Building a TUB DECK from the Ground Up!

[@nrehberg]

“Classic Paul” aka quality craftsmanship. Nice job.

[@kerryhawkins4255]

Really liked the substantial support for the tub deck. Real craftsmanship. Keep up the good work

[@El_Jefe_Zamora]

Your attention to detail and how the little things the average homeowner wouldn't notice, you still would rather take it apart and redo it speaks VOLUMES about the pride you take in your work. I applaud you for being a man of integrity. These are the things your son will remember as well

[@Dave_Simmons]

I couldn't tell from the thumbnail. So I was happy to see you use treated lumber on the bottom of the tub frame. I have seen too many jobs where treated lumber wasn't used.

[@kirkstaggs9773]

Treated lumber is not great, it shrinks and warps unless you treat it yourself or buy the better quality stuff. But if you expect water, water proof it and protect it.

[@workmanshipbygrace8173]

Can't wait to see the finish product! 👍👍💯

[@john.french]

Awesome quality work. "Classic Paul"!! Project is coming out really nice. I bet the homeowners are very impressed and happy with your attention to details

[@markbourbeau4019]

I'm only a few episodes in and am not sure of your background, but I don't think there is anything you can't figure out and do! I wish I could work with you on my home. Calm, precise and methodical about your content make following along and learning from you a joy to watch. Great channel sir!

[@JesusLopez-di1so]

Right on right on keep up the great work guys

[@bubba007sss]

Even though I do, and have done this kind of work I still like watching others do the work. I like it that you obtain a pleasant atmosphere.

[@MediumRareSteve]

I appreciate good, clean, honest work like this.

[@the_mixdown]

Just going back to check out this job. So normally no seal /edge between the drywall and the concrete floor under the tub? Awesome to check out these old jobs! 💪

[@phillipmonroy]

Great job you guys! Good to see you double checking and correcting any problems you may encounter.

[@jasonburrell3508]

Y'all make it look easy. Great job!

[@htownblue11]

Classic Paul! Hahahaha. Love how you saw your own mis-step and took measures to correct. There’s a lesson in there some need to learn.....COOL trick with the spade but stepped up to trim that area. Your clients are blessed to have you doing the job and likely don’t have a clue how blessed they are in truth.

[@StudPack]

Thx TJ!! My clients are awesome 👍

[@LTJ55]

I have two questions first is what size nails do you use when framing your tub and etc. next question what’s the type of nail you use when securing wood to concrete?

[@369dusty]

I'm definitely hooked ! I watch every day to see if there is a new video to see. Great job guys ! Please tell your whole family to have Merry Christmas !!

[@JoeDAngelo4u]

The tub support framing base board should be treated lumber when in contacts with concrete. And maybe any dry wall in my bath room remodel I use green board with sealer it’s just me.I learned from my dad he was a developer and landlord of many apartments and homes great work I enjoy your videos 😊

[@neiltropolis]

Crafty as hell ! Thanks you both.

[@mickylevy1780]

Great work as always pity the videos are not longer i do enjoy watching you guys at work

[@devKazuto]

Part numbers on projects would really be beneficial for everyone. It sucks having to look which video comes next by date.

[@TheMuscelBoy]

Man the experience this guy has is amazing !

[@marvelletyson6581]

RESPECT!!!! I love the excellence!!!

[@jessicahites871]

Fantastic work!!

[@pkbrowerstudiosllc5434]

10:25 CANNONBALL !!!!!! Great video!

[@jameshouser7663]

I would hire this guy I don't care how much he charged just because I'd know it would be done right.

[@jamessurname2285]

Wondering why Jacuzzi recommends tile under the tub lip?

[@rugguy9838]

Love the spade bit tip 👍🏻

[@Re5ist_ance]

Looking good 👍

[@BecsFunny]

I have to raise my jacuzzi bathtub up about 12” for the plumbing. How do I support directly under it?

[@jeromegarcia5396]

I would kilz oil based everything in a water area because mold grows on porous surfaces, if everything wood and drywall is sealed mold and mildew has very hard time existing... Not required, but under the principles of doing something like building a shower area, one will want to not do it multiple times because failure... Mostly do it yourself home owners will appreciate the extra step to prevention along with craftsmanship puts another star in quality...

