Build a Off Road Mini BUGGY using Engine 163cc - 4 Speed

Hello my dear friends, in this video I'm going to show you.Build a Off Road Mini BUGGY using Engine 163cc - 4 Speed. Thank you for watching!! Please subscribe to my channel.!
Thank you for watching your video. Please share your video to support me!
Love all of you :)
----------------------------------------------------------------------------
© Copyright by KST HACKS ☞ Do not Reup
----------------------------------------------------------------------------
#KSTHACKS #buildbuggypubg #diybuggy

[@Ятутглавный-т4ь]

Супер этому мастеру сделает всё самаму на все золотые руки. Класс даже больше!

[@advantagemarine7305]

Am I the only one who was impressed with the home made hydraulic press??

[@traktorbekov_urulyu]

Добрый день! Креативность, конечно, на высоте, но... Боюсь, что вы больше будете ремонтировать этот автомобиль, чем ездить на нём. И самое главное - никогда не крепите рулевые механизмы на сварку, это недопустимо!

[@jenabner]

I really like to see this buggy with highpowered 4x4 eletric hub motors! :D

[@donlorinsharp]

YES!!!

[@rome79735]

@@donlorinsharp Absolutely!!!

[@BaronHarconen]

Не плохо получилось, но транспорт одноразовый. Ремонту не подлежит, да и ездить на нем опасно.

[@AKIRA-u5t]

good morning. Oh! Amazing and cool is fine!😆👍️ But, da ho!😆

[@frankstetka7206]

I fear the universal joints are at an extreme angle but the creativity is great.

[@NXcorsist]

Amazing what this man does with an angle grinder and electric arc welder!

[@ksthacks]

Thanks for watching!

[@wet_phish4078]

And a big brain

[@glbaker5595]

And it only took him an hour and a half. I couldn't even begin to understand what all he done especially when he built that transmission and that blew me away.

[@BeetleSmasher]

@@glbaker5595the video was sped up like x2 so more like 3-4 hours on a buggy that has such shitty welds, thin metal, and bad design, that it wouldn’t even be able to handle a speed bump.

[@kennethcummings786]

It must took you months to build this highly engineered kart you should put bigger wheels on it and race it Good Job!!

[@ksthacks]

thanks you

[@gegersopian3413]

Mantap. Slamat. Chukcest

[@margaretjoysalillas-rosqui5224]

gawang pinoy. good job kaibigan galing

[@jamiespeirs885]

What an awesome project

[@bentessilva9255]

it´s is music ????,, belo trabalho .AMAZING

[@Chiennguyen63868]

Ban chế tác rất hay nhưng có một điều đáng lưu ý là trục dẫn động sau không có khớp thay đổi độ dài ngắn của trục một khi bánh xe nhún lên xuống trục này sẽ gãy đó là chỗ chưa hợp lí

[@ZÉREISALESSANDROoficialaovivo]

Um grande abraço

[@UHO221]

👍👍👍👍👍❤️❤️❤️👍🙏

[@itahadsteelweldingwarkassh9313]

Good

[@ksthacks]

Thanks

[@valmircarlosnobre5702]

Parabéns só o que posso dizer no momento continue sempre.

[@coleberg74]

Awesome build!! But maybe invest in a tig welder, or even mig Welder 👍

[@CiberPapa-24]

Можно приобрести редуктор коробки передач в точности как у вас? Сколько это стоило бы?

[@ksthacks]

oh, sory

[@CiberPapa-24]

@@ksthacks 😥

[@DoItYourself-DIY]

Amazing BUGGY

[@Alexnahar]

This guy built a gear box out of scrap parts out of a box ……. Tony stark.

[@Vyatich-sybiran]

Нет стабилизатора на передней подвеске.На скоростных виражах не заваливается? И как вибро нагрузки на больших оборотах и скоростях?Просто Я посмотрел,что центровка выполнена примерно,а о балансировке речи вовсе не было.

