part 1 of the build. for more products and services visit the website worksaws.com/p...
Пікірлер: 38
@hillbilly4christ6385 ай бұрын
Love your channel Joe. You don’t stand there with the camera trained on yourself like most of these narcissists do. You are a straight up guy that sticks to the subject and doesn’t spend a lot of time like some do having diarrhea of the mouth. It really is hard to find good informative videos anymore. Most of these guys are worried about their advertising money and such to the point where they spend ten minutes with 30 seconds of content.
@dynojoemods27645 ай бұрын
Thank you, I try and keep them as short as possible
@Witschor5 ай бұрын
Great Job Boedy !!! Fun to watch! 👍 for Heidi
@lifebehindtheaxe38355 ай бұрын
I can't believe how good the header sounded on this saw
@tatepazaski54885 ай бұрын
Great video! Can't wait to see what your results were!
@ronkolb13355 ай бұрын
Dyno-Joe, I'm so happy that you will be doing the performance work on my Echo 7310 next month. You are a problem solver.
@JoshNoss5 ай бұрын
Hey I'm very happy with the work he did on my 592xp 572xp and 550mk2 so I think you made a great choice
@ragercrepair93015 ай бұрын
Damn impressive for a 55. Good work Joe!
@michaelRockwell-bc9cm5 ай бұрын
Wanous must be a mechanical engineer, Joe did my new Husqvarna and it is so awesome after the modifications, worth every penny. I dropped my saw off at his shop in person and talked to him for a while he's a great guy and I don't believe for a minute that he would fudge any of his dyno numbers! I picked my saw up when it was finished and toured his shop he is truly a professional and his shop reflects that. I highly recommend his work!!!
@Houseworksaws5 ай бұрын
No way Joe is 100% solid and real. He’s not fudging anything. This is a purpose built saw. People watch vids and don’t realize the amount of time it takes to actually build something like this. These numbers are very very real.
@dgoodman14845 ай бұрын
Good luck! If a guy can top that saw, he’s definitely earned it! 👍🏼
@brandonsmith34475 ай бұрын
She’s an angry little kitty! 😽 Great video and wonderful explanation of all you’re working to accomplish with your HH saw. 💪🏼
@roylerudjordet79745 ай бұрын
Hallo from Norway. Great videos.
@BM-wi9kt5 ай бұрын
Keen to see some more on the 366 builds
@jonathanhensley86855 ай бұрын
Nice work Joe!
@1212zorz5 ай бұрын
Wow, that thing snaps!
@coreycorp70485 ай бұрын
Thats some crafty work, great results to.
@jimholz11025 ай бұрын
Good choice with the forgiving big can.
@Eganperformancesaws5 ай бұрын
Thanks for the mention! Glad u put the pipe to good use
@justinweaver81075 ай бұрын
Very nice work good luck sir❤
@user-dj9us8ic7m5 ай бұрын
Just WOW!
@Houseworksaws5 ай бұрын
I did lots of timed cuts with mine during the build and noticed by the 3rd cut it would slowed down quite a bit
@dynojoemods27645 ай бұрын
Heat soak is a real thing. At stock/worksaw levels the cooling area can keep it under control. On highly built engines the extra power out paces the cooling area and starts dropping power. If mine makes the trip back I'll finish it off with some cuts to show how bad the heat slows a "race" type build.
@Houseworksaws5 ай бұрын
@@dynojoemods2764 I modified the plastic intake partition wall thing to still bolt in hopes it would keep cooler but idk if it really made a difference.
@tedneitzel5 ай бұрын
Sweet!
@johnclarke81805 ай бұрын
I would like to see the wash pattern on that piston, I think it would be quite interesting.
@johnclarke81805 ай бұрын
That's just crazy Joe, please put an expansion chamber on it.
@Banjoandguns5 ай бұрын
Tack weld the ring groove
@ClintsHobbiesDIY5 ай бұрын
She was screaming Joe. I have a 55 on the shelf that I need to get into and make it better.
@iraagans31445 ай бұрын
I'm thinking I should send you my 55!😅
@michellatour1505 ай бұрын
Never noticed it in your other tests/videos but there a lot of fuel mixture reversion back out the carb seen during those two dyno runs.
@dynojoemods27645 ай бұрын
A lot of that is from the leak in the bottom ring of the piston being in the intake. But also so to the large intake area on this
@BillsGarageWorks5 ай бұрын
5.6 ponies 😮
@jonathanhensley86855 ай бұрын
I’m curious what paint do you use on your muffler’s
@julianlaustsen19915 ай бұрын
when it's spitting that much back doesn't that mean the intake port is way to huge?
@dynojoemods27645 ай бұрын
Intake is definitely on the large side. A lot of that was caused by the leak in the bottom ring groove. At the upper rpm not enough time to spit back. But at the lower rpm, it has time to spray out
@Wanous-hv7zo5 ай бұрын
All your HP ratings are inflated. You posrt them out and gain 3 to 4 HP not possible
@dynojoemods27645 ай бұрын
Baseline run was around 3.5 that is around a 2hp gain so far, these are very detuned engines and I am doing some very extensive work. Most work builds gain 1 hp or so. Not sure where the 3-4hp claim was made?