Budget friendly AR folding stock

[@vegasranger]

I cant find the website. Are you saying Trevel or Travel?

[@bizkit2147]

As long as it works that's good for me

[@vegasranger]

You can tighten the hinge screw to make the hinge stiffer.

[@truenation9890]

Is the adapter still holding up??

[@ConsensusX]

Here for an update

[@axeaces2330]

Ordered it from that site, still haven't received the product and it's been 2 months

[@papidagunguy]

Still haven’t got it?

[@bradyknowzbest1149]

Get it from ebay next time If it don't show up its guaranteed money back

[@Mike_The_Hog_A_Nator]

Got mine in a few weeks after ordering from Texas.. Fits & works perfectly on my AR Platform. Waiting on my SBA4 Clone now.. I'm tired of running this blade brace. Those folding adapters are still expensive as hell if you buy the "Luxury American Made Part." Thanks for the info... Mine is tight & sweet!! A flat $25

[@davidshechtman4746]

The 'blades' look like something that fell off the bottom of a semi and was found laying by the side of a highway

[@210gunz]

where did you orde yours

[@bryonyoung8975]

I didn’t find the site what is it

[@terrancedavis6249]

Yes sirr... Mines work perfect & also a cool $25 bucks🙌🏽

[@unfortunateteller2279]

When we’re talking parts breaking and firearms you’ll be lucky if it’s “no harm no foul”

[@zachariahadams]

People will complain about american made and then drop $2000 on a CZ

[@viking_sasquatch]

I bought this product. Comes shipped directly from China. Which I don't really care. Took a month to get it in. Not too bad I guess. But the product itself is crap. Spent 2 hours with a drill and wire brush to take off the coating on the threads to get the buffer tube to thread in. Finally got it to fit. Seemed to work good opening and closing slowly. Tried opening fast and it bent. Bent it back. And it works.... So I would not recommend this one. Better off spending the money in the real thing. Not a cheap copy. Also came out of the box with rusted areas.

[@Strawman333]

Could be a “harm and foul” if that thing doesn’t function when a deadly situation occurs. I’d rather pay extra for known reliability. Good luck and stay safe.

[@anonymouse7394]

That makes no fucking sense since it works the exact same way

[@studentofthe556]

@@anonymouse7394it makes perfect sense

[@incredible3214]

​@@anonymouse7394Quality = Durability under stress. A cheaply made product may break when you mostly need it.

[@FatgirlMickey]

It's called the sylvan folding but stock on sale now for 169.00 free shipping to your door works for all ar products.

[@nushinebob]

That is not the Sylvan folder. It's a Law tactical Chinesium knock off. Probably built from some cheap aluminum or cast pot metal. I've seen a few of these things as low as $30 . All there is to say about that is, you get what you pay for! Would not have that on anything I would ever have to rely on for self defense.

[@austinclark3809]

​@@nushinebob that's EXACTLY what it's made of. you can see the wear on his latch if you look closely. I know cuz I have one. you should have to push the button again to close it. it should just snap in. these cheap ones dont. they bend the aluminum and break. I had mine on for 5 min and took it of threw it in the trash. the original design was made from hardened steel. it's why it was 250 dollars.

[@studentofthe556]

@@austinclark3809 I have the SA folder on a range toy and the ONE AND ONLY Law Tactical folder on my trunk/EDM setup…not trusting 💩 to a $25 chinesium part that could potentially be put in a position to protect my life, No thanks I’ll save up for a LAW Tac all day over this. I’m curious to see if there’s a follow up video to this, doubt it LOLOL

[@vegasranger]

I don't how some companies can justify up to $369 for a folding adapter? I'm with you. Found a seller on gun broker selling them for $35 for the same thing.

[@ConsensusX]

How is it working out for you so far? I'm about to buy one

[@vegasranger]

@@ConsensusX I haven't put it on yet but it seems good. The hinge is tight and not wobbly. The lock mechanism works good.

[@ConsensusX]

@@vegasranger Sweet, I just ordered one. I've been eyeballing the Sylvan Arms Gen 3 but the cheapest one is $130 on PSA (for a small aluminum hinge 🙄). All the aftermarket ones were removed from the Chinese shopping sites. Found them when I checked Gunbroker.