[@ZÉREISALESSANDROoficialaovivo]

Parabéns sucessos

[@jheffersonjung]

The front part of the Oscillating Arms are the ones that run the most serious risk of failure... Mainly because of the welding on the intermediate tube and the half-cut arcs to be curved. The suspension forces applied at this point are the most vulnerable and subject to breakage due to the welding of this tube (It is not the only curved tube). The front arches will be the first to fail because of their compromised structure, they will not be able to absorb and distribute the forces applied at this point of the chassis.... Unfortunately in this case this curved structure is only for aesthetics (an ornament). on the chassis. It will cause serious problems in the future if these errors are not corrected. A way to avoid breakage at these points would be to add a Triangle in this front part of the intermediate tube, canceling the forces applied to the arches, a Straight Tube welded between the intermediate tubes on the left and right, and a reinforcement in V between these intermediate tubes to the lower front tube of the lower swingarm reinforcement, this would distribute the suspension forces more efficiently, and avoid the previously mentioned problems with the front arches. I know this is a Mini Car and not an ATV, but with a few upgrades it could become a low cost one. Learning in this case making your own mini Car is most important in this story. Good job, hope I helped in some way.

[@BoonsanongMm-li2hh]

เก่งมาก

[@bloodsweatandtearsforeverl9833]

I noticed you can only weld in spots, if you want a good continuous weld- drag your welding stick faster when you use it it won't burn through, when it burns through it means you were in one spot for to long, or just turn down the welder, hope this helps

[@ksthacks]

Thanks for the info!

[@irwin209]

It also looks like he’s using the wrong rod should be using a 6010 AC rod and it looks like he’s using a 7018 DC rod that would make a big difference

[@sengvireak4120]

.

[@BuildBreakFix]

your missing fact hes welding galvanized steel on top of that...... in a house lol....... hes pretty much going to die anyhow shortly. frame construction least of his worries.

[@ZÉREISALESSANDROoficialaovivo]

Deus abençoe Tudo de bom

[@IM.B]

Legend say till now those bearings still weldered

[@Vinhhienvlog_1983]

Cảm ơn bạn đã chia sẻ

[@kiapotintia93]

This car machine is beautiful, my friend, but it lacks several things, such as headlights, red night lights, and headlights to see in the darkness of the night. My innovative and genius friend, greetings to you from Iraq 🇮🇶👏👏👏👏👏👏👏💋💐👌🏻👍🏻

[@نسكزئ]

والله يااخي الكريم ابن عراق المجد ان في بلداننا العربية امكانات لصنع مثلها وابداعات اخرى. يعني انت لفتت نظره الى الاضوية الامامية في الليل ..يعني فعلا تحتاج الى مثل هذه الاضافات.

[@laurentoutan9922]

Là on a affaire à un génie et non un bricoleur du dimanche !😎🙀

[@johnleong4807]

Great job ,you can build your shop for full time business . 👍👍

[@andreseloyapontecastillo1445]

Buen trabajo 👍

[@nguyenvanuong7239]

Quá đỉnh

[@نسكزئ]

Mama will be angry..since you've stained the house specially guest room. He bro. go and make her satisfied , happy and pleased. Follower from H.K.J ,,, ALWAYS BE HAPPY,,

[@rohimmurni6979]

Mantul Bosqu

[@mikemchaney1003]

Need to lower the suspension so the angles of the arms are not so sharp at ride height.

[@RIDWAN54PUTR4]

Nice👍

[@ksthacks]

Thanks for the visit

[@its_bk_official_001]

Bhai bike engine se banao na PUBG wala buggy bike ka wil lga ke Belding kar wil banao plz bhai 🙏🙏🙏

[@enka0107]

Buy a TIG weld man, its better than ordinary arc welder

[@ksthacks]

yes,

[@kelyplot15]

What about them county orange slippers! he had on them Bruce Lee Roy's

[@carlodelgreco3768]

Un lavoro molto ben fatto con un ingegno non comune : avrei rinforzato i duomi superiori degli ammortizzatori anteriori e il telaio e avrei messo meno obliqui i braccetti oscillanti la gomma spancia (nota che quando sei salito sopra tendono ad allargarsi sulla carreggiata ) questo è il mio modesto parere comunque i miei complimenti per un lavoro di studio e passione

