Build an English Wheel!

This week we are building an English wheel. It's a metalworking tool that curves sheet metal to create shapes like car bodies and metal sculptures.
Get a free sticker by either sending one of your stickers or an S.A.S.E. to...
Wildman Tech
P.O. Box 246925
Sacramento, CA 95824
These are places where you can see more of my work....
My web site - wildman.tech/
KZbin - / wildmantech
Instagram - / wildman.tech
Instructables - www.instructables.com/member/M...
LinkedIn - / marshwildman
Facebook - / wildmantech

[@mrhoogles]

thank you

[@danielloo1255]

I had never heard of an English wheel. This will be useful

[@achmadbalfas508]

Thank you

[@dolantremp]

Really cool build. This channel is so underrated

[@RustyGlovebox]

Well done Marsh, that was a great build and will be fun in the shop to create the tailgate

[@wyattoneable]

That was a great project.

[@builtnotboughtbybruce]

Great job Marsh. Thank you so much for taking the time to explain the process in detail. Your video skills are impressive too. Looking forward to seeing a lot more of your work.

[@frankbiondo2476]

I am always amazed at the treasures you make with discarded materials. Keep up the good work!

[@garagemonkeysan]

Nice video and build. Can't wait to see you use it for the Econoline. Mahalo for sharing! : )

[@GregsGarage]

I have a feeling you may want to weld a super structure around your frame. I wound up with 1/4" wall tubing on mine to get it stiff enough to shape the sheet. If you're just using it to smooth out walnuts, then you may not need that much stiffness. Is the bottom wheel steel? Lastly, you'll see how out of round your anvils are as you start working on panels. If they aren't concentric, you can pop them on a lathe and use a belt sander to true them up... It makes all the difference... Oh, and I need to find a scrap yard like you have!!! I need those linear bearings!!!

[@genuinejake9851]

nice!

[@stephenbarrett3234]

Awesome video!!!! Exactly what I was looking for.

[@tonydownes7424]

Nice job....great idea with the castors...keep up the great work

[@jeffbarker730]

Great job! I admire how you can just build things, engineer knowledge for sure!

[@WildmanTech]

Almost everything you see here is the first time I tried it. I'm learning as I go.

[@AerialLensVideo]

This is great -- THANKS!

[@builtbycarma]

nice

[@jeremyhanna3852]

So u should weld a 2" trailer hitch tube under your bench flush then u can weld 2"tube to tools like this English wheel and others that u don't use as much so its got a good mounting place but swappable to other tools

[@MarshWildman]

That is an excellent tip! I may apply that to a few tools I have!

[@WilliamLutesMaker]

You are Amazing. That is all.

[@tuninfranca4981]

🇧🇷 good job 👏🏻👏🏻👏🏻👏🏻👏🏻,

[@mandycole21]

Thank you for another Very nice build video it came out awsome and can't wait to see your video on the tailgate Also I think that your going to have to do some research on the wheels bc I do believe that it would help you be able to do a lot more stuff that you were planning on doing with it bc I can't remember who said it but I'm pretty sure that 1 or both of the wheels have a bevel on them and if it's only 1 of the them I'm not to sure if it's the hammer wheel or the anvil wheel but it's just something that might help you take this all the way to doing your tailgate as nice as possible and thanks again for another great video

[@WildmanTech]

Talk about a rabbit hole. The anvil wheels run a wide range and the different amounts of curvature on them makes a big difference in the effect they produce. I guess you'd call it a learning curve.

[@fringis1]

that thing you found at the scrap yard you said you didn't know what it was, donno if it would interest you but it appears to be a feeder for press. If I'm right it clamps and feed the coil into a die and should also take the bend out when you have flats that don't get hit in the part

[@WildmanTech]

I find stuff like that out there all the time. The heavier something is, the less it’s worth as the day it has to be moved approaches.

[@buzzsah]

First, it's been awhile, looks like you dropped a few pounds, looks good. I haven't used the wheel since I closed my body shop in 91. Nice build.

[@WildmanTech]

I lost 70 pounds using the Noom app. Gained back about ten for the winter, but I'm feeling pretty good. Thanks!

[@Benny-dv7xm]

omg! 😋Where are you located at that you have that equipment in a junk yard?

[@WildmanTech]

I’m in sacramento, CA, but I have seen similar scrap yards all over the USA. In fact, I make it my mission to seek them out any time I visit another city.

[@SnorrioK]

12:37 - I feel like you might need to strengthen the diagonals on the frame because it's ever so slightly bowing upwards from the movement through the anvil, lessening the tension on the plate, rendering the wheel less useful.

[@MarshWildman]

Interesting you would say so. I subsequently did exactly that! kzbin.info/www/bejne/eaXOY6p7Yq-qibc

[@SnorrioK]

@@MarshWildman - Oh, sorry, I didn't notice the date on this video.

[@WildmanTech]

@@SnorrioK no need to apologize. The next project I used it for, that exact problem became a problem and I added additional gussets.

[@curtmk2]

Man that scrap metal yard is awesome, not sure if we have one of those up here in Seattle, too much moisture to keep it all outside, the steel would rust pretty quickly.

[@WildmanTech]

There are several in seattle. The question is whether you're able to cultivate a relationship that will allow you to rummage around.

[@michaelmcclure8673]

I the the anvil wheel has radius corners to aid in the dome

[@WildmanTech]

I've ground them to add some radius. Very likely I'll make several as I learn to use it.

[@pawemichalak9490]

Hi good job which size metal profil you use 50mmx50mmx5mm?

[@WildmanTech]

2x2x1/8" and I later added gussets to the corners because it had a lot of flex.

[@pawemichalak9490]

Inside 2x2x1/8" you put 1.5x1.5 or some diferent i will be try bulid olso. Your lloknlike very good

[@heru-deshet359]

I'm looking at a factory made one for $175 on Craig's list right now!

[@WildmanTech]

You can get a pretty nice one on Amazon for $129. amzn.to/3vK5Bhc

[@heru-deshet359]

@@WildmanTech Thanks!

[@user-jo1vd3cl9c]

👍👍👍🇺🇦🤗