Build the Ghostbusters Ecto-1 - Part 119,120,121 and 122 - Joining the Vehicle Together & Partition

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@julieblundell7421]

Hello Wayne, another great Ecto 1 build, this is one of those builds like the Orca, R2D2, Bismarck and the Millenium Falcon that you do not want to end, i'm loving it, all the best, Lee.

[@jamesallen5627]

Absolute nightmare !!!! But we got there . And yes I broke two also :( had massive trouble tucking front wing wires up . What an awesome build. And now got the powermodz fitted too .

[@jimimartin7756]

Brilliant video! Can't begin to imagine if one of the electrics did not work or come undone and you would have to take it apart again

[@WorldofWayneUK]

I don’t even want to think about that eventuality

[@midnightth3furry941]

Jo Wayne it's good to see that u got the new issues since the last time u did ecto was before you went to scotland

[@robertgripton4499]

Finally got there and as some people are keeping there body and frame separate. They will now know when thay will empty a box or shelf. Loving the build as all ways. Stay safe all.

[@eddywells5689]

Loved seeing the jump seat being used in afterlife loved the ending.😓😓😓😓🙏🙏

[@ohmydinosare]

That was a huge task, but the car is looking great, I was very excited to see the blue pipes going in, all the specific bits and pieces that go on the top and sides of the car are really nice to me, I think I'm going to feel that every time we add one of the wacky gadgets on there, I'm especially looking forward to the ghost sniffer being added, that was one of the parts my car was missing, I had to send away for a replacement, but when that came it was very exciting for me.

[@barrywhitlock141]

That was a very good video. those roof lights were a problem and although you try everything to prevent damage it happened, the wiring looked so confusing, luckily they all work.

[@salvatorepisapia7983]

Davvero bellissima non vedo l'ora di arrivare anche a questo punto di uscite! Sei veramente bravo nel mostrare il montaggio!

[@rickgregory9616]

I think I figured out your mistake on the partition. As identified by your friend from Russia: Following the image of where you're installing the partition - we need to switch it around so that the Speakers are facing out toward the back of the car. Above (at 6:46 into video) you have the speakers facing the front of the car - which to me would be the most logical. Why have speakers facing away from you? I bow to the Master for fixing the door problem without taking the body apart - but for grasshopper (little King Fu lingo there - David Caradine TV show) - I'd take the body apart! BUT thanks for the heads up on your livestream!

[@MGower4465]

10 screws to hold two unstressed plastic panels together, after another 16 to hold the bits in between them in position...and four to hold the top and bottom halves of the entire vehicle together. Perfectly logical.

[@michaelmackenzie3810]

When I start getting my parts from the UK eagle moss, I'm going to mention that I watch your channel.

[@WorldofWayneUK]

Nice

[@milanondrak5564]

Oh dear, breakages galore. Looking great though. My favourite movie car of all time is now nearly done. The roof rack is where all the character is with this one. It's the roof that turns this from a Miller Meteor to Ecto 1.

[@jonathandavey217]

Hi Wayne another get video I'm following you with the build just done issue 25 and from what I've just seen in this video not only will the ecto look amazing but as a complete novice I'm bricking it when it comes to this issue

[@Johnbuildsiconic]

hi wayne, great build, im really enjoying building the KITT, so it some point a would like to build the ecto 1

[@julianmhall]

'... I've already done mine...' We can't take you anywhere can we? :) Or as the step-father of a friend once said.. 'You can take him anywhere.. twice.. the second time is to apologise' *lol*

[@davidbassett4577]

Great video Wayne … bet there was a sigh of relief when all the electrics worked.. don’t think you want to have to take it apart again to fix any that didn’t work!

[@craigthornton1971]

Somehow got mine joined together easier than I thought, I pushed in sideways before turning over. Though somehow my right door has come off. Worst case scenario I will display left side facing! Haven't got all the bottom screws to go in but I'm not going to be moving it after stage 140 so shouldn't be an issue

[@NicolaMs007]

Really looks good, I can now get this model here in Australia, so am going to get it, as am real big fan of the Ghostbusters franchise, model is coming on really well now. You're also doing well with that sign behind you, 39 days without an accident, "Well done"

[@WorldofWayneUK]

That went back to 1 after this build

[@NicolaMs007]

@@WorldofWayneUK what happened, you were doing good?