[@vegasranger]

@ConsensusX the one I ordered on gunbroker was Chinese but the guy selling them was in Canada. They're probably all made in China anyways

[@mgentile7]

there is a video out on the Aimaculate product and it totally s@cks !!!

[@randomness9158]

I got the BAOLYDA adapter. The button/ latch seems like it might need to be made of a better material. The buffer action seems to loosen up the latch. I looked up to see if that part can be replaced, no luck yet.

[@jvon0311]

Any update on reliability a year out? Something simple as still going or avoid 👍🏼

[@Gunny713]

Did you shoot with it yet? Updates?

[@210gunz]

SO WHAT IS THE NAME OF THE PRODUCT AND WHERE CAN I FIND IT?

[@Kingdom-rt7nr]

Bro awsome weapon...but where to buy the folding stock..or whats the name of the part.

[@democratpro]

PAY ATTENTION!

[@officalrooachbeatz7492]

@@democratpro 😂😂

[@FatgirlMickey]

I bought 4 of them for my ar 300 blackout pistols I own.

[@nebaker4]

Good looking out. imma order mine this weekend

[@crimsonhitman1719]

Where you get the hand gourd , most similar thing I could find is a 7.5 complete from veriforce tactical

[@Hwypatrol2]

Hi. What is the brand of that Hand Guard on that pistol? Thx

[@Smokkinboots919]

I was thinking abt getting the cooking cutter as well but thought maybe the gases would hit my light. Have you had any issues with that ? I love my Folding brace for the budget I had I couldn’t beat it.

[@Tuxxyboogie]

Sylvan arms...period

[@eastcoastflooring4624]

Want to tell us how it held up I had one I think it was like $40 I did change out the buffer retaining pen that came with it and used the one from law tactical I think it was like eight bucks but I ran close to 2000 rounds on that gun before the ring that holds the buffer tube started cracking

[@small-town-southern-man3573]

I recommend the LAW folding adapter…

[@calebsmith9917]

Note to everyone. Did research on website.. it’s not reliable, you may receive your package you may not. It seems to be a dropshipping site someone created where you purchase a product, then they order the product you want from a cheaper website, and send it to you.

[@rickkinnison9573]

Buffer tube: approx 2 1/2 turns in, acts like it’s trying to cross-thread.

[@brandtnicholson4532]

What was the solution? Mines doing the same thing

[@Mr_Ruhl]

I wouldn't run it. Sylvan at the least, Law is still the best.

[@flawless1up]

love my law tactical

[@One_of_Gods_Warriors]

I’m looking to build a sbr and that looks like a perfect truck gun

[@robl2720]

Those adapters with a SBA3 make the length of pull over the limit. Might as well put a stock on that bad boy.

[@yayanarchy8394]

Length of pull doesn't matter on the AR platform when determining whether it constitutes a pistol or SBR. What does matter? The area where the brace/stock makes contact with the shoulder as well as whether those contact points are a solid material. It's unclear, like everything the ATF does, exactly at which point this pile of sand becomes a heap of your dogs in your living room.

[@jameskozlowski5496]

Incorrect. LOP does matter. It has to be under 13.5inches at its longest position from trigger to end of brace. This adapter will put that over the limit and it now becomes an SBR. This is a very well known issue to the point that SB tactical now sells a 9 dollar "LOPL. Length of pull limiter that plugs the last one or two positions on the brace you have to keep it under the 13.5 limit to still be considered a pistol.

[@sigsauer505]

But u don't know if it works reliably cuz u said u don't really shoot it so how can you justify using as a self defense weapon. I agree if something that costs less works well get it but make sure u do some testing on it cuz honestly its part of the action of the gun. I really like the knock off sba3 that they sell on aliexpress for 16 dollars but it's also not part of the action. It happens to be exactly the same also I'll never spend 100 bucks on a real sba3 again u should check that out and also the knock off surefire lights. Then u can put ur money into the guns reliability. That's wat I do personally I cant justify spending 300 on a light or on a plastic stock or pistol brace wen they do the same for a fraction of the price but I don't risk it wen it comes to tha guns action

[@rueridge7597]

Mex

[@Mr_Ruhl]

Fr... Especially something that could fall apart while running it and send the carrier down your throat.

