Build Alternative Dewalt 18V Li-ion Battery | DCB200

Build Alternative Dewalt 18V Li-ion Battery Video
DEWALT DCB200 6.0 Ah 20V Li-Ion
Voltage 18V ~ 20V
Capacity 6Ah
10 cell of lithium-Ion 18650
Lithium-ion battery cell
Brand model: LG INR18650HG2
Standard capacity: 2800- 3000mAh
Rated voltage: 3.6V
Charging voltage: 4.2±0.05V
Maximum continuous discharge current: 20A
Discharge cut-off voltage: 2.5V
Weight: Max.47.0g
Size: Max.18.2×65.2 mm
Charge and discharge times: 500 times
You can find it bit.ly/3mBCiM9
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for your likes, comments, and subscription!
Have a nice day
Gear Show

[@Eden_M]

It's good you're including clips of your fails, it shows that even experienced battery pack builders do mistakes too, and as always, I enjoyed this video thank you!

[@r.griffin7941]

One mistake was charging cells to full voltage before building pack. That's just asking for trouble compared to working with cells at the lower storage voltage.

[@Eden_M]

@@r.griffin7941 I agree buddy but let's be honest, we want to see that a cell holding 4.20v and when it does, you let it rip and build a pack that is already balanced and fully charged.

[@kret63]

Wow, that was sparkly :D First time I saw someone short the batteries, hopefully last. Take care!

[@greengohm]

Great safety practices! Cutting towards yourself, so you won't cut someone else! :D

[@CheapHomeTech]

I noticed that too but the way you expressed it was classic. I've got to try using that method in the future!

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@thebeast7690]

it's okay. we as human will learn from our mistakes 👍

[@Khalid81751]

I swatched from craftsman dewalt now all my power tools dewalt 20v I love it

[@Austeration]

Nice job 👍 love your little extraction fan. Battery turned out great.

[@rabk5702]

Scary how easy you make building them battery packs great video 😀

[@leoprepper6544]

i have doen my first by your videos. Thank you.

[@RobertCranmer-up2fm]

My partner has a lot of tools, so when he needed a circular saw, I ordered this one for him as a Christmas gift. kzbin.infoUgkxYDKeIjKLOfcwTgdin7TtCutsz4MbIc43 He is incredibly happy with the purchase. He stated that he likes that it is powerful, but still easy to use and cuts very well. He mentioned that it is important to know the right tools for the job at hand, and this compact saw has been exactly what he needed for a variety of projects at his rental properties and renovations. He also appreciates the battery packs, as stated, he owns a lot of DEWALT tools, so he is able to always keep batteries charged as needed.

[@supiyanto6168]

Good battery pack bro🔌🔌🔋🔋🔋👍👍👍👍

[@itzmejai...9755]

Love from kerala 😍😍😍

[@ThaDIY]

ฉันชอบการสร้างแบตเตอรี่ คุณกรุณาทำวีดีโออีก ขอบคุณ ฉันติดตาม

[@yeagerxp]

Nicely done 👍👍👍Thanks for sharing

[@justarideout]

Excellent sorry about the injuries.

[@RestoredChannel]

I really enjoy these videos. Nice work!👌

[@BrothersRestorationIndustry]

Good job

[@황외수-l2b]

오우 큰일날뻔 하셨네요 다행입니다 👍👍👍👍👍

[@DD-DD-DD]

Glad you're ok. I'm looking at battery spot welders. Would you buy the Sunkko 709AD again, or something else? I need a wand for my application (large motorcycle sized packs).

[@hexidev]

I see this is 2 years old but anyone that sees this: Get a big capasitor spot welder as the sunkko is still not powerful enough

[@startcherif]

Very nice video

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@abyr-abyrwalg]

Отлично! Спасибо! Просто готовая видео инструкция.)))

[@МаксимДенисеня]

Балансировка покинула чат.

[@1badpete999]

We all learn to be more autonomous and creative by doing mistakes the ones that complains all the time it's because they never do nothing good with their own hands !