[@WorldofWayneUK]

@@NicolaMs007 I caught my knuckle when I pieced the 2 parts together

[@steve1315]

Good work very big.

[@michaelciaravino6179]

This is the part that broke me on this build. I broke those 4 lights twice and glued them back together. I'm waiting for my soft work mat before I try to progress any further on this because I know I'm going to break something else. That and I can't get the partition wall to fit correctly. I think the body is torqued and the partition won't fit correctly.

[@michaeljohnwicks2328]

Found this very stressful Wayne. I do not think they thought about how difficult it would be to get the 2 halves together. Definitely a 2 person job. A complete nightmare. Got lots of wires sticking out. Lights kept turning themselves off. I will be glad when this is finished. Will be building the Batmobile, & decided it will be my last ever build, due to my poor eyesight.

[@WorldofWayneUK]

In all these builds I always have in the back of my mind how we are going to.piece the two halves together. It gives me anxiety.

[@paulclaude7323]

Hey Wayne it's been a while, i just assembled my Ecto1 and still waiting for parts ti finish this superb model, i subscribed 3 years ago and they stopped sending parts to Ireland last year...strange, gotta get in touch with them. Few things for this assemble: I didn't take the back wheel off and the model just clicked easy enough but i had to open the front doors in order to click perfect and to put the two parts together, just a thought. Thanks for your directions cause the magazine is very bad at showing how to build this.

[@WorldofWayneUK]

It’s now heeling hosted by Fanhome.com . You can continue your subscription from there

[@paulclaude7323]

@@WorldofWayneUK so Eaglemoss stopped sending issues after issue 33 to all subsribers last year? And i paid in full for the complete build....crap...i guess ill contact Fanhome...thanks for the info

[@WorldofWayneUK]

@@paulclaude7323 yer they went bankrupt

[@shanehenning1160]

I have the four flood lights now and since they have wires that will be on top I may super glue or epoxy these in place after the bottom is attached to the top and the car won,t have to be flipped again, this is a very weak spot on this.

[@Ragnar215]

I combined issue 32 yesterday no matter what I did they keep those lights from breaking I broke three out of four and I messed up the wires to the three out of four were two of the lights ain’t work and I splice them open and try fusing them nothing and I have a couple wires pinched in between the frame and the inside of the car I don’t know how I did that but thankfully I’m not super OCD I know this car is going to sit on my shelf so I’m not too worried I did use glue for the lights other than that the car is looking really nice

[@devernpinnock8176]

I don't recall in the movie where there was a window in that partition it was open when I get mine I'm leaving it open.

[@edwardbellamy6559]

Looking good wayne but did I see blood on your knuckle

[@WorldofWayneUK]

Yep lol

[@stevenwheaton874]

Great video Wayne. The car looks really good. Hope you find your search light. If you can't find it. How are you going to replace it?

[@WorldofWayneUK]

Yep. I found it lol

[@stevenwheaton874]

@@WorldofWayneUK glad you were able to find it Wayne.

[@ZenStudiosCO]

That looks amazing! I’m still stuck waiting for 71-74…my last delivery of ECTO-1 was in October

[@robertdoughty]

I think they had supply issues but it's starting to come through again. My last delivery was in September until I had a delivery three weeks ago and a second one yesterday.

[@ericcollins7455]

Right for anyone who's broken the lights off the roof I have a fix that's better than the original or superglue. I bought 2 types of superglue ( not Poundland type ) and the light just would not glue so I did the following steps bellow. 1 - removed the roof liner while the car is put together, it can be done very easily 2 - unscrew the broken bits of the light - The D shape. 3 - with a tiny drill bit or like me I used the smallest Flat blade screw in my Halfords £4 precision driver set and enlarged the hole and ran the hole right through the D chrome bit so it is now hollow. 4 - with the same drill bit or flat screw driver put a hole in the bottom of the broken light about 2-3mm deep 5 - find some QM screws from the extra EM give you 6 - refit as you would have done originally , when the threads of the QM poke through the broken D pop on the broken light and screw up The light now will be tight AND can be removed if you need to pop the car on it's roof again by untwisting the light.

