Convert YOUR bike into an E-BIKE 2023 **THE COMPLETE GUIDE TO A 2KW HUB DIY MTB CONVERSION KIT**

COMPLETE GUIDE ON HUB CONVERSION. TURN ASNY HARDTAIL INTO A FAST PRACTICAL BEAST!
DUDE STUFF COMPETITIONS
raffall.com/du...
Win a brand new Ebike for just £2!
KIRBEBIKE WEBSITE
kirbebike.com/
Discount code: dudestuff for £40 off!
EBIKES FOR SALE
/ ebikesforsaleuk
DONATE TO SUPPORT THE CHANNEL
paypal.me/dude...
KIRBEBIKE WESBSITE
kirbebike.com/
BUSINESS ENQUIRIES
[e-mail]

[@keyproductions100]

You should NEVER use that plastic spacer with a disk, its only to be used when no disk is installed (rim brakes) it is to prevent damage to the coating on the hub from the bolts, and to stop the bolts from going too deep in to the hub

[@lifebehindtheselens]

This comment needs to be pinned

[@turboleggy]

​@@samuraiscriptsdang bro. I'm 35 and in the same boat. In guessing you don't live in northern california.

[@samuraiscripts]

i dont yeah@@turboleggy

[@saltydog888]

@@samuraiscriptsMate you have the guts and the attitude to do it🤙🏽

[@johnrobertson7583]

That’s just plain dumb. You wouldn’t have rotor screws there if you weren’t using disc brakes...the screws come in the rotor kit.

[@Badboyyardie]

What I love about you and Andy Kirby is he's showing from a professionals point of view and your showing from a diy'ers perspective best combo

[@fencer39]

Hey Steve you are easily the best DIY Bike guy on youtube. Informative with a great sense of humor. Keep up the great work & Thanks !

[@DudeStuff]

Thank you 😊

[@TuffTowling]

I prefer the other guys video of pulling the van the content was better

[@DudeStuff]

@TuffTowling bit random when this is an ebike tutorial and the guy thanked me for diy specific content. Not to mention it was a girl not a guy 😄 not to mention they sell low spec ebikes for 2 grand they don't make high spec ebike conversions. But everyone's taste is different.

[@terrytowling3414]

@DudeStuff whoooo don't be so salty "dude" 🤪 half your content is illegal shit anyway 🤣 thought it was up to us to decide ? you've said enough lol just take it as flattery instead of turning a nice peaceful give away vid into a copycat rant of a lifetime 🙈🙉🙊✌️ p.s love ya 😘

[@reecesnell6408]

What's the other channel called I'm intrigued now be good to see the comparison 🤔

[@jackotaylor1785]

I've got a MuddyFox and a Carrera and I can't decide which one to make into a E-BIKE. 😂

[@phillyd2018]

13:41 great to see an mt60 connector being used for the phase wires. I would for sure advertise that as a feature over the standard connector block used on cheaper direct drive motor kits, which tends to not be great long term. plus you have a quick and easy quick disconnect.

[@phillyd2018]

however a criticism that I would make for Andy is to sell proper torque arms on his website, the ones he sells are not ideal. The company which made them has said so themselves. A v2 style torque arm would be much better.

[@craigelliott4338]

My kit is ready to build, just watching again before I start building. Dreams.

[@AntonKoba]

Thanks for the well-explained step-by-step instruction! Happy and safe riding!

[@ednackerud6032]

Hey Steve I never heard of Kirby build kits so far what I seen are the best conversion kits that I've seen so far I'd sure like to try one out one day you're doing a great job Steve keep it on

[@OXdElivery]

Looking to make my own ebike. This helps a lot. Got a factory ebike at the moment for food deliveries. Thanks for the video mate.

[@robwheeler281]

Can this this kit be used in a commuter bike in all year round ?

[@pavlovauk9162]

Fantastic video, simple explanation. Andys conversion kits are fantastic. I was looking for a kit for my Mate bike, on Aliexpress or Ebay but, Kirby kits are the best with the warranty , great customer service, emails answered straight away by Jason Wang, thanks a lot. Going to buy fat tire 20 inch kit next month pay day. Can't wait. All the best to all of you.

[@ianmangham4570]

Nice to see someone fitting the torque washers correctly on the inside, just file a little off the front side of the dropout then it'll fit in without a hammer 🔨 😉 ,it needs to come out easily at the side of the road incase you get a puncture .

