me to send the link to you.

[@strhandmade]

Yes i saw it, tried to report, unfortunately not much can do about that :(

[@megacanam]

@@strhandmadecopying is the highest form of flattery! Just keep innovating and designing new stuff… we will keep buying it!

[@russellcrase1983]

👍 good info

[@strhandmade]

Glad it was helpful!🐗

[@mavisinchap]

Hello! Thanks a lot for sharing the information! How did you get in touch with the seller on Aliexpress about designing and producing custom cutting dies? Stay healthy!

[@strhandmade]

Hey, drop private message to seller

[@bruhreis]

hello I'm from Brazil. I don't speak your language, unfortunately. Could you tell me the number of this press? congratulations on the video and thanks for the great content.

[@strhandmade]

What do you mean number? Its 0.5 ton

[@lexxsladkov5580]

Я может что-то не так делаю? Купил такой же на 1 тонну, но чтобы вырубить нужно столько усилий приложить, капец короче))

[@strhandmade]

если вырубать большие детали, лучше всего работает если начать с кагого то угла и направить всё давление туда, и так обаити вогруг. если деталь небольшая, карманчик например, токда всё работеет обычно

[@dreamwarriors979]

4 Ton is optimal!!!

[@strhandmade]

Sure, more is better, but 0.5t also does the job well.

[@violetviolet888]

Danjo Nagual Crew: Are you gifting one to Tomas?

[@Afaf-nz5cu]

I did all the steps of the pressure machine and it didn't cut the leather ☹️ my dreams faded

[@povilaszickus9847]

Gera matyt dar viena lietuvį dirbantį su oda😀

[@xqz666]

В литву ? А я понять не могу дружище, почему у тебя такой русский акцент(как у мутко спик фром май хар). Крутой контент , я тоже начинающий.

[@strhandmade]

с Русским у меня на много луче с детства могу говорить , акцент на много меньше :) на английском можно сказать начел говорит только тогда, как начел делать эти видео, так восточно европейский акцент на всю катушку :D на вряд ли когда не будь его получится избавиться :)

[@xqz666]

@@strhandmade это изюминка, выдает своего человека за рубежом, хоть я там никогда и не был). Привет из россии.

[@ToshaViktorovich]

Эх, я бы себе такой пресс взял, но нет лишних 120$ на него.

[@3e1eboba]

Привет! Ты русский?) Я подписался))

[@INN80]

Латыш,русского не знает

[@strhandmade]

нет, Литовец я🇱🇹 :)

[@ИльяМозуль-й8к]

Кепка вроде не ровно надета

[@strhandmade]

Надо будет переснять видео :)

[@acorvus3459]

A-format russia press

[@acorvus3459]

Company have good press and punches

[@prawdydawca13]

@@acorvus3459 do you have any link? I can't find it on the web

[@chicagonews1878]

Weaver hand press is just overpriced it’s ridiculous everything they sell is beyond its value !!

[@strhandmade]

Probably its more for businesses not for hobbyists, but you always can go with more affordable alternatives :)

[@МишельДжоловани]

В ЛИТВЕ ЗАБЫЛИ РУССКИЙ ЯЗЫК ???!!!!!!!!!