Budget Overland Trailer Build Pt6 - MORE Storage + Full Size Shovel and Axe Mounts

In this video we are going to add some additional storage to the trailer that way we can easily access our essentials right where we need them, But first ill need to restore the flats by adding some gas struts, lockable latches and some new paint before we mount them. Then will also come up with some way to mount a full shovel and axe to make this camp trailer versatile. Stay tuned and find out where ill be mounting them.
let’s get to work. 👊🍻
Trailer Build Sheet:
Here are some readily available boxes I found at home depot on sale for 25 bucks I think are good candidates for replacement . Watertight too and also on Amazon: amzn.to/3aaViO9
Lockable hasp: amzn.to/3yHOX64
Weather stripping : amzn.to/3R8VWw9
Shovel & axe mounts: amzn.to/3ApVwvC
Tailgate lynch pins : amzn.to/3yf7YeY
Fuel Rotopax 1.75:
amzn.to/3uo9AlJ
Water Rotopax 1.75:
amzn.to/3JpcElX
Rotopax mounts:
amzn.to/3KqivZD
Cable locks:
amzn.to/3uxXt5T
5lb LP gas tank:
amzn.to/3DVm73a
12” SS clamps:
www.amazon.com...
Cinch straps:
amzn.to/3O1o2rK
Lpg to Colman camp stove adapter:
amzn.to/3v4M2l9
8” caster wheel:
amzn.to/3rctnCM
1.5 tube end caps:
amzn.to/3LM2g9k
Oversized M416 trailer fenders
compactcamping...
Lowe’s utility trailer and specs:
www.lowes.com/...
MC210 & MC169 max coupler articulation hitch:
www.cuoffroad....
2 30” 800lbs safety chains
26” bike Inner tube to sleeve chain
3/8 steel rod : handle and chain mounts
2k lbs trailer axel :
m.northerntool...
wheels and tires: jku take offs
trailer Jack:
amzn.to/3JdeHKe
trailer Jack mounts:
www.homedepot....
Tongue box:
www.harborfrei...
Tongue cut to 9ft:
10ft 2x3 .180 wall steel trailer tung
paint supplies
www.amazon.com...
trailer wire extension
amzn.to/338J5G5
wheels spacers
amzn.to/3GEqb7L
lug nuts
amzn.to/3ozJ7hX
locking Latches
www.amazon.com...
20ft 1 1/2” square tube .095 wall
20ft 1” square tube .120 wall
Lift gate gas struts:
www.amazon.com...
Body armor RTT
amzn.to/3ozXItC
Tail light light
amzn.to/3rxCIWd
Xbull recovery tracks:
amzn.to/3sP18dd
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video
Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
#overlandtrailerbuild #camptrailerbuild #offroadtrailerbuild
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission. Thank you

[@ATEMOFFROAD]

Here are some readily available boxes I found at home depot on sale for 25 bucks I think are good candidates for replacement . Watertight too and also on Amazon: enjoy the video yall 🍻 amzn.to/3aaViO9

[@davehatfield1456]

Not to be critical, this is just a suggestion. I would swap the boxes from left to right to put the lift struts toward the inside. 99% of the time you will be swinging whatever you lift out of the boxes toward the outside of the trailer. Especially since you will have to work around the tongue. This way the struts will be out of the way when using the boxes. I'd hate to see you break a strut mount since they are welded in. Nice build.

[@ATEMOFFROAD]

I thought about that just after I bolted them on and it’s a great idea, just need to swap them over now. Thanks for watching 🍻

[@billonbuilding284]

Really nice 👍

[@ATEMOFFROAD]

Thank you 🙏

[@ikoncoaching]

Love the build. Thanks for sharing. Considering something in the likeness and feeling inspired by yours.

[@fuoffroadandoutdoors1020]

The offroad trailer really came together nice,extra storage is always plus

[@ATEMOFFROAD]

Thanks buddy it’s been a fun little build, as a matter of a fact I’m camping in it right Now’ thanks again 🍻

[@brokenrockadventures]

Great build, attention to detail. Those fenders look massive..keep up the great work.

[@ATEMOFFROAD]

Thanks for watching I appreciate it 🍻

[@charlesstevenson5141]

Perfect of what I'm wanting to build on the 1,700lb harbor freight trailer. Want a full chuck box on one side, smoker on the other and enough space to carry our ground camping gear instead of a roof top. Just leave it on the stock tires since we don't go all to far. Just old back country roads here in Louisiana. If seals don't work on those boxes, just get a couple custom made bags like your roof top is covered with. Bungee them down.