[@yayanarchy8394]

I don't see the big deal. Half the fighting people on this planet are running around with reliable weapons with far more questionable modifications and fixes. Aluminum manufacture is a very delicate process. The "v3 version" they're selling of this is some factory making a knock off of their knock off. The difference is easy to distinguish. You can just install it, unfold it and then try to twist the buffer tube away from the receiver in your hands. If it was going to break then you just broke it. If it doesn't break then you use it. In the direction we're going in this country we're probably going to be doing a whole lot more things like this since democrats are illiterate when it comes to an economy and lying when it comes to empathy.

[@user-lz7iv7ku2x]

Neils like superman truth justice and the american way

[@dannyj4743]

how long is that barrel? I want to do this with a psa marauder. thanks man!!

[@mitchellskaterjanes808]

They sell it on eBay now

[@gradymacthaloc5264]

What’s the name

[@neilhand4657]

I JUST TRADED FOR A DELTRON PISTOL AND LOVE HE FEEL OF IT ! HAVEN'T HAD TIME TO SHOOT IT YET .

[@albertobejarano2671]

Does the hinge rub on your face or body when aiming?

[@JLV86]

No sir, It has not gotten in the way at all

[@kentonsoufal6340]

Will the law tactical folder fit on a pistol buffer tube? Gonna buy one but worried the folding adapter will only fit a milspec buffer tube

[@markathena4730]

If I'm not mistaken, these are the only two items you'll need to get the law tactical folding stock to work, let's say, on something like a FX-9 but other pistol 9mm "AR" style guns may need different parts for the buffer tube to function properly and "marry" (fit) properly to the law tactical folding adapter. Law Tactical Folder $270 Sylvan Arms Folder BCG Adapter for FX-9 $25 Make sure to Google or do something like check with the manufacturer directly. A lot of businesses will respond to inquiries of this nature and steer you in exactly the correct direction. Also a lot of good videos (where I found the parts I just gave ) but they're getting harder to find for some reason.

[@PopeyeKF4LBG]

Tell us more about the barrel breakdown device... Nice build!

[@ryanarr569]

How’s the folding adapter holding up have you put more rounds through it

[@justinkroeker1464]

I’m all about certain cheap parts but that seems to be adding the weakest link and then you put you eye right by it. Not for me

[@yayanarchy8394]

Plenty of people are running around this world using parts replaced with bits of twisted wire they snipped off a barbed wire fence. If you want to know if it's good then you bash it against a tree a few times. If it works you're golden.

[@godovereverything2460]

Awesome my bro 💪🏼💪🏼💪🏼

[@stephenaddair]

I was half way to putting the folding adapter on my 300acc carbine till I saw a video about the the bolt extention causing problems

[@yayanarchy8394]

If extra weight on the bolt is problematic then a lighter buffer spring or lighter buffer weight would offset that imbalance. Aliexpress is a good source for those things, but make sure you read the reviews when ordering from China. I've never been burned from anyone on something with 3 or more reviews, but have when it was no reviews.

[@studentofthe556]

2yrs later…how’s it holding up?

[@B_r_u_c_e]

Thank you. Update video?

[@stephenaddair]

I got the china one and it seems to be made of good material and it was under $50 just im afraid it wont run subsonic in my 300acc

[@yayanarchy8394]

I'm about to order one as well for the same purpose. I don't think it should have any issue running from what I'm seeing. If there was though then either lighter buffer, lighter spring, or adjust your gas block, and boom, you're in business.

[@kentretzlaff2262]

Military overstock very reliable

[@larrymonus3605]

Nice set up, bet you're glad you did not spend much on the folding adapter, especially since the brace rule was released. You can't have anything extending the buffer tube or ATF will classify as a SBR

[@AlwaysAiming]

Do more research my boy. It is listed as a ALLOWED part.

[@Wizop]

If u are wanting and running 556/223 do not go under 10.3inch barrel. Anything less than that and ur velocity is less than 2400fps witch is what the bullet needs to have sufficient ballistics to fragment. Under that u just have a glorified 22. And the muzzle flash is just dumb and it also messes up the reliability.