[@DudeStuff]

Not sure what mean are you suggesting filling the dropout? I'd rather have it tighter and tap in with a plastic mallet. The tighter the fit the better. The mallet isn't needed for the dropout tightness anyway it's more likely the dropout width and spacers being tight filling wouldn't do anything to help that just loosen the axle fitment which isn't good! It's a gentle tap that doesnt damage anything to ensure its fully down as far as it can go. Steve

[@ianmangham4570]

​@@DudeStuff Yes you file the front end of the drop out where the most metal is 17:03 where your left index finger is,,only a few points of a millimetre /0.2mm ,so it glides in smoothly.I been fitting these kits since 2013 and if used daily they pick up punctures because of the weight even with kevlar guard tyres. 🙏 so much easier to fix a puncture at the roadside with the wheel out, Ian 🤠🤟🇬🇧

[@Smeaded]

0:38 is that devils lettuce hanging from under the umbrella? 🤔

[@MGWAIKIDOJITSU]

Haaaaaaaaaaa😂😂😂😂😂😂

[@dinislam1886]

What display is that? The one that comes with the current kit is not just a color LCD and not a full-color TFT like the one you have there. BTW thanks for the discount code 🙂

[@Nunya269]

45:39 the smile on em made me crack up 🤣 cheeky bugger, deadly skid unit

[@pieceworkstudios]

Great info. I did a DIY conversation to an old junk bike and love it. I'm with you on the PAS and at first I disconnected it but later I wired a couple of micro switches so I can switch on the speed limiter and turn on the PAS and it's just right when I want to get more exercise and pedal at a comfortable speed of about 12mph, or I can turn off the limiter and the PAS for just tooling around town on it doing errands. Mine is a front wheel hub so a little nose heavy 🙄. Next time I'll use a back wheel hub with a cassette like you do 👍. 10ah batt gets me about 16-20 miles if I'm conservative so I have a 20ah coming in the mail to be the main battery, and an A/B switch so I can throw this current one on the back rack and have it as a secondary to run longer trips. Thanks for all your tips though man 😎👍

[@EFTA-gg5oz]

is this right now the best choise to buy?i found it on their homepage the kit for my 29 costs 992 euro. I have zero knowledge are there other better alternatives?Money is not an issue but maybe getting a new e-bike from a known brand would be better?your idea thanks

[@Gwatts78]

Thank you for your videos brother. Very helpful. from across the pond.

[@JSStuart100]

Thanks man pretty cool of you to put that together. Good video. Thanks from Destin Florida.

[@hugoalbrecht10]

thank you for educating me. I'm good in general with DIY and you have a great skill in explaining the situations in every video so far that I have watched. made its easy for me to gather info to do ebike project with a single speed racer i have. thank you very much

[@markbennett6658]

A generally good guide. I did a Yose Power 350w conversion on a Scott Sportster hybrid bike. That has an integrated controller in the battery mount which looks a lot cleaner. I’m guessing it’s not possible to do that with higher wattage conversions because the controller needs to be bigger to cope with the extra load? I did fit the triangular bag anyway. Excellent for a puncture repair kit, a few tools and a mini air compressor for roadside puncture fixes. I personally fitted the cadence sensor to get some exercise and extend the range. Probably less likely to attract attention from the plod if you’re pedalling a bit. I didn’t do the brake cut outs though for similar reasons and because my gear shift and brake levers are integrated. Thumb throttle is useful for getting away if you stop in too high a gear and ….15mph looks like warp speed😂

[@DudeStuff]

Yeah that's right you generally have smaller less powerful controllers built in to battery bases. Grinn make a reasonable one but they can be a bit off with tech support and warranty on my experience. Plus you can only use their over priced displays with it, their ugly as hell and too over spec'd I don't need to programme throttle curve on my handle bars for 300 quid

[@mikecullen6557]

Thanks for this vid, very detailed, gonna give it ago💪

[@suntzuwarsword1964]

Thank you for the clear run down how to its really awesome. And ive subscribed..from queensland Australia many thanks💯🎯

[@losbastardosmtb]

Anybody that buys this Kirby kit won’t Be disapointed it’s perfect .. and if your having problem finding the keys for the battery they are taped to theinside packaging/bubble wrap will Ben ordeing aNother for my norco bike next 🤣

[@igortodorovic6463]

Dude this video is awesome !!! Thank you I needed this exactly ! Wish I won the bike as well haha. Cheers

[@blackline-qf6fl]

Thanks for sharing.. here in New Zealand we have no speed limit but we are limited to a 300w motor but it's not being policed & popo wouldn't know the difference if we were to stick a 300w sticker on a bigger motor..

