Veteran Built this 1.6 That blows us away!

[@MafiaboysWorld]

Respect to all the people in the armed forces fighting for our freedom, wherever in the world you are stationed. 👍♥️

[@elonmust7470]

@Klip One see this is why I can't read the comments if PFI videos. I finally find a nice comment amongst "bra" comments & some loser has to write "cornball" underneath. Pfft.....

[@MafiaboysWorld]

@@elonmust7470 It's KZbin, I expect atleast 10 people per video to argue and disagree with anything that comes from my mind on any topic, be it what I say on camera or in comments. 🤷 It's worse when it's MMA and Sports channels, usually multiply that number by five or six. 🤦

[@t.g.1124]

Freedom 🤔🤔 from where oh what ? Because the one from Iraq. Was about petroleum. Syria about petroleum. Plus sell guns under the table is more about this topic my blind people 😁✌

[@elonmust7470]

@@t.g.1124 "America is such a terrible place, that's why my whole village traveled 4000 miles to go there..." America is 250 years old dude, we are responsible for a who hell of a lot more than the war with Iraq, the one where NATO was in agreeance & compliant.. As for selling guns under the table, it simply does not happen where the seller is an FFL holder (I've been to gun shops & gun shows all over the country, it does not happen.), yes private citizens make 3rd party transactions all of the time, but the crime associated with those sales is pretty mucn nonexistent, in my demographic at least... I hope you don't live here in America dude, that would make you one big hypocrite.

[@wesley8599]

Much respect. And to the thread of comments here, just remember whatever reason a war may be fought, the service and dedication of all serving deserves respect. Don't let any part of the situation dissuade you from that. Love and Respect

[@debhill226]

My son, Alex Haak is the veteran that did the build! Awesome job!!!

[@Underpantsniper]

Your son should be proud of what he has built, it is a very clean little set up. 400hp on a single cam engine is fantastic!!

[@TheRadChannel]

I bet I speak for all of us here; we need engine build specs!!! He did a great job!

[@detonationpyrotechnics4156]

You should be very proud of the man you have raised mama .

[@billiedean9218]

Would love to have Brent tune my crv when I get done with it but he's so far away.😢

[@hegeliandetective1034]

Phong's DNA test came back, 100% All-Motor

[@Wafflebrah21]

#1 comment

[@claudedottin1312]

Ahahahaha

[@JAG220.]

😂🤣🤣🤣🚀🚀🔥

[@gerardcowan155]

WE NEED STREET PULLS FROM MEXICO AFTER ALL THESES TUNES LIKE THIS SO THEY SEE IT!!!!-@

[@1chip4you]

Gerard Cowan Yeeeeeees.

[@1439of2000]

Hard to gauge with snow on the ground

[@Xelsworthx]

I love how Jamie knows everything lol, best right hand man there is!

[@mcleppercon]

Its just an all around great team

[@GreaseMonkGarage]

It’s google ....

[@MrAyybee2cold]

@@GreaseMonkGarage lol yeah no

[@BaggedDev]

I love single cam content, so relatable for so many people! Love my Turbo Z6!

[@qwerty-fc9ix]

Seeing phong hanging out in the shop makes me happy.Good content guys keep it up

[@raidnova1474]

I know right phong is just cool lol .

[@joemartinez21024]

Im suffering from bad anxiety and yalls positivity helps me thank yall so much wish i could get my rex tuned by yall

[@ibrooksie]

Sending positivity. I also suffer. You got this bro.

[@joemartinez21024]

@@ibrooksie thanks bro i hope u have a good day

[@CraftsmanQuad19]

Rex...is that a WRX or did autocorrect spaz out at CRX? I had really bad female induced anxiety for a few years. Finally cut her out and have never felt better. Keep pushing bro, shit gets better

[@joemartinez21024]

@@CraftsmanQuad19 thanks bro and yeah females will do that bro...... its a crx

[@mcleppercon]

Just move at your own pace brotha things get better when you have a positive outlook on life. I would definitely have to agree with you about how positive everyone at pfi is. There just all so humble and great people!

[@davidthompson245]

Phong, Brett and Jamie make my day. Watching them perform surgery.

[@epikmeroッ]

18:05 phong just casually resting on the car while its doing a pull lol

[@Cre8toR87]

@27:50 too lol Champion.

