Building 3D Patterned Cutting Boards Part 2

This is the last half of my build process for 3D patterned cutting boards. Part 1 documented the first half and you can watch that here: y2u.be/1eg9t-XpGvI
I used maple, walnut & cherry and finished everything with mineral oil before sealing with beeswax.
Originally, I wasn't planning on filming this entire build. Just a clip here and there to post on the other platforms (Instagram/Tiktok). After a little ways into it, I realized I had been filming almost everything anyways and figured I'd go all in. I decided it was too late to switch to the horizontal 16:9 ratio that's ideal for KZbin and and chose to stick with capturing everything in the 16:9 vertical ratio.
Enjoy the show!
Ryan
**This pattern is not my original creation. It belongs to @mtmwood who has plans available for purchase through his website.
▶️ Watch Part 1: y2u.be/1eg9t-XpGvI
▶️ Further support this channel
SHOP BOARDS: www.westcoastboards.ca/shop-1
PAYPAL: bit.ly/3NOhbBO
CRYPTO: bit.ly/3u6Zx4s
▶️ Follow
Instagram: westcoastboards
TikTok: www.tiktok.com/@westcoastboards
▶️ More Unique Builds
3D Patterned Coffee Table
y2u.be/npjxCYLcuFs
From Barrel to Butcher Block
y2u.be/uiu0Hkd6mb0
3D Patterned Cutting Board
y2u.be/Jrh_g79Rzh0
Links to items used in this video:
Freud Glue Line Rip Blade: amzn.to/3iW1gE5
GRR-RIPPER 3D Push Block: amzn.to/3xVopuF
Gravity Heel Kit For GRR-RIPPER: amzn.to/3D08oHI
3M BlueTooth Hearing Protection: amzn.to/2VVVB8v
Silicone Glue Brush Rockler: amzn.to/3yZumrH
Framing Square: amzn.to/3iXIFrn
Metric Tape Measure Stanley: amzn.to/2XvzKox
Juice Groove Router Bit: amzn.to/3zlfhkz
Pipe Clamp ¾” Bessey: amzn.to/3iV9KLL
F-Style clamps Bessey: amzn.to/3k2KhPL
Titebond III Glue: amzn.to/37OE44p
Camera Tripod: amzn.to/2XCxT1q
Sony A6400 4K Camera: amzn.to/3hRPR78
Iphone Tripod Mounting Bracket: amzn.to/3m8pptb
Planer 13” Dewalt: amzn.to/3xVNe9N
Planer Knives: amzn.to/3g7fD6L

[@jbaltz77]

Wow, I admire your patience and persistence getting through all those steps! The boards are amazing!!

[@ryanhawkins]

Thank you!

[@robinfulton9057]

There's a lot of work in those boards, they look great. MTM is the king.

[@danafosburgh2775]

Yet another beauty. Based on the length of the videos, and your ability to edit, you could probably get dozens of entertaining shorts, using every keyword known to mankind related to cutting boards. Keep on truckin" !!

[@ryanhawkins]

Totally! I‘ve been exploring the “shorts” territory more these days

[@danafosburgh2775]

@@ryanhawkins I think the pouring on of the finish, and seeing the grain & pattern come to life is particularly satisfying!!

[@ryanhawkins]

@@danafosburgh2775 I was pretty lucky to have some great natural light pouring in that day

[@PapaFlammy69]

I've never seen someone cut from behind the table saw before! :D

[@ryanhawkins]

It’s a little trick someone recommended to me to square up larger panels using the INCRA miter gauge.

[@Leipieo]

Wow! So many steps, so much dedication and what a great result. Thanks for sharing and keep it up.

[@ryanhawkins]

Thank you.🙂

[@roberth4190]

Wow, I know what it takes for me to make one board. Can't imagine doing that many all at once. Amazing work!!

[@ryanhawkins]

This was a beast of a project for sure.

[@tknyte]

Was looking forward to part 2. You didn't disappoint. Beautiful boards. :)

[@ryanhawkins]

Glad you enjoyed it!

[@TheJkaeser]

Amazing video. Amazing cutting boards. Couldn't believe the number of steps involved.

[@ryanhawkins]

Lots of work, thanks for watching!

[@jonathanhadden8199]

Beautiful work!!

[@ryanhawkins]

Thank you very much!

