Build the 007 James Bond DB5 Aston Martin 1:8 Scale - Stages 81 & 82

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@thechids350]

All ready a patron

[@mikeking2539]

Wow 60 years together, that's something to Celebrate.....

[@donreid6399]

Just got home from a 12 hour night at work and have a BRAND NEW DB5 video to watch and relax with. Brilliant, Wayne!

[@UnicornPastelPrincess]

So amazing to see this car coming together can't wait to see it done but I will also miss it too, Happy 60 years married to your mum and day,

[@volkeroetcke2418]

Hello Wayne, my best whishes to your parents for their 60th wedding-anyversary ❣ Here in Germany we call it : diamond wedding (25 years = silver, 50 = golden) 🙂 Hope you will have a nice and healthy day and a gratulation card from the Queen. (i think there will be someone to watch those special dates) 🙂 As allways it was a nice and explaining video. I'm watching all of yours but not everything gets a comment. Mostly due to lazyness than to critics 😆 Stay as you are, keeo on producing and mostly stay HEALTHY . Yours Volker 🙂👍

[@steve1315]

Moin Volker

[@wobber999]

Congratulations to your parents wayne, I hope they have a wonderful day 😁😁

[@robertgripton4499]

This build is crazy just like you have said with what would be no build issue's than MEGA build final issue's. Loving the build as all ways. Stay safe all.

[@julianmhall]

Looking below I commented on this four months ago. The manufacturers need to release more vintage car models like this, the Jaguar E Type you built, and more movie / TV tie ins. Inspector Morse' Jaguar would be fab :) Also the Thomas Crown Affair's Rolls Royce Silver Shadow, etc. Even Lady Penelope's Rolls from Thunderbirds - they could have real fun designing that!

[@andrewsandoz8005]

Definitely an iconic movie car!

[@davidbassett4577]

Another great Video Wayne .. it’s amazing how much they are cramming in right at the end of the build! 😦

[@jasonshiers5771]

I wish I had the patience and talent to do something like this.

[@makkiezps4]

my lord! this car has came along very quick! i remember when you had just started this build!

[@djstehle9061]

I’m really enjoying this build

[@isfj1009]

Congrats to the parents. WOnderful. Fund build video.

[@stevegraham4336]

wow how time passes, congratulations to them both.

[@stevenwheaton874]

The car is really beginning to come together nicely.

[@theblower069]

Another good video wayne as always Like i`ve said before i remember doing mine. Looking forward to the next one.

[@m.b.g.musicproduction9658]

Hi Wayne, Thank you so much for the info on Mike Lane's Mods!, Just ordered the badge pack for my DB5, can not wait to see the result......Cheers!

[@dillonbrownell4475]

Hi Wayne, if you have problems getting the front wings and rear body to fit to the chassis it can be overcome by using a 6 mm drill to counter bore the location holes on the 6 front and 6 rear location posts. I just used a drill chuck by hand. Keep up the good work on your build videos. I am really enjoying them.

[@philippemure1742]

Bravo pour ces superbes vidéos Où peut-on s’abonner pour construire cette merveille , Bonne année 2022 !

[@jeffd7557]

👍 Great video Wayne , my best to you and your 👪 family 👍

[@bobbybates2614]

Hi wayne that looks exceptional I'm now waiting for the next issue of ghost busters as I had a email from eagle moss to say it's on it's way to me

[@thechids350]

Insulation tape probably to stop terminals shorting out on metal chassis and also won’t be as easy to load injector seat when body on

[@WorldofWayneUK]

Masking tape will do the job

[@barrywhitlock141]

This is what we have been waiting for, something that looks like a car, and it looks great, but as usual there are some parts unused

[@eddywells5689]

Congrats to mum and dad 💞💞💞🍺👍

[@barrywatson2261]

Is looking so good

[@frederiqueheremans6119]

you should weather the motorcompount a bit; but it looks great

[@daviddrennon464]

The ejector tab that gets pressed down. If you were to glue a spacer between them, it should allow the shifter knob to press it down farther. If there is room to.

