Building a 1000hp Junkyard LS for CHEAP!!!!

[@gd1996]

I learned my lesson and always check rod bearings at a min before installing... which is a perfect time to gap the rings.

[@79tazman]

I got a junkyard 5.3 Iron block took it apart gapped the rings and tossed the pistons back in using the same bearings since they looked great bought a new cam that worked good with boost new lifters ported the heads checked the heads and deck to make sure no warpage used ARP stud kit and Felpro MLS head gaskets and it works great the highest boost was 22lbs with no issues

[@MiniTrucklol]

Is it still alive?

[@Daniiel694]

Yeah is it still alive?

[@twistedteeter1233]

The lunch hour videos are a much appreciated break before headed back to work.

[@markus360s]

"Cause we not gappin' any rings, we just gappin' fools"- John Doc 2020 🔥🔥😂😂

[@dboy5207]

Jonny boy I’m glad I found you

[@reallybadaim118]

That made my soda come out my nose.

[@Justin67987]

This quote needs to be a sticker for us sloppy Ls guys

[@hondatech5000]

5/28/20 the last time anyone ever used this phrase.

[@todddooley793]

We ain't gapping rings we gapping fool's lololol

[@gsppuffer]

You gotta try a summit rod/piston combo and run it to 1000hp

[@johnhendrix1692]

I rebuilt my LS1 Aluminum block Over the Winter. I had The same exact problem with the Cam gears ton of slack in the chain. Bought stock gm first then went to ktech still loose then bought nylon guide for chain took up some slack but still Wasn't comfortable with it. Ended up buying melling precision gears for it. 9ﾟ swing either way and finally got a tight chain. $400 later didn't return any the other stuff.. They just run loose!! Love the videos keep up the good work fellassss

[@dogman_]

How long do you think it will last for a daily driver, no racing. Well maybe a couple of stop light passes.

[@bennyboom63]

When Phils head popped in there for the cam install had me rollin. Good stuff brotha

[@forterierocks]

I just dropped a 6.0L LS in my 86 Z28 and its awesome car has enough power to be fun to drive now

[@anthonyromeo4655]

whats a good starter that you would recommend.. also id like to build stout 5.3 with a procharger.id like to have something reliable to say 1500 but might not see 1500 for awhile.

[@BoostNBalast]

How do you clean it without pulling rods out?

[@RudeBoiDrew305]

3:44 how about some new cam bearings? lol they showing copper too

[@cpylant1226]

What company did you get those head gaskets from if you don't mind me asking

[@single_cam9199]

What was that pad called you cleaned the deck with

[@jaywalkin8205]

Why is the intake fly cut flipped ? Is it to support better combustion flow? Because I’m not quite sure the valves would hit the bottom of the piston without hitting the top first

[@dannycoots9503]

Great video I learned a lot from your videos I was thinking about going 5.3 but I believe now I'm going 6.0 turbo I would like to get close to a thousand horsepower for my Foxbody build

[@derekwhite6135]

Was the engine rebuilt or you just put good pistions and rods and cleaned gasket materials in it like so what I’m asking you didn’t do no machine work on black cause I’m thinking about doing just good pistons and rods n home cylinders put em it cause I also have a junkyard 5.3 runs good but just broke a vaulve spring and one lifter where spring broke so was gonna do this while I did that if that’s all you did was just hone cylinders n install forged pistons and rods

[@rifleman7313]

Would it be possible to make 1000 H.P. on pump gas out of a junkyard LS was wanting to use a cast iron 5.3L truck engine. If necessary could see doing a 383 stroker build (if cost isn't prohibitive). Unless other mods are financially more feasible.

[@wildalexyt7420]

Yo you ever figure it out I am planning to do a 5.3 cast iron too

[@DNUTZ4U]

Question...if I wanted to run an LS in a 2nd gen Camaro with a single turbo would you recommend running the Holley Sniper EFI kit? Also, when doing the valve adjustment on an LS can you do the whole set to zero lash and then 3/4 of a turn method? Seen that done quite a bit for engine builds.

[@hornetracing1070]

What motor oil do u use

[@michealwriska2920]

Hey u should do rods an pistons please do an just take the motor over to tkm an have it bored oh ya summit has a h beam rod an any cheap aftermarket piston

[@williamalcala2324]

how you make 1000hp on a sbe 6 liter? trynna get some knowledge?!!

[@donalddooley209]

How much air fuel you can stuff inside the motor

[@9thgatedim273]

What's a good 4.8 combo gen 3 looking for 700hp

[@JOHNPHUFNAGEL]

What makes the LS9 head gasket and LS7 lifters better?

[@ericsplan1]

John what are you doing with the big thumper cam ????

