BUDGET NA MX5 Miata DIY Intake

I decided to make a cheap intake to replace the restrictive and ugly airbox. A butt dyno says I gained power but I will get a real dyno done later on and we can compare.

[@MrSohaibAhmad09]

Where did you get the plastic adapter piece ??

[@zaincars]

I found it on eBay search this up and you shoudl get something familiar: Air Flow Meter to 76mm Adapter for Mazda MX5 / Eunos Roadster 1.6l

[@Mobscure_]

Very good! Will be attempting this on my na soon

[@zaincars]

Go for it!

[@maplingx5927]

I did my dyi intake almost the exact same way, and I definitely notice some extra power especially around the 3k to 4k rpm range. Also for the noise I only hear it during i would say 75% to 100% throttle action.

[@zaincars]

I will be taking the car to the dyno once I decat it in a future video. I do want to see if the torque curve has changed from stock. Thanks for watching the video too :)

[@Saphiras_Wolf_Den]

Are you going to heat wrap the headers?

[@zaincars]

I was going to but doing some research, I found out that heat wrapping can lead to the headers corroding quicker.