[@spar8334]

Ye he crazy ive seen tires blow out and straps break

[@stranger534]

He's thinking "Not NA, could lose another 800 lbs, sounds like it's not ported or dimpled, the exhaust is too quiet....." I can tell these are the things that keep Phong up at night

[@Cre8toR87]

@@stranger534 😂😂😂😂

[@MadMaxx570]

He's probably so used to N\A noise levels that he didnt think it was running

[@nparbs]

That's a wicked amount of power out of a 1.6L! Thanks Brent for the video, and thank you Andrew for your service.

[@willecutlip]

Love the way that Brent conducts his tuning - very methodical and thorough! #Respect

[@awpgaming7505]

as a vet to a vet thanks for your service and welcome home man! enjoy the whip!

[@therobb5738]

"Phong won't even look at me when I talk about turbos"

[@StraightWhitearrow]

What he say 😂😂

[@shawnhelzer874]

Love single cam. I'm finishing my single cam shortly would love to have brent tune it.

[@LS__812]

Always love me some single jingle content!! PFI is so RAD!

[@jeremyhearn8941]

That's one of the cleanest single cam build I've seen! Beautiful car! Love those wheels! That baby might put my current build to shame when I'm done! Love it! Props to the owner on the beautiful car!!!

[@mustnotsleepmustwarnothers6463]

Those d16's are still killing it 30 years later, always impressed by the builds I see of them.

[@swissmochaj]

This has to be one of my favorite cars I've seen on the channel. Not exactly sure why but it is.

[@MrBassbump]

The chop chop from a 1.6 might be the reason

[@BillStraub303]

Jamie and dial a bombs😂 “Just give me a little bit”... Jamie- 6 turns😂

[@itshaka3813]

It's awesome to see there is still love for the D series!

[@jesuscabrera6865]

I genuinely enjoy watching this channel. Its litteraly like working on your cars with your friends no scripts no bs with faking accidents and blowing engines

[@EskoMorko_]

I'll never stop admiring this build. So neatly done and sounds very healthy!

[@charleslynch1618]

Hey Brent it's Charlie thanks for the tip on using welding wire in a tight spot to pull on a tention pulley that was a great great tip..👍

[@devin4109]

thank you for your service Andrew!

[@Xelsworthx]

You guys seriously have the best Honda crew out there between Jamie Fong Brent and the rest of the team. With all of your guys connections I just feel like as far as the Honda dream team you guys have it in the bag!

[@wheelietime7062]

Life goals- Build a Honda motor for boost and have Brent tune it...

[@NeoMK]

@@neo1231 Yeah I mean he totally half assed the tune, he could have totally gotten 439hp out of that 1.6 liter... 🤔

[@wheelietime7062]

K Charles

[@NeoMK]

@@neo1231 HP is just a value given to work done over time utilizing torque as the base reference. So you can literally calculate the torque based upon the rpm and hp. Thinking that Brent doesn't have rpm input is just ridiculous.

[@Turboboob]

BoostOnly from the looks of things... he has put together and tuned some pretty fast cars... so maybe just stfu lol

[@liltuck737]

BoostOnly I notice around the 20:00 the tach in the car isn’t moving at all either, maybe the cars tach output is the issue?

[@epatters1494]

Building my y8 for 600 this winter, this is definitely inspiring. 👍 Love watching all the different content you guys put out.

[@krulestreetkarzproduction2754]

I got 500hp finishing up on my y8...

[@matthewsanchez956]

Speedfactory rods and vitara pistons can get ya to 500 for only about a month tho lol

[@Casey_and_Cars]

Speed Factory rods are trash. Compression is way too low. VHB Engines high compression Viatars and Ebay H beams, are a far better setup, and raises compression to 9:1+

[@iammaiky2797]

I have speed factory rods on my turbo d16z6 making 542hp been running the same set up for 2 years now and its still ripping @@Casey_and_Cars

[@gotti4519]

@@Casey_and_Carsthankfully you want low compression for boost

[@seanp777]

Thanks to Andrew for his service! Love the video. Really like Learning and the PFI Fam knows so much. Hope you guys get up north to track close to me.

[@raymondreiff8170]

Successful people always have haters, As a mechanic I am not one of them, Because dedication like Brent shows is 100% PRICELESS 👍🇺🇸.