[@l4taylor]

Hi Wayne. I’ve got as far as laying the Ecto on it’s side and testing the electrics. I had issues as none of the lights came on. By a lucky break, I undid cable S (ceiling lights) and suddenly, all the lights started to work. I took the ceiling panel back out again and tested it again - lights worked once front door was open. Any idea what happened? Was there a circuit shirt somewhere? Putting it back together tomorrow as it’s quite tiring on the back 🤣

[@WorldofWayneUK]

It sounds like a short

[@mikehipperson]

In notice that you have skinned your knuckles on your left hand! Does this mean that the 'accident' count goes back to zero?

[@WorldofWayneUK]

Yes. It reset back in tomorrows vid lol

[@Code_Monkey]

Over across the pond here and I'm getting quite frustrated w/ Eaglemoss' "back order." I've been stuck waiting for parts since the end of 2021 (for "issues 103 +). Can you put in a good word for me Mate? lol Anywho - thanks for these vids; at least I can better imagine what my particular Ecto-1 build will be all about. Cheers!

[@WorldofWayneUK]

I’m in the same boat as you in regards to the build that shan’t be named

[@hungerfordpetshop]

broke 2 top lights lol and ive got side mirror missing as well seems this pack was for old door we replaced, let me know about side mirror if you find out where it was or even if we havent had it yet bud

[@WorldofWayneUK]

I found it. Was in my spare box of stuff

[@lorddraven4995]

Hi Wayne, model is looking amazing, so close to being finished. Definitely the biggest car build you've done. Speaking of almost finished, what happened to the Peugeot and spitfire builds? Both were close to finished and haven't and any uploads for almost 3 months in the case of the Peugeot.

[@WorldofWayneUK]

I have the Peugeot here to do and the spitfire has slowed down as they are replacing the PCB board due to an error

[@fynjy47]

Hello, Wayne! Can you give me some advice on how to detach wires from other wires? They are so hard connected, so i am afraid of breaking them.

[@WorldofWayneUK]

Just hold as close to the plug end as possible and pull hard. I didn’t have any issues at all with these wires

[@SuperBabayka]

Hey Wayne! I watched this video twice (first on the phone, then on the computer) and in addition to the missing door lock, I noticed an error in the installation of the partition wall. So, it needs to be turned with the convex part towards the driver, and the speakers towards the passenger side) It’s bad that you have to remove the body again because of this and I hope that this time nothing will break. I hope you understand what I mean because I am using a translator (I am your subscriber from Russia). I wish you a good future build! 🙂

[@WorldofWayneUK]

That sounds explains why it is restricting the doors. Thanks for that. I’m on it

[@project.jericho]

It must be nice Wayne, it's been five months since I got a shipment. I'm still on 71!

[@WorldofWayneUK]

It crazy over in the US I hear. I got notification today of the next pack on the way. It means they are being manufactured. Just need to get them out to peeps

[@gregcarter9680]

Not gonna lie....I'm really nervous about doing this stage (just had 29 and 30 delivered over the weekend). Not to be "that guy", but I did notice it looked like you're also missing the door lock on the outside of the left rear door. I know you talk about your OCD, so just thought I'd mention it.

[@WorldofWayneUK]

Lol. Didn’t notice that but it’s an easy fix

[@BNTmodels]

I am nowhere near this stage, so if I'm wrong, then I'm wrong... but... could it be that you installed the partition wall the wrong way in? I believe the speakers (which are not even suppose to be there in the first place) should be directed towards the cargo area

[@WorldofWayneUK]

I did. It's the pinned comment in the video

[@mbblat8415]

My parts came minus the magazine, so your video will be very helpful. On a side note did I notice the box for a Pocher Ducati while you were fiddling on the floor? Would be interested to know how you rate it vs the part works.

[@WorldofWayneUK]

I’m starting it on Friday so will let you know

[@mbblat8415]

@@WorldofWayneUK If you haven't already done so try and get hold of Paul Koo's DVD, look on e-bay. I believe he now sells these as digital downloads as well, saves waiting for the physical disk. Massive amount of info on the real think plus lots of build tips. When I built my Pocher Aventador it was a massive help.