[@NathanBiden]

great work guys. Very solid compared to the builders that built the one in my home.

[@cdurkinz]

At 0:30 I wonder if you could have used the beveled edge of drywall there to step down to the backer board or not. Not sure how much that gives ya. Just curious I don't know if it would have worked.

[@bfrbradleyfamilyracing7139]

I have a similar tub going in our new home, tile was laid before tub was installed, and now I'm trying to anchor the tube so it will not move. What have you done for this?

[@hughchui5337]

good job , keep going keep watching.

[@tagndash01]

Looks great! Some people say run tile to the tub, others say run tile under the tub! Classic internet. Anyone have thoughts on that? Thanks!

[@angelicab121]

Can I use 1/2 or 3/4 treated plywood instead of boards so i can tile around a roman tub? I made a deck with treated wood. But I don’t know if I can tile over it. I live in puerto rico and many type of boards arent readily available since we dont have winter like in the states but what options do i have to cover the deck for tiling? I would greatly appreciate advice.✨

[@jimmski9908]

Looks good but why set the tub on the diagonal, instead of parallel to the wall? Seems to use a bunch of extra floor space.

[@StudPack]

We have the client the option of moving it but they wanted it like it was originally

[@abdal-haqq1688]

Nicely done. Is there any particular reason you didn't use a ramset to secure your bottom plates of the tub frame to the concrete?

[@StudPack]

I don't own one. It's a very job specific tool that I would use once or twice a year maybe so I just use my roto hammer and anchors.👍👍

[@galensmith3948]

Did you put backer board around the drop in tub and if you do do you just use thin set?

[@MrDfeliciano]

It would be nice if you put a link in description to next video. It would help navigate your videos. Thanks!

[@rodneyrichardson-daniels3010]

Love the work

[@freddie966woo]

After u dropped the tub in, what do u use to watersealed the 4 side of the edges before installing cement board and tiles?

[@terryburgess6637]

Spade bit genius!

[@israelavitia8011]

You guys do such good quality work! Its obvious the amount of care and detail you guys put in! Keep up the awesome job! Love your vids!!

[@StudPack]

Thx Israel!!

[@JamesSmith-co1kt]

Wouldn't red guard or similar product be a better choice for the lower portion of the drywall before framing the deck?

[@StudPack]

You could but that area should never see water with Kerdi on top of the deck... if I understand your question

[@derrylpriester1008]

@@StudPack ..

[@TheRaker1000]

I can't imagine having you take out the tub deck, seeing all the new space in that bathroom, then telling you to build it back the same.

[@return2basics242]

Yeah, seriously!! Now is the perfect time to try something new!! Must be an older couple who has decided that they like what they're used to. As I get older, I've noticed I've started doing the same thing. I've tried something different, didn't like it as much sometimes, ....just give me back what worked best for my preferences, please.

[@annekis2735]

@@return2basics242 I am an oldy and I would never have put that ugly bath back.

[@return2basics242]

@@annekis2735 🤣🤣🤣 Note taken.

[@Wanker59]

Agree. This rubbish is so 1980,s. I’ve built 100,s of bathrooms over the last 10 years and not ONE was on a deck… looks crap actually

[@austin3626]

That’s gonna be a slick looking bathroom

[@fishingwithwinter1219]

Imma subscribe because of that drywall mistake and that tub deck Awesome from Texas

[@dfresh4130]

Just an amateur DIYer myself, but curious if it would've made things easier for you to make the floor level using leveling compound? Any reasons why that wouldn't have been a good idea to start with before your other work?

[@StudPack]

Yes that would have worked well. I guess I'm trying to minimize the amount of material I have to buy but weighing that against extra time spent framing on out of level floor... probably a wash? Not sure.

[@TheRaker1000]

I'm just a DIYer, too, but I would think there are a few considerations for that: How long would it take for the leveling compound to cure so you could build on it? It might be faster to just make the cut adjustments like he did than to wait for the compound to dry, which wouldn't matter to a home owner, but he's a hired guy who wants the job done so he can go home. Would a thin layer of level compound support all that tub weight as effectively as the thick slab that's already cured for years? It's not like leveling under tile, where the floor spreads evenly over the whole surface; you've got all the weight concentrated on the floorplates, so it might crumble under there.