[@TwitcyTrain]

This thing is awesome. Waaaaay over engineered which is a compliment. I feel like you could get more speed (while losing the reverse and gears ) and just go straight centrifugal clutch . But then again the gears is what kinda made the whole build more interesting

[@varde450]

For offroading you dount need speed. Šo gearbox is must have. At last 2 speed. One for mud driving one for more speedy driving. If it has 4 gears. Then its more fun and more effective. With just centrifūgal clutch you will burn that clutch in seconds when you drive in mudpit

[@isaacmadhavan]

@@varde450 The engine itself has a clutch anyway.

[@wessmith5487]

you need to add adjustment to all of these chains for when they stretch

[@pabloaguilarrealylopez328]

Good ideas and good knowledge, but you work with hooves instead of hands;😅

[@rickycooper8138]

great music

[@fernandoangelaford1483]

Thanks !!! beautiful workmanship !!! JESUS CHRIST IS LORD !!!! AMEN !!!!!!!

[@watanabetakeshi6872]

[@Sumutsevinc.22]

When cutting, write lengths on the iron, it is not read from the meter, how can we know the length.

[@note4776]

Mantap kendera,an yg unik ,,sy PGN belih dimana ya tempt nya MW pesan

[@robo3142]

Pretty good for peanut butter welding

[@jcskartsartesanais4776]

Top

[@bouuyaaamotor]

Bro Amazing 😯😯😯😯

[@billl-s3860]

This thing is a complete deathtrap, it won't be long before somebody is severely injured through it, It's an extremely good attempt but Completely under Simplified, Structural integrity is off the chart..

[@noobbuilderproductions7865]

Amazing work

[@maheshsonwane3593]

Sir kaha se ho aaap

[@wqh6096]

You should buy some bearing blocks.

[@camaro92026]

Too much angle on the suspension and U-joints

[@نسكزئ]

It is a good model one, but it is not practical or suitable for long distance. Any you are appropriated man. Take care to your uncovered feet .

[@mstf1574]

Kullandığınız malzemelerin listesini paylaşırmısınız?

[@andrescaneo319]

con chalas? y las baldozas totalmente llena de quemaduras !!! NO INTENTE ESTO EN CASA

[@Gen_S_Marik]

Ужас, просто кошмар😢

[@henrye718]

Welding on galvanized metal... Someone tell this brother in his language, it's poison.

[@fredghusby8058]

Interesting! I watched all in one go. Funny how it seemed as if you were building as you went along. No plan or drawings visible. Your gearbox is revolutionary! No clutch or gear oil needed it seems? I could not see any differential either, but at the actual speeds it is possibly not needed? Keep on giving us such good stuff! Thanks!

[@Jarda_B]

are you blind do you know what differential from ATV even looks like (Its the thing at the back and he even showed that it works how could you not see it open your eyes. And the quality of the frame is very poor and how he welded the bearings (they are no longer bearing because he ruined the balls inside by heating it by the welding )but he had a idea and if he did it with good quality it would be great and strong gokart

[@donlorinsharp]

@@Jarda_B The way he did the weld, one spot at a time, prevented the balls from being damaged as well as the seals and the grease. You obviously know nothing about welding in real life. Of course he used parts from ATV's. You are letting jealousy make a fool out of you. Does it break? There is your answer.

[@donlorinsharp]

I guess, like you said, at the lower speeds he figured lube wasn't needed. I think it would be fairly easy to add bosses for seals and then seal it up to hold fluid. The shifting mechanism would be the only difficult part but I'd bet he could figure that out too.