[@Powerinvisible]

Perfect 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@oneshotme]

They look great and again you did an excellent job making them! Enjoyed your video and I gave it a Thumbs Up

[@ryanhawkins]

Thanks so much!

[@oneshotme]

@@ryanhawkins You're very welcome!!

[@jeremiahsmith6103]

Shut up and take my money! Excellent work.

[@ryanhawkins]

Appreciate it🙏

[@carlosaugustosoutopimentel6779]

Parabéns ficou show de bola 👏👏👏👏 trabalho muito bom mesmo 👏👏👏

[@ryanhawkins]

🙏🙏

[@MANJITSINGH-ko2oi]

BEAUTIFUL BEAUTIFUL AND BEAUTIFUL no other words can say anymore. weldone.

[@ryanhawkins]

Thank you so much!🙏

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@ryanhawkins]

Thank you 🙂

[@cabman86]

After 100 gallons of glue and 10,000 clamps, it came out beautiful!

[@ryanhawkins]

Thanks!

[@nologification]

A-M-A-Z-I-N-G ! ! ! !

[@ryanhawkins]

Thanks!

[@danfofi2388]

Can I ask what the different wood types are that went into this board? Looks amazing

[@anthonytilly5558]

Those boards are absolutely beautiful... and you do it all with basics which makes it even better... Great work . 👌👌👌Do you sell the plans for that design??

[@ryanhawkins]

Thanks so much! I don’t have plans for this one, sorry

[@stormkhan4250]

Love the boards and all the effort into making each one. Looks like you could really really use a drum sander! Save you a load of time sanding all that instead of using that belt sander.

[@ryanhawkins]

100% I could use a drum sander!

[@jorgemuia3463]

Hola estoy facinado con tus cosas , son 4 colores verdad, ayudame a crecer te felicito por tu empeño y gracias por compartirlo con nosotros , saludos desde argentina

[@tomnieman6459]

You know there are tons more hobbiest than professionals you could add to your income selling compete cut lists and plans. Think about it.

[@jojones9194]

The boards look great. Roughly how many hours do you have into these boards?

[@ryanhawkins]

The boards themselves probably took a total of 45-50ish hours to do.

[@jojones9194]

@@ryanhawkins From rough cut to finish? If so thats great.

[@ryanhawkins]

@@jojones9194 That's correct. I've built a lot of these and have the process pretty dialed in.

[@michaeldorling49]

Loved the video. Are you a Michel Gondry fan by any chance?

[@ryanhawkins]

Thanks, I’m not too familiar with his work other then “Eternal Sunshine…” which I really enjoyed.

[@mass112594]

Dude, those boards are incredible man. I’ve been building boards for almost a year now and want to do some 3D end grain ones. Most definitely going to make a few of these. Do you sell your boards and what do you charge based on size and type (end grain/edge grain)? I can imagine one of those larger ones being north of $500-$600 maybe more. And by the way, I as well would LOVE to have a DRUM SANDER! Must have it. :) does your planer have the regular cutter head or the Shelix? I follow Kris Devo who has a similar finishing process as you do.

[@ryanhawkins]

Just seeing this now Mark! I do sell the boards I make based on size and pattern. I only build end grain. The 16x20 is just over $600. I have the regular cutter head, not the shelix. I also follow Kris, very envious of his set up. All the best to you!

[@marcosaslan1802]

Me imagino que precio tendrán ? Aquí unas tablas de esas de 30cm×35cm normales con diseños menos complicados bordean hasta los $ 50 , 60 dolares , solo porque la madera es media buena , aunque casi aquí no se ve mucho ese tipo de trabajos , Saludos

[@saeedfv5628]

Good, very noice

[@DanKoning777]

*Well done; beautiful.* One thing, it should be illegal not to turn your phone when recording.

[@ryanhawkins]

haha, right! I won't be doing that again. Thanks for watching!

[@tomiwood]

Absolut fantastic !!! Fucking Great work and only 142 linkes is a Shame!

[@ryanhawkins]

Man, I appreciate that!

[@ptth.084-]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@ryanhawkins]

🙏🙏

[@georgegiggey6767]

How much for one for my son in law for Christmas

[@ryanhawkins]

Really all depends on size. Please check out my website - westcoastboards.ca for sizes, pricing and ordering

[@georgegiggey6767]

Really like the one with the knife on top

[@georgegiggey6767]

Really like the one with the knife on top

[@georgegiggey6767]

Really like the one with the knife on top