Build a Farmhouse End Table for $32

In this video I create a beautiful farmhouse style end table made out of regular construction lumber that you can find at any big box hardware store. This is a great video for anyone looking to make some great looking, low cost furniture, or for any woodworking business looking for popular, high margin items.
Instagram:
www.instagram....
www.tiktok.com...
Equipment & Tools:
Dewalt Job Site Table Saw: amzn.to/3kyOBYU
Dewalt Planer: amzn.to/3itC6en
Bosch Benchtop Router Table: amzn.to/3ik9vIA
Makita Router: amzn.to/36OKxvs
Craftsman Air Compressor Set: amzn.to/3kz3zhv
Countersink Drill Bits: amzn.to/3BuBE8G
Titebond III Wood Glue: amzn.to/3BiUyzc
Titebond Original: amzn.to/3iqjBYp
DeWalt Clamps: amzn.to/3BiC5Ti
DeWalt 20v Cordless Drill Set: amzn.to/36Oe9ck
Bessey 18” Parallel Clamps: amzn.to/3hOmdjC
Bora 40” Parallel Clamps: amzn.to/3itiGq6
DeWalt 5” Orbital Sander: amzn.to/3hNIdLt
Abranet Sanding Discs: amzn.to/3rjeOMz
Stanley 2.15” Thick Storage Container: amzn.to/2W0MfrB
Stanley 4.5” Thick Storage Container: amzn.to/3hVFcZX
13-Piece Spade Drill Bit Set: amzn.to/2UlBT5g
Kreg Pocket Hole Jig: amzn.to/3kAjUmg
Rubio Monocoat (original): amzn.to/3Bn0HKw
Rubio Monocoat (walnut): amzn.to/2UiMbDb
Dust Collection:
POWERTEC Downdraft Panels: amzn.to/2V055hR
Dust Right Small Port Hose Kit: amzn.to/3kBnAUK
Dust Right 4” Quick Change Set: amzn.to/3zhAueu
Powertec 4” Blast Gate: amzn.to/2VQbQDo
Powermatic 20” 2-micron Filter Canister: amzn.to/36K5Caz
Camera and Lighting Accessories:
HAITENT phone 86” Tripod Stand: amzn.to/3xV26pF
PHOPIK Softbox Lighting Kit: amzn.to/3zjz5o1
Music Credits:
Damtaro - Nothing
Infraction - Training Day
Infraction - Sport Rock Music
INOSSI - Back to You
Alex Bradfield - Free Range

[@ericpetitclerc5519]

Always clamp when adding pocket hole screws! It prevents the wood from shifting! Friendly instruction!

[@EigenDesigns]

Great tip Eric, thanks. 😀

[@Daniel-li1jt]

Nice build. I use my trash cans for a work bench sometimes too.

[@EigenDesigns]

Hey, they get the job done! :)

[@somogyiantal8516]

Nice job !! How long are the side members if you don’t mind ?

[@jimmystrain883]

Really enjoyed the video very informative 👍

[@billpaterson9046]

Have you had a tabletop split- had one do that- now I use figure 8 clips to hold the top down to the base.

[@anthonyfusco9768]

cool table. i do have lots of 2x4 in my shop. would you have a cut list?

[@AngieD300]

this has been the table build I've liked the most...and I've seen 100's of farm table videos. the instructions seem straight forward, but would you by chance have the plans available for purchase? If anything, exactly what is the length of the 2x4 and 1x6? I'll go through the video again, in case I've missed it...lol...Thanks for sharing.

[@EigenDesigns]

Hey Angela! Thanks for the kind words. Check out the video at 1:08 as that's where I have all my dimensions. If that doesn't help answer your question then let me know.

[@AngieD300]

Thank you!! Can’t wait to start this…my first table, and I’m afraid I’m being too ambitious with this one…seriously nice table and great work!!

[@EigenDesigns]

@@AngieD300 never think like that. Mistakes are how we learn and improve so never be afraid to try a new project. Here is a tip that might help you on your first table. Since you are are going to be painting the legs, your joints and seams don't have to be perfect. If you have a small gap in any of the connections just used some paintable silicon caulk to fill the gaps (using it almost like a wood putty) and then do a light sanding before you paint over it. It will make your work look near perfect when you're done. Good luck! Once you finish it, tag me on Instagram so that I can see your work :)

[@AngieD300]

@@EigenDesigns I really appreciate that tip about the silicone caulk. Definitely feel better about “learning from the mistakes”. I will definitely tag and share once it’s completed!! Thank you!!

[@vshakir622]

​@@AngieD300how did your table turn out?!

[@vanlippencott7374]

Do you have plans for a farmhouse dinner table

[@EigenDesigns]

Hey Van, I have built a farmhouse dinner table but I never developed plans for it. There are a few pictures that I posted on my instagram acocunt (one of the earlier posts) if you want to see a picture of what it looked like.

[@asahi6965]

Can you please tell me the thickness of all the pieces? 🙏🏾

[@rossimagery]

Beautifully done product AND project... *BUT* background music shouldn't be so damned loud that your audience can't focus on your speaking. There are millions of people who cannot deal with such extreme distractions. Thank you for your video, and I hope this comment is received in the helpful manner that it is intended - Edit after reading some comments, and your replies: You seem a very helpful, kind, and giving person - and also very encouraging! Thank you for being you, kind sir.

[@Smallbarnworkshop]

👍