[@michaelbranch3583]

Hey Wayne,obviously Eaglemoss/Hero Collector should have had the know-how to make a contingency plan for all the externals like the wing mirrors,roof lights,and antenna's.They could have made those out of metal to make them a little stronger so they wouldn't break as easily like brittle plastic is. But quick question but is there any 1/8th Scale Figures out to add to the car?.I really want a set of poseable figures of Winston,Peter,Ray,and Egon as it just doesn't seem complete without them and also the spud Slimer as the bumbling nuisance character.I sure hope someone will do articulated figures of them what do you think?.Anyway I envy you at now being within 3 more releases from completion. Last thing but has there been any word on when the Enterprise D is gonna get back on schedule for releases?

[@WorldofWayneUK]

Check out the Facebook groups. Folks have been discussing that. Some even are 3D printing them

[@maxheadroomsfan]

I can't believe Wayne I've still not received the replacement door and never got hinges either.

[@WorldofWayneUK]

I haven’t reviewed parts for this for a couple of months now

[@bedfordshiremodeller4491]

Do all of the electrics actually work when you connect up the bodyframe to main car itself? Unlike what happened with the1:8 Delorean build whereby none of the electrics worked at all🤔🤨😬🤷‍♂️

[@WorldofWayneUK]

Everything I tested worked. The roof lights were the only things I hadn’t connected

[@bedfordshiremodeller4491]

@@WorldofWayneUK Oh thank god for that🤩👍👏🤝🙏

[@chrisjubb-hearnborough]

Really don't know how you got yours together. Mine traps wires at every attempt and then the back gets stuck as I try to lift it out. Half my lights don't work when none have been pinched. It's now sat on its roof to collect dust as I've lost patience with it

[@WorldofWayneUK]

I actually masking taped down all the wires and putting heat shrink around the point where the plugs join on the wires will stop them coming apart

[@obirobkenobi3599]

Was that easier than sandwiching the Delorean together?

[@WorldofWayneUK]

Barely lol

[@markg9186]

Finally got my issue 32... any advice for an idiot (me) that needs to remove the centre cap on the wheel that needs removing ??

[@WorldofWayneUK]

Nope. Just break it. They provide another one in the pack

[@bobbybates2614]

Wyane the blue spot lamp how is it going to be attach to the body because if it going to be screwed that means you are going to take the wing off

[@WorldofWayneUK]

It’s screwed from the top with silver screws

[@paulreynolds1510]

Hi are you doing/ showing lights working??? My roof lights not working but the lights with Circuit board work and on constantly???

[@WorldofWayneUK]

Weird

[@linkmasters535]

Yes I was wondering how tall is the car from the tires to the top of the ecto 1

[@linkmasters535]

Yes I'm trying to find out how tall is this car from the tires to the top of the car with all the sirens and antenna because I have a shelf in my room and it has slots for acrylic sheet that would cover the front of the ecto and if the top clears it I can install led lights on the top of the car to shine down on the ecto 1

[@robertgripton4499]

Watch stage one the size is on the poster.

[@linkmasters535]

I have the same poster but are you sure it is the right size won't truly know what the measurements are until you completely finish the car in front of you I'm on issue 8 I have a long ways to go before I get to issue 139 to see how tall is the ecto 1

[@linkmasters535]

I just hope that my shelf is enough room for the eaglemoss ecto 1

[@TourDriverSean]

I see a bloody knuckle... do you need to change that sign in the background to 0 again? Lol

[@WorldofWayneUK]

Yep lol

[@l4taylor]

I’m having just as hilarious a time! They sent out issue 29 + replacement door. Never turned up. While waiting for that - I got issue 30 & 31. Now I’ve been told the replacement issue/door will be sent with issue 33 as 32 is about to be dispatched. More annoying. Wayne - my right rear door doesn’t close properly without lifting it slightly. Hinges are as tight as can be. Any idea what the problem could be?