[@ATEMOFFROAD]

Awesome , that should be a fun project, build it to make it comfort you and your needs. It’s the best way in my opinion. Thanks for watching 🍻

[@theamaturepro]

Asking us to tell you if the boxes clash felt like an episode of Blues Clues 😂

[@ATEMOFFROAD]

🤣🤣 that’s too good 👍🏼 🍻

[@NajarOffroad]

Those boxes fit perfectly! Great addition

[@ATEMOFFROAD]

Thanks buddy , just couldn’t throw them away after all these years. I’m glad I found a more permanent use! Thanks for watching 🍻

[@SAB1675H]

Awesome channel!! Great content! Also loved your “no rain anytime soon” in California, yet it was the wettest in 30+ years I’m in California also. Keep up the great work bro!!

[@ATEMOFFROAD]

Thanks buddy I appreciate it. Haha And yes CA has been getting a fair share of storms lately it’s great to see everything green and the lakes overflowing again. Can’t wait to get the trail up for a camp🍻

[@JessicaDiaz-ff4xd]

I like it

[@ATEMOFFROAD]

Thank you 🍻

[@Charlie_Paula]

Surfed on in from the (right coast) looking for some information from one of your previous vlogs for a SYE we installed on our 2004 TJ. Now Hubby and I can’t stop watching your other vlogs and we’re here to say thank you so much for taking the time to explain with detail every project you have accomplished. So appreciative we are! Stay safe out there on the Left coast, happy wheeling, and yes a big thumbs up, subscribed and rang the bell. Warmest Regards from Long Island…

[@ATEMOFFROAD]

That’s awesome welcome to the channel, some day we would love to make the trip to the east coast. Happy wheeling to you too and thanks for watching I appreciate it 🍻

[@timg0222]

Love the additional storage space. Those fenders are just screaming for some ammo boxes or metal tackle boxes attached to the as well. Can throw some spare nuts, bolts, washers and screws in them or bungee straps and extraction tools and straps. Or just food for your dog lol. Looks great Dustin, keep it going!

[@ATEMOFFROAD]

Thank you Tim, originally I wanted to put them on top of those fenders but that didn’t work out because they wouldn’t open the way I wanted to and would hang over the edge about an inch , just didn’t look right to me . But it’s a good idea , I did find some plastic waterproof boxes I may end up putting there. But good idea for sure. 🍻

[@bradsimpson8724]

I've found that mounting a sheath for a 21" chainsaw on my driver-side trailer fender is a real back- and time-saver. That said, I do a lot of forest trails early in the season before other guys have cleared them, so your mileage may vary, but I'd have a Stihl mounted there in a heartbeat.

[@gobybike99]

This is a great build. Really like the trailer and your videos. Keep it up. Wish I knew how to weld.

[@ATEMOFFROAD]

Thanks for watching, welding is something awesome to pick up and learn even as a hobby. I have a couple videos on here for beginner welding. 🍻

[@Ivansquarepants]

Man you got me wanting to build something like this great build!!!

[@ATEMOFFROAD]

Welcome to the channel thank you 🍻

[@whenwingsfail]

awesome build

[@ATEMOFFROAD]

Thank you 🍻

[@kevincollins5201]

Should switch the sides the boxes are on so the struts are in the middle to give you better access to the boxes

[@ATEMOFFROAD]

Good idea , thanks 🍻

[@AbandonedExplorationUrbex1979]

Awesome trailer.

[@ATEMOFFROAD]

Thank you🍻

[@long-jeep]

Nice work as always. 🇺🇲🇺🇲🇺🇲🇺🇲 Have you ever weighed the trailer fully loaded out at a truck scale?

[@ATEMOFFROAD]

Thank you buddy, I’d say I keep about 300 lbs of gear on the trailer since we last measured it. so I’m tugging about 1k lbs altogether. Jeep handles it well with 4:1 tc thanks for watching 🍻

[@jessejames9576]

Definitely interested in that video you asked about.

[@ATEMOFFROAD]

Awesome I’ll have to start working on that soon

[@JamesChoice]

someone is going to steal your axe and shovel... I would add some theft security.. Otherwise really like what you are doing..

[@ATEMOFFROAD]

I hope not , I should add a cable lock to those too. 🍻

[@tundraoutlander3488]

Now that you've had it for a while are you tired of cleaning the dust and dirt off your load.

[@ATEMOFFROAD]

The trailer washes down pretty easy, plus all my gear is contained in toats. That’s being said it’s no big deal 🍻

[@chrishessey9733]

Nice can you make me one?

[@tluva1020]

Plans for a rear hitch?

[@ATEMOFFROAD]

Yes just haven’t go to it yet but it is coming. Thanks for watching 🍻

[@lynnkrull8888]

Where is your generator

[@ATEMOFFROAD]

Currently I have 1 500wh generator and a 140w solar charger that pack in a tote in my trailer. Working on getting something larger with solar soon

[@arthurpineapplepen5209]

Very nice