[@timhigton7503]

What a perfectionist, I would love to have a bike like this it's so nice... what a cool guy as well.

[@DudeStuff]

Thank you 😊

[@vincentchapman2968]

Steve that was a great introduction on how to do rear wheel hub. I build my first bike by watching you. But I'm going to try to do the rear wheel hub. Great information on how to build it. Keep this great work up. You are the Haynes manual on electric bikes 👍

[@DudeStuff]

Appreciate it thank you 😊

[@tatianatodorova5199]

@@DudeStuffwill this kit work on a trek marlin 6 3x8 drivetrain 19.5 inch frame 29inch wheels and 29x2.20inch tires

[@DudeStuff]

@@tatianatodorova5199 yes it will

[@marcellocapone4925]

Are regular (separate) controllers better than those controllers that come integrated into the battery mount? Which is more reliable and future proof? Thanks.

[@DudeStuff]

Generally, separate ones are slightly higher amp output if we're talking average prices kits. Grinn do a higher power integrated controller but the plug connectors are huge and ugly and you get no display or the option of only using their own ugly overpriced display nothing basic and cheap. Possibly better cooling on extremal controller depending how you mount it.

[@marcellocapone4925]

@@DudeStuff Thank you!

[@tamaramcd5240]

How much is a kit in Canadian dollars ​@@DudeStuff

[@Gregissigma]

I have a trek marlin 5 gen 3 29in and my frame does not have that’s big place to put the wheel it’s just a circle can anyone help? Would it still work?

[@paulfreefall]

Love the new smaller controller!! Is it possible to fit the new sine wave controller to the old kit? I see it has different connectors.

[@jonvickerson7694]

Can you put the controller and the cables in a bag or box with ventilation….?

[@rochekml]

No lights connector on this controller ? 😕

[@BrikMT]

Nice video Dude, although I will say why not leave the nut on the axle for protection against the mallet / floor, if the threads do become damaged you just unscrew the nut and it reforms the thread. I've been watching your uploads for over a year now after I was forcibly reintroduced to cycling after a break of over 27 years, I've converted an old Giant hybrid bike with a Bafang mid mount kit which I now use to commute 4 miles each way, covered about 2,500 miles in a little over 12 months. Thanks for the regular, varied and humorous content. Oh and more of the dog please, she's a beaut.

[@yusifr1]

Just did my first 1000w 48v kit on an old pinnacle i had.. thanks mate helped me alot earned a sub from me!!! Love the content

[@keith-gl1kc]

Great build helpfull hints and yes 15mph looked fast nudge nudge 😉 😉 lol

[@danenright]

This little detail cracked me up and made me love this channel 😂

[@so.calmotoadventurerides3135]

15mph is weak

[@SanchoRAMZAM]

The torque washers that came with bike can’t be used again any ideas what else I can use or a torque kit should work?

[@sirowlux]

Great video, very informative

[@slyrz6699]

Silly question will a trek dual sport 3 2022 be able to fit this kit?

[@philfarrell7400]

Hi, brilliant and very informative, the only thing that I would say from experience is that the bottle holder isn’t designed for taking the wait of a 3 or more kg battery. I personally think it’s better to drill thru the frame and bolt it. This is from experience of my first build, I’m on my third now and u have given me alot of tips, so thanks, so I hope maybe I’ve given you one too?. Those bottle holders just strip their own threads

[@Gt78-e8g]

In this video you show how to fit everything but on the website there isn’t back wheel conversion it’s only front wheel any help?

[@goliathus4254]

will they ever make a one for thru axle wheels.

[@cameronmacdonald6525]

Probably worth chucking a big piece of heat shrink on all the wire connections. Super easy and will water proof those connections

[@jonvickerson7694]

Hey Steve…great video again..what amp is the controller in the kit…?

[@SPEXWISE]

ECMF = Easy Cable Management Fadangleriser.

