Build a knife making Forge Out of a Propane Cylinder

A complete step by step forge build that based on the Gameco Artisan supplies kit. This video will also be invaluable to anyone building a forge from scratch. Perfect for the total novice and the experienced fabricator alike.
FIND US AT
/ murrill_and. .
/ murrillandson
Products and site www.tobyfireandsteel.com
Email [e-mail]
Kit supplied by www.artisansupplies.com.au
Music provided by www.Bensound.com

[@АлександраПанова-и3щ]

Классная экспозиция получилась для накала железа ! Браво !

[@rlm98253]

This video tells you absolutely everything you need to know to successfully build a home forge. Well done, sir.

[@TobyFireandSteel]

Thanks so much mate 👍 glad it was helpful

[@dalrden6065]

Boy am I glad I found your video, I'm just starting to build mine and you have answered a lot of my questions. thanks mate, much appreciated and a great job.

[@TobyFireandSteel]

Not a problem mate super glad I could help

[@gregberrell9654]

great resource for anyone wanting to build one of these and agree that the gameco kit is awesome. well done.

[@TobyFireandSteel]

Thanks so much mate. Feel free to share with anyone building one.

[@DavidStanton]

Hi Toby. Great to see the whole process from start to first burn!

[@TobyFireandSteel]

Thanks Dave I was trying to make so anyone regardless of experience could follow along.

[@castledomeknives9395]

Great craftsmanship...atart RIGHT ...END RIGHT! AWESOME JOB

[@TobyFireandSteel]

Thanks mate I appreciate that. And that's so true.

[@michaelwhalen1907]

I have a suggestion. For those who don't have a welder. Drill 4 holes in bottom of tank for legs. Then use long thick bolts with a nut on the underneath to keep them in place. quick and easy no welding required. You will have to skip the plates on the front but that shouldn't be a big deal.

[@TobyFireandSteel]

It's not a bad Idea bud cheers. But how do you weld the burners in or weld the 2 halves of the cylinder back together. It would really need to be a full redesign. Unfortunately to be done well we'll this one requires a welder. Though I've definitely seen forges of a different style that dont 👍🏼

[@Sweyin420]

​@TobyFireandSteel you don't, the top would be the lid and as far as the burner goes its basically a propane torch stuck into the side. There's an excellent video on it and you can actually hear the guy explaining everything when he's making it 😅

[@robduncan4937]

Best DIY forge video I've found on KZbin - just what I was looking for! Thanks Toby

[@TobyFireandSteel]

Awesome thanks heaps Rob, good luck with the build mate 🤘

[@sirblacksmith2297]

You've earned my subscription and I'm not even past the intro

[@TobyFireandSteel]

Thanks heaps. Much appreciated

[@joshrhoades7034]

Very nice! Beautiful family sir!

[@TobyFireandSteel]

Thank you mate

[@rajhooblal5455]

Thanks Tobi, appreciate this. Greetings from Durban South Africa.

[@TobyFireandSteel]

No problem mate. Thanks for watching

[@LCantwell]

Exactly what I've been looking for..... Thanks for all the great advice

[@TobyFireandSteel]

Not a problem man thanks heaps for watching

[@dazwalker5127]

very nice toby, pretty much the same size build as im currently doing so mega helpful, cheers

[@TobyFireandSteel]

Brilliant thanks very much Daz, good luck with the build 👍🏼

[@Noelofvan685034]

Nice build, some pretty handy info there.

[@TobyFireandSteel]

Thanks Noel really appreciate the feedback

[@adamcockburn665]

Nicely done mate. Watched from start to finish and will probably do my forge in a very similar way. Thanks for doing this video.

[@TobyFireandSteel]

Absolutely no problem thanks heaps bud

[@Samoan_D]

Well done guy with the bad ass Hawaiian Spear Tat.. excellent forge mate.. ty for the share..

[@TobyFireandSteel]

My pleasure brother. I really appreciate that.

[@denisebentley8036]

Brilliant video, as l am in the process of building a forge myself, l have taken your advice on, thankyou for sharing an awesome video

[@TobyFireandSteel]

Thanks Denise it's a lot of fun. Glad to help.

[@lukefindlay4651]

Very good description. You got my subscription. Refreshing to see aussies doing this and using millimeters. I’ll be making this one . Cheers mate !

