Building a 60mph Emoped in 15 Minutes

[@budwhite9781]

This is a fantastic idea. Really appreciate your skill set. People like you are going to really push the boundaries on what these personal electric vehicles can do. Cheers.

[@furbsherbs9784]

Nice video! I have one advice never drill with gloves on if the drill caught the glove youre fingers will be gone.

[@丨匚卄匚几]

Gloves are not protecting you anyway when using a drill but I guess we are all just assuming that "gloves + goggles = protected"

[@christianlipani8956]

Very impress , very good tutorial and very very good job 👏👏👍🙏 Keep doing it ,we need people’s like you 👍🙏

[@BrandonRico]

This design was beautifully executed. Best looking eBike I've seen so far. This could definitely rival Onyx

[@DirtbagHistory]

You my friend, are a wizard.

[@ELECTRICMOPEDEMPORIUM]

Dee Takos thanks man! 😎

[@jordanmasse2954]

Your a wizard Harry ahahah

[@hurryupnbuy]

Good stuff! I’m glad my initial tank design is working well for ya!

[@ELECTRICMOPEDEMPORIUM]

Jason Chang yes man I love it! You will always be an EME OG! 😎

[@hurryupnbuy]

@@ELECTRICMOPEDEMPORIUM thank you sir! the new kits are lookin' 🔥

[@GamingwithKentuckianJD]

Very nice. My son is wanting a Ebike for his first vehicle to travel to and from work. He is pushing around the 250lb range and is still growing he just was 6ft 2 last time i checked... I swear growing taller daily. Do not know if he will continue wanting one but dang i love your work.

[@winworkssystem2968]

Clean fast sleek wonderfully strong simple unique awesome awesomeness truly great work. Just woww

[@-iIIiiiiiIiiiiIIIiiIi-]

Love what you're doing man! Just make it!

[@MrDrMeow]

I bought the bike for 6k it showed up broken and pieces and welded like a toddler. Took a 4k loss on it. This dude is a snake. I complained about the shipping and he blocked me

[@mohdsabreeyacob348]

Great video and very intelligent 👍, keep it up a hard work brother. From Malaysia 🇲🇾

[@panasonicchrome7915]

Good Video 👍 Lots of inspiration you get thank you 😎👍 I have old bike and i looking for do something like this 😎

[@qonthescreen]

You sir have earned yourself a sub 👍🏼

[@wavebicycles]

You might want to use 2 bolts to secure the hub motor axle torque plate. Reason bring, accelerating and regen braking will rock the axle back and forth, over time the axle nut might loosen. Worst case scenario, is that the rocking motion will spread your dropouts apart.

[@wavebicycles]

Otherwise, clean build and great video.

[@NightKidBrandon]

Awesome content, I’m trying to build a cafe style e racer but I don’t know where to start. I started looking at good bicycles but realized they don’t have the proper geometry for that cafe style. So I’ve been looking into moped frames, which brought me to your channel!

[@rolandthethompsongunner64]

Find an old motorcycle frame and suspension.

[@biff1tannen]

This is a very good video. Want to do this on my 1996 Suzuki TS50X moped🤩

[@teslafudge1585]

Way to stick with it. No posts in so long had us worried. 🙌

[@ELECTRICMOPEDEMPORIUM]

Tesla Fudge I’m so backed up on content, I’ve got so much to show you new video dropping in the next week or so

[@teslafudge1585]

@@ELECTRICMOPEDEMPORIUM 🏍f yes

[@LifeWithStiel]

Bro this is epic!!

[@Luiblonc]

Nice work on that moped!

[@Mr.BreakEven]

Man I just bought and ariel rider and love it but this is on another level

[@LordOfSilense]

Not even 2 minutes in and I need more hands to count to the OSHA regs being violated. Love it

[@RealDystopianFrog]

Leave him alone about that stupid crap the government can kiss my behind, people like to be able to get around let the people decide not the government if they think something safe or not

[@harwoods11]

Common sense 👍

[@teru797]

SHHhhh!!!

[@LordOfSilense]

@@RealDystopianFrog You okay dude? OSHA is like, the bare minimum safety standard to not hurt yourself. Chill

[@schinslam2358]

This is amazing! It looks so sleek. Is it possible to buy one of those pedal brackets? I am doing a EV build for my Jawa Stella.

[@perrymickle424]

super nice bike, beautiful to look at, and fast ass hell. The only thing I shudder at is the price tag, which im sure is a lot...But worth every penny to someone who could afford it. HANdmade ebike.

[@fwefhwe4232]

great videos, love from India !

[@betol7373]

60mph!! Take my money!!!! I wanna buy one!!