[@NamNguyen-ic4dn]

Anh đóng pin Bosch 14,4 trượt Đi anh

[@nelchan2421]

2:19 this is one of the most dangerous work in world

[@indianrailnature5365]

Wonderful

[@simonebuono_aw]

It happened to me while I was spot welding, the cells burned 🤦

[@mavi89092]

Elinize emeğinize sağlık

[@sobaborusu]

Aha türk buldum ldsğsg

[@UpinkProduction]

I love it good Keep uploading videos like this

[@AndreaV89]

I like your videos but I've always wondered if you've ever short-circuited cells by mistake. I'm glad nothing happened luckily. Greetings, Andrea from Italy

[@SY_Vlog24]

The - and + cable i think too thin to handle that much current.. change to a bigger one 🙏

[@eone2345]

2:20 is a process you must experience once for a while 😄

[@Eden_M]

It happens to the best of us

[@eone2345]

@@Eden_M Journey To The Best

[@Eden_M]

@@eone2345 West

[@mattex3396]

Once i did this. The nickel strip soldered itself to the battery shorting, i had to grab some pliers to remove it

[@eone2345]

@@Eden_M 😁

[@nutechniciandiy1742]

Nice​ job.👍👍👍

[@valmirramos4195]

Valeu Gear Show! Muito bom mesmo

[@lgm8114]

Is there a kit for flexvolt batteries?

[@juanvelasquez9114]

are that kind of bms safe?

[@lightbatmen]

2:19 Оу! 😱

[@slavioparush]

не зря там все эти пропилы и дырки в пластинках предусмотрели

[@scroogeH]

What is the circuit board called and what is that part number?and where to get it?

[@МихаилКандауров-п3ь]

Береги пальцы!

[@handle1004]

Good 👍👍👍

[@ivanjuca7598]

Thanks 👍👌🔝

[@johnclarke6647]

A question. If I read you right. The B1 wire goes to the 4.2 tap, the B2 wire goes to the 8.4 volt tap, the B3 wire goes to the 12.6 volt tap and the B4 wire goes to the 16.8 volt tap. Is this correct? Everybody on UTube just waltzes through the complete explanation that you gave by combining tap name with its voltage. Thanks.

[@Kamidashi77]

После такого КЗ стало интересно, сколько же там ампер? 🤔

[@Pablo-mu5yl]

Hi can you do a video how to make a battery when we don't have spot welder?!?!

[@waterboy540]

ive seen cheap ones on ali express

[@ErnieSesameStreet]

Is it ok to charge new batteries to full of 4.2v for spot welding? Because another is saying not to charge it full for welding, charge it to store voltage instead, is it so? I received my new batteries between 3.2v to 3.4v, is it ok or shall I return? Thank you

[@dennisyoung4631]

Note to self: make *absolutely* certain you do *NOT* short the cells! (Color-code with dots of Red Paint?)

[@scott9877]

Is this a special battery kit? And if so, is it sold by Dewalt since it has their branding on it?

[@LilasTools]

No this is not sold by DeWalt.

[@bigpig187]

Where do you see any Dewalt branding ?

[@bobsoft]

Its a China clone kit.

[@pachecoCardososilva]

Da pra fazer uma adaptação caseira e usar essa bateria em uma parafusadeira Makita?

[@Mellaroch]

Só comprar direto o kit da makita

[@vintilis1]

this 18650 litokala ?

[@yeshecan7]

Wonderful job....thank U!

[@tekwojtekwoj6157]

Hello my friend Where can you get such stickers for the battery housing? Regards

[@wo0416]

spot welder model ?

[@waiyanhtet2022]

Where can I buy such battery case?

[@yufadanpratama4011]

Sangat luar biasa

[@CheapHomeTech]

I want spring loaded compartments for the batteries. Not something I have to spot weld or solder.

[@ahmedali-cd2kh]

أحسنت مرحبا

[@dishahotwani8124]

Pls make a video on your workshop tour if u will will make so pls give a heart ! Will u make ?