[@TobyFireandSteel]

Awesome cheers brother 👍

[@lukefindlay4651]

How easy or difficult would it be to apply a hinged door, would a hinged door lose heat? Reason I ask is, what happens when you need to replace the insulation? Or would it never need to be replaced? If it does how many really hot burns would you get Out of the gameco kit you bought?

[@TobyFireandSteel]

Yeah luke its definitely an option. You can also weld lugs on each side and bolt the two parts together. I decided not to as for the 2 minutes it will take to cut the welds the one occasion in 5 years that the insulation needs replacing its not worth it to me. As for use time I really couldn't tell you burn times but I'd say 1000's I know guys you use them frequently and are 5 years in. Its really more about hours of use. If you're using for 5 hours a day, several days a week it will probably only last 2 or 3 years. Maybe less.

[@robertoesposito9081]

I forgot, greetings from the south of Italy ;-)

[@rodneykirby3109]

Spot on Toby, I just ordered my kit today.

[@TobyFireandSteel]

Awesome Rodney have fun bud 👍

[@rendel5024]

Nice job, I have an old air compressor I am wanting to do this with, got a burner given to me, and parts from Gameco, holidays coming up, would like to complete this project while away from work. Cheers, keep the videos coming.

[@TobyFireandSteel]

To easy mate 2 or 3 good days should do it. Get stuck in mate. Bit it may he better starting off with 9kg gas bottle if you have to gameco kit.

[@ryankilleen8243]

Thanks for the video Toby, some good ideas for me to use this weekend.

[@TobyFireandSteel]

Great have you started building your forge yet?

[@ryankilleen8243]

Not yet kit is on order and have a bottle in the shed ready to start cutting up.

[@TobyFireandSteel]

@@ryankilleen8243 yeah bud have fun.

[@hotkey180]

Gday I've just come across your channel and I just got myself a welder and. I would love to make myself one of these too!! If ok with you I be watching this video and asking for help? And please help With my welder what is 2t and 5t mean on my welder I'm starting to lean with glassless I'm ok but have problems with tacking 2by2by10mm square tubing sorry if I'm sounding like a idiot with the spuare tubing. And thank you for your time i be watching most of this on Saturday take care.

[@yvesdesrosiers2396]

Thanks for sharing mate. Appreciate the hard work. Cheers

[@TobyFireandSteel]

Thanks very much Yves hard but I enjoy it.

[@rosswiddison6699]

Well done Toby, got some good ideas mate. Building mine right now

[@TobyFireandSteel]

Thanks heaps Ross. Good luck mate. Ask if you need any any help bud

[@rosswiddison6699]

Just wondering Toby, the flat steel you welded around the entrance, how has it held up mate. Has it started to warp because of heat. I'm about to do this area and am thinking of putting some cut fire brick on the inside of it to help insulate the metal.

[@TobyFireandSteel]

@@rosswiddison6699 heya mate yeah I think because its thick it has lasted really well when I stick a fire brick in front of it to close it off a bit it glows red and has obviously go no paint now. But it's been a couple of years now and still going strong bud

[@prospectvic]

That's insane, thx heaps for sharing the build

[@TobyFireandSteel]

Awesome, great feedback thanks heaps mate 👍

[@rupertrussell1]

I would recommend filling the cylinder with water and then empty it before you start working on it with any hot work. That way you know there is no LPG left in the cylinder and it will not explode on you when you cut into it.

[@TobyFireandSteel]

So true mate I agree totally. I say it at 7:14 but should have been before any grinding. Thanks for watching Rupert

[@burlshepherd44]

Awesome video dude

[@TobyFireandSteel]

Thanks mate 👍

[@scooterdadyo8700]

Your pipe stack is huge. I would change the overall length of the riser you have. The cart is awesome.

[@TheDishDoc]

Great video mate. I've gleaned some ideas for my build. Did you put refractory on the sides and top as well?

[@TobyFireandSteel]

Thanks mate no I didn't but it is good idea to do so though

[@notthatdigusted7468]

Basically cutting the propane tank with an angle grinder is as simple as carving a metal pumpkin.

[@EZ-df1cm]

Toby, don’t look now but I THINK THERE’S A MAN UNDER THE TABLE!!! :o

[@TobyFireandSteel]

Haha u got me. Where abouts on the time line?

