Budget Vs. Expensive! 6.5 Creedmoor Barrels PSA Vs. Proof Research

[@jBeaulieu051]

The pitting you see is actually just an optical illusion, its likely oil left behind with cotton from patches. The Proof Research barrel is cut rifled and then hand lapped while the PSA likely just button rifled. I've been with Proof for a few years now doing QC for a good majority of the Proof barrels after they been rifled and lapped. We strive for world class craftsmanship in not only finish but also groove and bore tolerances and consistency. Glad you liked our product!

[@Sheppard2030]

I don't know if I'll ever build a rifle, but being a fan of how mechanical things are constructed and operate, these are fantastic videos. Thank you, sir!

[@AlaskanBallistics]

I'm looking foward to the video where these two go head to head on paper with several types of ammo and 5 shot groups! The endoscope? down the barrel is awesome man!

[@jeffstevens156]

I didn’t watch this before I bought my 18” Arc barrel. I bought a Shaw which I have wanted one since forever. Their track record is phenomenal. It is also button rifled.

[@imperialwhovian3461]

I just finished my first 308 with a proof barrel and I haven’t even tried hand loads and it’s already shooting 3/4 with factory loads.

[@donniejoy4469]

beautiful barrel.. like a diamond set on a ring.. it makes the whole rifle perform to its best potential!

[@TheAcfallejoseph]

When I was in whitefish Montana driving along some snowy road a huge sign stood out to me. Proof, and I was like "holy shit". My coworkers had no idea why I was trippen about wanting to stop and go in. Pretty nice facility

[@badbilly429]

Love that hand lapped barrel think there will be a solid diff in accuracy in this build vs the psa

[@nateskate11]

badbilly429 That’s what I’m saying! You put accuracy up it will be apples and oranges. He mentions pitting on the PROOF barrel. I would put money that it is most likely oil and some fibers from a cloth.

[@Sanwizard1]

@@nateskate11 I saw something similar in my Proof 308 SS barrel with my endoscope, and it went away after a couple patches through it. After that, the inside looked like someone polished it to a high shine like a brand new car. I think cut barrells like the Proof, Bartlein, and Kreigers tend to shoot better, especially when hot. Less stress to the steel in the process.

[@camarokid518]

Kota,can you show us the barrel after the cleaning

[@carter.2232]

Interested in seeing the Proof barrel with bore scope after being shot. Enjoy the videos!

[@tacticalcoffee7397]

id like to see the bca barrel with the bore scope. you got me curious :)

[@kevinc9416]

Criterion or Proof stainless 18 inch for 308?

[@johnmckinney1493]

Love this series, I just got the parts for my 6.5 build. Db10 complete upper with a 20in fluted stainless barrel. Db lower but unnamed ar parts. Keep up the great work.

[@ringneck7500]

How many rounds does it have? Any barrel change

[@crazyz24cavy]

Can you give more specifics on the borescope please like brand and model. Thank you!

[@racer14glr91]

Do you have any experience with Wilson Combat 6.5cm barrels?

[@jeffstevens156]

I do have a question since You’ve asked. I thought copper was Our enemy, but my question is how much magnification does the bore scope have because I though You passed a hair at the front that looked like a cable. Also the striations that we’ve seen are minuscule if people think that they are going to ruin the accuracy. Keep up the good work my friend, You are an inspiration to Us and a haven, even if for a few minutes, to get Our minds off the crap going on around Us. Thank You!

[@-maccabee]

if u wanna watch 6mins of the video to find out how much this guy like stickers, this video is for you

[@thomaslapointe4671]

Awesome Content Brother Thank You for your Service,

[@bubbasmith2424]

Awesome info KB32, don't want to steal your thunder !!! Having prob getting an item from PSA to my ffl, which happens to be bass pro ......not like it's an uncommon FFL. Thx KB32, continue to roll..... awesome !

[@Xandrosi]

What I have no sense for is the difference in tolerances and steel. While it was flat-out cool to see the differences in horizontal chatter and in-line tooling marks in the lands and groves, once both barrels have a copper patina, doesn't it then come down to how precisely the bullet travels down each barrel? Unlike the AR build you did, both of these barrels seem to be comparably beefy. However, if they're made of different kinds of steel, then the harmonics will probably be different. How comparable are they please?

