BUILDING A FAST ELECTRIC BIKE FOR $350 / DIY EBIKE #2

THE WORLD'S CHEAPEST E-BIKE BUILD IS HERE!! In this video I put together all of the parts from eBay that I unboxed in the last video to build this awesome 48V 1000W 20AH electric bike!
To watch me unbox and give an overview of all the parts, watch this video: • THE CHEAPEST EBIKE BUI...
eBike kit: www.ebay.com/i...
Battery: www.ebay.com/i...
Buy my stickers!! GoldGuy YT Vinyl: www.ebay.com/i... Built not Bought Sticker: www.ebay.com/i... Glowing Cartoon GoldGuy Sticker: www.ebay.com/i... And click these links: Follow or dm me on instagram @goldguy_official Support my channel for more frequent uploads: Patreon: / goldguy Paypal: www.paypal.me/... Check out my extra parts store on eBay: www.ebay.com/u...
Song: DJ Williams - Sunset Trails

[@Anontesla]

I love this guy” I’ll just throw some zip ties on it for now, remember just for now” if you’ve never said this you need to try it !!! Thanks for the build my brother!!!

[@freelancedentist9480]

This is the first video I watched for building an ebike and now about a year later I built my own, thanks for the inspiration and the guidance man

[@argonxenon6839]

This bike is so precious, her creator spilled blood to make it. 😂😂😂

[@benedicto.050]

No project is worth until some blood is spilled.

[@lonniestutler313]

This bike is a bomb waiting to go off. It is dangerous.

[@jayevans6146]

It’s ok to decent. It’s just that battery that’s an issue.

[@faithsylva4369]

@@jayevans6146 zhedie?in i

[@nebe0719]

@@lonniestutler313 yeah it’s a deathtrap lmao

[@chippsloop1482]

Much respect for helping us lower income guys with a no nonsense tutorial we can make our kids happy building them an e-bike

[@e.s.l5861]

Nice job. I would consider mounting a book rack and a set of soft panniers. keep the control box and battery over the tire right behind you and some extra essential in the panniers. A water resistant plastic ammo can would maybe make a good locking box for the batt and control

[@patcaza6166]

and just to keep this as budget friendly as possible, a crank puller costs less than a box of gauze and a bottle of peroxyde

[@akxsharma]

What for can you explain 😬

[@miguelcelorio7982]

@@akxsharma to install the pedal assist sensor you have to remove the pedal, and you need that tool to do that

[@ngtenthoon1344]

@@akxsharma :

[@alastorclark3492]

What gause and peroxyde?

[@lamarmottedesinternets5134]

@@alastorclark3492 bandage and disinfectant to treat the wound on his hand

[@eggsonlegs6848]

This should be the first video that everyone sees when building an ebike. Bravo!

[@survivingthegreatreset5374]

I’m getting ready to build the SAME exact bike! I bought it by chance in PERFECT condition for $40, then found THIS video which kept me from ditching this bike for a whole different setup at a higher cost. Thanks to this video I now feel 100% confident that I can spend less than $500 and build a 40+Mph e-bike that’s dependable, and can keep me rolling while I save up n build my 5KW Sauron clone Thx for the video! ESP for using THAT exact bike! Wild chances to find this video the day after I bought the bike strictly to convert :) rock on bro! Saw your mid drive video, got me drooling over that low end torque!!

[@theozman38]

It brought much happiness. If you haven’t bleed or busted your knuckles your not wrenching

[@froggersgarage5127]

I agree

[@jveronica812]

If you would have had a bike stand that would have been helpful

[@bigcrackrock]

Yeah I've currently got a nice triangle cut into my middle finger down to the white meat from an allen wrench slipping near the disk break. :)

[@JavierGonzalez-cg5rb]

Goldguy, wanted to thank you for your video, followed your video and built a electric bike just like yours . Would recommend others follow your example. thank you again.

[@Whitty2304]

Nice to see you giving it a good effort and not hiding any of your small hiccups instead of pretending that it was so simple to make even a little to no experience of mechanical background can do it as well. I thought that you are easy to follow instead of polished video so i look at the work and say i can't do it they have a lot of experience but your rawness is refreshing making people realise they are able to do it if willing to put the effort into the project, so congratulations my guy keep pushing forward and I have no doubt that u will go as far as u want to

[@unstoppablezone4980]

Haha...this should be titled "e-bike wreck conversion." I'm impressed with your knowledge and skill. Way to go!

