Build your own houseboat polyethylene pontoons and aluminium frame

[@rockdaddio69]

Those are some very impressive statistics. Flotation, size, cost. All very impressive. I would imagine a good number of builders will be motivated to start drawings or look to adapt ideas from tiny house builds. Inspiring.

[@blindade1]

I haven't seen your product in person but just from the video they seem really robust and of exceptional quality. Congratulations. always great to see great products on the market

[@luimackjohnson302]

Amazing! Thank you for sharing this video. Incredible & ideal in my area. I may need a few. Greetings from Kambaramba villages & Nubia village, Papua New Guinea.

[@willmoore7582]

Awesome work and dimensions to this frame and floats! Great video guys.

[@MarineDockSystems]

Thanks 🙏

[@CybertronGangsta]

Really nice video. Would love to see what a completed project looks like.

[@johnrogan9420]

Thinking that adding the pylons to a full shed might be more economical then building expensive plyons and a frame first...then adding the little home.

[@JamesRiner-rv1mv]

Very very nice looking pontoons.Thats nothing but quality.

[@alexanderk.1838]

To bad they disabled 👎

[@two4nine460]

I like the poly floats

[@engchoontan8483]

looks good for those with container houses or camper vans at double the 23k to spend another 23k... at least their electronics will be dry

[@Formation_Plastics-Bradford-UK]

Nice! Do you manufacture the floats? If so, are the HDPE? We recently built a barge/narrow boat from HDPE, such a versatile and easy to use material.

[@MarineDockSystems]

Yes we make these 👍

[@_onesimpleidea]

@@MarineDockSystems And the question about material?

[@CyberSnakeEater]

Why the ridges on the pontoons? It's a diver's nightmare to keep the hull clean

[@robloxfriendlykidbatmansanti7]

Very epic

[@Edmund_Squid]

The rear most pontoon section on each side should house a motor and a jet drive.

[@RileyColburn-gy5rp]

Beautiful

[@TheKevstube]

CAN ONE SECTION BE USED AS WATER TANK AD ANOTHER USED AS SEPTIC TANK? ONE ON EACH SIDE FOR BALANCE? PLEASE REPLY!

[@MarineDockSystems]

Yes they can be used for storage. They are made from food grade polyethylene.

[@rustyholt6619]

effing brilliant thanks

[@JohnBraman413]

wish you could ship to the US. i'd love one for a build i want to do.

[@_onesimpleidea]

​ @MarineDockSystems Can you ship the pontoons internationally?

[@danielquenneville3561]

How do I get about purchasing this unit and get it over in Québec, Canada ? And what would be price approximately with delivery.

[@MarineDockSystems]

It’s a bit to large to ship to Canada. I can sell you just the polyethylene floats and give you a drawing to get the frame welded up locally. Regards Brett. Where are you in Canada. I was born in Trenton Ontario. I live in Sunny Queensland now Australia 🇦🇺

[@danielquenneville3561]

@@MarineDockSystems so how much in Canadien dollars for your largest floats 36’ feet long. X 2.

[@MarineDockSystems]

@@danielquenneville3561 polyethylene floats 33 feet long $9500 ca I will have to get some freight costs on Monday.

[@danielquenneville3561]

@@MarineDockSystems now you gave me a price on floats. What about the floor deck. It seems to be 2x6 aluminum square tubes. My plan is building a 36’x12’ house boat. 8’ front deck and 4’ back with hard top deck. The built will be totally aluminum construction. Question?? With your experience, would 2 floats be adequate ? I’m planning to propel the boat with 2 Yamaha 50 hp Bigfoot.

[@MarineDockSystems]

@@danielquenneville3561 Hi Daniel please send me your email address so I can send you some information.

[@zeusapollo8688]

Aluminum frame fastened to plastic floats with stainless bolts.

[@baharzainal]

how to order only the bottom part (floating)?tq

[@MarineDockSystems]

Please contact [e-mail]

[@anthonymaresca4839]

Can’t I just buy blue 55 gal drums? And build a frame for them?

[@MarineDockSystems]

Yes you can. The advantages of these floats are that they are food grade, 8 to 10mm thick and can be bolted at the top so you don’t have straps around them. You can also get them through survey if you wanted to rent your boat out or do an Airbnb. Regards Brett

[@yourippa9242]

Nice 👍

[@MarineDockSystems]

Thanks

[@issacharnistrian2668]

Can this be sent to the United States?

[@MarineDockSystems]

Yes we are shipping to USA where about’s are you? We have a container going to NJ next year

[@baharzainal]

how to order the bottom part (floating)?