[@308guy8]

Do you think breaking a barrel in helps ive done it both ways and what ive found out is that you either have a shooter or you dont

[@craesh1001]

308 guy AMEN to that. It either shoots good or it doesn’t no matter what!

[@talkingrock7011]

Some barrels shoot better with fouling

[@ShinobiHOG]

Do Proof barrels come with a barrel nut?

[@legarmaniac402]

Bear Creek Arsenal has a 24" Creedmore barrel for sale. Thought you should know because it would put a budget barrel on the PSA in the same size as the proof barrel.

[@kotaboy32]

I wanted to mix it up a bit

[@legarmaniac402]

@@kotaboy32 I just know that you had entertained the idea of a 24" barrel but couldn't find one and got excited because I found one. 20" is 4" longer than anything I own and 25 meters is the furthest I shot.

[@kotaboy32]

@@legarmaniac402 I got the 24 inch and it is sweet

[@stever4651]

That was really neat.....For some reason I thought that Proof Barrels where around $800 mark....That's one great looking barrel...👍🇺🇸

[@skizilla]

Does anyone know if Proof dimples their barrels for gas blocks?

[@joecoopersimpactkarate5708]

My PSA Gen 3 gets .5 moa all day with factory Hornady 140 ELD. Gets 1,000' 10" plate if I do my job pretty easy. Just bangs the hell out of the brass though. Can't have everything...I guess

[@justaregularguy3827]

what bore camera is that i need that mirror AND camera setup for personal use

[@cryptkeeper4727]

How much difference is there in accuracy between the two barrels?

[@justa3v619]

now I want a bore scope so I can compare all my barrels lol

[@bubbanater1984]

Do you have a link for that teslong borescope

[@ModernSurvivalSense]

Why does a $500 barrel have pits in it?

[@mandh14]

Microscopic pits are in all metal surfaces, you'd barely notice those imperfections with the naked eye. The endo light source really highlights pits.

[@Mmyers1177]

I agree, the Palmetto barrel looks like better quality, and the accuracy was very good with it as well! I don’t believe I’ve ever seen a super match grade barrel that’s been hand lapped have those huge pits! I would send that FKR back or get a refund!

[@andreweff8149]

It doesn't have pits, as a guy that has looked down a lot of barrels, that is oil in the barrel that hasn't had a patch run through it. Push a single dry patch down that barrel and show a bore scope video again.

[@billbee235]

You get what you pay for. Proof barrels hammer. I run a 24 inch Criterion from Fulton Armory and it’s sub MOA all the way out to 700 yards so far

[@steffeness1]

How much?

[@johngalt4769]

I glued the mirror on the teslong because it pivots to easy.

[@kotaboy32]

There's a tightening nut to stop that from happening

[@johngalt4769]

@@kotaboy32 thanks. maybe I should get glasses. Cant believe I overlooked that. Stay safe and healthy!

[@ecleveland1]

Can you provide a link to the borescope you are using?

[@kotaboy32]

I'll be doing a full review this weekend.

[@talkingrock7011]

A barrel to barrel unfired comparison would have been better , I bought a air gaged Douglas stainless for a 300 Win/Mag that was flawless for $370.00 which was as good as the Proof that was within.0001 fore to aft

[@kotaboy32]

No argument there, Douglas makes amazing barrels, have two of them and they print inside a dime

[@brockedandloaded6034]

Awesome video man! Be careful with setting the end of the barrel down on the table when you showed the feed ramps and chamber trying to get it to focus. You can easily damage the crown and it will effect accuracy from what Tiborasaurus says. I know it's hard to remember but I try to never let the end of my barrel touch the floor or hard stuff. He says even micro dents and scratches in the crown can make a difference in precision rifles. The crown is the last part of the barrel the round touches when exiting, and it needs to be completely uniform. Anyway, just wasn't sure if you were aware. Sorry if you do. That endoscope thing is awesome!