[@DylanFowler]

Brilliant build, and really cheap too. Building a perspex box with air vents will help keep your electronics dry and cool. Congrats, this vid will help many people get started with e bikes.

[@Full_Throttle_no_Brakes]

FYI this motor can take a lot of abuse. You can push 3kw using 72v+ in it no problem... If you ever think about upgrading the bike, the motor is something you don't need to worry about.

[@UsmanKhan-fb2jq]

your talking abt pushing 2kw into a 1000w motor, it would destroy it

[@Full_Throttle_no_Brakes]

@@UsmanKhan-fb2jq no, It won't. Those cheap motors are very much underrated

[@milordas]

@@Full_Throttle_no_Brakes power does not matter, torque rate matter

[@josmty9]

Do you know how much voltage can handle the controller?

[@Full_Throttle_no_Brakes]

@@josmty9 which controller?

[@joshuastrong2398]

It was all good till he put the shifter on the inside

[@superketchupyt2510]

Yea that rly bothered me too

[@brettbennett4369]

yes that was big off!

[@johnrhodes3350]

Breaking is used more than shifting with motor

[@josetapia26]

If he left it how he had it in the start, the levers would be in that sweet spot and he woulnt need to purchase shorty 2 finger levers. I guess he prefers a full 4 finger pull. Im more of a two finger on the levers.

[@KB-gn6rh]

Yeah, cringed me so hard

[@seriouskite]

I'm just a backyard hack. I have a 750 w rear hub motor from a Canadian bike co. Now I'm looking at my flat tire, no seat mountain bike gathering dust. You are inspiring me to make the E conversion. Great vid. I actually said OUCH when punched the sprocket. Excellent How to............Thank-you, liked and Subbed.

[@davedzone]

I just did the 1500 watt with the internal controller (in the hub) and it's SO much cleaner. I hope it lasts. Need to upgrade my battery from 48v 13ah to 52v 20ah but the thing can do about 28 mph as it is with no pedal input. I did discover that it's worth buying the tools for the gear cassette and the crank though.

[@siebehuitema4318]

How far can you ride?

[@davedzone]

@@siebehuitema4318 fully throttle wide open hills and stuff about 18 miles.

[@rmarbertin8131]

So many variables, it's a headache to figure out what to get, but knowing it's possible to do this on a budget is reassuring. Thanks :)

[@CaliforniaBushman]

'Jehugarcia' is an Electrician/KZbinr out of San Marcos, CA who has a ton of EBike batteries of various wattages, voltages, & amperages in bulk for super cheap. He sells 18650 lithium cells in bulk for cheap to do lithium ion battery pack builds, also. I'm getting into electrical big time (broke out the old 12th grade physics textbook even) to learn how to build my own lithium battery packs, and Vanlife Cabin Lithium Solar System builds for my Travel Van (maybe out of 18650's & BMS as well). This EBike Build is my project for this year to get into all of it. This is my new hobby. Then I'll build a custom EBike Teardrop Trailer with a lot of extra lithium capacity, an inverter (for possible Starlink antenna mounted in the Trailer Roof) solar on it & an ECar charge station adapter built into the trailer, to fast charge at Electric Stations on the road, possibly. Maybe do a KZbin Channel on touring across the U.S. with it. Never been so excited to get into a new hobby since I was a kid. Thanks for this video!

[@GoldGuyRides]

Sounds awesome! I would watch those videos 😉

[@nacs]

1:13 That cash register sound effect is like 20X louder than your talking. Great way to blow out people's ear drums (esp if they're using headphones). Rest of the video was good though very informative.

[@sheerpride]

Thanks for the video. I now have the confidence to do my own build. I believe the speed limiting wires are for for European users who are restricted to 250W of power for use on roads without the need for insurance and driving licence.

[@TakexAxStand]

A crank puller would have been a worthy investment also.

[@abraalexander951]

great walkthrough and the comments make this build gold

[@danmcg4363]

At last a genuine everyday diy build that doesn’t spend a few grand on fancy parts to build their bike. I’d personally use disk brakes & maybe a slightly better frame but I really enjoyed your build anyway. Keep it up 👍

[@adrianakuzmikova1697]

will you show how you build your electric bike?

