For anybody needing to know, that “vacuum hose source” is very EASILY achievable. It’s your common cruise control, takes 5 minutes to take out and the fuses and you can have that exact hose for your turbo build! You’re welcome!
@oompaloompaheadass44052 жыл бұрын
5:11 typical honda moment😂
@CJBuilt2 жыл бұрын
😂😂 always have the laptop on deck Except When my girl rides along, she becomes a tuner at that moment 😂
@oompaloompaheadass44052 жыл бұрын
@@CJBuilt forreal dude😂 whenever my girl is in the car she gets to hold the laptop no matter what
@CJBuilt2 жыл бұрын
Ahah I feel that. She loves holding the laptop🤣 although she does love when I’m tuning and she’s driving as well
@aaronfraser234710 ай бұрын
That spark plug cleaner is mint
@CJBuilt10 ай бұрын
Comes in super clutch sometimes 👍🏻
@peterbryant35847 ай бұрын
Ok pretty good video that thing is clean bro
@CJBuilt6 ай бұрын
Thank you!
@infinitex1732 Жыл бұрын
If you don't mind how much did going turbo run you? Mainly for the turbo, intercooler, oil lines, BOV and wastegate
@CJBuilt Жыл бұрын
Yo what’s up!!! Message me on Instagram and I got you! @CJ.Built
@Trakyakizani9 ай бұрын
What should be the healthy pressure for the original engine?
@CJBuilt9 ай бұрын
You mean as in boost pressure? To be safe, on a turbo this size I would stay around 7psi. You can shoot for 10PSI but that does begin pushing the limits depending on how you drive it and how the tune is. 7-8PSI is a fair middle ground of fun and safety. On a smaller turbo you can probably get to 10PSI without an issue. PSI is not the concern, it is the power the car outputs. Bigger turbo = more hp per PSI Smaller turbo = less hp per PSI Hope this helps!
@shawn66846 ай бұрын
I just started getting back into building another but turbo this , i have 96 y8 but i cant remember what ecu i need if im going turbo for tuning ? Any help would be appreciated sir .
@CJBuilt6 ай бұрын
Hey how’s it going! You will need to go OBD1, since it is a Y8 you’ll need a vtec ecu. P28 is a popular one that’s a go to for a VTEC ecu. You’ll just need a jumper harness to convert the obd2 plugs to the obd1. Any questions let me know!
@shawn66846 ай бұрын
@CJBuilt thank you much sir !
@richardmontalvo35139 ай бұрын
Man I need a manifold a/c friendly 😢
@CJBuilt9 ай бұрын
They sell some that are A/C friendly, just may need to notch the block a little or route the turbo in the reverse way than I did. I tuned a car not too long ago with an A/C turbo manifold
@richardmontalvo35139 ай бұрын
@@CJBuilt been looking but No luck so far 😣😣 I message you on insta too
@CJBuilt9 ай бұрын
@@richardmontalvo3513 You messaged me recently? Message me again! We can see what we can find