[@DudeStuff]

😂😂😂

[@s__ne8]

What size are your washers, and where do you find your anti-rotation washer? Thanks

[@jimsworthow531]

Best rear hub install system and video i have seen yet; awesome; thanks. i want to install it on a mountain schwinn 29", will it work? I need a 29" rear wheel correct? I looked at the website; i missed it; what is the difference between freewheel thread and cassette? i can use my old rear cassette like you did; thanks

[@hullskint]

well that answers my question about the rim decals 🙂 bonus! cant wait!

[@mickyb.8014]

Shame they can't spell "Manual" properly on their website, joking aside these are a good kit, bit pricey though, I managed the exact same set-up for no more than £670. All quality parts, and no it ain't a cheap battery that I bought, the battery cost the most (52v 20Ah - kit was a Voilamart, all stuff bought from e-bay). One point I think should be said, it makes sense to fit torque arms on both sides. That's what I've done anyway. Nice video, you do a good job of explaining the fitting process, for anybody doing this patience is a virtue as it's best to really take your time and do it right.

[@markneedham2745]

Just wondering if you can install a light set on this controller. Cheers.

[@user-uc2dk1vp6e]

My kits from kirby didnt come with the metal around the motor cable to protect the wires, So the wire got cut when a screw come loose, I had to get it fixed hall sensor! What can i use to protect this steve ?

[@thisnthat6972]

What is the best controller for a 72v 30ah

[@scottharvey9764]

Does the P.A.S settings 1-5 limit the speed on throttle or does the throttle over ride the numbered P.A.S setting.

[@JudeTheYoutubePoopersubscribe]

Default settings are that the throttle gives 100% power and ignores the pas setting.

[@Wh05cali-ix8kv]

My question is (having had the kit on for a couple months) when adding the spacers onto the wheel and stretching the frame out to fit it in, is that not pulling the Caliper mount away from the hub by 10mm or so. Do you not need to space to disk further out due to this, haven’t been able to get a brake running without rubbing or schreaching due to not being aligned correctly.

[@mikel4159]

Looks fun as! I reckon a brake upgrade is certainly in order with something like that, at least put much bigger discs on it, like 203mm, more power and better heat dissipation.

[@leow7865]

What's the maximum voltage the new controller can take?

[@tomdeighton-zk9eo]

My kit did not come with those washers and spacers, where can I get them from?

[@ib4737]

With the lock in washer wouldn't it be better to put it on the outside rather than the inside

[@solomon7827]

Can I fit this battery on a Carrara vengeance M frame it looks to small

[@J.butler-e1o]

ordered a kit, the kit came after a 300€ custom charge. how long after will the battery arrive ?

[@DarkTriad6]

Been watching you for a while now mate and you've unlocked my inner childhood I want to start riding again and do a build to sneak around town 😂 do you think you could do a single speed dirt jumper bike build a little 2000w 48v 🎉🎉🎉

[@DudeStuff]

Just look out for enough space on frame triangle for battery and controller huge probably won't fit

[@DarkTriad6]

@@DudeStuff thanks for your reply mate, been watching your uploads for a while you keep me entertained and when you say have a break make a cuppa tea or grab a beer, I make myself a tea 😂 yes I was thinking this because the frames are smaller and there's no water bottle screws on them style bikes so may have to do hardtail because they have the screw fixing, also would I be able to take the single cog off and put it on the electric hub, that's if I find a way of getting a battery to fit if I did a dirt jumper,,, sorry to bombard you I know you must be busy and doing what you do takes up a lot of your time so cant always reply, and I'd like to say big thumbs up on the old mafiabikes blacked out build, that was tidy 👌🏽

[@DudeStuff]

@@DarkTriad6 you can get a single speed conversion from amazon

[@DarkTriad6]

@@DudeStuff sorry it's late mate been on the phone sipping ☕ looking at kits all day/night 😂 I haven't come across any single speeds on Amazon or eBay 🤷🏽‍♂️ if so what have you spotted and whats the specs 🙏🏽❤️🇯🇲🤜🏽

[@DarkTriad6]

Hello mate @DudeStuff getting back to what we was talking about the other day, I've brought a 26" rear 1500w kit and looking to put it on a 27.5" hardtail, what I'm calling a Hard-E-Mullet 😂🤣 do you think this can work, it says 1500w should be at 48v 20ah but could I get more OOMPH with a 52v 24ah I have a 32v controller 🤷🏽‍♂️

[@englishtothebone]

Another top episode well translated for me nice one❤

[@ighu68]

can someone help me i just assembled everything and whent to accelerate and the axles spins with the motor causing the wheel to lock up

[@nockzGT]