[@victorvannatter312]

Probably because most people wouldn’t trust that battery. I know I wouldn’t

[@pauldonohue7536]

I have watched so many ebike kit videos recently try, amd yours is the only one that's given me the confidence to do the wiring.. You wemt through it slowly explained that it is colour coded, amd amd shown the process. THANK YOU! Now all I need to do it actaully take the plunge and order a kit and a battery. Cheers buddy

[@krisr8442]

Hey thought it was a well planned video. I really like that you included instructions on some basic bike maintenance and terms for people newer to biking. Thanks man! Cool build.

[@ChaplainDaveSparks]

Too many of my "just for now" things end up being semi-permanent.

[@bradferkovich3571]

Great video! As a suggestion for the extra wires, I got this from watching shows like Amercian Choppers, and Overhauln, is that you can rout the excess through the down tube, it cleans up alot of messy wiring issues and it makes the bike look kinda trick

[@codydavidson8315]

What is a downtube?

[@bangcrashtinkle6718]

Great video GoldGuy.. I fitted a 60 ah circuit breaker between my positive battery and the controller. You can turn off the battery before you disconnect it. Stops all the sparking!

[@NiSiochainGanSaoirse]

I've just bought an ebike, a 52v 1000w rear wheel hub and motor, and it sparks damn near every time I connect the charging wire to my battery. Am I damaging anything? And how do I fit this circuit breaker you mentioned?

[@bangcrashtinkle6718]

@@NiSiochainGanSaoirse Hold fire Sir... It's Saturday night and we are all drunk. I will put up a circuit in the nest few days with Amazon link for purchase.. thankyou for your patience.. and YES... you are damaging your connection

[@bangcrashtinkle6718]

@@NiSiochainGanSaoirse Hi Ni Siochain Gan Saoirse - just uploaded a PDF showing my circuit with some photos - hope it helps outdoorsboy.com/wp-content/uploads/2020/10/Making-an-eBike-battery-safe-for-connection.pdf

[@DiggingBuddy]

wow this is a great video, very informative, I feel like I could probably do this myself now. thanks for being so thorough with the walk through

[@martynm.449]

Really enjoyed the video. Nice methodical install. I've got the same kit. Personally, I didn't bother with the supplied brake levers, or the pedal assist. I found it to be so much unnecessary wiring. I manage fine by just applying/letting go of the throttle.

[@kylegoodfield9088]

if you dont have brake levers that cut power to motor in a certain time it makes the bike illegal in even the states with the easiest laws

[@Agilepickleunite]

@@kylegoodfield9088 who’s gonna check that though really you think a cops gonna check if your brakes cut your throttle

[@rzorNvme]

You need a first aid kit in the shop. That scrape must of hurt after the adrenaline wore off.

[@GoldGuyRides]

Oh yeah it hurt.

[@johnnyversaci7091]

More like a gash lol

[@WarwickBass79]

Or a crank puller

[@dtiydr]

That 20Ah battery is about half the size as my genuine 20Ah battery. Just wanted to mention its at tops 10Ah and the batteries in it is not the best either thus the very low price for it.

[@andrewwright.]

One cable tie is good...two cable ties.... priceless peace of mind.

[@mart43]

Before installing the new inner tube it might be handy to check if there are no sharp things are left in the tire. Otherwise you have to buy a new inner tube. And also when removing cranks just buy the tool its is just 5 bucks and will save you a lot of hassle

[@timothysmith9255]

Five bucks sure, but where for $5?

[@mart43]

@@timothysmith9255 AliExpress!

[@stephenrayguitaristartistr2866]

you've made the best inexpensive e-bike build on KZbin im building one just like yours thanks so much!!!!

[@colinbaird3673]

kzbin.info/www/bejne/eGTCgWdseMSFo5I

[@xx-----------xx873]

Please use a better bike with disc brakes, this bike was not designed for these speeds and will fall apart.

[@codydavidson8315]

I've been studying this e-bike stuff for a couple years and this is the best video I've seen good job

[@GoldGuyRides]

Thanks for watching! Just to clarify, the $350 is the cost of the ebike kit and battery, I assumed that most people already have a bike to use.

[@mas3679]

I cant get the battery link to work to find the battery you used. Can you tell me the brand and specs for the battery? The ebay link didn’t work for me.

