Building a 7,000W DIY Electric Mini Bike

[@stefanf6495]

Blessed those living in a country where you are actually allowed to use your skills like that. And not choked by regulations.

[@raimondsstokmanis1892]

Yea, germany comes to mind.

[@datsun7023]

​@@raimondsstokmanis1892are you not allowed to do things like this in Germany?

[@raimondsstokmanis1892]

​@@datsun7023 No there's wat and speed limitations. If you have a certain license, fastest/bestest you can get , is like a 500w motor, and top speed of 45kmh. Anything above that , and you will be fined. Not to even mention the bikes need certain certificates etc etc.

[@user3wx9V-178]

@@raimondsstokmanis1892the US has a limit of 750 watts and 28 mph, with pedal assist. with a throttle it's 750 watts and 18 mph. anything more than that and it needs registration. technically the bike in this video is illegal in the US and needs to be registered.

[@raimondsstokmanis1892]

@@user3wx9V-178 Dude still, all that without any registration. You guys have it good there.

[@Dr.BorisInShambles9518]

Don’t do cocaine kids. Also that’s a really clean build

[@NawHomee]

The Twitchy Ghost rider😅 I've definitely seen a couple guys like that.

[@oatmeal710]

what if my dentist prescribes it?

[@MMM_toasty]

@@oatmeal710 then you should shove your toothbrush up their a-

[@guyww8516]

You must be doing cocaine if you think this is a clean build

[@Drift_Axolotl]

I love that the entire thing is explained in one video

[@DIYesk8Builders]

Thanks!

[@mrwow1667]

i don’t think i would want it split up in the first place

[@Drift_Axolotl]

@@mrwow1667 that’s what I said?

[@aussiekai]

That’s really really cool!

[@DIYesk8Builders]

Thank you!

[@ActivateMission2ThisTimeline]

U need battery cooling. Hope you don't go into thermal runaway😮😮😮.

[@darkhunter777]

По автономности работы он проедет не дальше чем велосипед, поэтому нет смысла на это замарачиваться. И педали крутить полезно для здоровья

[@ShouldaWaved]

​@@darkhunter777if I had to choose ebike or bicycle without motor and could only pick 1 , ide pick without motor, but I still want an ebike very badly, the bicycle is the coolest invention leg power bodyweight, I just want a battery I can charge like a dynamo as I pedal

[@darkhunter777]

@@ShouldaWaved Cars powered by an electric motor have a large mass, while they lose competition from internal combustion engines. When they invent lightweight batteries, then it will be different

[@Blackshadowguy]

This guy could explain history of world in 60 minutes

[@longnosepete3491]

it's already been explained so perfectly well in 19 minutes 25 seconds though.

[@-Sean_]

​@@longnosepete3491the sun is a deadly laser

[@asta-bird18]

Lol

[@zrix9053]

Gives me a headache

[@noahlapuz3853]

He already did, and it was electrifying!

[@bigwokethesmoke]

I can’t believe you built that in 60 seconds!

[@DIYesk8Builders]

It was a mad dash to finish on time

[@zatomlzxzanamolzy1253]

Look how fast his hands move, I'm not surprised. Sometimes, you can't even see it until it just appears somewhere else. Look how fast he grabbed that throttle and fitted it 😮

[@liamm.26]

@@zatomlzxzanamolzy1253💀😭

[@burnedfrys1556]

@@zatomlzxzanamolzy1253 it was more then 60 seconds

[@joewoodchuck3824]

This strongly resembles a gas minibike I built from scratch many years ago. I used plumbing pipe for a frame and it was rather heavy. I needed to register it because of the engine size I used. I had a lot of fun with it. It hadn't occurred to me to build an electric version until seeing this. Nice work. It's strange that individual states regulate gas engine sizes for scooters and bicycle conversions but don't regulate electric motor sizes at all. I wonder why you spent the extra money on a gasketed battery box when the cable entrances aren't sealed.

[@wildmanstudios6534]

That's actually NOT true at all. I live in Florida and every class of electric vehicle has a section of the law pertaining to it. The list includes: e-bike, stand-up e-scooters, e-mopeds, e-motorcycles, and yes electric cars that are also subject to laws.

[@joewoodchuck3824]

@wildmanstudios6534 OK. Well that's one state that does something, though the extent of the vehicle class laws isn't stated.