When I put mine together it squeaks from sprocket only when on the bike and when peddling what have I done wrong

[@andrewwinter3722]

hi my only concern is my discs are a central locking ring , have you done a video of you changing one over to a new electric back wheel ? great video otherwise andy

[@stevegreen3442]

Love your videos, such a great learning resource and got me now into doing this, awesome my friend, keep these up please 🙂

[@tonyross7376]

Great information Steve. Getting one of these kits soon for a project 🤜👍

[@ProfYC]

Hey Buddy, Im new to your channel, and I have to say that you're doing a great job in explaining things. Just a few questions to ask. 1. I can't see the £40 discount code nore the link? 2. There are several restrictive laws on ebike speed limits but surely a 2000W 20ah ebike kit can do a tone more than 15mph? 3. If I want to apply a front motor wheel hub and a rear motor wheel hub. Can I do that to a single battery and a single controller unit? 4. How much would that cost roughly because from memory, I recall you done that to one of mountain 29" black bike with a combined power of 5000w? I hope you can help me out with my questions and give me a little guidance. Thanks, buddy.

[@magnum44pi11]

after riding it for 3500 kms the cycle chain seems to break and pads of disc brakes wear and fade, its best to mod to fit a motorbike sprocket and chain and full hydraulic motorbike brakes

[@David33333able]

Im still learning.I like your videos ,they are very informative and funny to....Thanks for teaching me,, D.S David Shoemake

[@jadesandland5540]

Hey thanks a lot for video man I had similar bike set but I had the mtx 39 it was to wide for tires I'm taking this is a small width mtx rim

[@xdeepseadiver]

Great video. You're very thurough in your directions. Have you done a mid crank bike conversion?

[@JensEskildsen]

Cant believe theres still a marked forth non integrated controllers. The integrated onces offer a much cleaner appearance

[@w7floki464]

Just brought a 29 inch ammco bike i want to turn in to a e bike but have no clue just want it to do 30 40

[@DeclanOsullivan-ck2im]

Thinking of getting the kit because it looks to be one of the best looking wise one but is it generally too speed of 15 mph or is that for video purposes only👀

[@stuie2112]

Just ordered this kit so it's great to see a build with it. Thanks a lot for this and the dudestuff £40 discount. Wiring looks much tidier than the previous kit and the controller and battery are clear upgrades. Went with the Vitus Nucleus 27 VR you did a previous build with and it's going for a steal at £325 on Black Friday deal. Can't wait for it all to arrive and have fun building and riding my first Ebike conversion thanks to the inspiriation from watching your channel. Cheers! Well worth a sub👌

[@DudeStuff]

Appreciate it Thanks and vitus vr rides lovely I've done a few of them good bikes.

[@josephrcollins]

325, how much was the total kit used including battery? i just spent 850

[@SprayLifee]

Amazing work mate I’ve tried clicking the kirbebike link in your description but it don’t open for some reason Is anyone else having this problem.?

[@DudeStuff]

Thanks! Link works for me try another browser or device

[@shaq5186]

is the 1300Wh 48V 27A battery a good pair with Bafang 48V 1000W??? idk anything abt ebikes

[@Fuzzywuzzywasawoman]

Was there holes for the battery holder on the frame??

[@Frankreef2CookAndRide]

wait would the battery fit on a trek marlin 7 medium size? help from anyone thx

[@juliahillman4121]

Can you put a 11 speed cassette in the hub ???

[@robertbishop5564]

Great video as always mate. Quick question - I have a Carrera ( one of the Halfords bikes ) so only about £400 worth of bike. Is it worth putting this kit on it ( I see it's pretty much double the price of the bike I have) or is the bike not good enough quality and I need a better bike to make it worthwhile?

[@AntonKoba]

I think it depends on what you want to get. I'm going to play with a $100 ful sus 'department-store' bike conversion/restoration project. Maybe it won't be super safe for the road, so maybe I'd upgrade it later. For $1000+ I think I could find some used factory-made ebikes (mid-drive and battery hidden in the tube).

[@maxflight777]

44:26 😂👍

[@Ethaniel_UK]

Are you telling me that all I need to to is buy a kit from kirbe and it will fit my mountain bike frame I already have for like £400 just for the kit?

[@Charlie666-]

Built my own bike a few weeks back all of watching your videos. Best thing I've ever done cut my commute loads.