[@Mitternacht63729]

That okaman battery looks fake, I like that it cost you little and they promised you high specifications, you should test the real capacity, that is to say of being a scam it doesn't have the 20.000 mah promised but less or half

[@Mitternacht63729]

the rest of what has been the engine controller etc looks quality and economic, my kit of 1500w cost me 300 euros from china to europe spain

[@jamesloll4601]

Better check what kind of bike and the shape it's in. Most new people to the e-bike craze don't realize the kind of torque those motors are putting on the bike frame. If the frame looks weak, it IS. That's why the good conversations are working good with mountain bikes. They are designed to take a better beating as they were designed for off-road and the mounting on the frame for the wheels are already reinforced for those jumps and crazy riding people will do off road. It's a healthy plus BUT still even mountain bikes are not designed for the torque a 1000 wat motor can and will put out once you open the throttle all the way. So even on that note, please buy parts that reinforce the e-motor by locking it in by NOT allowing the torque of the motor to twist itself out of the mount on the frame. Take note, there are FLAT sides to the bolt that barely fits the mount. This is to keep the bolt from rotating as the motor pulls the bike forward. The mounts were never designed to take that sort of toque, especially the front wheels of any bike! Even the rear tire, with the bike chain the wheel is PULLED FORWARDS, NOT the twisting torque a motor will put out! So don't be surprised if you start to see the mount warp and the forks? Groove start to space out. It's a dangerous sign you wheel is about to twist out and literally fall off. Imagine a wheel flying off doing 20 mph. You are gonna get hurt is putting it mildly and a good chance it WILL kill you. So take it with a grain of salt, your doing something new? Learn what can go wrong and try to correct it BEFORE you learn the hard way. Bikes were never designed to go 20 plus all the time, e-bike motors make it easy to hit thirty?!? Hummm. Use some common sense and better yet search on what can go wrong. Least I pointed out the BIG ones. What you don't know here can and will kill yeah.

[@robz8989]

350 for motor kit and battery ? You having a laugh the battery’s cost the same as the wheel most of the time unless you use the fake 18650 battery’s

[@jasongooden917]

I personally would have got rid of the front gears to simplify the bike a bit. It’s got a motor anyway. One thing you could do too is get a rear bike rack and mount the controller and battery to it.

[@armandk8190]

well done! Sorry about your hand. I really want to convert my bike for the first time too. Your video is nice and it very encourage me to start mine...

[@sparrow9990]

I like how the battery is litterly just a large hobby grade rc car battery. Even the connectors are the same

[@bobmoy3406]

The wire from the battery is called a 'Deans' connector you can buy an adapter from convert male Dean to female XT60. I use XT60 connectors to connect power to the motor. Great job. BTW I would have used that unknown bag to store the excessive wire.

[@-lookaround-7081]

Thank you for this

[@sidrojinedar1307]

Hey to anybody that wants to build this, I really don't recommend mounting the ESC to the suspension bracket. Instead, I recommend buying this bag by ROCKBROS and putting the ESC in it. That way all the wires are kept hidden. I also don't recommend putting the battery underneath the toptube. I recommend getting a rack and rack bag and putting the battery there. You can wire along the frame so it does not hang.

[@GoldGuyRides]

My way works fine too but if yours works then good for you, it's all preference.

[@sidrojinedar1307]

@@GoldGuyRides Hey man! No hate! I really enjoyed your video. Liked and Subbed!

[@outofthenorm7292]

The bag could have been used for the wiring, just cut a slit in each end and then once everything was buttoned up put all the wiring inside if it's big enough. Very informative vid I want to do this to my old schwinn with ape hangers.

[@sixpacksandsrts9122]

Thad be pretty sweet build

[@Whitty2304]

Ps a little tip for your gear selector cut down the throttle size then put the selector back on the outside of the grip and looking forward to my own build with the same voila ebike kit plus I want to add a front wheel motor also thn pair them up

[@Ed19601]

I built my e-bike for 360 euro (not including the bike itself), including the battery (30Ah) and display. The best part is that if something goes wrong, i can just easily replace it, not depending on dealers

[@Ed19601]

I picked a mid motor though

[@electricbike2062]

Hi. Do the same as I hid the wires in the electric box waterproof, I have a video on the channel, but I'm from Russia and speak Russian 😊 well, you will understand how to do it, how to hide all the wires from the rain, and also make sure and make an amplifier on the motor wheel🚲

[@Wobbly-World]

Another thought how about using a hub drive motor fixed in the frame driving through the bottom bracket sprocket, with a double chain ring to transfer the drive to the rear wheel with an epicyclic gear hub of course!!’ If you haven’t guessed I don’t like derailleur gears, I do a lot of off road riding and find them a pain in the butt, as they get fouled up and constantly break, not good.!!’