[@ELECTRICMOPEDEMPORIUM]

BETO L hmu on Instagram!

[@betol7373]

@@ELECTRICMOPEDEMPORIUM Yes I sent you a message 👍👍

[@colinwhite144]

Abserlutley great. I like the way everything falls in place. I have one problem bike should be a bit bigger. So it looks uniform with riders. Cause every one are different sizes. So I think that should done in codsration with size. Great stuff. Every time I come on to utube I see different ways to build a electric bike. There are so many clever people on planet earth keep up the good work people who probably at this moment are designing eletric bikes. I wish I was younger I've got some great ideas but haven't got the tools or health. Health is the main thing in life

[@sourabhdewasi6071]

Nice project 👍

[@Novias_Moped]

Love it, heard you on a podcast and have been waiting to see more from you. Would love a kit for a puch!

[@ELECTRICMOPEDEMPORIUM]

alan noviasky puch maxi and magnum kits are being developed right now!

[@gerardogama120769]

@@ELECTRICMOPEDEMPORIUM I need one frame! Price including shipping costs to Chicago?

[@ELECTRICMOPEDEMPORIUM]

Gerardo Gama do you need it modified for electric or just a stock frame? I sell modified frames but I don’t sell them stock. EBay does. I do sell converted ones hmu on Instagram

[@sailingshadowfax7518]

Still making videos and conversions? Theses are SICK brother!

[@atan7260]

this is brilliant!

[@Magnacorpanicous]

Beautiful design it looks like the batteries going to rattle around inside the tank and when it rains water can get in through the lid will you maybe also have heat problems with that shrink wrap around the battery eventually.

[@joeows6537]

Bravo Maestro!

[@Родаковскийютубер]

Super bike!

[@harwoods11]

This would be excellent in UK especially using the older mopeds because they have no road tax or mot liability and are registered for road use. Legally 👍👍😎😎

[@TODOESTACONSUMADO]

Congratulations, nice video 👍👌

[@ELECTRICMOPEDEMPORIUM]

Jorge Rodriguez thanks!

[@OperationEndGame]

Beautiful. Can you make one peg-only variant (non pedal)?

[@sourabhdewasi6071]

Please give conversion kit buying link in description and other information

[@thomaswills2301]

How are these kits coming along? Are they ready to be purchased yet?

[@ahmarrana9732]

Nice job

[@joelresto.juuntitledgtuu4i435]

Looks like we live in the same area. Anyway I can test drive one of your emopeds? Would like to know prices on your products. Thanks and great video!

[@KhanMarib]

Hey brother can you please share the link from where i can buy motor battery pack and controller 🙏

[@theunsteadysteader]

Well Jay, it appears you are following uncle oo-ee pretty close. You bout ready to get your matching haircut?????? Love you!!!

[@Revelationfulfilled]

Amazing brother!! Please how do I put in an order?

[@AMXM-do5kw]

5kw hub motor = 6.6 H.Power. Its like 50cc 2stroke engine with the same 6 hp. P. S great build, I love it!

[@ELECTRICMOPEDEMPORIUM]

That’s true! And much much more torque!

[@Zackb347]

where can the electronic components be purchased? motor, controller

[@jojogonjalves4137]

Still don't understood, how did you got the body frame?????

[@Dlorenzo680]

This is awesome 🔥🔥🔥🔥

[@theoriginalmungaman]

No crank bearings? No swing arm bushings?

[@patrickseffinga]

can you do this again but with keeping the tomos look like a tomos?

[@tacostwowheels4934]

Cool video! Keep up the good work

[@jmez927]

Rats nest is rhe only flaw. Huck cycles places the wiring under the seat. As far as looks and performance...this is top notch

[@Tidges01]

Can you link the hub motor ?

[@theoriginalmungaman]

The crank centerline should be the same as the swing arm pivot!

[@relectric720]

Thank you for the video. Are you using a flux core or mig welder.

[@robbaube7249]

Do you build your own battery as well or is that part of the kit you get with the motor and controller assembly?

[@BuildProne]

dude did you not put bearings or bushings inthe swingarm?

[@profilmwork]

how much? and where ?

[@mikegarner5576]

I would love to know the kit you used for motor and controls. I have 10 old tomos mopeds and plenty of parts to do this. Very tired of the unreliability of kitting the bikes to get 45.

[@therealracer135]

He mentions all those in the last minute or two

[@Webbsy]

Hi that crank/peddle bracket is really nice. Do you still sell them?

[@Webbsy]

Or the whole kit?

[@EnhancedNightmare]

How is the heat build-up in the battery? No problems with that? Also I would think about some chain guards because you could chip paint with slapping chain.