[@anasaliyarkunju6746]

Link to purchase this product

[@orlatris96]

Hello good afternoon. Please help me. I have a Parkside 20V 2A battery, with damaged 18650 cells, and I have another 4A battery that I only use the box. Can I use the 2A battery bms and put it in the 4A box and make a 4 or 8A battery? If you can answer me I will be grateful. Compliments

[@coachronald]

My Dewalt 12V 1.3mah battery is not anymore working and they have stopped the production. Is there a way for me to rebuild it? Can you teach me how? Thank you.

[@edivaldosilva3974]

Parabéns...

[@tomn5413]

Nice jobs., by the way where I can order the parts ? Seem like the link is not working. Thanks

[@bobsoft]

Amazon or Ali Express

[@bulutkeles3592]

Geçmiş olsun

[@patrickmorrissey2271]

Nice!

[@aidilashraf8928]

Can someone explain why it shorted?

[@ngoctraiblack6412]

you in cambodia ?

[@juanvelasquez9114]

sir, you sell your refurbished tools?

[@baldeagleApiaries]

So how does the home build compare with a real Dewalt pack?

[@waterboy540]

same but different

[@Poppy-ib2hb]

👍👍👍

[@powertoolsrepair]

I made same mistake about year ago and trow all pack out of window and then watched how it burns 🙈

[@JMArtsandCrafts]

hello, what happened. it cooked!. wrong connection or tapping on metal strip?

[@E-hab]

Wrong connection

[@dungufed349]

He shorted the 4 cells.

[@solomonshv]

i feel like if you go through all this trouble then you may as well spend a little bit more money and build a battery with samsing 30T cells or those high output molicels

[@creative8029]

Hello, how can I get in touch with you

[@abdiomar269]

hello I would like to know if I could send you an old screwdriver to restore.

[@vyaire]

New DeWalt power stack build please.

[@MrXyzasdf]

Dear Friend, would you please be so kind as to show us how you print the decals? Thank you

[@bobsoft]

The Dewalt clone battery kit comes with all you see except the cells

[@emmettturner9452]

Love how it says “CE” when it’s neither the European certification nor the fake “China Export” CE since you made it yourself. ;)

[@coolmonkey619]

Why the fire happened

[@antalyaynselektrik9974]

Gercekten kaliteli videolar yapıyorsun başarılar

[@kemoomotivation9266]

Does this model board have a low cut off voltage????

[@bobsoft]

Yes a BMS is included.

[@whereitallhappens784]

would it be nice to add a background music like ncs or something

[@emmanouelchatzinikolaou1687]

Can we find this kit at Amazon or aliexpress ?

[@bobsoft]

Yes

[@MeilyFoodie]

❤️❤️❤️❤️❤️❤️

[@awishkaakalanka7751]

👍

[@Ale98375]

Where is bsm?

[@saadmughal8089]

Brother can u send me buy link of this case

[@gear_show]

I bought it from china store. But you can see it item.taobao.com/item.htm?spm=a21xtw.29178619/evo565760b742010.product_shelf.8.6e712ae3OpgQnu&id=652409692540&skuId=4728490437251

[@anhtho5168]

👌👌

[@albertoone3663]

👌👍

[@rafal5863]

2:20 That belongs on electroboom channel.

[@arvys28]

link not work :(

[@jneo4]

2:20 🙃😳

[@威森艾德沃茨]

同款Tommy HIlfiger😅

[@hardyanpajero69]

👍😎🍺🍩🛠️

[@tomnewtnt5718]

Za cienkie dałeś kable + ,-

[@petrolredmi6857]

Those cells that you have short circuited are damaged and won't last long.

[@elvector7401]

foi foda naquela hora q ele queimou o dedo ave Maria doido kkkk

[@E-hab]

I was afraid you would make the same mistake like the last video but you did worse 😂

[@valentino_govoni_official]

:o

[@chriscraft9681]

🤞😉👍