[@yayanarchy8394]

No 5.56 rounds fragment unless you specifically purchased specialty fragmenting ammunition. M193 was the first bullet the military used and it tumbled when it struck a soft target. SS109/M855 "green tip" added a steel core for penetration, which changed the weight, which is the reason that the military changed to a different barrel twist rate in order to stabilize the bullet in flight. This one will penetrate a hard target, and will tumble regardless once it strikes a soft target. You're right though, if the round isn't moving quickly enough it doesn't do the damage it was engineered to do. If it's slow then a soft target doesn't cause the trajectory to become chaotic and it will just pass through in a straight line, carrying most of its energy with it instead of into the soft target.

[@Wizop]

@@yayanarchy8394 it’s it’s slower than 2400 fps ur 556 ain’t preforming and or fragmenting like it’s sposed to. Any barrel length under 10.3 is pointless because of that. Military don’t even use green tip anymore. Most branches use black hills 77gr otm cause in reality green tip is over hyped really. Ppl always saying it’s armor piercing when it’s far from lol. 55 gr out a 20inch barrel has more armor penetration cause of the higher velocity in the 32-3500fps at 55gr 20inch ar. My barrel length is ar pistol go 12.5. Best for self and practical defense. Ur “shtf” no law reccee build I go with 20. Max velocity and range.

[@yayanarchy8394]

@@Wizop Reread what I wrote. I told you that 5.56 doesn't currently, nor has it ever fragmented. I agreed with you about velocity. Velocity is critical for 5.56mm. The reason is velocity causes the stability of the projectile's flight path to critically fail and tumble. Fragmenting also works in the way you're describing, and for fundamentally the same reason I'm describing. But it's engineered to tumble, not to fragment.

[@Wizop]

@@yayanarchy8394 wait. U said 556 is engineered to tumble? Where have u read that lol. Maybe unless u get a specific tui round like I have in my 762 galil lol. But even those (762) don’t always tumble if ur using soft points or hollows for 762. Tui round will. Those come in different calibers now like 9mm too specifically to tumble on impact. I’ve never heard or read a 556 was sposed to tumble. Was sposed to fragment apart and make a bigger cavity and more wound tears from the bullet fragment. U lost me at the last sentence where u said they was engineered to tumble.

[@trilldawggy4544]

@@Wizop All spitzer projectile will begin to tumble and possibly bust/fragment when hitting soft targets. The tip weighs less than the rear...so the tip will slow down while the heavier rear whips around forward...and so on. Tumble hoss.

[@JordanRainey]

I can't get my action to work, something is blocking the BCG

[@k-pak6257]

Hopefully your meeting the length of pull requirements and your not walking around with an AOW.

[@TheREALLibertyOrDeath]

Shows you how dumb the current laws are

[@k-pak6257]

@@TheREALLibertyOrDeath Absolutely.

[@lylelyle7789]

Who makes the quick connect/disconnect 5.56 barrel for a AR pistol? That would be great to add.

[@JLV86]

Just search “Pantheon Arms Dolos Take-Down Kit”

[@lylelyle7789]

@@JLV86 I'm seeing it in multiple places for sale. But its not clear what to actually buy. It seems some Dolos kits come with more pieces than others. If I have a 7.5" AR 5.56 pistol from Palmetto State Armory.....what do I purchase to make my 7.5" barrel become a Dolos take-down barrel?

[@raymondpearson4268]

Optic planet has it

[@willystevenson7932]

FoldAr ar makes a folding ar. Barrel and stock. Can just buy uppers also.

[@yogybear75]

Hi this folding stock is a chinesse version not the sylvans arm or tactical law?

[@JLV86]

Correct

[@yogybear75]

Thanks 🙏👍

[@tonyfelix287]

I got one from wish, $22 bucks, it works as it should, no issues so far😬

[@straightcheez2892]

Did u pay 22$ for it.. I wanna try it but not sure if I can trust it. How many rounds have u used?

[@tonyfelix287]

@@straightcheez2892 about 300 so far, zero malfunctions, i mean, i know it will eventually fail due to the lack of quality control and what not, but i got it only out of curiosity to be honest, i’ll get a Sylvan Arms eventually.

[@testos2701]

Just tried the search but maybe miss pelled something is not coming up.

[@crypto_pinto2660]

Nice piece good video and you're probably tired of answering this question but what's the name of that muzzle device

[@JLV86]

It’s called the Cookie Cutter from Strike Industries.

