Build the Ghostbusters Ecto-1 - Part 123,124,125 and 126 - The Gurney

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@mikeking2539]

I'm watching this now, and not knowing what you or anybody else is on about is part of my life!

[@scottmaziar4136]

Enjoying watching you from Tacoma Washington

[@kevinpayne5584]

Hello scott,so Seattle area nice !!!😛😎

[@scottmaziar4136]

@@kevinpayne5584 Pretty cold and gray up here so a lot of time to work on the models I’m doing a lot of the eagle Moss collection the delorean, James Bond echo-1 and the willys jeep and now the 68 mustang. I’m trying to get to understand how yet to follow your pod casts in order once I figure that out it will be easier for me. Well I hope to be a active subscriber to engage with all your antics.I’m to issue 94 on ecto-1 and should be to your latest soon. Scotty

[@NekoFallen]

Still love watching these builds. All of the tiny details they manage to put into these kinds of sets is amazing. Also, the date that this video was put out, we got the news that Ivan Reitman had passed away. RIP Ivan Reitman 1946-2022.

[@stuardjay]

I can’t wait to support your journey as a new Patreon supporter

[@WorldofWayneUK]

Welcome aboard Jay

[@stuardjay]

@@WorldofWayneUK Thank you sir!

[@philliposborn808]

Hi Wayne, just a little sub comment, though I did enjoy watching you build the gurney, and what nice quality too. Without mentioning any names, I used to work as undertaker/gravedigger, and I can tell you we called it the stretcher, to which we used to pick the bodies up on, I know 'Gurney' is the official term, but our one was exactly the same as the one you built, we could also fold it in half for tight areas of where cadavers were lying. Sorry to be gruesome everyone, but it bought my memory flooding back. Lol.

[@eddywells5689]

Rip Ivan 🙏🙏🙏🙏🙏🙏🙏🙏💞💞

[@barrywhitlock141]

The gurney looks amazing, so much detail it is like a new build,

[@UnoGroove]

Although I'm still waiting for my first few issues, I went ahead and bought all the required tools from your Amazon store! Such a useful link to have. Got me a PH0 screwdriver, new matt, clippers, tweezers, 3-in-1 oil and the magnifying classes. Thank you Wayne!

[@jfrFK28ST01fan]

Great video Wayne! It’ll be interesting on how it’ll go into the vehicle. RIP Ivan Reitman.

[@julieblundell7421]

Hello Wayne, great video mate, you seem incredibly calm and patient when building such fiddly things, I think your off your trolley, Lee.

[@stevenwheaton874]

Wayne, the gurney looks fantastic. Wonderfully detailed.

[@TheKnightsShield]

One of the things I find funny about these builds, is the fact that we build these models using small screws, but if we were the same scale as the models, the screws would be fricken' huge as would the screwdrivers needed to screw them into place!! When you look at the screws/bolts used to hold car doors on (life sized ones, that is), they're not that big, but the ones needed for these part builds are massive in comparison. Isn't that weird?! 😂

[@robertstout4764]

For the doors.. They are not as far off as you might think... Most of these screws used in models are 1mm -1.5 mm.. At 1/8 scale that makes the full size version of the same screw 8 times bigger or 8mm-12mm. Normally the bolts holding a car door on would be 10-12mm (similar to the 3/8"-1/2" used on many older American cars). The main difference would be they are usually bolts, not screws.. A lot of the other small parts would be held together with 6mm bolts (or the close equivalent in inch size ~1/4") so they aren't as far off an you might think..

[@Remsbricks24]

Can’t wait to see the proton packs on there .

[@paulreynolds1510]

Hi I’ve got my issues 30 and 32 today, but no 33!!! Also had a confirmation from Agoura model the Cobra coffee table book is being shipped early March

[@michaeljohnwicks2328]

Wow. The gurney looks amazing. Such attention to detail. Really looking forward to getting to this stage, as only on stage 18, awaiting delivery of 19, though is late. This build is quite something else. The best I have ever done, (even better than my Routemaster).

[@WhiteGloveModels]

So Cool Wayne! I can't wait to get to this stage. I've got a ways to go though LOL. Really loved your Intro by the way. You always know how to make us smile.

[@mikeking2539]

Odd not to have the 4th wheel included in the packs. But like you say the detail is amazing!

[@ohmydinosare]

It feels like a suitable time to get an Ecto 1 update, given the recent sad news about Ivan Reitman. The gurney looks amazing, though I'm wondering, if the legs fold like that on the full size one, would that not put them at risk from unexpectedly folding up under the gurney while a patient was on it? I can't see anything to lock them in the out position. I've nearly completed my playmobil Ecto 1 since the last of these videos, Playmobil were kind enough to send me all the pieces I was missing for free, and they turned up in the post about a month ago. Unfortunately one piece from that list got missed out, I think on the actual car it's meant to be the siren, so I still don't have that, it's the only bit that's missing now. They did offer to send one over, though it's not shown up yet, I feel like I'm in with a fair shot of having it and completing my car by the next Ecto-1 update. We shall see.