[@apriliaric]

great video mate...have subbed...loved the commentary as you worked ...

[@TobyFireandSteel]

Thanks Ric glad its helpful. Thanks for the sub

[@garymeechan9457]

That gives me a great plan for making my own, and I have also subscribed nice one.

[@TobyFireandSteel]

Cheers bud let me know If you need any advice. 👍😉

[@craiglsu72]

Great job! Looks awesome!

[@TobyFireandSteel]

Geez thanks heaps Craig

[@EvelioPerez]

Great job dude!

[@TobyFireandSteel]

Thank you bud 👍

[@lenblacksmith8559]

Toby when can you do more video's of how this forge goes and some forging with it and the burner??

[@TobyFireandSteel]

Been a bit busy lately mate but I do need to get in it soon. Thanks for the reminder.

[@lenblacksmith8559]

@@TobyFireandSteel No worries mate.

[@thenickfoxx]

those tons have seen better days haha

[@TobyFireandSteel]

Lol yeah some of the first I owned lol. Have probably got 50+ sets now days

[@lenblacksmith8559]

Thanks Toby, I have only seen one more Aussie building the Gameco type forge, I have just ordered the large burner, and see hot it goes, have the smaller one at the moment, goes ok but need more heat. Would love it if you show some forging with this forge and let us know how it goes and what you think of it??

[@TobyFireandSteel]

Great suggestion I'll do that. Thanks very much for taking the time to comment.

[@lenblacksmith8559]

@@TobyFireandSteel My pleasure mate, been asking Gameco for over a year now, to do more video's on their burners, I have only seen one really, the other was in the forge but more on heat treating. I am even thinking of doing a video of my small burner and when I get the big one, I think Aussie blokes would love to see how these burners perform.

[@TobyFireandSteel]

Yeah Len you should mate.

[@lenblacksmith8559]

@@TobyFireandSteel Yeah think I will cheers mate.

[@robertoesposito9081]

Hi Toby, many thanks for your video. I have some questions: following other youtubers I noticed they put concrete everywhere, why don't you make the same? The last question what's the name of the blue liquid you spray before the concrete? Thank you for sharing

[@vi683a]

I would suggest using two 1" blankets as opposed to one 2" blanket: The inner most 1" blanket will be sacrificial and easily replaced, as well as having a hinged lid for easy access!

[@TobyFireandSteel]

Thanks mate. The blanket came as a kit. Cheers for watching bud

[@vi683a]

@@TobyFireandSteel I really enjoyed your work. Sorry i didn't express that earlier but the wife was a yelling for me lol

[@TobyFireandSteel]

@@vi683a hahaha to easy mate thanks heaps for your suggestion to

[@woodstockxx]

Beautiful job mate..a crappy entry level forge is about 200 notes here in the U.K..something like yours would easily cost 350-450. I’m seriously thinking about giving this a shot & saving a packet in the process..thanks dude 👍

[@TobyFireandSteel]

Thanks heaps bud. Yeah ok thats an interesting. I hadn't really looked into forge prices in the UK. Im coincidentally moving back to the UK next week so I'm glad I'm bringing it lol. Thanks 👍

[@woodstockxx]

Toby, Fire and Steel - oh my..what the hell are you coming back to this shit hole for ?! .. I should be living in northern NZ in a log cabin on an acre of land beside the Maori reservation in which my pals live..but the bloody missus decided that she no longer wanted to go..AAAARGH ! .. good to see an intelligent, white, skilled migrant for once though..hardly what we’re seeing over recent months..be great to see more guys like you coming here/back here..I’m happy to stick the kettle on..or pull a cool one outta the fridge if you’re ever passing North East PC Repair Birtley..in exchange for a good deal on one of those forges..I was actually considering asking if you could supply & ship to the U.K. but then recalled the ridiculous postal charges..you’ve got a customer right here if you fancy making a few quid outside of work..You will most likely need it, the way prices & the cost of living are going here 😂😂👍

[@TobyFireandSteel]

Hahaha I ask my self those questions a lot. Especially in the last week or so. Lol. Yeah bud its something I'll probably think about bud. Ill give you a holla of i need anything pc stuff done cheers 🤟

[@woodstockxx]

Toby, Fire and Steel - anytime matey 👍😁

[@TobyFireandSteel]

🤟

[@Thedoug369]

Making the forge is the easy part. Where'd ya get the burner assembly tho?