[@vladimirLen]

lmao that Tinder notification at 20:03

[@jamescahill3390]

Well done! I have a 1500 watt voilamart hub motor with a 52 volt triangle battery. I bought a puller to remove the pedals. No washers. Better wrap that battery in some padding and get some proper connectors.

[@SpreadingKnowledgeVlogs]

Also on that bottom bracket nut the big one you banged on with a hammer and flat head on the crank bottom bracket you really want to torque that properly because it's easy to grind out that area (I run mid drive motors instead of hub so for me it's really super important but still even on hub motors it should be properly torqued) just want to try to save you from having to trash the frame or buy new parts to fix anything. Hope your enjoying the bike

[@kingjaysteve3376]

This video is by far the best if you want to build a e bike

[@nobrakes7247]

I can't believe you actually got that crank arm off without poking your eye out. Buy yourself a crank arm removal tool

[@rubenc7858]

Love the blood and sweat you put in the job. 👍

[@simasivanovas8853]

smarter would be just to convert into single gear and remove both shifters for more clean handlebars, you can adjust by screw shifters in to single gear in case of breaking down to come back home.

[@SmallGadgetMan]

Thats the exact mask I used in 2020 lol idk why not many people thought of bandanas they are easy to keep on you. I love the cheap hyper! I actually have a clean one just like that available on marketplace for $35 lol

[@MrBuddha71]

Dude!! WD-40 would help on siezed stuff. I am just saying that because I feel for you and I have drawn blood too many times myself. Thanks for this video. My son will have an e-bike by next week because I just learned how to build one by watching your video. New subscriber here also.

[@kevindtimm]

Since your parts are going to disappear from your suggested links/sites/retailers a description of the parts would be helpful. However, I gotta say this was fun to watch (except the bloodletting, though I know it is a requirement)

[@stefannewels1823]

Bike mechanics nightmare 8) But kudos for not giving up and spread the fun and joy of DIY 👍 Greets from a german Bike Mechanik

[@jacobweacott9483]

You really got us at the end

[@curthott1317]

I’m 67 with 2 DRZ’s and a couple Triumphs. I’m thinking this will be a good way to supercharge my old Bianchi mountain bike so I can use it more. That’s for the inspiration young man!🚴🏼‍♂️

[@monstercolorfunco4391]

I got a German 1000 dollars new alu bike for 140 dollars :) dual suspension, manitou forks, shimano diore, nakamura, all strong quality for those rocky roads, all working fine lol.

[@AlchemiUnlimited]

Bike laws require the speed limiter be connected when in use on public streets. Great video !

[@mikebaird3867]

Everytime you say "special" I just think of the Yamaha 50 SPECIAL clip, you should use that clip everytime you say special

[@mattyakester8963]

Was thinking the same. 😂

[@mikebaird3867]

@Goldguy , can we make this a thing? Please ahahaha, like if you agree

[@mikebaird3867]

Looking forward to the next video . knife forging, ebike stuff, motorcycle stuff idc enjoy all your videos.

[@machfiver753]

If you don't have a pedal puller it's easier to use a splitting maul (the type without a handle) and use that as a wedge between the frame and crank arm and tap at it till the pedal arm falls off. Way less straining and gouging of skin. Just move the maul from one side to the other every now and then so it separates evenly and requires less banging and potential for damage to the frame etc... But it still takes longer than taking the bus down to a bike shop and buying the proper tool for the job. And makes it easier by far. A pedal puller is cheap to buy too and will last for years even a chinesium one will last forever if you engage as many threads before cranking on the inner bolt.

[@tommills177]

Good job. I’m pleasantly surprised.

[@bhaskarparam9711]

Wow wow walmart good prices thanks for teaching how to put the tube wow high quality brake levers wow so many parts $190 only

[@JabarisPics]

You look like mr beast who hasn't ate in 2 months

[@dm_for_feetpics9009]

So a dead mr beast 😅

[@repozal]

Nah it's Chris

[@dronevideofootage3128]

He looks more like, the guy who operates the channel, rconlife

[@sosnowskijordan93]

😂😂

[@officialmysteriousrider6327]

@Bob Loblaw a guy with more money than sence with a porno tash

[@gotchurebeacons-gaming9023]

Thanks for the great video. Please…get a crank puller. One and done and yer set for life…no more scars.

[@lonniestutler313]

You have to inclose that battery. Lithium ion batteries can and will explode. They have more power than TNT. One short and it over

[@emish4282]

I back this!