[@antonclaeys]

Can you share a bit more about the parts you are using? And the range you're getting with that battery pack

[@robieosborne7369]

What battery/motor kit is being used here?

[@balloney2175]

Did you mention the capacity of the battery you used?

[@PistonsProps]

Any idea what kind of range you’re seeing? This thing has some power.

[@bigd1714]

Can and I and where can I order the parts? I want to build one of theese

[@DetroitMicroSound]

I wonder what one for a Kromag Puch Pinto 2 or Swinger 2 might look.... with a box containing all of the electronics, and cells, that's basically a pod styled like the original fuel tank, and maybe clamp mounted to the tube frame inside the step thru area, leaving the original tank in place, but using it as a storage area for gloves, goggles........ a few beers...make it weather-tight.....add a little salt water and ice........ 😄

[@johngalt7313]

I vote for Jawa-style swingarm with concentric pedal shaft in the pivot, for your next refinement.

[@alanmclenon9703]

I have a couple General Mopeds I would like to convert, do you sell kits for these? I really don't need all the brackets and swing arms, I can fabricate stuff like that just the Electric specific stuff (motor, controller, throttle, battery)

[@favor8194]

Nice work.......

[@davidmoore9385]

Does it need the pedals or can it run without ?

[@Sharrieftv]

I need one of your builds rt now im riding a rad ebike

[@bfprecords]

This is incredible. How many miles does it go on a full charge?

[@Rogue_1987]

When can i buy one.

[@jonward2404]

Hell yeah I'll pay 4000 500 for 1 of these I love his idea I don't know what his price would be but I'm loving it and I would buy one I live in Washington not DC

[@jonward2404]

I can't find where to buy one and yours

[@igordewit7357]

Cool stuff...A smart businessman would scan the custom parts in CAD or something,so they can be machined by the time you get tired of making them by hand(after twenty times or so,doing the exactly same thing again and again,you ll probably get my drift😁) But i get it,dude.. i am exactly the same way,and keep using my hands rather than using computers .Thats why i am pretty much broke🤔😁! But that oldskool look on modern electric powered bikes?GREAT STUFF...And it recycles old shit:always a sensible way of making new things....right? Like your vids,thanks for posting!! Best wishes,from the Netherlands!!.✌🤖🍹👏👏..keep up the good work!!

[@radicalgames9256]

In case anyone is interested, you can find longer forks that'll fit on a tomos targa moped on Treatland.tv excellent service 👌

[@joedelarosa115]

Do you have any kit for puch magnum moped?

[@whatis4566]

where do we buy the kit? And when is the next vid?

[@slowestjabroni]

what kit is this?

[@Dmlowe1969]

Do you make custom bikes for sale?

[@robieosborne7369]

Yoooooo. I got a puch frame. How much for you to turn it into something bad ass?

[@YTSparty]

That's great. Do you have a conversion solution for around $500? I mean for that much work and money, why not just buy a eMotorcycle?

[@rhysezfpv]

It looks weird to me owning a DH stealth Ebike. But nice clean build. I would ride it.

[@BigKrisMorris]

Your voice sounds so familiar. *edit you sound like that guy that makes the cocktails on KZbin! Lol

[@jbuilds1]

Are you selling any part of this? If I need a swingarm?

[@ashleyhetman9495]

badass

[@cedricmeynen4431]

What is the range of this moped?

[@dustinperez5341]

How much did the entire build put you bak

[@benmedhurst3043]

Would you ship to the UK? Where can I order ...

[@freakenstein1984]

Do you sell complete bikes

[@SinisterAngel1]

It's a beast!

[@jfcustomguitars9276]

How much and were can I get the kit

[@matthewdanielsiskin]

link to that XLR charging port?

[@thelifeofgautham]

Could you help me to convert my Enfield mofa like this? Where do I get this kit

[@ELECTRICMOPEDEMPORIUM]

THANI ORUVAN hmu on Instagram @emporiumelectricmoped

[@joejojo4751]

Will you be doing a kit for the Peugeot 103 mopeds?

[@its_never_sunny_in_seattle]

How much for a Bike? i live in Seattle with no tools or a way to even begin to do what you do however im willing to cop one!!!!!!

[@Snakes_N_Crafts]

I love your mopeds dude, but that pedal situation hurt me, lol.

[@forwardmotionstowing7503]

Where do I buy your targa kit? Pricing?

[@mattkennedy1625]

Looks like you’re in my old hometown of St. Pete.

[@NormanWray-hi8cu]

Hello dear friends you are back on the street again.😅😊