Buick Enclave engine mount symptoms and replacement 2012 3.6

Engine Motor Transmission Mount Kit amzn.to/3Xov68B
Front Engine Mount amzn.to/4dFOLGu
check out the link below to our amazon store for items or products used in our videos
www.amazon.com...
this video shows how to replace a front engine mount on a Buick Enclave 2012 2013 2014 2015
Customer complaint was harsh engagements and a harsh shift between 2nd and 3rd gear
this is a 3.6 engine
Motor mount
Some other actions with a bad engine mount could be noises such as banging , rattling , jerking , in the front end of the car also problems with the cv axles or even exhaust can be broken do to more than normal movement also hoses can move more than normal and can cause leaking and in extreme cases where the mount was not replaced in time you might have wiring problems do to more than normal movement also you could notice vibrations or shaking that can come and go with different speeds it is a good practice to have all mounts engine and transmission checked once a year. 2008 2009 2010 2011 #mechanic #automobile #automotive
As an Amazon affiliate I earn from qualifying purchases at no extra cost to you

[@eviebey]

My engine on Buick Enclave doesn’t move at all yet the mechanic is telling it needs all 3 mounts changed.

[@angelf9800]

How did you put on the top bolt on the bracket I am having a hard time, I can’t see where it goes

[@usernamesrlamo]

It’s all feel brother. It’s right below and behind the oil filter, you just have to feel it out and guide a socket in there.

[@CrazyRFGuy]

@@usernamesrlamo Is this why you pull the oil filter? I have not started on mine. Mechanic said the wishbone mount was broke. The car didnt act like this before we had them replace the water pump.

[@usernamesrlamo]

I pulled the oil filter because I was replacing the starter and removing the oil filter made it easier to get to the top bolts on the starter and the top bolt (the one you can’t see) on the mount bracket. I replaced the water pump before as well and you don’t have to take the mount or wishbone bracket off to do that job. The water pump is over on the far passenger side of the engine and you get to it by snaking up the narrow passage where the serpentine belt is. I don’t see how the wishbone mount would have been broken when replacing the water pump.

[@williamemery732]

That's a front mount