[@Zrclle]

Brent is the happiest person I know. He loves what he does

[@georgeyoung2000]

Veterans rock thanks for the service

[@InsideOfMyOwnMind]

I haven't seen every video on this channel but this one showed the most professionalism and teamwork I've seen here so far. Very nice to see. Y'all worked really well together.

[@yokel_honda]

That's beautiful. One of the nicest bays I've seen in your shop!

[@songvang8165]

It's just something about the soch builds that i love so much. I mean wow. All that power from such a tiny engine. Honda rocks..!

[@dgclassic5591]

Awesome single cam tune!!!... Fantastic efforts by all to get the most it could give. ✌️out and be safe out there...

[@randyledford6496]

First one I've seen with no exhaust smoke anywhere at anytime

[@freddygeez4646]

trim texture is stuff we used to put on plastic archways for drywall corner bead. it's real sticky

[@TheChristiondavid]

Thank you for your service Andrew stay safe love your eg single jingle build

[@barron1122]

D series getting down boiii 🔥🔥

[@madchanicsgarage2969]

Jamie can run his own shop for sure. He has a lot of knowledge and is just a genuine all around guy

[@azaziah28]

18:05 Phong thinking i could gap this with my all motor

[@brendanmccarthy492]

He could. Phong runs mid 10's in that light asss car.

[@beardymcbeardenstein9669]

Thank you for your service. Sweet build.

[@mvxyetti9262]

Man that last pull was crazy great video man! Started with mid 200s all the way up to 438! Damn!

[@Tampaboys]

Such a cool single series that the pull with the 345 sounded sick. Awesome job guys 👏👏

[@user-cs6us5px1s]

Jamie is superb at describing what is going on! top work

[@pFbSpecV]

Not bad for a single jingle!! Nicely done pfi!!! This guy is gonna rip!

[@143MYVTECEF]

Great power!! Strong straightforward build!

[@gingersquatch9844]

Absolutely AWESOME build, I actually am in the process of building a fully forged 1997 D16Y8 civic coupe with block support system and hope to make 550 in race tune and 350 in street tune!!!!

[@c0c0asauce]

Man, it must be one of the best feelings to have your car tuned by PFI and get to share the memory with thousands of people.

[@RustyWells2]

Man it's so nice having Phong at the shop! 🦅🇺🇸🦅

[@shiffer253]

Hey Brent and the PFI guys, I love watching these extended cut type tuning videos of yours. Something I can't help but notice that people are almost always unprepared for the dyno. It gave me the idea to ask you to make a tutorial or educational type video. Maybe detailing what you should go over before bringing you car in to save time. Forgive me if you've made this in the past i've only been watching for like 1.5 years. I love all the content. Keep being great people.

[@5PYZ3R]

kzbin.info/www/bejne/pmrIZq2bfKlritk

[@shiffer253]

@@5PYZ3R hey thanks. I must have missed it. I honestly didn't look though lol. thanks anyways.

[@thomasmccall1076]

I just wish yall ripped the tuned cars on the street at the end of the vid everyone loves street pulls

[@CKing724]

I heard Mexico is only a 20 minute drive from their shop to!

[@PC55WRC]

@@CKing724 State of New Mexico is, but not actually Mexico itself. Sombreros at the ready! 😁

[@smoothpotato957]

Paul Cauldwell you ruin it for everyone Paul, go back to America we all live by the border

[@Hayawasa]

I wouldnt see many people being cool with bald tires and no clutch when they get their car back.

[@carguy697]

Sunday night viewing sorted , thanks again Brent 🤙🤙

[@StraightWhitearrow]

The good attitudes the good times earned a sub.. keep up the good vibes 🙏

[@demonic477]

that boy did a great job for his parts list on this build the only thing that could let it down is the stock crank. I don't know what a stock Honda crank can take under boost but with the rotating assemble he used it's a solid street or track package that should run for years .

[@Elchapo62]

I like this kind of built, the Veteran take everything to the last detail.

[@suprintegy95]

I fell out of the Honda scene about 10 years ago but man, after watching this video makes me want to get another d16 hatch!