[@MaNNeRz91]

15 miles in about 16-17 minutes across country. Imagine that pedalling 😵😵 would take me about an hour unless I've had my weetabix 😆

[@BrikMT]

A mile a minute, 60 mile an hour?@@MaNNeRz91

[@romeodonnn]

Hi DudeStuff, Hope You’re Doing Well, I Have A Boardman 8.8 MHT With 12 Gears. I’m Looking to Get An eBike Conversion Kit From KirbeBike The Thing Is, Don’t Know Which Wheel To Order 29” (7 Speed Freewheel Thread) Or 29” Cassette (8s, 9s Or 10s) I’m A Bit Confused As I Am New To This Sort I Was Thinking Neither Will Fit Any Help Will Be Appreciated And Thanks For Your Effort On Making This Very Helpful Video 😊

[@DudeStuff]

Order cassette you can fit sometimes 10 maybe 11 speed max, get bike shop to block off 1 or 2 gears on derailleur

[@romeodonnn]

@@DudeStuff thank you bro

[@DSm-q5q]

Hi Steve new sub here I love the content can I ask were I can pick up one of these controllers thanks 😊

[@mcwindouglas6697]

ECMF? ... It's something like Electric Cable Management Fastener

[@JeffDavies-xz8gx]

Hi Steve, seeking advice....i have a Carrera Hustle with 27.5 wheels, 21 speed, do you think this could be a good candidate for the Kirby 2000w conversion? I was thinking buy a 29er with maybe 10 gears but don't want unnecessary expense, and then again i don't want to waste time converting an unsuitable bike. What do you reckon? Cheers

[@Realg401]

So i got a weird question so i got a 29inch mountain bike with the 3x8 shifters and my derailers are trashed if i was to have this kit installed would i still need to have the derailers fixed or is there no way around that?

[@DudeStuff]

Well it's not going to fix your derailleur lol.. but if you use throttle only and it stays in 1 gear ok you probably don't need the gears much at all

[@twistedtuner3467]

In regards to the locking washer with notch. I measured my frame at 135mm however AFTER I received the kit I read elsewhere that the 2000W kit is 137mm. So I purchased based on 135mm confirmed. ( seen this 4 different places as well as the instructions). Tried 3 different bike frames and it is NEVER going in with these spacers inside the dropouts. (haven't even mounted a cassette yet) Can I use these locking spacers on the outside of the dropouts then tighten nut on them?

[@DudeStuff]

They will fit pretty much every hardtail and brand I've ever tried it's just a tighter fit than a normal wheel. What hardtail did you try?

[@twistedtuner3467]

@DudeStuff I have a Jamis Durango hardtail 8spd and a Jamis Dakar full suspension 10spd converted to 8spd. As well as the Giant Rainer hardtail 9spd. I have it in the Giant with the notched spacers on the outside. The disk is very close to the frame but it is in. I would need to fine tune the caliper mounting . But the Jamis full suspension is the one is was destined for. There is lots of room in the rear triangle (actually fit a 203mm disk in there with room to spare) but still tight in the drop outs. I think all the frames are aluminum so prying to much is asking for future stress cracks on our crappy roads/trials. Basically the notched washer is installed on the outside of the drop out and the notch will still engage the dropout, so as long as everything else will fit/line up it should be equal results in the end? No? The wheel is actually centered in the frame almost perfect but I think getting the derailleur and cogs setup will be the next fun time. Trying to locate my spare 8spd cassette and not having much luck. I am actually messing with this right now so thanks for the fast reply. @@DudeStuff

[@natetv1494]

24:22 why do you call it the jubilee clip??

[@DudeStuff]

That's what they call a hose clamp in England.. no idea why 😂

[@thisnthat6972]

Can I upgrade brake discs to 208mm

[@ahsaniftikhar142]

Hi mate How fast would a 52v 34ah 2000w go

[@bawtreerd]

This is very informative for someone just starting out Thanks

[@DudeStuff]

You're welcome 😊

[@manoz6194]

What are the dimensions of the controller? cheers

[@03133786]

Another great video Steve 👍

[@beeng8502]

can someone help me to find a good and cheaper choise for ebike wheel and motor i need something powerful good for roads with mtb (mtb with 700c like hybrid)

[@Daz.Boak79]

Great work Steve excellent video 👍

[@yuddman1085]

does anyone know what tool i uise to take of brake discs of my old bike

[@remskicodhead1]

love the drying canopy m8