[@J-Sizzle]

@@JLV86 you got a video on the cookie cutter?

[@JLV86]

Not yet

[@deadlead03]

What do you do with the buffer tube and spring tho?

[@SOSdoorgunner69]

good luck I can't find it

[@juansimon5802]

if it breaks no harm no foul? u just said its ur truck gun so if it fails it can get u killed.that aluminum piece of junk wont last for shit,my friend bought that knock off and it broke the 5th time out using it.they are expensive for a reason,not only are they made out of forged steel which is more costly to machine cause its harder it is engineered to very precise tolerances and its on the 4th version which is so good the military gave it 2 nsn numbers and its used by socom and jsoc so that should tell u the quality right there.if its a range toy then i agree with u but dont put shit on a gun that u are betting ur life on.

[@frankmartinez3366]

Any updates on the folding stock adapter? Still working good?

[@TheRealCardz]

Same question here as frank. Also, I googled that site and can’t find anything. If you’re still running the same part with no issues I want to snag one for most of my rifles right now just can’t find what you’re referring to.

[@louisdufour4106]

I love the handguard. Who makes it and where can I buy it? I'm building a 5 inch 300 and going with the folding stock . It's a perfect backpack SHTF gun. What is the part you were talking about to get the barrel to fold?

[@JLV86]

It’s made by Hardened arms, they went out of business. To find the part to remove the barrel, just search DOS ar15 barrel.

[@Joe_Goofball]

Can't access the site--pop up says it's not secure...

[@art4lumley]

It will fire a chambered round. Don't do it. It will mess your tool up.

[@goodwater2020]

Has this happened Authur?

[@PawneeNdN]

Ordered me one but its been a month and still waitn. Seems to be but I hope its worth the wait lol.

[@codynorris2649]

yep same here, I was even thinking I got scammed. Shipping label created after 5 weeks and still hasnt been received by UPS. Relieved to hear others in the same boat, misery loves company xD

[@PawneeNdN]

@@codynorris2649 literally just came in yesterday and I ordered it March 27. I've installed it and took it out today and its actually pretty good. Can't say it was worth the wait and money yet but first impressions shootn a few magazines im kind of impressed. But I was like you thinkn I got scammed so hopefully yurs will arrive soon.

[@codynorris2649]

@@PawneeNdN haha well thats good news for you then, but not so much for me, mine came in 2 days ago and couldnt even install the buffer tube it was defective so now to get a replacement they want videos and photos emailed to them... cheaper isnt always better lol shouldve just gotten a law haha

[@axeaces2330]

It's been 2 months and still haven't received the product 🥺

[@PawneeNdN]

@@codynorris2649 dammit man that suks. Mine is still holding up but won't give it the thumbs up until I have it for months and it stays intact. I'll probably eventually replace it with the law tactical but if it holds up till then, then I guess I lucked out.

[@nawfnate713]

My adaptor doesn’t fold unless I hold the bottom down could you help with a solution ?

[@trilldawggy4544]

Me too. 4th time building one, first time happening

[@just4thethrills]

Whats the muzze device on this build

[@joeygay7115]

Updates?

[@JLV86]

Trying to make a video soon, but have had zero issues

[@ethansabin6877]

So can you put a folding stock on a m&p 15 5.56 I’m confused cause what about the buffer tube

[@JLV86]

Yes you can, just has to be flipped back into position to be fired.

[@michaelhoffman9573]

I got the .556 pistol and I want one too lmaoooo

[@05_slowslivy76]

So ur saying it won’t shot while folded? Also it’s been a year or so since you posted the video any issues since folding adapter installed?

[@battalion151R]

Do not fire it with the stock folded! It will definitely make a mess of your day!

[@Dynallye]

I want this entire set up👌

[@yrichspirit2350]

Can’t find it

[@Myb899]

What model is the sight you have on it

[@JLV86]

I believe it’s the EoTech 512

[@klausblichtoten]

What’s a truck gun?

[@curtwebb3762]

What barrel length are running on that rig?

[@avglz]

its 30 USD on amazon

[@DUBC50]

What had stop is that ?

[@trilltayy8602]

Where can i get this brace

[@fifeohfarmingnstuff4416]

Tried to look up the Site, Its Blocked..