[@TobyFireandSteel]

If you live in Australia you can buy from Gameco artisan supplies or in UK or Europe you can buy from www.uknifemakersupplies.co.uk uknifemakersupplies.co.uk/products/gas-forge-burners-1 hese the link

[@johnjude2685]

Thanks, Looks great. Measure once....cut once

[@TobyFireandSteel]

So true mate my dad used o say measure tricy cutty oncy 😁

[@michaelbecker516]

Hello, Toby Am from Germany and follow your work very much, think what you do is great. I'm a big admirer of you. But if there is a request to you, what's that blue spray you did on the mat. Would like to know what it is because I can buy this myself with us in Germany, there is not this. Sorry my Englich that I barely master.mache this with the google translated. With best regards Michael Becker

[@TobyFireandSteel]

Hiya Michael it's called rigidizer (kaowool rigidizer)my friend. Probably start by funding your local Farrier supplies they will have or hopefully help you find it. Also I've found it on ebay in the UK and have emailed you back a link if worst comes to worst mate. Thanks so much for watching. Let me know if you're still stuck 👍

[@WYTW1DOW3R]

Prewash. Also known as overpriced brake cleaner. Lol. Love the forge. Good job man.

[@TobyFireandSteel]

Lol. Thanks brother

[@randylewis3080]

Viewed in 2021-1-22, well done just what I was looking for. Only question - would you now run the cement level to the sides and why. Thanks

[@TobyFireandSteel]

Thanks mate. Ideally you'd flaunch it up the sides or even coat the whole inside

[@marceloassumpcao1042]

OK. amigo é LIKE , SHOW . Forte abraço do BRASIL .

[@TobyFireandSteel]

Cheers bud 🤘

[@bimborocks]

Awesome video Toby, now you've been using it for 12-18 months what would you do differently? How do you find the size of the openings front and rear that you chose and can you get it hot enough to forge weld?

[@TobyFireandSteel]

Now that's a great question. I'm intending to do a video on some of these points. I'm really happy with the front and back holes they both cover with a brick well. That said a slider to allow the bricks to be a little protected and not fall off is a much better idea than just a shelf especially as I made mine to shallow originally. And yeah its amazing at high temps forge welding with relative easy. Thank you so much for your question

[@chrishayes5755]

this is one of the better forge building videos. one problem though is your open area inside the forge is too large IMO, especially for a single burner. are you able to reach forge welding temps?

[@TobyFireandSteel]

Thanks mate 👍. The interesting thing is the internal size of the forge isn't to relevant to a certain point obviously. Its more important that you can block the openings off a bit. But yeah the short answer is. It easily gets to forge welding temperatures. No problem at all. It is a very good burner too though.

[@WYTW1DOW3R]

Also, about the front fire brick. You could easily cut out the area that's hitting the front guards so it'll fit over the guards or just cut it to the inner diameter of the opening, secure a short handle to the brick and good to go.

[@TobyFireandSteel]

Yeah that's a great idea bud 👍 cheers

[@bryanfranks1378]

I think that the propane hose from burner down to the tank looks way too close to forge looks like it will get Too Hot possibly melt through

[@TobyFireandSteel]

No I've been using this forge for years now and had no issue. It's also identical to thousands of other forges in Australia thanks though.

[@JustinTopp]

When lighting the forge throw some burning paper in there to get it started. Even in day steel should be at a bright yellow white color

[@TobyFireandSteel]

Thanks Justin they are great tips. This was a couple of years ago now and was the first time I'd lit the forge. Really appreciate your watching and your feedback bro. 🤘

[@JustinTopp]

Toby, Fire and Steel oops haha I guess you’d know this by then :)

[@TobyFireandSteel]

@@JustinTopp hahaha yeah bud I actually teach it now but I do really appreciate you pointing it out because other views will learn something from your advice 👍

[@doughenning4899]

Great vid! But I would recommend that the gas supply be further away. From an old Firefighter. Cheers 👍

[@TobyFireandSteel]

Thanks mate appreciate the advice. Im also an ex full time firefighter of 8 years. 👍 its was not particularly a worry to me bud as log is heavier than air so falls not rises. All the plumbing is good condition and lpg get very cold infact it freezes up in use sometimes. Austere is literally no heat transfer down on this i van out my hand on the steel shelf of the trolley. Cheer heaps tho brother. I all you watching

[@brandonspence2189]

Toby, I just finished making my burners and purchased my first anvil. I'm about to start on my forge using a 20lb propane tank. Can you link the insulation and quantity needed? Thank you.

