Build the Ghostbusters Ecto-1 - Part 115,116,117 and 118 - Lights, CB Radio and Headlining

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@robt8593]

Ghostbusters Afterlife has a new meaning given the delays in this build. Glad to see it underway again - you've got me searching my emails for another Eaglemoss 'Dispatched!'

[@edwardodwell1920]

Keep getting a different excuse from eaglemoss each time I chase it up

[@michaelbradley9385]

My lights I pushed them into the holes on the front reflector

[@lutonian7918]

I haven't had any Ecto 1 parts now for 4 months but good to see a new vid Wayne 👍

[@milanondrak5564]

I'm loving this model. Pity I have no room for my own.

[@udomartens9733]

Super 👏👏👏👍👍👍❤️❤️❤️

[@MrMcGear]

Light it up!

[@bedfordshiremodeller4491]

It's good to see the Ecto-1 again

[@UnoGroove]

Awaiting my first issue. Decided to take the plunge after watching every episode of this series recently. Thanks Wayne.

[@mikeking2539]

i have never seen anyother parts of this build before! I think I only found out about you through one of your R2-D2 videos. and got hooked. Can't waite to see the Orca later on.

[@stevenwheaton874]

Wayne, the Ecto 1 is looking really great. I'm really enjoying this build.

[@steve1315]

Great to see this back on the bench dude.

[@willsco76]

World of Wayne drinking game. Every time Wayne says ginormous, take a shot.

[@barrywhitlock141]

It is looking good, I have a couple of scraps of 2 x 1 wood offcuts that i have wrapped a bit of cloth around so that I can turn the vehicle upside down near to and part that may be delicate and the roof doesn't get scratched

[@michaeljohnwicks2328]

Looks amazing Wayne. Really looking forward to getting to this stage. Am awaiting delivery of the body parts in the next few days. Thank you for your fantastic tips on some of the intricate work. As you say many times, you make mistakes so we don't have to. I have been following all you videos during my build, & not the magazine.

[@rflester53]

I've seen a fix for those floppy sun visors on Facebook. Disassemble the visors, then run a strip of tape (or 2, whatever is needed) along the groove where that long metal shaft will go. Then reassemble the visors. The tape should provide the resistance needed to keep them from flopping around Glad to see that you're getting kits again. It's been three months since I've received anything here in the States. I'm starting to wonder if I'll ever be able to finish this beast.

[@michaeljohnwicks2328]

What a fantastic idea rflester53. Will use his tip when I get to this stage. Thank you for sharing your great tip.

[@ryanburke3782]

I just received issue 32 aswell

[@Remsbricks24]

Awesome!!

[@brianmcdonald3831]

For the scale of CB cord you can always use a screw will give it that smaller tighter wrap and be angled like CB cords are 👍

[@88reaper88Si]

Oh that’s an excellent idea! Thank you

[@JimMccaig83]

Finally!!! I’ve been waiting forever for you to do a Ecto 1 video!! Loving the Titanic series as well!!

[@ohmydinosare]

I think this must have gone up when I was away at my friend's wedding, I completely missed it, only realised when I started watching today's one and the car had lights on the roof that hadn't been there in the last one I saw. Whoopsie! Oh well, I'm caught up again now.

[@bobbybates2614]

Hi wayne I had trouble with 116 with the lights . I had to do the same thing in 117 with the ends parts

[@coffillm]

Blue Deck lights led in the lens hole, Im worried you want spot it till its too late.....smashing better get cracking.

[@sheldonlee9440]

Hey there Wayne, am I crazy because it looked like there were holes in the back of the blue lenses for the LED'S to go through. ✌️

[@johnhaigh3080]

good to see more work getting done on the Ecto-1 . here is a mone from me on another part work was missine issue 90 on the X-wing but got all the rest 91 to 100 they sent my newsagent a litter saying it was on back order now they are saying they cant get it with it being finished and they are not reprinting it so now stuck

[@WorldofWayneUK]

That’s crazy. What was in Part 90?

[@johnhaigh3080]

@@WorldofWayneUK not sure would have to look back throught them

[@jeremylemings]

Wayne, stage 117 shows 6 screws holding the metal strip to the headliner. you missed two under the sun visors.

[@WorldofWayneUK]

Yep. I got them in the end lol

[@PeteJCooper]

That’s a bit weird you’re not putting a light into the little holes in the lenses otherwise you hardly get any light through

[@leighbellouny3904]

I had the same thought

[@TDax]

Wayne your 116 splash screen has the info for issue 115

[@WorldofWayneUK]

Yer I realised after Inuploaded lol. Todays deliberate error

[@mitchgivant6623]

I c the little robot is done, I need part 3, hope that’s the last ty

[@WorldofWayneUK]

It is. Should be out this weekend

[@davidpalmer2285]

Hi Wayne just received issue 32 5mins ago.

[@l4taylor]

Hi Wayne. I’m in the UK. I’ve been waiting for issue 29 to arrive for over 2 weeks now. 30 was also dispatched a week later. This morning, I got 30 but also 31. I’ve not even paid for 31 yet lol. It’s maddening really that I’m still having to wait for 29/replacement door. Waiting on Zoe to reply currently!

[@WorldofWayneUK]

I got 33 today and still no 32

[@l4taylor]

@@WorldofWayneUK why are they messing up like this? Think it’s happened to someone else as well - receiving an issue not even paid for yet.