[@MarineDockSystems]

Please give us a call or email. Queensland 26 Corbould Rd Coolum Beach Qld 4573 Australia 07 5324 1557 [e-mail]

[@salehcan]

I am very interested in purchasing this product, but I am really concerned about the way to attach them, as each side of them is attached only by one screw, meaning that each one is connected by four screws. Is it possible to add four more, or to have additional cleats on the sides?

[@MarineDockSystems]

They just have the bolt holes on the ends

[@davidvalens3337]

how much does this cost in usd?

[@cryptoknight6425]

What are the wait times on something like this to be built?

[@MarineDockSystems]

4-6 weeks at the moment. Might be faster? Regards Brett [e-mail]

[@cryptoknight6425]

Thanks Brett 👍🏼

[@violettownmicroenterprises1528]

Hi...looks great ! What is the current price including GST as at Nov 18, 2022 ?

[@MarineDockSystems]

This one is about 30k please email Marine Dock System with your details www.marinedocksystems.com.au

[@MONK-7]

Weight is 4500k is that because of the float weight or because of the aluminium frame? Cheers

[@MarineDockSystems]

That’s how much it can carry

[@MONK-7]

@@MarineDockSystems cheers

[@selipakaki3964]

How can i order the float sir?

[@MarineDockSystems]

Please contact [e-mail] kind regards Brett

[@aggabus]

622 kg toon ÷ 10800 kg 12 tune displacement 5.7%

[@aggabus]

100 x 33. Quatoon 64 x 24. Ft

[@vlachyna]

Já bych si ho i postavil, ale hledat v tyhle komoussky zemi místo, kde můžeš kotvit, to je bez nechutnýho uplácení v podstatě zbytečný…

[@Juan-oy3fo]

Pontoon 622 kg. $9,600. Frame 400 kg $13800. 1022kg ttl $24,400 38 sq mt Gross weight 4500 kg

[@aggabus]

14k x .67 frame About 10k usd

[@Juan-oy3fo]

0:06 10 x3 33x12 0:19

[@aggabus]

2 inch draft toon alone

[@codymcgallion4257]

Is this available in the US

[@MarineDockSystems]

Not at the moment we need a US distributor

[@blindade1]

@@MarineDockSystems How about south africa?

[@MarineDockSystems]

@@blindade1 no we don’t have a distributor in South Africa but we can quote freight if you know what you want please email [e-mail]

[@zanerobertson6744]

How much would this cost

[@MarineDockSystems]

Please email [e-mail] and let the know what size your after.

[@Juan-oy3fo]

12 float 840 liter/ kg displacement 10 080kg ttl disp

[@Juan-oy3fo]

10 ,L x 3.8 w

[@aggabus]

881 lbs frame 407 sq ft .983 sq ft per kg

[@aggabus]

About $7000 12 toons 10,080 liter

[@aggabus]

1:1 linear/square ft

[@aggabus]

Alu 10 kg m sq Stee 5.4 x more

[@aggabus]

8 x 10m l. 80 m 24 x 4m w. 96m 176 m alu 40 sq m ÷ 176 .22 m deck per 1 m long alu 4.4 long alu per 1 sq m deck

[@Juan-oy3fo]

400kg Frame 622 kg toons

[@Juan-oy3fo]

4500 kg disp

[@Juan-oy3fo]

1022. Kg ttl

[@lazarosanchez3412]

How much

[@MarineDockSystems]

Hi this one is currently 33k inc GST Please email [e-mail]

[@aggabus]

407 sq ft

[@aggabus]

2180 kg ÷40 m = 54kg m

[@aggabus]

600 ft & lb 2x6 alu 10$ 6000$ + 7000& labor..

[@Juan-oy3fo]

10 x4.8 0:08

[@Juan-oy3fo]

0:22. 9k 0:33 13k

[@patrickmckowen2999]

👍

[@aggabus]

176 m steel rail rr 135lb yd 66 kg m Steel rr rail 176 m weight 9900 X .20 * 2138kg × $.37 us $ 788 ÷ 13800 17 x cheaper 5.7 % * 5 × less or 1/5 .20 Because dont use but 20% of rail and use less of framing

[@aggabus]

788÷40. 19$ m sq

[@Ansset0]

that's spam

[@aggabus]

Do tell?? 0:21

[@aggabus]

13,800 ÷ 176 m l 78$ per m l $13800÷40 sq mt $345 sq m 13800 ÷ 400 kg $34 kg & sq m

[@idahoman325]

What is he calling GST ?