[@WorldofWayneUK]

It actually works better when it’s attached to the Chassis

[@holtenauer63]

nice build

[@charlesverrier4008]

I’m assuming the big expensive parts are left to the end to avoid the costs of sending them out to people who cancel the subscription before the end. That way the higher profits on small stages subsidises the cost of the big stuff. Wouldn’t surprise me if they actually manufactured fewer chassis units than earlier stage components.

[@steve1315]

Enjoyable video weird build. Sequence.

[@julianmhall]

I prefer the XXX Dodge Charger way of naming the screw types, with two letters so you always knew the second letter meant it went into Plastic (P) or Metal (M). This way you have to know - good luck if the instructions are as inaccurate as they seem to be.

[@sci_tec]

Wayne should the wires that are routed underneath the steering column be rerouted to go over the steering column? that way they are tucked up higher under the dash.

[@WorldofWayneUK]

I don’t think it matters as long as they don’t hang down to where the pedal are.

[@edwardbellamy6559]

looking good Wayne question can you tell me where you got your sanding blocks your using on the Titanic thank you

[@WorldofWayneUK]

Amazon. I just type sanding sponge

[@jakeanderson-green707]

Very nice model whens the next enterprise d come out but love the vids

[@WorldofWayneUK]

When I eventually get a delivery :D

[@JeanLoupRSmith]

Any news on the Peugeot 205? It was getting close to completion that one but it feels like there's been no update for a while. Oh and happy anniversary to your folks. My grandparents celebrated their 60th wedding anniversary in 2010 and we were grateful that they were able to do so, especially now they're both gone sadly. No letter from the Queen for them but then again they were French... ;)

[@WorldofWayneUK]

The Peugeot should be here soon. It’s all been caught up in this logistical nightmare

[@matthewcampbell7153]

Hi Wayne... I live in Japan and would love this kit. Do you know if there is a complete kit option available? (as opposed to monthly)

[@WorldofWayneUK]

Not at the moment. In fact I don’t even think this model is available anymore

[@craigjackson4393]

Wayne, Issue 81, shouldn't the tops of the suspension be flush with the lowers?

[@craigjackson4393]

It looks like the surfaces aren't flush all the way down.... not finished the vid yet, but no technical difficulties test card yet....

[@ranosian1135]

You need to wear a tuxedo for final episode :P

[@roadrunnerj]

Part 12 of enterprise d was finally delivered today. You should see the size of box it came in it is coffee table size apparently there is a stand in the box too

[@willvolny5343]

Hello, Wayne, your series is brilliant, mate! You've got me hooked into the world of HUGE HEAVY METAL MODELS! I have a quick question that perhaps I should address to you directly, if that's possible: what sort of oil might you use? In the states, I tend to use '3 in 1 oil' or mineral oil. But perhaps there's a recommended oil, as I've not know the trick of dipping the screw in oil before, although I should have by now in my arc of life....

[@WorldofWayneUK]

Yep I use a 3 in 1 oil

[@WorldofWayneUK]

Yep I use a 3 in 1 oil

[@milrman12345]

It seems you built it completely different to when I built mine ,must have changed instructions ?

[@WorldofWayneUK]

Yep. I’m not even using the official instructions

[@milrman12345]

If you did you,d see the problems with it Wayne, gonna dig mine out try it again lol

[@nickofzo]

Cool, any chance on Porsche or Ferrari f40 video's soon? :)

[@WorldofWayneUK]

Once they arrive I will be straight on it

[@nickofzo]

@@WorldofWayneUK nice!

[@milanondrak5564]

Not much pondering of parts this time then.

[@johntreloar8203]

A 6 hr video sounds good to me... lol

[@charlesverrier4008]

I’m vaguely disappointed that this model has hard plastic seats and no self adhesive carpets.

[@eddywells5689]

👍👍🍺🍺🐕🐕🙏🙏💞💞🇦🇺🇦🇺

[@obirobkenobi3599]

Will you be sad to hand this over to the owner?

[@WorldofWayneUK]

Yep lol