[@Jarda_B]

Are you dumb where you get that welding one spot at the time Will not damage the bearings, even welding one spot at the time Will make it very hot, And heating ruber and greese even to 60°C Will damage it, if He dissasembled it than it would be not as bad, but He didnt, heating greese Will make it Jelly consistency. Once i welded next to PVC pipe on the lowest settings on my TIG welder for less than second And it was still very hot even when i was pouring water on it after every spot weld, So I know what Iam talking about and I am building even go kart, that is better quality the most of them on youtube (toleration 1/2 of milimetre at the worst, very durable, but takes a lot of time ), something like Council House Creations, or Cars and Cameras, Rather be Welding and etc. I absolutely hate shity builded stuf this is good concept, but the real implementation is not that great BTW heating hardened steel Will make it weaker, but the Real problém Is the greese And the ruber, one more think such heating causes steel to expand, So if you weld bearing it Will make it lose.

[@conquistador1425]

That metal looks incredibly weak as if it will break first time you hit a good bump .

[@vla2uv]

"Build an Off Road Mini Buggy..."

[@ksthacks]

yes.thanks you sir :)

[@kolstee420]

Not going far offroad with those tires lol.

[@s.alonsomartinsmessias5972]

Olá. Gostará de saber como foi feito o diferencial

[@ricskiep5952]

Magkano nman kung ibibinta ang gawa mong buggy, maganda naman ang pagkaka gawa mo.

[@elimariomarta195]

Muito massa 👏👏👏👏👏

[@adenamsekian5279]

I'm very sorry to forward u a uneven question... Do you have a certain plan of design before start working. Have a nice day and good luck forever.

[@andreszarama7022]

Amazing!

[@MrImperator2]

Представте что произойдёт если етому чуду дать хотябы основы инжинерного образования и косарь зелени!)

[@vitalii1980]

Косаря мало.

[@wcwhitecold7215]

Сопьется от невозможности переварить инженерную инфу)))))))

[@laurentoutan9922]

Genial

[@joshsmith6208]

painting the carburetor is just starting to catch on in the US

[@kurniawanbaguspratama2625]

Im Request Sir,Change this Tire with Atv Tires...😅

[@ksthacks]

yes. :D

[@kurniawanbaguspratama2625]

@@ksthacks Oke Sir,I will wait it...

[@ptsdgopedsnbikes8156]

If it can pull it

[@daddypickle8395]

Hey did u use steel or aluminium foil r the frame ?

[@IM.B]

That was aluminum if i were correct

[@ashleytucker9291]

When welding you shouldn't let the current run through the bearings.

[@adamborsodi7123]

The bearing and hardened stuff welding bruuuhh.. It hurts to watch

[@AliaksandrTt]

And no lubricant (no sealing) in the gearbox...

[@NasedybhaiYT]

Seriously you watching full video 😜

[@jasmun.s1217]

How can I order this item?

[@XW0RKS]

Music at 43:13 ???

[@hornethornet4359]

О мои глаза. Качество видео 🤦‍♂️🤮

[@dockmasterted]

Put some bigger tires on it my friend.

[@Vlad-te5ij]

scrap mechanic

[@RajaDas-vd7sv]

Dada merokovi ek banake do

[@tomasquero519]

🏆 ⭐⭐⭐⭐⭐ 🏁

[@Acecool]

I want to see one of these with a CVT...

[@sebi.o.c.b]

Price of this?

[@KurtHammond]

do you have plans for this build?

[@namtrungbac9211]

Wow OK1. 🧢 Hehehe THANK 🧒 20092021.SAI GON.

[@vijaykorvekar1009]

Where did you get that differential

[@ZSU87]

what is the name of the box???

[@songsakkongnak1034]

how to price

[@jonathanameyibor7633]

What is the HP of the engine

[@MrAzza22]

Where is ohs

[@แดงรเนศ]

ที่นั่งขับแคบมากๆขับไปนานๆคงไม่สบายตัวแน่ความปลอดภัยคงไม่ดีเท่าที่ควรจะเป็นชิ้นส่วนการประกอบเยอะมากคิดว่าความแข็งแรงน้อยมากๆ

[@alperalabanda54]

So slow change gear ratio

[@ruslibonde9974]

Mau pesan gimana caranya mohon imppnya

[@williamcorrea3178]

0