[@rifleman7313]

Do you think that I would need to upgrade the rods and pistons if I wanted to build a ~900HP or so junkyard 5.3L LS with a S475 turbo and camshaft upgrade? I just didn't know if the stock rods and pistons would be strong enough to handle the stresses? I capped it at ~900HP so that I should not need a built transmission and could get by with a Stage 5 ATS 545RFE, or built axles.

[@keithfrisell4271]

John doc 5 feet or 50 seconds warranty rebuilt !

[@Kingcadillac816]

I'm differently going stock block big turbo low boost as doing turbo two time piping waist gates ECT multiple times is differently not cost effective

[@crider46]

Oil pump ? Which one are you using

[@lesomori293]

What is the specifications on the lamb cam?

[@darrenlooper1095]

Is that 5.3 a pre 2002? If so it would have came with the composite gaskets and the cylinder heads will have the notches that won't seal with MLS gaskets. Lmao I just figured that out the hard way on my latest gen 3 turd.

[@flyingpancake7790]

What is the part number for that cam?

[@raythomasson8660]

What kinda lift and duration does the lambcam have?

[@kevinpoiencot824]

Yes do chose on both.

[@natepierce1281]

Hell yeah guys. Gapping a 4.8 to beat up and learn from in my suburban. 7875 turbo.

[@sinistermutt7006]

I think you should give away the Ranger and make sure the winter video tapes blowing the 6.o up

[@SultanJackson]

I have a 6 liter block. I need you guys to build it 600hp for a drop in to a 1994 caprice classic

[@SultanJackson]

I have the stock crank as well. How much would you charge me

[@Bigmxcoplayz]

Shesh im just now seeing this 2yrs later😭 i just bought a 6.2 from a Denali finna swap it into my coupe but i also want to build it but i dont want to go to crazy any suggestions on a good badass not to crazy build? Im sorry im 2 years late😂

[@cn8484]

Hey Jon love your channel dude huge fan. I'm building a tube chassis 89 fox. First car build for the track. This will be my first engine build I'm going tye route of junk yard 5.3 single turbo trying to do budget build what do you recommend for parts ect to get into the 1500 hp range any info would be greatly appreciated thanks Jon

[@RealLife73]

Hey John, what’s the name of the wheel “Joey Bag o’ donuts” was using to clean up that deck surface, I’d like to get one of those?

[@LawrenceMGaliano]

3M Scotch Brite Roloc Bristle Disc. they come in different colors that are different grits.

[@reallybadaim118]

Hey just use an insert on the crank. It's all good.

[@johnburke7377]

hey guys i have a gen4 5.3 that i want to build a single 80mm turbo to go into a 94 sonoma ive never built a turbo motor

[@bobgreene5460]

Gotta keep the Ranger, how else do the gapporonni's get delivered???

[@walasiewicz]

What's wrong with using a scotch brite Pad as long as you know how to use it and dont dig in

[@johnvincent205]

Hey man I'm from Greenville North Carolina I'm thinking about doing a ls swapped on my 97 S10 I like your videos

[@otislopez33]

What's the cam size

[@MountainLife86]

Holy shit yall.... Just spraying copper paint through the air with all those cars in there. I would hate to be your customer with my car in that shop.

[@michaelwise9656]

Where you guys located at?

[@jasoncasey5ify]

Whats best 6.2 or 6.0

[@dimetriroberts5873]

What's up with the box

[@jeremyeubanks2387]

Are those oem pistons?

[@draggoneperformancetv1198]

It's funny people think it would hold up. Squirrel tune runs 7s with a stock bottom end 4.8l 2years and it's still living.

[@smokyblackjacket7215]

My biggest question and concern is what transmission can hold that much horsepower because I was gonna do it but the transmission is concerning

[@bigpermsgarage6290]

A built 4L80?

[@dynamicdopamine]

so I definitely have a question.... around the 18 minute and 50 second mark you said you do not recommend running ls9 gaskets on a 5.3? That is what is on my 5.3L ... so I was told? The motor was built when I bought the car. I'm just wondering how come it's not a good idea to put that combination together? Is it a bad seal? I've got 243 heads on a 5.3 and I'm about 99.9% sure it is a gen 3 5.3. It has a tick polluter V2 stage 3 cam

[@dynamicdopamine]

I'm just asking because I honestly do not know. I've had nothing but Mustangs with 351 Windsor swap and mainly Fox body cars and a few sn95 cars. So I'm definitely in the learning process whenever it comes to LS style engines on what is good and what is not and what will work and what will not. I know my engine has ARP head bolts. So that's got to be pretty decent. It has a 102 fast intake ,102 Nick Williams throttle body and 80lb Deka injectors. It is a iron block. I'm trying to figure out what size turbo to go with. Because once I get my house done, I am going to start buying a few parts here and there until I've got my turbo kit completed. But I really plain on finding a 6.0 and dropping it off at tkm to get it Top Fuel hooped

[@slo_5.0h49]

@@dynamicdopamine Best advice....go back to Ford stuff lol!