[@TobyFireandSteel]

Hi Brandon are you in AUS or US?

[@reel11boutdoors55]

Did you use any refractory? Insowool/Kaowool is terrible for your lungs as it contains silica. Rigidizer is optional, but a refractory such as satanite or green patch is mandatory for health purposes. sorry if the question has been asked. Nice video, fun looking project.

[@TobyFireandSteel]

Thanks for watching. No I didn't render it with refractory cement just on the floor. The rest is regularly sprayed with rigidiser. I probably will cover it at some point though 👍🏼

[@phillipgargus7813]

Is that a picture of you with hair behind the tank

[@TobyFireandSteel]

Hahaha yep that was a pic of me when I was in real estate.

[@hervehooper1267]

hello ! Jolie travail

[@TobyFireandSteel]

Hi 🤘👍

[@olliefs9298]

Nice work! Where did you buy the kaowool?

[@TobyFireandSteel]

Thanks mate it came from Gameco Artisan supplies.

[@rodlacey560]

Hi Toby, Well done Just wondering, do you have to cut the back off, is it possible to stuff the insulation in through the front door opening?

[@TobyFireandSteel]

Thanks mate. I don't believe it is possible mate its much to dense.

[@stefanosannipoli494]

A saldare sei a zero, per il resto ottimo lavoro!

[@TobyFireandSteel]

Heh?

[@kdmecosolutions]

did you concrete all the sides?

[@TobyFireandSteel]

No mate just the bottom. But if I make another one I would do all the way around. I may even do it to my current one at some point 👍🏼

[@paulorchard7960]

Great video, but!!!!

[@adilsonegidio]

Hello my friend, congratulations. What is te the opening size of te the nozzeles at both ends of the cylinder? What product is this Blue.

[@TobyFireandSteel]

G'day thanks so much for watching. The sizes can be what ever you want really ( what ever works for you requirements) the rear one is much smaller and some people don't even have a rear one. The blue product is called rigidizer 👍

[@D-DAY]

Hey mate I just finished up my 9kg forge just wondering how I should set the gas reg ? Half way ish?

[@TobyFireandSteel]

Yeah start there man and adjst it as needed 👍

[@Makeitsquish]

Question, did you put refactory all around the inside of the forge or just the bottom of it I put refactory in the bottom and coated the rest of the blanket with the rigidizer but some people are saying that that isn't safe and I need to put refactoy all around the inside of the forge

[@TobyFireandSteel]

Hi mate. Thanks heaps for watching no I didn't but have always intended to. Though I have to admit I'm not sure its required as I trust Gameco so feel like if it was required they would have sold it with the kit but it deffo would not hurt. Thanks mate

[@Makeitsquish]

@@TobyFireandSteel ok thanks

[@TobyFireandSteel]

No problem mate

[@danielmoss2089]

first and found you!

[@TobyFireandSteel]

Hi Dan thanks man

[@seananderson9991]

Hi, I'm pretty inexperienced at fabrication but am thinking about building a forge from 16cm steel tube, rather than a gas bottle (maybe 400-500 long). The kaowool in the Gameco burner kit won't be quite the right size for me, huh?

[@TobyFireandSteel]

Hi Sean awesome building a forge is awesome. But if your asking for my advice I'd say 160mm id is just to small mate by the time you've insulated it ( regardless of type of installation) I just wonder if it would be to small to be practical. Are you planning on using it for knives exclusively? No hammer or cleaners etc? I think the reason a lot of people use 9kg gas bottles is they are readily available and the over all finished dimensions are good for several applications. If you do decide to go ahead with Gameco burners for your own design forge or even get a whole Gameco kit remember to use the discount code TFS10 together 10% off. Also if you dont used a gas bottle design the Gameco list still sounds like it would fit your dimensions. If not try Field Furnace in Sydney for refractory needs bud. I hope this helps. Please keep asking questions as you go.