[@mikecrawford1247]

Little upset right now got my issue with the passenger side fromt door but the 4th pack (interior door panel) wasn’t included, out of stock will be in next shipment, and was the only part I could work on until replacement door is sent 😟

[@RFAurora]

I wonder how long it'll be before Mike Lane provides a cloth piece for the headliner, and a better CB?

[@Thalon77]

Still trying to figure out where those cables on the rooftop will be routed considering I don't see any hole on it.

[@WorldofWayneUK]

I’m thinking they go down a pipe that is part of all the stuff on the roof rack

[@mbblat8415]

@@WorldofWayneUK It looks like it would have been just as easy to route the light cables through the roof and under the headlining if Eaglemoss could have done a little bit more work. I'm worried that the wires will be very visible on the completed model as there is quite a gap between them and the roofrack. I might experiment a bit with mine this weekend.

[@TourDriverSean]

Is it me, or does it seem like the screws for the lights are still accessible after the headliner is on? If that's the case, I'll wait to install them so i can flip on to the roof and add those lights when that's all done

[@WorldofWayneUK]

Yep. They should be although when we start to build the rack on the roof the lights will be pinned in

[@davidspencer8373]

Like video

[@bobbybates2614]

Hi wayne there are two more holes near the front visors

[@WorldofWayneUK]

Yep. I got them in the end

[@Ragnar215]

This is definitely not an easy build I have broken so many things on this car so far the first problem I have is the little trim you put around the windows the glue deactivate on me and when I turn it around it catches on something and Bends it right off so mine look bad and the second problem I’m having is Eaglemoss send you some pretty warped parts which I don’t feel like going through a process of going through a re-ship because they’re always sold out and the third problem I have is I have no room for it lol

[@bobbybates2614]

Hi wayne just to let you know in issue 95 of the spitfire that there is another battery box to fit into the base

[@WorldofWayneUK]

Yer I saw that. It arrived yesterday. 8 BATTERIES!!!!

[@gregcarter9680]

So jealous...here in the U.S. nobody has gotten anything beyond Issue 28....and that was released last October.

[@TheKnightsShield]

0:17 So the car was getting too big for the shelf? I've got bad news for you, buddy, you're going to need a bigger shelf for the Orca. 😂😂

[@WorldofWayneUK]

Too right lol

[@AndyPipkinOfficial]

Wayne, stage 116 intro screen said deck lights and window wipers which was the stage 115 info

[@WorldofWayneUK]

Yep. My mistake

[@remixsongs9352]

When are you doing the test run video for the alien build?

[@WorldofWayneUK]

Probably next week

[@VerhoevenSimon]

Lovely video, any plans for a Tardis?

[@WorldofWayneUK]

That would be cool. I bet @sprueverse would love a large scale model of that too

[@mitchgivant6623]

When u starting on the stuff on top of vehicle?

[@WorldofWayneUK]

Next vid I think

[@bristolcityboy1]

Hi Wayne. Great build. I've decided to go ahead with this after watching your build. On top of shipping is the a customs charge as coming from the US? Thanks

[@ejc05gto]

Hi Wayne. Just want to ask what screwdriver set you have for the tiny screws? And the oil you use for the screws in metal parts?

[@WorldofWayneUK]

The oil is just a 3 in 1 oil. The PH00 for tiny screws and a PH0 for all others

[@Projects-In-Progress]

What stage did you receive the Exto shell in if you don't mind me asking, sir?

[@WorldofWayneUK]

It came in 3 pieces. I can’t remember which stages but it should be in the playlist

[@Clearwater2408]

How long did it take for your first two issues or arrive? I'm so impatient and I want to get started. Your videos are fantastic btw. Andrew. Belfast.

[@WorldofWayneUK]

It can take up to 28 days

[@alainrule9907]

Hi Wayne, off topic, it where did you get all the miniature Star War helmets? Looks awesome

[@WorldofWayneUK]

They were a Deagostini release a few years ago. Star Wars Helmet Collection

[@alainrule9907]

@@WorldofWayneUK thanks, I was Googling and saw the Hasbro Black series but your collection looks more detailed 👍🏼

[@devernpinnock8176]

Maybe put a dab of hot glue to keep the LED in place.

[@tiki-ed5573]

I haven't received an issue in 4 months, I called yesterday and they don't know when the warehouse will receive the issue I'm on hold for. Terrible company

[@jamesallen5627]

Has anyone had e labelled as M ?

[@robt8593]

Hi James, well done, struggled with this just now. Sure the E should be am M. The guy who did the instructions was looking at it sideways. Think Wayne did too. I’ll go with you mate 👍

[@denismogg2342]

absolutely, thought it was my eyesight...! but definitely an 'M' on my lead. Not an 'E'....

[@cbart1987]

i would love to get the kit but eaglemoss hates Canada

[@williamtrask1582]

i wish you tube would start showing parts 130 i keep getting the old ways i getting tried of watch the same old shit

[@RomanVolkov898]

В России очень много людей кто делает тюнинг машин под машину EKTO 1

[@WorldofWayneUK]

Хорошо. в реале еще не видел

[@eddywells5689]

🍺🍺👍👍💞💞🙏🙏🇦🇺🇦🇺

[@jamesallen5627]

Also… roof mounted lights are sooo stupid ! Who’s idea was it to fit like this ???