[@hatedonalot9080]

So you don't degree your cam?

[@megatron1091]

Hopefully it works. Thanks for the content. And my black sheep shirt is killer!!!!

[@shawnb215]

are yall hirin? im a good sweeper

[@mikehardeman6875]

Don’t give the truck away it’s the perfect parts truck and do anything vehicle. If you wanna drive something that you don’t necessarily care about that much if it breaks, the truck is the best option for that!!!

[@raythomasson8660]

Is it ok, non turbo?

[@Indonesia01ian]

Hi. I newly interest with automotive I am amaze with your buildm congrats 👍 By the way. I still don't really get a point. Why some engine could go up to 500++ hp some other just below it. Even with higher CC

[@terrychavis8340]

Where are you located?

[@larrymungin9992]

What’s your address to your shop.. I would like for you to build me a Ls junkyard built 6.0 with a 480le transmission to make a 1000plus hp..

[@LEXLUTHER66666]

Yes Please on the giveaway! The ranger reminds me of Joy from My Name is Earl shes a good time but I know you can do better. Its like John is cheating on the Cow with trailer park queen lol.

[@williamstamper442]

Great analogy!

[@charleybetts1053]

@27:15 you need to use *Phil's* face for ALL thumbnails *&* make memes out of it!!!!!

[@mptorecon]

What pistons are those? Great video btw!

[@Gamerboy-gy1rl]

How much was the whole build

[@hypohj388]

Whats the cam specs?

[@MrRandy3504]

It self adjusts ign timing not mechanical timing

[@walasiewicz]

I can't believe you guys are spraying that crap on the head gaskets! Lol

[@goader190]

That copper spray is the shit I always use it

[@lalipop241]

I respect these guys because they do have a lot of experience with ls but god damn when I see a shop with parts and tools everyhere,it drives me crazy. If our shop was like that I would stop everyone and make them clean. I can't stand to rebuild a transmission or a diff when there is no order. Even myself I get messy sometimes so I take 5 minutes to clean everything

[@williamstamper442]

...you said in the opening... Without quoting direct you said you can take the same power adder (while pointing to the 'sheeps turbo which made 2300+ down track) and will make the same power on the junkyard motor all day long....BUT might blow the backend out the junk first pass. I know exactly what you mean and say, but many people on here may not have the experience or knowledge to interpret them opening comments correctly. Love the show, just sayin.

[@michealwriska2920]

Summit racing has everything in stock

[@chrisgable8408]

Love the channel

[@bennyboom63]

Any Salty Chicken updates?

[@JohnDoc]

Coming soon

[@chadallen7914]

Looks like the cow is going to have a copper bumper soon. Lol

[@kygunfulkerson6897]

Ya love you man

[@ronaldcoleman9969]

It's going to go or blow, either way John's going to send it..

[@stevem8128]

Good video thanks!

[@chaley9093]

If you have it apart. Why would you not put new bearing and rings???????????????????????????????????????????????????????????

[@HISS2004]

I need that ls nasty ranger lamb cammed ranger in my life as a daily.

[@CraaaigV302]

Logan tearin them heads the hell up with that wiz wheel lmmfao

[@slo_5.0h49]

It was rubber

[@rocketmanroy]

whats the cam specs

[@brianlawrence9493]

Cam specs?

[@grahamerosewarne8864]

Keepin it real Jon. Would love to get a t shirt but not sending to Australia. That's slack lol

[@drefrom91]

That copper spay is a poor mans tkm top fuel hoop😂😂

[@jamesaustin4044]

Hope y'all cleaned the threads out.

[@sykwookiee]

What's up with the bums rush tour of the chopper?

[@ricknichol2288]

What size gap are your rings

[@trentdawg2832]

Can u use meth on a n/a setup, or is it only for boost???

[@brandonmurray4895]

Trent robey yes sir. They makes them just like a no’s kit

[@derrickbasenberg8568]

I know you dont like comments on what to do from us viewers but I think most ls guys that know what there doing will tell you to gap those rings butt not trying to tell you how or what to do lsnasty to the front

[@jacksmiththeboss]

KZbin's Richard Holdener made 1140 hp on an engine Dyno with a ring gapped stock bottom end lq4.

[@s2upid]

Was over 1500. Twin S475s

[@joewallace2021]

WOW!!!

[@michaelungerank2470]

You giveaway that ranger and I’ll give it a good home 🤗 ❤️

[@brockdaboi5151]

Keep it and do a really good drag build

[@-g-lock813]

#wewin ls nasty to the front

[@paullane7489]

Give the ranger away but make a 9.5” deck nasty shirt first. I’ll buy a 9.5 deck nasty t shirt for a chance to win the ranger. Chris needs to get TKM to build an ultimate 9.5” deck SBF for the Bad Apple too.

[@-g-lock813]

2 in a day my homie

[@antprice2012]

Send it!