[@harrisonford7106]

“Hop on Lloyd, I can get more than 90 to the gallon on this hog. I swapped her for the dog car” 😂

[@ED-uk2jf]

I'm part way through building my own electric bike and just saw this

[@lyteyearz5810]

How did it turn out bud?

[@ED-uk2jf]

@lyteyearz5810 Thanks for asking. The frame went fine, but the only motor I had available was not powerful enough. I plan on sorting it in the future, but at the moment, it's just a decoration.

[@youssefnr1310]

​@@ED-uk2jfgood luck man!

[@Dururjrirnedn]

Don't give up on it you got this​@@ED-uk2jf

[@Baergaming-ts9cx]

@@ED-uk2jf if you still want to, it might be too expensive but i recommend a electro and co kit. the best one would be the extreme 11,000w kit

[@Pathfinderxr]

looked solid around that corner 👌 😬

[@khoifesh642]

If you guys didn’t know, that frame kit he mentioned that was from the 60s is a Azusa frame. Very nice and vintage frame

[@DIYesk8Builders]

Yes! Awesome frame

[@rodgeryoung9218]

​@@DIYesk8BuildersJC 7000 w only does 35 mph 🤔

[@reekz1568]

Mass production is necessary for this. I’d buy one

[@DIYesk8Builders]

Soon....

[@chevyfeltz8788]

@@DIYesk8Buildershow we feeling 2 months later 😂?😢

[@waffleboy4276]

​@@DIYesk8Builders how y feeling 4 months later 😊

[@dmosboss758]

how much would it be?$$

[@tsvetaraykorasheva2424]

​@@dmosboss758 all counted it'd prolly be about 1500 bucks if globalised by himself. If all parts and service comes from the grandfather of cheap production, China, it'd be about 600.

[@MrSirDoofus]

Bro’s naming everything he uses like we’re gonna build it

[@Blackshadowguy]

@@MrSirDoofus 😆

[@NoHairRedBeard]

The build is absolutely awesome ❤ The welds are....... questionable 😅

[@DIYesk8Builders]

Fair enough! haha

[@rafaelramos2299]

@@DIYesk8Buildersgreat job brother

[@stevezack6077]

You dont have to be a good welder just a good grinder

[@NoHairRedBeard]

@@stevezack6077 stress cracks disagree with you.

[@feelincrispy7053]

Now that’s a project I can get around. I like KZbin projects that viewers could easily and affordably attempt

[@gribboffroad6963]

bot...

[@ButterfatFarms]

If you are going to design and build your own electric mini bike why would you put the battery and the bikes cg that high?

[@2bit2strokes38]

I think because bigger is better is usually the motto. And also go big or go home can also apply in this situation😅

[@2bit2strokes38]

I have a 1970 Sears and Roebuck mini bike did I put a 125cc that's modified on it that's a 4-speed and I've only had the balls to get it to around 60 to 65 mph. I'm worse than this guy

[@rsz90182]

Whats great about these builds is that you can actually have a machine that can take you places and you can store it inside your home without the fuel fumes.

[@je7647]

id use a qs165v2 or qs138 90h v3 for the motor and a bac 8000 for the controller if youre going to run a battery like that theres a lot of power youre not using whats the max amp on the bms you're using? awesome bike btw

[@DIYesk8Builders]

Thanks! BMS bypassed for discharge. Max current is set to 80A in VESC tool from battery

[@highgatehandyman6479]

They are amazing. It's quick surprising how long those batteries last. It's basically a giant cordless drill

[@Ashxdono]

Crazy how bent metal can still have enough integrity to be able to hold place and weight!

[@ninjarooster9258]

The bend is what gives it strength.

[@Gaming-Out-There]

When I'll be older, like 20-25 years old, I'M SO MAKING THAT

[@2000freefuel]

I was about to say there is enough room to install a range extender (battery charger generator)

[@Doggo_Bork]

The motor and controller support regen braking. No point in adding additional resistance to the driveline.

[@ShouldaWaved]

I love it. Used to push one like it up the mountain roads and coast down, no motor

[@DIYesk8Builders]

Awesome!

[@mahmodaltmimy256]

Who else thought about 7 days to die?