[@brentiaconelli6484]

The Honda aftermarket support is insanely advanced from 10 yrs ago. There's transmission gears that actually hold hp and cheaper parts

[@BassManBobBassCovers]

Very insane numbers for a single cam build! But with the right parts and the right person building/tuning it makes all the difference!!

[@Jared535]

So glad to see Honda’s still gettin it.

[@Hanibul_Lecktor]

Not a Honda fan but I have to admit, that was entertainment!! Stock crank though with all those nice parts.

[@RogerFleury-rh9wr]

891st! WOW, haven’t seen Phong for years. He finally took the leap into TURBOs. His engines are always so perfect. Great job Brent and the gang. Roger in Pierre South Dakota

[@rickscott6239]

It's easy to tell when Brent is starting to have some fun. I think there's only one laugh like the world. lol 😎💯

[@j.finesseflights1403]

"SLEEPER" with 4"s of pipe stickin outta da hood... ; D

[@jonkeau5155]

J.FINESSE FLIGHTS since most muscle gear heads and old guys think that imports ain’t sh*t and anything they do is just to sound like a powerful weed eater it’s still a sleeper... they dont know you can make big power with modern tech on a four-banger

[@thewakz]

also..."SLEEPER" with a license plate that says SLEEPER. Why don't people know what sleeper means anymore?

[@brentiaconelli6484]

The confusion of what sleeper means on KZbin kills me too! I gave up correcting ppl... Its a full time job

[@stripahstriker2604]

Sleeper cuz its a single jingle packin a punch once he pop the hood people will look and say oh its a single cam and get gapped most people never seen a single over 250hp so 400 will knock the socks off alot of cars thats why its a sleeper

[@brentiaconelli6484]

@@stripahstriker2604 WTF sleepers look original.. Not lowered with rims, stripped out interior with 1 seat. straight pipes, giant intercooler cut into the bumper and a wastegate pipe sticking out thr hood 4" blowing flames and making very loud turbo noises!

[@jamesgraf2767]

Makes me smile when Brent gets excited

[@rogerstrikewell]

I owned a stock D16Y7 in my hatch and it screamed but made maybe 90hp lol. This ride looks so nice.

[@roysongarvey2261]

Man that is awesome. Wow!! Encore pull-and it still has more in it-if Andrew puts a electronic boost controller on that beautiful setup he will really need to strap the block together. Brings back memories here.🥳

[@tonycarter4809]

This is so rad yesss for the moon tune on this single cam 🔥🔥🔥🔥 keep up the videos it's just so awesome to watch and good to see goofie built videos get that much better keep up the hard work lads

[@dra93n]

What a sweet little rocket! Brent, you have the best job my friend!! PFI crew are awesome!

[@GVlVG]

my civic does the idle thing his does at 12 minutes. what causes this?? ive been stuck for months

[@larrysutton6530]

I just watched a 1320 videos clip about a 600HP all motor Civic and all I could think is Phong will be partying with this guy one day soon and battling for the US record one day soon because no one knows all motor better than Phong

[@relate97]

I swear I got on that video like 3 mins after it was uploaded and half the comments where pfi and phong lmao

[@larrysutton6530]

@@relate97 I wanted to say something about Phong but I didn't want to down play what that gentleman did

[@J_Ike845]

Phongs car is a tube chassis car , the JBR car is a stock chassis . Two different classes

[@relate97]

J Ike you typing that same comment on both videos lmao

[@J_Ike845]

Bryan Smith A lot of confused / misinformed fans 👍

[@wesleymadsen4357]

Who else wants the NSX to eat on the Dyno!?!

[@pottnah6152]

Slow lol

[@keyman1969b]

Tell Andrew I'm a fan! Lol wicked little thing!

[@PolishedMobileDetailing503]

440 on a stock sleeve build I like. No matter what motor d h f b k they all make power with a snail on her back

[@wackomanx]

The gray Regamasters/Slipstreams look super nice against the white. They are a simple yet classic design and I don't think anyone can go wrong using them on a Honda or Acura. That certainly is one D series I wouldn't mind owning. The only thing I would change would have to be the exhaust/wastegate setup. I would run an exhaust out the back and have the wastegate dump under the car.

[@blaznmax8877]

I love the way single cans sound

[@MrMadkaw400]

Pfi best runners in the business

[@elonmust7470]

People often overlook the single cams. Sweet work & thanks for the service.