[@davidvicars6688]

The cable management is real hehehe. Nice work getting that all put together, you made it look somewhat easy

[@swanp1767]

You made that look easy. Thanks. Im not ready yet but this is one step closer!

[@fishycomics]

Thank you for sharing the actual list of parts. If I want to replicate this with my Bianchi Advantage, I have to research more. I also do not need it to be 30MPH, just 20 MPH. I also have a Huffy, and I may just do this for that bike.. My question is the controller box, I wonder if they come alot smaller, like the Swyft. , and yes, living in a big city I see someone stealing it in a heartbeat.

[@mrphildc]

I’m building my own soon. This was helpful!

[@Bandito071]

Another great vid mate, just make sure that the rear shock isnt going to hit the battery when it bottoms out

[@TitoJoebs]

I just love the growl of the Subaru (fan here).

[@deathofthemagi]

That Money sound needs lowered, about threw my headphones

[@69tytyhar]

you need protection for that battery if you fall off the bike fire waiting to happen

[@SpreadingKnowledgeVlogs]

I was going to say get a crank puller and while your at it get a spoke tension gauge but I already see a ton of people commented on the crank puller already but it's worth mentioning they are pretty necessary when pulling cranks, you very rarely find cranks that won't benefit from a good crank puller.

[@MrLandslide84]

Whoooa that bike went under a car. Also, when you build the battery box I'd pad it with something. I found corrugated plastic at work, similar to cardboard. Just to soften sharp blows in case you tumble.

[@rogerwilliams5579]

Great job make me want to my own build.

[@JK-zl7vv]

The bag they gave you is for all of the extra length wire to go into.😂

[@MondoPb3]

Just completed a similar build will definitely be linking your video in my description when I'm done setting up everything and editing it

[@paulshutts6412]

Looking forward to that MondoPb3.

[@Psyrecx]

PAS can go on either side. It's just easier to put it in the non drive side with a square taper. I have mine mounted drive side, but I also have a Hollowtech crankset. Drive side makes it a little more protected, but isn't necessary.

[@RaymoneDavis-yl9wn]

You need to cover it up in a case or like a back cuz if it rains you can ruin your battery that you just built you need to put it in the case washed out by the rain

[@warlockboyburns]

the best way to mount the controller is on the underside of a cheap rear pannier rack. And paint it black. And hide the wires with a Velcro chain guard.

[@thakiusmuckfeather1103]

Amazing how you restored that bicycle. But what are the scratches on your hand? Dang! Looks like you can be glad that you still have it.

[@fixerman6404]

Great job.glad you got some fun on it. The controller is limiting your speed by supplying very little amperage.can be tweaked but easier to upgrade controller.ride on brother.

[@demolitionwilliams7419]

Good job friend. Great video and very helpful

[@okeymccomis119]

I'm sure you've figured it out by now, but the controller fits the bag, it's just tight and there's a slit in the bottom of the bag to feed the wires through.

[@rom5285]

I liked your video. Moved along nicely and was very informative. Thanks.

[@jstagzsr]

the connector on the battery is called a "deans" connector. It's common on low voltage RC carsm like 1s, 2s, even some 3s.. although anything 3s and up i usually use xt90's.. but yeah, thats a deans.. or some places call them a "T" connector.

[@peterobrien7465]

I am about to do this myself too . This video was so helpful. Thank you

[@bradwelds8763]

Also the best place to put your battery is in a rucksack because there’s way way less vibration, it keeps the cells warmer in cold temperatures and if you fall off the bag cushions the fall all prolonging battery life also don’t buy them cheap crap batteries they are then ones you see exploding

[@Adui13]

Nice video. Sadly the prices have gone up on the e-bike kit and battery, but prices are up all over so that's no surprize.

[@siddus74]

Quality video, i've just picked up a great MB for £40 and ordered the same parts .. going to great fun - thanks again.!!! :-)

[@bradleyemmerson3728]

How did the build go?....

[@jimobrien2309]

So cool. You made it look simple.

[@tjadventures]

Nice to see a fellow Subaru brother into bikes too😁

[@dave9456]

Brings me so much happiness and I haven't even ridden it yet I translated that as brings me so much happiness and I haven't even taken my Ritalin yet 🤣🤣 Good job bro you made it look so easy Inspiring stuff 👍👍

[@gyffjogofl7676]

I really like your editing style.

[@GoldGuyRides]

Thanks, I really appreciate that!