[@yelloduck02]

Did this require any modifications to make it fit and function properly? Or you just installed as is and it worked?

[@JLV86]

I just installed it and it worked, however the pin holding the buffer seems flimsy. I will probably be replacing it soon.

[@yelloduck02]

@@JLV86 have you searched the product recently? They're going for 80 bucks now. Is that the same one you got? I just wanna make sure I'm getting the right one

[@mrpolodowndakurocombatvet4869]

How long did it take for your order to be fulfilled?

[@JLV86]

I got it in about 2 1/2 weeks. Before all these mail delays.

[@axeaces2330]

Ordered 2 months ago still waiting

[@mrpolodowndakurocombatvet4869]

@@JLV86 any update, how does it function now?

[@mrpolodowndakurocombatvet4869]

Any updates for the device

[@edwincervantes6185]

Were can i find that upper?

[@B0N3ZNP3WZ]

Trevol to quest???

[@lm-usmc]

traveltoquest. I had a hard time understanding as well.

[@yoshi450gmail]

Any updates?

[@almaadams3631]

Bahahaha! Still not fuggin' illegal! FTATF!

[@eddiecrow9133]

How long is it folded?

[@SOSdoorgunner69]

you could just pull out your pistol and don't put anything together?😂

[@joshuavillalobos8218]

Nice review Cuzzin. I just ordered mine and decided to watch a review on it then what do you know. Hey I know that guy! lol

[@JLV86]

Haha, what up Cuz.

[@joshuavillalobos8218]

Good Stuff cuz. Keep em coming. Hopefully I can install it myself when it comes it lol. Looks easy but with my luck BAM spring goes flying never to be seen again 😂

[@JLV86]

@@joshuavillalobos8218 lol, Mine didn’t come with instructions, but if you need help tell my sister to give you my number.

[@joshuavillalobos8218]

Big 10-4 sounds Good!!

[@pep729]

I have no idea what web site you said bro. Something to quest?

[@BigBoss-rf1xu]

Same rewinded it it like 8 times n can't find it

[@chrisdenning2971]

@@BigBoss-rf1xu me either

[@JLV86]

It was “travel to quest”, looks like the site no longer exists

[@bellaphone5719]

bass ass cheers 🍻 brother

[@garyhill9516]

But once ..cry once!

[@joshuaseebohm64]

I guess the logic makes sense, but that thing is junk. Cheaper isn’t always better.

[@ajb6204]

Hey man how “legal” is that folding brace? I want to have the same set-up that you have, but I’ve been hearing a lot of mixed messages regarding its legality

[@vegasranger]

Totally legal for now. ATF trying to change rules effective in August. It's just a folding buffer tube adapter.

[@paulsturgill8848]

If your length of pull exceeds 13.5in with the brace extended, it might be frowned upon by alpha bet.

[@larrymonus3605]

Illegal as of the latest rulling 2023 on braces

[@shawnjacks2072]

What upper is that is it piston driven?

[@lanceelliott5812]

Anybody heard of the Titan Tactical folding stock adapter? It's $100 but I can't seem to find any reviews on it.

[@unmalo2768]

Don’t waste your money. I put my order in on April 17, 2021, they took my money and here are May 14, 2021 and I haven’t heard from them, I can’t get a status on my order and they don’t respond to my emails. There is no number to call on the website

[@lanceelliott5812]

@@unmalo2768 ok then. Thanks for the warning. I will avoid them.

[@revoltion2010]

@@unmalo2768 talk to your bank. I just went through the same thing and finally called my bank after over a month. Their email was disabled as well when I complained a second time

[@Taz3459]

If you guys want to run some Chinese crap on your AR feel free. For my money I’m going to buy American and actually get a good product. I don’t see why you feel the need to save 100 bucks and get an inferior product. Just my personal opinion I guess.

[@bellaphone5719]

thats not a personal opinion if it is you will keep to your self now thats my personal feelings

[@belligerentinstigator944]

Hey, go ahead and put "stock" in the title. good plan. so the gun grabbers can talk about it.

[@jiggidyjam]

How is that folder holding up?

[@studentofthe556]

This is the 15th time I’ve seen this question asked and everyone has gone unanswered…. it’s been two years, that’s enough time to make a follow up video