[@TexasTrained]

Looking at your $479.00 PROOF barrel beside the PSA Upper& Barrel..My Question is how FAIR do you think it will be with the two barrels not being the same Length..We know Longer Barrels have the Advantage and the Rifle length Gas System damn sure does not kick as hard. That is a nice EndoScope..Where did you buy it? Id like to get one.

[@kotaboy32]

That's why it is a budget vs. expensive. It's what I got

[@TexasTrained]

@@kotaboy32 that's kinda like racing a Volkswagon against a Dragster.

[@TexasTrained]

@@kotaboy32 it should be on equal footing but it may not matter.It may turn out like last time with Econ One kicking Full Monty's ass .lol

[@kotaboy32]

@@TexasTrained Mustang vs. Mercedes AMG

[@kotaboy32]

@@TexasTrained well see

[@Mmyers1177]

Kota, those Huge Pits are not normal in a Super Match Grade Barrel man! You been robbed I’d send that thing back! I bet you the Palmetto barrel is far more accurate and consistent my friend over time.......

[@andreweff8149]

I'd really like Kota to push a clean dry patch down the barrel and re inspect it. That looks like oil that is intentionally left in the barrel when it leaves the factory. I've seen that a hundred times and it looks weird in a bore scope, but it wipes right out.

[@JayNoQuarterReagan]

How can people balk at quality?! I've had BA 308 and hit .5 moa and thats even a high end build I did. But for 6.5 CM I'm going proof barrel with JP silent capture spring and a variable mass system. Youre gonna pay a steep amount for quality and reliability. When it comes to those two I'll save no expense. Espeically when it comes to SHTF kind of scenarios.

[@dustinbubb6789]

Isn’t amazing on how gun barrels are made the same specks same metal then some manufacturers say my barrel is better so I’m slapping 1000 dollar price tag on it but it’s still made the same as a 100 dollar barrel lol

[@eltenda]

Very interesting as usual

[@jerryjohnsonii4181]

Very Cool barrel Kotaboy32 !!!!!!!!!!!!

[@scottf.3808]

Love the info as nice barrel.....Good stuff....

[@donaldheine6243]

Hope they shoot better than the 5.56. To be honest I was disappointed in those builds. I didn't like how either one was shooting.

[@PopsQuest]

Optics Planet is my favorite place to shop

[@kotaboy32]

Lol

[@jayy15x]

Just wish their shipping was a little faster, but yeah.

[@steffeness1]

@@kotaboy32 What outfit do you recommend I use to replace the Scar-17S / .308 / 16" barrel with a 6.5 creedmoor 20" barrel?

[@mr.j5919]

I’ve gotta tell ya I’m not too impressed with proof after looking at both I actually think the PSA looked a little better even though it was dirty

[@JerrBearTactical]

Great stuff as usual can't wait for the next episode ... 👍🇺🇸🤪💥

[@keithplymale2374]

Kota that was almost an unfair comparison because the PSA barrel was not clean and new IMHO.

[@Mrgunsngear]

two stickers!!! Now that's impressive 😎

[@justa3v619]

Proof better hope this video goes well lol. Better hope that PSA doesn't put it in its place.

[@justa3v619]

honestly anything more than 1/2 moa out of a 500$ barrel Id be upset

[@z50com]

at 1000 yards 4" extra inches of barrel might be a slight advantage! at 300 yards not so much so, but at 1000 I'm sure we're talking about a few inches more drop with the shorter barrel. . .This contest is rigged ~ LOL

[@Jesusprayerwarriorbw]

Thx for sharing your love with the pew pew community

[@Dirtbillys]

Would like to see Iraq veteran 8888 melt down on that barrel!

[@whiteman3075]

Proof is cut rifle double hand lap

[@jasonjackson329]

Dang Kota. Would you please send me one of those stickers? Please. Collecting stickers to put on my safe. And can’t afford a proof barrel. But a sticker would be cool

[@alant5757]

“What the heck is that”.....? Looked like a red whisker to me.

[@kotaboy32]

Lol, probably

[@mds19238]

Too much chatty kathy.

[@Mrgunsngear]

two stickers!!! Now that's impressive 😎

[@Mrgunsngear]

two stickers!!! Now that's impressive 😎