[@MGower4465]

Real gurneys of that vintage would have a latch that hollds the legs extended, which is released via cables so the legs collapse as they are pushed against the edge of the ambulance floor

[@ohmydinosare]

@@MGower4465 Aah, that makes a lot of sense, because they would definitely want to fold up easily when required, without fiddling about causing delays, but then not fold up at the wrong time, so that sounds like a sensible setup

[@milanondrak5564]

I hope they are giving you some proton packs to go on those brackets.

[@julianmhall]

This reminds me of going to see Groundhog Day in the cinema. After seeing it one friend accidentally joined the queue to see it again! *lol*

[@WorldofWayneUK]

😂

[@Mauscmkwk]

You should do the hachette ford grand Torino from starscy and hutch

[@craigthornton1971]

As far as partworks go, I don't think this is too badly priced at all. When you consider what the nearest equivalent of this model costs plus add on all the hours spent building it (I nearly said hours of enjoyment but not always haha), I think the price is ok. Liked building this gurney even if I did slice my finger when the screwdriver slipped screwing one of the wheels.

[@benc148]

love the build, but am wondering what happened to the stages 119-122. did I miss a video somewhere?

[@benc148]

ah ok, I just hadnt gone far enough in this one yet

[@yumanimoon]

Give to him an oscar for the introduction but am sad we lost Ivan Reitman 😢

[@WorldofWayneUK]

Definitely

[@Thalon77]

Wayne, can you check a thing now that the gurney is almost over? I remember some doubts about the rails for that gurney on the car floor, can you check if the space between them is right for the wheels of the gurney to move freely or if it's necessary to reverse them?

[@WorldofWayneUK]

Yep. I just uploaded a short. It fits fine :D

[@mikeking2539]

Just an after thought, as this is/was issue 33, and at the start of the video you say that you were expecting to be doing issue 32, so perhaps the other wheel comes with that issue?

[@WorldofWayneUK]

No. It comes in 34. I have the instructions for 34 here

[@bengyboy4454]

RIP Ivan Reitman

[@WorldofWayneUK]

I know. What sad news to wake up too

[@DrFeelGoodHelpDesk]

@@WorldofWayneUK One major reason I hate Monday's...always bad news on a Monday... But don't get me started on Thursdays, never could get the hang of Thursdays.

[@garywiseman5643]

Can anyone please tell me when you receive the display base for the ecto-1

[@MrRobovision]

That Gurney frame does look plastic with a chrome paint finish to it, must just be how it reflects the studio lights. :)

[@WillsWorkshop]

For continuity you will have to modify your accident sign when you do issue 32 🤣

[@Notatopher]

Wayne, could you post a link to the oil you use when screwing things into metal parts? I’ve tried looking on your Amazon list but I didn’t see anything. Or maybe someone here can post what type of oil they use? I’m USA based.

[@WorldofWayneUK]

3-IN-ONE Multi-Purpose Drip Oil, 4 OZ www.amazon.com/ONE-Multi-Purpose-Telescoping-Marksman-Spout/dp/B084VPF586

[@Notatopher]

Thank you!

[@davidspencer8373]

Like video

[@gunny1215]

Is another great video Wayne. I've been stuck on pack 98 and I've been waiting now 5 months to get something from eagle moss. That is very poor business from a company like that. Wayne what is the scale of your Orca please? Thanks again, Bruce. oh I'll be sending out your package this week. I item finally came in.

[@WorldofWayneUK]

Nice. I think it’s about 1:24 scale

[@gunny1215]

Thanks Wayne.

[@robertgripton4499]

R.I.P Ivan Reitman 😱😢🙏🙏

[@josephstanley5138]

What happened to stages 119-122 Wayne

[@WorldofWayneUK]

I explain in the video

[@josephstanley5138]

@@WorldofWayneUK now I see what happened

[@steve1315]

Nice gurney dude would it fit in the Delorean ? Lol

[@WorldofWayneUK]

Lol

[@pattersonmichael]

The future is now?

[@jimmyjean1867]

Hello c'est moi ou y a pas les numéros 119 a 122 ?????

[@WorldofWayneUK]

It’s coming

[@rondyson8323]

That was a great SUPERBOWEL hey. Except for the so called half time entertainment .........sorry, not my style . anyway , I don't know that much about the rules other than the First down , but it was great to watch and good to see your team won . Anyway , catch you later . Ron fron Moe , Gippsland , vic

[@gregcarter9680]

"What happens in the future? Do Eaglemoss become assholes or something?" **Looks at all my Eaglemoss Builds that are stalled because of stock issues** Weeellllll....funny you should ask. **EDIT** How the hell you wanna have a gurney with 4 legs and 4 backets....and only build 3 legs in the issue, and "just put the brackets to the side". What an OCD Nightmare....that's just pure evil.

[@MaidenFan1]

Wayne did you hear Ivan Reitman has sadly passed away

[@WorldofWayneUK]

Yes, so sad

[@dragonrising768]

Would you say that this video.....IS LIKE THREE WEEKS LATER?????

[@WorldofWayneUK]

lol. Im hoping to have 32 in the next week :D

[@dragonrising768]

@@WorldofWayneUK okay. Lol!!!

[@dragonrising768]

Btw, congrats to your L A RAMS for winning last night!!!!

[@roadrunnerj]

yeah eaglemoss can be really annoying luckily had no stages go missing so far