Budget set but at what cost? The Airfix Fw190 starter set with a few... quirks...

  Рет қаралды 3,627

Cpt VFC

Cpt VFC

Күн бұрын

Airfix have been doing a run of these budget starter sets for a while now - normal kit but hugher numbers. Whilst I'm sure it helpe bring new customers to Airfix, is it worth the risk to quality control?
Join this channel to get access to perks:
/ @vfcproductions
Check out the Captain on Twitch!
/ cpt_vfc

Пікірлер: 46
@davidAB779
@davidAB779 9 ай бұрын
It was these starter sets in Aldi that got me back into the hobby after a 45 year break.
@VFCproductions
@VFCproductions 9 ай бұрын
That's amazing. So glad they worked!
@Ronno4691
@Ronno4691 9 ай бұрын
Same here. My very first Starter set Airfix Spitfire from Lidl got me back into the hobby (finally learning how to brush pain too)! I also had a stockpile of awesome untouched kits accumulated over the years that I've finally started 😅
@JamesG68
@JamesG68 Ай бұрын
Same here. It was the Yellowjacks Gnat from Lidl, and as my wife bought it, the stash that I have accumulated since is partially her fault.
@philbradshaw8053
@philbradshaw8053 9 ай бұрын
Really enjoyed this as I can't resist buying these whenever they're in Aldi/Lidl but had no idea they were specifically made or re-tooled just for sale in these stores, completely agree with binning the paints and glue (or at least storing them in a shoebox under the bed along with the rest of the crap), the brush is worth keeping, with a bit of patience they turn out to be be cracking little models, anyway thanks again 👍
@Dwarvious
@Dwarvious 9 ай бұрын
What’s wrong with using the tube of Poly Cement? It’s not yet failed me when I’ve needed it!
@VFCproductions
@VFCproductions 9 ай бұрын
I grew up on Revell Contacta - a precise cement that does the job. Going to a tube of wall filler is a bit of a jump in the wrong direction
@Dwarvious
@Dwarvious 9 ай бұрын
It’s hardly wall filler but I completely understand Revell Contacta being your preference, it is nice to have the precision!
@VFCproductions
@VFCproductions 9 ай бұрын
@@Dwarvious if it had a precision nozzle I'd be happy with it. A lot of KZbinrs hate it, whereas I just dislike it.
@MHMajid-yi8iu
@MHMajid-yi8iu 9 ай бұрын
I remembered when I'm starting this in 70s I can't get my hand on such Poly Cement. Our emporium selling Matchbox kits but not the cement, so I used Chinese made generic cement that bad idea and sometimes I'm using uhu glue😂......nowadays modellers are very lucky, a bunch of dedicated cement available on all kind of brand😊
@tomjw1306
@tomjw1306 9 ай бұрын
I remember tube cement from modelling in the 70s and early 80s. Horrendous stuff, and I hated it. It was a god send when liquid poly was invented. All liquid poly was good for was leaving finger prints melted into the model and it's clear parts 😂
@NickAndrewsFaulkner
@NickAndrewsFaulkner 9 ай бұрын
Not a bad little kit, I found some fit issues with the nose panels, but overall it went together well. My pitot tube survived, some of the gun barrels didn't!
@anrewbeal7369
@anrewbeal7369 9 ай бұрын
I built this a while ago had no fit issues, has regards painting the engine detail the fw 190 fan means it's not really visible anyway even in larger scales
@tomjw1306
@tomjw1306 9 ай бұрын
A great review as usual. Very entertaining...
@nheather
@nheather 9 ай бұрын
To be fair, I don’t think the faults that you pointed out, like the pitot tube and the engine are not peculiar to the starter set - they would be like that in the full model too. There are genuine simplifications in starter sets though, you mentioned one, a simpler set of decals, but sometimes there are parts removed. Two examples are the Sherman Firefly and Tiger I tanks which only come with the one piece tracks, the sprue that contains the detailed tracks is not included and unfortunately that sprue also includes some other detail parts - for example the Sherman lacks the front ledge, stowage and some pioneer tools.
@goforitpainting
@goforitpainting 9 ай бұрын
Have a great build. 🛩
@RichardMontgomeryYT
@RichardMontgomeryYT 9 ай бұрын
you said you never wash the sprues, but the one time i didn't because i thought "what diffference does it make?" my typhoon was so hard to paint.
@VFCproductions
@VFCproductions 9 ай бұрын
I don't know why I don't. I think I should
@ricardoroberto7054
@ricardoroberto7054 9 ай бұрын
Looks pretty good to me. At least it has a separate engine fan.
@jonbell3020
@jonbell3020 9 ай бұрын
What do you expect for 6 quid?!.. I’ve been back into it since lockdown and done most of these. No complaints from me, so much better than we had when I was a kid in the 70s.
@VFCproductions
@VFCproductions 9 ай бұрын
If a £6 kit is faulty and leads to a beginner giving up, then it was worthless to Airfix in the long term. If a £9 kit is exactly the same but fits properly, that person may then go back and buy more. With a lot of competition for a person's spare time, kit companies have to make sure an introduction to the hobby is a positive one. Telling a teenager '50 years ago we had worse' isn't going to cut it. Personally, I'll accept a £3 saving for a kit that may need more work, but that's because I'm already in too deep!