[@jimreitenbach6023]

Nice blend job

[@borys444]

Ur son is the ultimate yes man. I can almost predict every time what will come out of his mouth by now. I suppose as his knowledge for the trade grows we will c him come into his own but until then it’s yes, cool, looks good, perfect, etc..

[@stich1960]

Are you disparaging a young guy who is interested in the trades and a go getter? Because I see where your coming from but kid is a pretty solid helper from what I have seen I wish I had someone like that on my jobsite we all start somewhere

[@borys444]

@@stich1960 I wrote this comment when I first started watching stud pack videos. I made the mistake of putting him at the same level as his father which led to me to say what I said above. The more I watch there video series the more I realize construction just ain’t his bag, he seems to b more into the video editing and finds his joy there as opposed to bettering his craftsmanship. That’s fine and I respect that which led me to lay off of the stern constructive criticism to begin with.

[@TheRaker1000]

This is not network "reality TV " where they have to write script full of extra drama where people fight over trivialities constantly. They are a youtube channel team and this is their style. Good craftsmanship and great info, and if the son pipes up with "nice job" and "looks perfect", he's just adding his positivity to the mood of the channel.

[@victor-manuel-pr]

wow awesome job

[@video422]

Nice job like always

[@jjcs1381]

This guy is good!!!

[@garyedwards5934]

Questioning how you arrived at deck height? After tile tub will be 1 to 1 1/2 8nches higher. What will you do to support the bottom of tub? The tub I am working with says not to install without bottom support, not to let tub hang. Just curious for the project I am planning

[@StudPack]

We made it the same height as it was originally. We'll support it with some type of bedding compound for sure... mortar, foam, thinset, not sure yet

[@johnjones4825]

@@StudPack We support the tub in South Africa on a bed of builders sand, rammed in as the wall is built, different to you guys in that we build almost exclusively with brick and mortar. I still can't get my head around wooden construction, I see too many examples on KZbin of mould and rot...

[@cyclopsvision6370]

@@johnjones4825 mold and rot is not a problem for wood, unless it gets wet, that's why you need to do proper waterproofing to make sure the water will never get in contact with the wood

[@DLRPyro1]

What are the metal fasteners you hammer into the concrete to anchor the plate to the floor?

[@kurtfattig9370]

Hey Paul- I just found your channel. I am loving your videos! You are great at explaining what goes wrong, and why, and how to do things to try to prevent it from happening in the first place. Great job. Keep making videos and I'll keep watching!

[@StudPack]

Thx Kurt 👍👍

[@justatitle]

Do you tile before you install the tub? Also, can you tile directly to the wood with grout or tile glue? Thank you.

[@StudPack]

Yes tile before tub. We treated this like a tile floor. I won’t put tile on plywood. It’s not recommended. Check out our video on it 👍

[@kingbee4474]

How do you replace faucet when everything is tiled when needed?

[@shaun8544]

that's solid!

[@gpintoon]

Great Video. Not hate'n...just remind everyone to ensure proper fire blocking before closing in.

[@StudPack]

Great reminder Gerald.. I spoke about fire blocking in this bathroom remodel video series - "We had to drywall around 8 pipes".

[@FLYAGI]

Still waiting on someone picking you up for tv series. Would you do it? As always...great video!

[@StudPack]

🤔👍

[@Ironman3521]

Freakin awesome work

[@mackmccune2862]

At 3:30 did you use regular paint primer or something else ?

[@LS-sv7bo]

Merry Christmas

[@johnokane5526]

Brilliant work from you and your son really enjoying watching and the jokes you have and nice father son bond 😂😊 I am disappointed that the bath was put back in the framing like before just so much space wasted there but that's the customers choice not yours but everything has been built too last for a long time keep up the good work and videos

[@stich1960]

But if your going for quality how did you let you ledger go on the outside of the drywall?

[@StudPack]

I was fine with it in this application (tub deck) plus it resulted in a better wall assembly IMO. I did put some structural screws through it as well.