[@seananderson9991]

@@TobyFireandSteel Karim at Tharwa Valley recommended I go with the thin pipe for efficiency's sake. But if the kaowool is 75 thick that won't work. Maybe 250mm. I will definitely use the discount code, thanks very much.

[@TobyFireandSteel]

@@seananderson9991 ok cool well Karim is really knowledgeable guy and has a great deal more years experience than I . Also the kao wool in the kits is 60mm from memory. Its probably worth talking to field Furnace mate 👍

[@rjgoble9638]

what size kit from Gameco did you use for a 20lb tank? im located in the US. (im building my own burners tho so i dont need the burners included)

[@TobyFireandSteel]

They may be different bud. This kit i got was for the 9kg gas bottle. Thanks for watching

[@judbyry]

Damn that tap came off easy, i cracked a rib getting mine off : (

[@TobyFireandSteel]

Wow geez man. That's crap, lol. You'll remember building yours forever bro

[@stevewhitaker1485]

What is the blue spray you used to coat the fiber?

[@TobyFireandSteel]

That's called rigidiser mate

[@edwardfuller9980]

I noticed you've got a couple of kids running around and I'm sure you know how unthinking they can be. Since the forge will remain hot well after you shut it off, you might think about putting an open screen over the sides and top to prevent them (and you) from accidentally bumping into it and getting burned. It shouldn't interfere with the forge's function and would remain within the envelope of the cart its on.

[@TobyFireandSteel]

Thanks. They are careful and very smart. Also would only make the mistake once lol. 👍

[@antoinedeoliveirarosas1594]

Bonjour c'est quoi le produit bleu que vous avez mis, merci

[@TobyFireandSteel]

It's called ridgiser bud

[@antoinedeoliveirarosas1594]

Thanks for replying, I've translated the name, unknown

[@antoinedeoliveirarosas1594]

Or perhaps you have a photo of the package

[@antoinedeoliveirarosas1594]

Hello, thank you for your response, apparently at the time of translation this does not coincide in France. With all my gratitude.

[@TobyFireandSteel]

@@antoinedeoliveirarosas1594 I'm not sure what else to tell you mate maybe contact a company in France that sells the high temperature insulation and ask them what to spray on to bind the fibres together

[@stemec2000]

why not weld the feet on before marking out the square hole?

[@stemec2000]

Great video - sorry I sort of criticised before saying that!

[@TobyFireandSteel]

No problem man thanks do much for your kind words. But yeah welding feet on first is deffo an option thanks for watching 👍

[@bubblehead7680]

So what was the mixture you made that you put in the bottom?

[@TobyFireandSteel]

Hi That's refractory cement bud. You can get something like it places that sell thermal refractory insulation etc. What country are you in?

[@bubblehead7680]

@@TobyFireandSteel In the U.S. by God of America. Lol

[@TobyFireandSteel]

Lol cool. On Facebook theres a group called "home built forges" there is a lot of American guys on there. If you ask they will be able to give you more idea where to get materials from mate. 🤘

[@bubblehead7680]

@@TobyFireandSteel Great info. I just went and joined.

[@TobyFireandSteel]

@@bubblehead7680 awesome mate. Feel free to share this video on there. Thanks

[@larrynewingham1494]

👍🏻👍🏻

[@TobyFireandSteel]

🤘

[@colinhalkyard2898]

welders best mate is a painter

[@TobyFireandSteel]

Lol not a grinder? 😂 cheers for watching and commenting Colin 👍

[@zachofalltrades6116]

Where did you get the burner top that’s premade ?

[@TobyFireandSteel]

Hi mate they come from a company called Gameco Artisan Supplies in Australia. www.artisansupplies.com.au/product/gas-forge-refractory-burner-kit/ This is the link if you use TFS10 you should be able to get 10% off mate

[@zachofalltrades6116]

Toby, Fire and Steel I saw where someone just sells the top I just can’t find the link yeah I checked the company out but they don’t sell just the top I have everything else , I just like how the top looks manufactured . I have a few I made.

[@TobyFireandSteel]

Heya bro yeah they definitely seel the burner separately to the kit also mate.

[@zachofalltrades6116]

Toby, Fire and Steel I’m just talking about the top adapter where the gas nozzle connects to the burner . The top screw part which normally you use a reducer or a t fitting if you’re building homemade.

