Рет қаралды 32,810
With basic welding and cutting skills anyone should be able to build a diy cockpit - rig setup like in this video.
This is how I built a sim racing cockpit - rig in just a few days! I wanted a simple design that would look clean and professional.
These were the final dimensions of the rig (exculding the extra 50+mm in height caused by the caster wheels):
Height to the steering wheel mounting plate = 650mm
Height to the seat mount = 200mm
Height to the pedal box mounting plate = 100mm
Total lenght of rig = 1220mm
Total width of rig = 590mm
Pipe thickness = 45mm
The pipe that the steering mount plate is connected to is 340mm in from the front of the rig
The seat centre is approx 300mm from the rear of the rig
The pedal box to seat is approx 750mm (centre to centre)
The steering mount plate to seat mount plate is approx 400mm