[@iTzDaNiiLo]

Gotta love some single jingle content every now and then

[@rosejimmy123]

Single Jingle for the win! Good work guys.

[@kylemilligan752]

Sohc d16 adjustable cam sprockets are all jacked up. A6,z6 and y8. Sometimes you must grind more slot in the distributor to phase base ign timing

[@dannyr3346]

A year ago sharing coronas and tuning cars. This year y'all are hiding from corona and tuning cars 😂😂

[@jaredthisdelle5617]

Y you worried it was built by a veteran. there the best mad respect and thank you for all u have done man cheers great vid pfi..😎😎😎😎

[@bobbybruner7595]

What turbo? Im thinking of a gt35802r with a 63ar exhaust housing but this setup seems perfect whatever it is.

[@jordanstanfield7361]

Something about a 1.6 sohc with big power that always made me smile

[@kevinhedgecock5046]

That is awesome.....Something I've never checked into though....How much do you charge to dyno and tune a car ? Is it a flat rate or do you charge by the pull or performance enhancement or by the hour or what ?

[@FBO305]

They have a website !!

[@kevinhedgecock5046]

@@FBO305 I looked and couldnt find prices and stuff

[@kevinhedgecock5046]

@@FBO305 I will look again thanks

[@detroitredwing919]

I learn so much on this channel 💪 thanks guys 👏👏👏much love from Detroit👍

[@jeffibuilt]

That thing runs great. No smoke! Solid build!

[@537R4HC]

so dseries having those issues like head gasket / stretched head studs whats the fix ?

[@PFIBrent]

We like to insert the block with timeserts and use Srt4 11mm studs

[@bobbystalder3323]

Great work Brent squeezing out that power. I'm a hot rodder at heart and hope to get in to a build one day. I enjoy learning thanks PFI Speed !!!

[@DrivewayRacing]

rotate the crank counter clockwise just enough to put tension on the front side of the timing belt. (this is an important step as it removes all the slack in the timing belt) - just for future reference so you dont have to use weld wire to try and tension the belt

[@PRZJ91]

3:05 when he starts it, it sounds like an old diesel truck 😂😂

[@Giova590]

Every turboed SOHC 1.6 engine ever 😂😂😂

[@_Professor_Oak]

The exhaust is coming out the hood bro, a lot of cars with hood-exit sound like this on idle.

[@2000stang5]

What kind of starter is on this? I've never heard a Honda starter sound like that.

[@PRZJ91]

Albus Dumbledore I didn’t mean the idle haha I meant the sound the starter makes lol

[@outdoorscanada9493]

@@2000stang5 lmfaooo i thought the same like huh that doesnt sound like any honda starter ive ever heard??

[@__Gw]

That cane sugar in the mexican cokes makes them way better

[@MapleSyrup89]

I painted my z6 valve cover that same wrinkle black and have the same blue washers and wires lol

[@johnmichealsburnett8888]

Hell Yeah... Let's Go! Awesome tune video Brother and that 1.6 build is rowdy sittin in a clean hatch Nice job to the builder 👍👍 PFISPEED/BOOSTEDBOIZ Rcks!!! 🤜🤛😎🔰🔰🔰💪

[@Danger-Dave]

Thank's for you're service Andrew! And for pressing Brent for the Moon tune... : )

[@shawnmcmanaman1]

I do drywall for a living and I use trim Tex adhesive all the time 😂 that stuff is awesome

[@elijahmartinez1502]

I just met the guy that has this civic in Colorado Springs, verry dope build 🔥🚗🧼

[@dustincousins3364]

You guys are awesome,wish I was closer to your shop. I think I had more goosebumps just watching the last 4 pulls than y'all had there feeling it rip 😂😂😂 Great Job with the build Andrew and thank you for your service Sir. Guy on ecu calibration is clearly loving what he's doing and doing what he loves. I'm an new fan for sure 👍🏻

[@A-stray42]

Some day, when I get my shit together as an adult, I want to bring my little car for you to see it. It's a last of a kind hyundai, with a cam (Singles life) and a air filter. Best part is it has a carb, so lots of confusion abounds with the whole "I have a wide band, but nothing is actually reading it" syndrome. Much love from the west slope.