[@sonairys929]

Caught red-handed)

[@mosta5]

It would be better to mount the ESC outside the box for better cooling also the heat from the ESC itself could damage the battery pack if it's close

[@thefirehawk1495]

That power output is enough to go about 65 miles per hour so gear the thing properly and get better mileage at the same speed and also more speed when you need it.

[@nothoughtsheadempty6220]

Needs a bigger battery to sustain those speeds. Power is no problem, but ~730 Wh is not enough to do anything other than a quick lap around a parking lot with that power.

[@XNoUs3r]

if you changed the rear gear into a smaller one it could go faster

[@DIYesk8Builders]

Definitely possible!

[@XNoUs3r]

@@DIYesk8Builderswould like to see it happen!

[@Saifan338]

Aint no one buliding that buddy

[@redsealjourneymanreviews6647]

Let’s go into production

[@alexcathey4165]

That box is going to leak like a sieve put caulk around the areas that you drilled so it doesn’t leak and ruin your battery

[@User94827Z.]

35mph? What battery are you using that seems underpowered for 7000w

[@helpmemommy9804]

just needs a smaller rear sprocket

[@REDELECTRIC15]

Nah use a my1020 motor trust

[@nothoughtsheadempty6220]

May be the tuning. Otherwise anything faster would eat up the

[@robinlehnerd1475]

I built a little bike that goes about the same speed with only 2000w and it takes off really quickly too.

[@berlnberln5289]

He is using a small outruner, those are low torque high rpm, you can't reduce the gear ratio enough to get in the powerband

[@denimjez]

Almost dragging that rear sprocket when turning. Maybe up that tire pressure or change the tire to something with a stiffer sidewall if you can go larger. Unless it’s just the camera angle

[@AbrahamMast]

Amazing! How does the battery do with heat?

[@DIYesk8Builders]

The battery does fine. It's the ESC that tends to overheat. Currently working on an upgrade with a heatsink!

[@Glumacubarley]

Cool! The motor might be rated for 7kw, but it might overheat at higher currents than 50 amps...i have a bldc motor 2 times bigger which is rated for 3 kw... doesn't matter...i like your invention!

[@Xytro3749]

7,000W ❌ 7kw ✅

[@Myst-ic]

Who’s gonna be the one to tell him that that’s a razor rambler 12 frame(no hate though)😀

[@WeAreInYourWall]

Absolute legend.

[@PaulWestcott-in8cv]

May you please list all the parts used, motor, controller anb battery. Thank you Very good bike.

[@bdvr]

7kw for 30 miles an ours is lacking you did somthing wrong im planning on upgrading my bike to 2000 watts and its suppost to go 35

[@nakoda1610]

probbly wrong ratios, it doesnt have the torque to make him go >30

[@bdvr]

@@nakoda1610 prob low volts high amps so like 200 miles range or some wild shit

[@Vmaxfodder]

His battery can do 30-35mph . ,but that range is sus! . I made a 40kw ( 40,000watts) footscooter. But it's 24s 16p monster scooter with samsung 50s . With 2 660 amp fardriver nd84530s . 7000wh

[@rory.projects]

My bike has 750W motor. Top speed is 55kmh. Keep it at 45kmh and pedalling and my range is about 70km

[@bdvr]

@@rory.projects is the tourqe in the negatives god damn i got 650w and it goes 20mph or abt 32 kmh

[@C.D.J.Burton]

Either silicon seal the wires into their casings or use rubber grommets just to be safe. Perhaps add a tiny hole into the bottom of the case to free any condensation which might accumulate. But also, perhaps use a fire proof container for the battery, if it's lithium. I'm being extreme. The bike is epic in any case, inspiration!

[@DIYesk8Builders]

Great ideas! Thanks

[@Eduardo_Espinoza]

That's a dream bike right there.

[@benefactionhindrance]

That’s sad

[@zbillmobile]

На кочке уже будет полёт мечты

[@nuningyudhahesti3194]

Woah...thats AWESOME!! but uh probably used for roads cuz theres no suspension but its still *_AWESOME_*

[@AegisHyperon]

Would be classified as a moped here due to the lack of pedals meaning it needs to be registered and licenced

[@DIYesk8Builders]

Yes unfortunately

[@Bmg009]

Some folks just need to reevaluate their welding skills.

[@DIYesk8Builders]

Can't argue with that one

[@Bmg009]

@ lol I’m just messing with u bud. It don’t matter what it looks like if it holds.