[@WorldofWayneUK]

That’s weird. It may fix when you connect the two half’s together as it pulls the sides in

[@l4taylor]

@@WorldofWayneUK maybe it’s due to not having the right front door on there yet. Annoying that they’re messing me about!

[@stephenparkes9354]

@@l4taylor all my doors are loose like yours, I have tightened all the screws before putting the two halves together but they are still wobbly. I never got a replacement door, what was it to replace?

[@bedfordshiremodeller4491]

For once Eaglemoss hav done the smart thing by using the2Blue exterior rubber tubes to both feed through/protect the wires at the same time

[@JAFKARNAT]

Did you cut the back of your hand ??

[@WorldofWayneUK]

Yep. Accident board is resetting

[@TheModelGamer]

Well, one good thing: I guess for people just starting this model out, you just showed them to leave that left wheel off to the side until you get to this point in the build. It's so confusing to me. Like, why make a model where you put so much on only to have to take it off down the line? It's like the people at Eaglemoss made it overly complex, making you risk causing more damage to your model. They could have kept the left wheel off, as well as those tabs that you broke, until it was time to put the car together completely. I mean, they gave you parts in Stage 1 of the James Bond car that you didn't use until, like, Stage 70 or something. So it's not like they're against that notion. Just...some of how they do these models makes no sense to me. But great job all the same!

[@ericcollins7455]

Anyones interior lights will not turn off ? I've checked switches , wiring , connectors and just will not turn off unless you turn off the car. It's not really an issue as I don't think it will ever get powered on once it's on the shelf. I'm wondering if the main board maybe faulty in the chassis of the vehicle.

[@WorldofWayneUK]

Mine turn off. All the switches need to be engaged with the doors closed. You need to check the door a are doing this

[@ericcollins7455]

just took the car upstairs after doing the build and the light now turn off ?????? looks like everything needed to be settled

[@ericcollins7455]

@@WorldofWayneUK checked all that and nothing would turn on with the wire S ( interior LED ) connected , horn/siren/brake light etc.. soon as disconnected it all worked. The 6x AAA batteries also were noticeably very warm to the touch too. I swapped them out just in case but just taking the car upstairs made it all work ??

[@WorldofWayneUK]

@@ericcollins7455 lol gravity?

[@ericcollins7455]

@@WorldofWayneUK who knows LoL , it now works :-)

[@reaperofsouls7700]

I haven't had a shipment for the Ghostbusters ecto1 in 4 months

[@WorldofWayneUK]

I am the same with the Enterprise D

[@reaperofsouls7700]

@@WorldofWayneUK it's frustrating and irritating

[@lutonian7918]

@@reaperofsouls7700 yh I know the feeling I haven't had or heard anything for 5 months either really irritating when some have and some ain't not good especially a build that lasts 2 years

[@obirobkenobi3599]

I got behind because I changed my debit card and they didn’t message me to say payment had not worked so I got 2-3 months behind

[@Thalon77]

The positive thing now is that after this pack you will never need to turn this model upside down.

[@WorldofWayneUK]

Definitely

[@Thalon77]

@@WorldofWayneUK BTW, putting some soft material under it while upside down is probably something that doesn't prevent the breaking of the lights on the rooftop, I think something solid to hold the upside down model like those trestles you use on the spitfire or the temporary supports of the Bismarck could work better.

[@chrisgwilliam9893]

👍🏻

[@mathewfr593]

👍👍👍👍👍

[@Ragnar215]

You’re missing a lock on your passenger driver side

[@johnhaigh3080]

hi Wayne is Easther watching the show on sky about dolls house's

[@WorldofWayneUK]

Yep. She’s watching Discovery plus

[@TechySpeaking]

First

[@eddywells5689]

💞💞🍺🍺🙏🙏👍👍🚑🐕🐕🇦🇺🇦🇺

[@breedhate68]

both my ecto-1 and delorean have been delayed since last October with no ETA, my millenium falcon is now 15 months delayed. I actually packed it up to the attic, thinking they went bankrupt

[@WorldofWayneUK]

I’m still waiting for the Enterprise myself

[@breedhate68]

@@WorldofWayneUK only company so far that hasn't delayed is Agora, about to finish bismarck and never had a problem with terminator which is done