[@TobyFireandSteel]

@@zachofalltrades6116 oh right the the adjustable venturi bit. Yeah ice not seen then for sale separately. Sorry bud

[@ericisrael8443]

Wanted to listen to your video and watch it but lost volume at 3:35 thought it was on my end but no

[@TobyFireandSteel]

It's so weird you say that one other person said that some time ago. Out of 8000 odd views you're the second person to say that exact time the sound stopped. I dont understand it. Could you please try another another computer? In sorry I just do get it

[@ibnormal71]

I lost audio at the exact moment as you (3:35---right at the transition of intro and the instruction video), except I only lost sound in the right speaker/headphone cup. So what I believe has happened is that (probably)the intro was filmed with different gear than that used to shoot the video. Seems the intro was shot in high-def while the video used a phone camera that could take a beating in a shop environment but suffered a bit in the A/V areas. The sound will cut out entirely if you are watching on a device with a single mono speaker or speaker set to mono in your audio settings. Hope this helps.

[@TobyFireandSteel]

Yeah mate it does seem that way dude. It was basically my first every video and I had veeery little idea what I was doing filming and editing wise 🤣🤣 thanks heaps for great explanation mate

[@ibnormal71]

@@TobyFireandSteel My pleasure. That's what we're all here for: helping out when we can. Great video (not finished yet: you weren't kidding when you said you were thorough--but that's fine by me. All these hyper edited videos often omit a step or piece of info that may seem obvious to some but not to others).

[@TobyFireandSteel]

@@ibnormal71 cheers mate. Yeah I made it because I could find nothing like it. Glad it's helpful 👍

[@kalypso4133]

12:02 it's staring at me.... looking into my soul. I'm scared.

[@TobyFireandSteel]

Hahaha the picture in the background?

[@kalypso4133]

@@TobyFireandSteel yuuup

[@TobyFireandSteel]

Hahaha that's me when I was in real estate

[@kalypso4133]

@@TobyFireandSteel Selling peoples souls wasn't enough then? xP

[@paulorchard7960]

Can barely hear you !

[@TobyFireandSteel]

Hi again Paul sorry bud same issue as before my lack of editing skills at the time. Thanks Toby

[@paulorchard7960]

You need to do some serious work on volume, when the music came on my house exploded!

[@TobyFireandSteel]

Thanks Paul I apologise mate ive just seen this comment for some reason. Also apologies for the sound it was one of my first videos and I had no editing knowledge at the time. I hope you managed to get something good from the video. Thanks Toby

[@johncoonradtjr.5141]

Measurements in English please

[@TobyFireandSteel]

Lol The English use metric mate do you mean imperial? Thanks for watching mate.

[@bubblehead7680]

Divide mm by 25.4.

[@paulorchard7960]

I subscribed, but the volume on your video needs serious work, at full volume on I could barely hear!

[@TobyFireandSteel]

Paul thanks so much for the subscription. And apologise for the audio it was basically the first thing I ever recorded and was done on my phone. I intend to try redo it at some point. Hope you will find them better. Thanks again

[@gilbertodiaz-castro626]

Talk too much and do too little.

[@TobyFireandSteel]

Haha sorry did I use to big words for you? Thanks for watching

[@scooterdadyo8700]

This video could've been edited down to 25-35 minutes.

[@TobyFireandSteel]

There's loads of short ones pal if you wanna watch them 👍

[@scooterdadyo8700]

@@TobyFireandSteel I have, thanks friend.

[@scooterdadyo8700]

@@TobyFireandSteel Thanks Buck-O

[@johnnymills9546]

No sound could not hear instructions. BOO

[@TobyFireandSteel]

So sorry Johnny do you mean no sound at all? Or a certain part? Thanks for your feedback.

[@johnnymills9546]

There was sound at the beginning but from the point that you showed the tank no sound at all to the end

[@TobyFireandSteel]

Thanks mate I've tried it from several devices at home and seems to work now. There may have been an issue with KZbin or something. If you wouldn't mind trying it again and letting me know I'd really appreciate it.

[@johnnymills9546]

Still no sound after 3:38 (min-sec) into vid maybe youtube is still having a problem here in the US

[@TobyFireandSteel]

Thanks mate I'll have to look into more tonight when I get home.