[@coltonkirkman8714]

15/70 gear ratio for 7kw or 9.5hp and you only got 22mph??? You should be getting at least double. Try a 18/65. I have a built Briggs 5hp on a vintage mini bike with a 18/65 gear ratio it goes 65mph and it makes ~7200rpm. I usually use a formula to calculate top speed.(Rpm/ratio x Wheel D x 3.14 /12 /5280 x60) hope that helps.

[@DIYesk8Builders]

35 MPH top speed. motor is not nearing max power

[@Zevose]

Where did you get 22 mph from

[@2462bf2]

It's because that's nowhere near 7000w. I reckon it's not even running 700w 😂

[@abc-ed1nr]

Got links to those parts?

[@jakecreel8144]

Needs a 212 carbureted engine and it would be a lot cooler😂 ❤

[@user-mz6sh4uo7u]

I wonder if theres a way to change the throttle to a switch/button.

[@randomedits1370]

You should start selling them

[@Th3man12]

you need a 7kw controller and a high discharge battery that's able to put out the needed power for it to be 7kw. the motor is just rated for 7kw

[@DIYesk8Builders]

Precisely

[@Tejfol]

you guys might not be able to do alot of things in america but doing that is true freedom

[@iBJR01]

Suspension: your back.😂😂😂

[@petevenuti7355]

ESC... I'm as broke as dirt, I got a selection of 18650 batteries and motors from other peoples garbage.. but no free esc's, how can I build one or where is a good scrap source for an esc appropriate for a bike, like about 7kw with regeneration or something?

[@DIYesk8Builders]

The ESC is probably the one part not to try and cut corners on. There are some cheaper ones out there, but they tend to break easily.

[@petevenuti7355]

@@DIYesk8Builders I agree, that's why I don't have one yet. And if it had regeneration ability and it didn't work right it could blow up the whole battery pack with me sitting on it! There's got to be some source for a motor controller that's at least possible to get. If it takes me a year to save up $100-$200 bucks, I know I ain't getting one for $20, and I'll never afford one in the thousands. I'm practically crippled and can't walk to town, the typical e-bike that that I can't even afford used won't get up my driveway, it's to steep, I got no driver's license, nobody to give me a ride, no nearby public transportation , and I'm not quite crippled enough for the insurance to give me a electric wheelchair...

[@devilemperor6668]

When You know You can enjoy your life without having a GF , this is the Best thing to ride with friends & go camping... Thanks alots bro for making this Really Cool & Fun Mini E -Bike... Loved It , Keep Up This Good Work , Always be safe while making such Great Masterpiece & while Riding... GOD bless You & Your Family...

[@DIYesk8Builders]

Thanks!

[@randomthings1110]

Whats the price of it

[@gallaghergreen2053]

This tells you just how powerful RC planes are with a motor like this spinning the prop. LOL

[@RhetoricalMuse]

Power is the wrong word here. Power is speed x torque. Given the size of the motor and the low speed (35mph), I'd say this is anything but powerful. To give in example, my bike is much heavier only 350w hub motor, and goes 22mph.

[@gallaghergreen2053]

@@RhetoricalMuse Yes, you are right. :) Motors have gotten so impressive

[@ViktorColovic]

Respect for this man

[@s3v842]

can we get a parts list maybe with links PLEASE

[@2Xduo1]

nice but my ebox dragster has a 60v and goes 45, 0-30 in 4 seconds

[@AM2PMReviews]

Now I’m wondering if it would be more efficient with bigger wheels.

[@dharmabliss867]

what was the cost of the full build

[@journeyquest1]

In next episode. Watch as the lithium battery explodes and i get an instant enema.

[@ROCKKILLSPOP]

Messed up the settings on my ebike and it took all day to fix

[@197_toyota_levin]

Can I may ask how much was the engine because I am looking for a good engine for my bike

[@geraldsherwood6174]

That chain needs some kind of housing because it would suck if it broke when you were miles from your destination.

[@DIYesk8Builders]

would be a great addition!

[@voittovellamo9926]

can you link the website you bought the motor and battery from. thanks

[@Uraniumeater207]

How much money was this in total

[@MotivationDaily_T]

What was the final cost?

[@henrylehlbach671]

What is an electric brake?