[@enolastenson9792]

Thank you for the imput

[@Jim_Wilks]

What are the make/models of the 2 lasers you used here?

[@julio3421]

Makes me want to build my own bathroom

[@sgcarpenters1299]

Let’s see the water proofing process

[@Noez90]

1k views in 9hrs... you guys are getting there.

[@miguelacevedo6788]

I like your work lots of information great, but I like to see your son get his hands dirty too...

[@fitter70]

I have a contractor who is using 4 pieces of scrap flooring for a drop in tub.

[@cookysteam2118]

Why didnt you put your shop vac on the end of the saw to catch the saw dust?

[@StudPack]

It was at another project, I'll have it there tomorrow.

[@jeromegarcia5396]

Could you have poured self leveling on the entire floor?

[@jasonbooth1696]

Next time mention the pitfalls. How thick the plywood has to be, what the considerations are for building the height of the deck vs. the depth of the tub, tolerances to allow. There is almost nothing that was of any use for someone trying to do this for the first time.

[@michelleroop9991]

👍👍

[@steelontarget]

What size is that tub?

[@obviouscaptain2931]

Anybody know a good bathroom crew in central N.C.?

[@Barbedwiredgifts]

👍✌️

[@fishingwithwinter1219]

I will say Use tapcons instead of anchors or dead bolts Easier to use and easier to remove if’s mistake is made

[@oldschool1993]

Why aren't you using green board around that tub?

[@StudPack]

I seal all my drywall with primer regardless. If it gets wet the water will run off so no mold. Always thought green, purple etc was marketing hype but who knows??

[@oldschool1993]

​@@StudPack It's been a long time since I was active in the trade. Back then in my area you would get a red flag if you didn't use green board in bathrooms- It is not a marketing hype, it does have a moisture resistant composition with a wax coating, but regular drywall properly sealed will work as well.

[@StudPack]

Cool 👍. Good to know I appreciate that

[@MikeYeah]

As absolutely always, great job. Confirm with me, is Jordan your son? Great video!!!!! Really cool laser tools as well. My handyman business is named "Pack o' Jacks", funny. I never knew that dot level existed, amazing for lining up that drain.

[@StudPack]

Thx Mike! Yes Jordan is the oldest of our 4 children 👍

[@JulianPicht]

Why don't you use a ramset gun?

[@StudPack]

We do this so rarely I can’t justify buying one. Lots of other tools I need first 👍

[@casualstyle79netherlands55]

meeeen i wish i was a millionaire so i could buy several houses and let Stud pack remodel them and me watching them live all day longgggggggggggggggggggggggg ( and pay them good offcourse )

[@jr60288]

I came to find out how to secure the actual tub to the platform

[@StudPack]

It just sits there. Silicone around the edges and it’s not going anywhere. The bottom of the tub must be supported also 👊👍

[@hmtrimworks7148]

Do you guys did a great job, but I don’t like nothing about it… They should’ve got a corner whirlpool or put that one against the side wall like a regular tub… There’s a lotta wasted space there and personally I don’t like the shape of the deck… But it’s whatever the homeowner wants I guess

[@raymaiorana9514]

Why not put a free standing tub instead of a drop in? Save all the work of building a tub deck.

[@StudPack]

We looked at it Ray but the owners decided to keep the drop in tub.

[@raymaiorana9514]

@@StudPack It looks great anyway. Just a thought. You guys do great work especially as a father and son team

[@remushaynes2693]

greetings mr. paul; i am just curious as to your location.......................g

[@StudPack]

Baton Rouge

[@hilariobaeza3259]

Man you guys are awesome . Love to watch you work . I am a retired carpenter concrete finisher . I'm disabled due to so many years of laying Concrete . I am learning so much by watching your videos . You guys are truly pros . Thank you An God Bless

[@johnbultemq8026]

Tub should be installed with shims to account for backer board and tile and 1/16 caulk. Do not install tub on plywood like this man

[@raulgil7389]

Too much work for such a small tub. Double it -🛁 🛀

[@info5583]

You guys are amazing! Killer work as ALWAYS. Jordan hit me on IG @sohodh