@jonbell3020
@jonbell3020 9 ай бұрын
What’s faulty?…I’m no Plasmo and mine went together fine.
@VFCproductions
@VFCproductions 9 ай бұрын
@@jonbell3020 The fuselage is noticably warped. I will highlight it during the building.
@MorrowindES17
@MorrowindES17 9 ай бұрын
hi Cpt Vfc great video love the fw190
@VFCproductions
@VFCproductions 9 ай бұрын
It is an impressive beast. I've made the Academy one before but that was years ago.
@typhoon2827
@typhoon2827 9 ай бұрын
I've built this and but for the usual bit of fettling here and there, you can't go wrong for £6 or whatever it was. Obvs the paint and glue went straight in the bin 😂
@j.4332
@j.4332 9 ай бұрын
I think theres too much snootiness in the modelling fraternity these days.Everything has to have the correct rivet sizes,and you must weather it god forbid.When most older people got into it,we just wanted basically a "toy" that you had the excitement of gluing together and then going out with your mates and running up the road making engine sounds and maching gun sounds.However,historical accuracy seems to fail.I see nowadays too many Luftwaffe aircraft made without swastikas on the tail fin.Its supposed to be FUN,not an exercise in being anally retentive.
@Chilly_Billy
@Chilly_Billy 9 ай бұрын
Agreed. The rivet counters really make me laugh in 1/72 scale. As for the lack of swastikas, it is illegal to display them in Germany and Austria. Perhaps other countries, I don't know. A stupid way to cancel history.
@fenrismodels
@fenrismodels 9 ай бұрын
Unfortunately, it's not a canceling of history. There are very real hate groups that still actively use the symbol and all its intended evil, which is more the reason why it's illegal to sell anything with that symbol on it in a number of countries. No one will forget what it is, what it looks like, or what it stood/stands for just because some plastic doesn't have it displayed.@@Chilly_Billy
@kennethjames9416
@kennethjames9416 9 ай бұрын
I have been building model kits for forty years and I don't use an airbrush or weather my models,I build for fun and I don't care if it's got raised or recessed panel lines,this is meant to be a hobby.If you are not having fun you are doing it wrong.
@crazylocha2515
@crazylocha2515 9 ай бұрын
Am surprised you didn't paint it in French colors 🤔
@Slycockney
@Slycockney 9 ай бұрын
I am forever cutting pilots legs off at the knees to get them in 🤣 That spinner swirl decal is a nightmare
@VFCproductions
@VFCproductions 9 ай бұрын
Other than Douglas Bader I'm pretty sure most pilots had legs...
@MorrowindES17
@MorrowindES17 9 ай бұрын
Oh the airfix me410 has two them swirl decals 🤣😅
@Slycockney
@Slycockney 9 ай бұрын
I have a whole family of very short pilots @@VFCproductions
@VFCproductions
@VFCproductions 9 ай бұрын
@@MorrowindES17 I now have the Me410... I'm going to knock back a few shots and then put the decals on...
@MorrowindES17
@MorrowindES17 9 ай бұрын
@@VFCproductions LOL am gonna practice on a FW190 before I make it.
@DiceandDungeons
@DiceandDungeons 9 ай бұрын
Really good work-I liked and subscribed. My channel's modeling has lately been planes and submarines :) so I appreciate!
@KABModels
@KABModels 9 ай бұрын
binfillers... lmao
@VFCproductions
@VFCproductions 9 ай бұрын
In my area we have the black bin for rubbish, blue bin for recycling, brown bin for garden wastes and green bin for Humbrol products...
@KABModels
@KABModels 9 ай бұрын
@@VFCproductions here in Liconshire, they dont give out wheelybins, they make you pile you black sacks on the road and then wonder why they have rat problems. I wonder where all the humbrol products go?
@jaws848
@jaws848 9 ай бұрын
The stand which is NOT. avaiable
@VFCproductions
@VFCproductions 9 ай бұрын
Good point. A bit shit, innit!
@jaws848
@jaws848 9 ай бұрын
No new video today?
@VFCproductions
@VFCproductions 9 ай бұрын
@@jaws848 subject to me finishing it - next video is scheduled for... Friday! I know, breaking my Sunday routine but there is a valid reason for it.
@jaws848
@jaws848 9 ай бұрын
@@VFCproductions no bother Was just wondering if you were okay.👍👍
Mad Mike’s models
8:42
Defiant Worx
Рет қаралды 507
Do you love Blackpink?🖤🩷
00:23
Karina
Рет қаралды 23 МЛН
How To Choose Mac N Cheese Date Night.. 🧀
00:58
Jojo Sim
Рет қаралды 114 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 31 МЛН
An almost perfect starter set? Unboxing & build review of the new Airfix Bf109F
16:44
Airfix PAINT Bristol Bloodhound *BRUSH ONLY* #RAF #176 #weathering
15:54
CT scale modelling UK
Рет қаралды 1,4 М.
OTD S1 E32
11:30
Older Than Dirt Modeling
Рет қаралды 7 М.
Henry VIII's 'Reject Queen': The Truth About Anne Of Cleves
14:39
History Exposé
Рет қаралды 1,7 МЛН
AIRFIX CURTISS TOMAHAWK  - what you get and how to build it!
27:49
How To: Airfix Starter Set- Aston Martin DB5
16:47
Airfix
Рет қаралды 11 М.
Do you love Blackpink?🖤🩷
00:23
Karina
Рет қаралды 23 МЛН