[@DIYesk8Builders]

The motor provides the braking regeneratively

[@paulwright8378]

That paint on the electrical box will flake off after a couple of weeks, you need to "key" it with Sand paper.

[@Oh-no515]

how many of us just watched it because it was satisfying and ignored the talking and explaining

[@joannastrum]

What’s the cost for this project?

[@sureshotmcgee1085]

If you lose power can you still use the electric brake?

[@DIYesk8Builders]

Depends lol

[@sureshotmcgee1085]

@ I feel ya 🤣 thanks for getting back to me 🫡

[@0GHatMak3r]

Remember The watts of the motor just how much it drains a battery (limited by max amps from the battery) What matters is the torque

[@Christopher-bh4gx]

❤ wats the build cost??

[@Volcanic_has_erupted]

you should swap the front sprocket with the rear

[@DIYesk8Builders]

mega speed

[@bimini1216]

Very interesting. Love this project. Stronger lower voice when narration. Sounds like whispering.

[@Rjjwsn]

How much did it cost? Under 400??

[@jaystricklin3751]

How do you keep the tire from collapsing on that hub motor when you floor it

[@guyappin0]

I watch KZbin videos. You build cool and fast bikes. We're different

[@chlorophyll6154]

Is that DC motor? Brushless or not? How do you handle the heat?

[@DIYesk8Builders]

Brushless motor. Does not get too hot bc it is not running anywhere near 7,000W max

[@dogbog99]

That VESC tool is making crazy things happen I tell you, what a piece of software that is. You can even make single wheel boards like the Onewheel with it

[@DIYesk8Builders]

So versatile! That is why it is great

[@quentingrimes1234]

Add a gearbox and try going 200 and trust me it won't be safe but it will be fun

[@televirn5879]

you should try putting a gas motor on it to make it a plug-in hybrid

[@RaptorGooseGaming]

where can you buy something just like this

[@elbowstrike]

Would you ever just mount the motor directly to the drive wheel or does that mess with the physics?

[@DIYesk8Builders]

The gear reduction yields a lower top speed but more torque

[@MarkStebbins-xx7ee]

I have a question ? Does all the diy stuff is always painted Blue ? Why can't they use other colors, like green, yellow, orange, red, etc ?

[@DIYesk8Builders]

Blue is just our theme

[@MM-op6ti]

When you run out of batteries no brakes?

[@shannonolivas9524]

"First I used a minibike frame from the 60's" Well that skipped a few steps right there didn't it?

[@drew4910]

You guys should create a DIY kit and sell it

[@lilman227]

Yo, just a heads up.. you're limited to a maximum of 6,720 watt for a second or 2 with this setup. If you upgrade to an 18s setup, it'll output a tad over 7kw for a little while. I have the same motor as well

[@DIYesk8Builders]

Looking for an ESC or battery upgrade!

[@WidyaDidya]

How does the temp vary in the sealed box? Does it run warm in there?

[@DIYesk8Builders]

It gets very hot. We are working on a upgrade to have it housing in its own enclosure with a heatsink

[@moshegalimidi2302]

What is that tube bender???????????

[@LANDONNNNNNNN]

swap rear and front sprocket pleaseeee

[@DabMeUp311]

Thank you for the inspiration I built a electron and co 11 kilowatt mini bike that smokes a surron.🎉

[@DIYesk8Builders]

Nice!

[@snailairy]

Would you buy chance have links to these products?

[@elle9040_daman]

“Insane” as if bro 😭 I think my grandma had one of those back in the day

[@2bit2strokes38]

I put a 125cc that's now modified a 140CC ish,with stage 2 cam ,roller rockers, performance push rods and springs. Attached to a semi-auto electric start on an old 1970 Sears and Roebuck droper bird bike and it'll do 70 miles an hour all day but I'm rocking a 16 tooth drive sprocket on the engine, and a 23 tooth on the Wheel, and because of the small wheels only being 11 or 12 in, it's still way too much torque and I always take off in second gear. So I might bump up to a17t engine sprocket. But, I'll admit it's already terrifyingly fast, in addition to being on a small mini bike frame. At least it's 54 years old solid American steel. Probably safer than most newer vehicles lol.

[@mr.commonsense]

Yes, that indeed is a really nice "weld"

[@aTreeHasaBrick]

That large gear on the rear wheel is going to bottom out.