BUILDING A TURBO SYSTEM FOR MY JEEP

[@timryan8174]

Bentley is a master craftsman and true artist! And a stand up human being!

[@Nick.Barnes]

Dude it looks SO good! You need to cut a big Peck bros ‘P’ plate and bolt/weld it to the engine cover

[@PeckBrothers]

DUDE. I’ve got to now. That would be so. Freaking. Sick. 🔥🔥🔥

[@MGPeterson16]

Yes, I’m gonna second this. That manifold cover needs some Peck Bros branding.

[@MGPeterson16]

Looks so flippin good though!

[@JeepLifeChris]

Bolted with risers in black would be killer 😎

[@JeepLifeChris]

New video was worth the wait. This twin turbo setup is so sick. The fab and tigging is amazing work. Brady’s reaction at the end 😎.

[@PeckBrothers]

Thank you man 😁😁 I hope it was worth the wait, I haven’t worked that hard for that long consecutively on my jeep in a long time 😂😂 so stoked you liked it 🔥

[@jeffcutrer]

Any time you can get Bentley in your videos you take it! That man is a true artist and has helped me a few times! Easy on the hair jokes though 😂

[@PeckBrothers]

He is a freaking genius, he has actually known us since we were little kids and all 3 of us have looked up to him all growing up 🔥🔥

[@jeffcutrer]

@@PeckBrothers incredible welder, but an even better person!

[@AmmoDawgOffRoad]

You guys rock!🤘 Great video and the Jeep is looking awesome. Man, I truly enjoy watching you guys and the brotherly love and shenanigans. You pops has to be one proud dude🤘 Keep it up

[@jimhoran5445]

Bentley got some mad skills! 🇺🇸🇺🇸🇺🇸🇺🇸

[@BentleyGarner]

You guys are the best. Awesome episode boys.

[@PeckBrothers]

Stoked you liked it my friend 🔥🔥 Thank you so much for everything man 🙏🏼🙏🏼

[@jeffcutrer]

I was cracking up when when Cayleb kept saying “get the jeep out of his hair”. Man, not one, but two bald jokes in there!

[@JeepLifeChris]

The Wizard has spoken. Amazing work @BentleyGarner!

[@briskettaco]

Your buddy is hilarious. 😂 Entertaining as always guys!

[@PaulKaiser42]

Jeep looks awesome!!! Can’t wait to see how she does on the trail 👊🏻👊🏻

[@rocklanderoffroad]

That is some sick fab work! We need Dads reaction!

[@user-GETTINGITDONE]

I love how caleb took 3 minutes to install and explain how EZ and quick V-bands are !!!! "UnscriptedTvRules"!!!!

[@Peter3e2m1]

Can’t wait to see them turbos in action!

[@nickperez3228]

Still don’t get how they only have 13.5 subs. Wtf get these boys out there

[@beaumont9072]

America 🇺🇸 💪🏼🤙🏼

[@MIOffroadCustoms]

V-Band them thangs, they don’t leak! I’ve never done it off a header, just saying might be worthy of a try? 🤷‍♂️

[@Tanner731]

make copper gaskets for the exhaust, seals so good

[@jeremywolfe5483]

Cayleb, that intercooler and intake setup is so sick. Could you add some protection over the hood for it? You know there’s going to be a point where you’re on a hard trail and gonna send it 😂

[@oldkingcole4300]

Gaaahh dang, Caleb’s jeep is turning out so sick 🔥

[@dommagana4537]

I’m always looking forward to your guys videos! Builds are looking so dang sweet! Best of luck!

[@adventuresbyknight9348]

That Inner Cooler looks awesome

[@Hardlines_FullsendRc]

Definitely the coolest frigging intercooler I've ever seen. That dude is a magician 🎩 frigging sick!🔥🔥🔥🔥

[@rickyn1858]

awesome work!!!! Really loved this video and that look at the end was priceless!!!

[@PeckBrothers]

Haha thank you so much 😁😁😁 so stoked you loved it!! 🔥🔥

[@StormbornJKU]

You guys got some killer work done. Things are looking good!!!

[@PeckBrothers]

Thank you 🔥🔥 so pumped you like the way it’s turning out 😁😁

[@Blackandblueoffroad]

Worth the wait that looks sick can’t wait to see it on the trails

[@redbeardoutdoors4914]

Awesome content as always brother!! Keep up the awesome jeep content that we all know and love. 🎉 I'm building a 02 tj and just bought a 632 c.i crate engine that I'm gonna put a single 88 turbo on it.

[@dieseldirtdude]

killer effort, jeep is unbelievable

[@PeckBrothers]

Thank you so much!! There was no lack of love and care on this part of the build 😂😂😂

[@mikecrystalrobert7898]

Should be one hell of a machine when it’s done👌

[@kaaawaz]

She's beautiful!! 😮

[@PeckBrothers]

She is a labor of love that’s for sure 😁😁 I’m absolutely stoked about it 🔥🔥

[@kaaawaz]

@@PeckBrothers I would be to. You all should be very proud of everything you've done.

[@Yuccabillybrad]

Coming along guys.

[@kyletice811]

Copper rtv or just some copper sheet would work to make a gasket for the collector. Or cut the 3 bolt off and put on a vband.

[@daven.rogers]

Holy crap guys! Looks so good.

[@raymondburke7230]

Awesome video

[@PeckBrothers]

Thank you so much for watching 😁😁

[@carsonbrackin7761]

I seen the Jeep sitting on the trailer at your house and knew something was going down😂😂

[@jasonturck7121]

That is beautiful great job

[@Farang_Lifestyles]

the face on Brady at the end.... "you didn't build that" lol

[@billjcanada]

That's some mighty fine fabrication work. Its going to be interesting to see how it works on the trail. I suspect that you will break axles and drive shafts if your right foot gets too heavy

[@PhatboyHD88]

Such a awesome job editing these videos ..man they are funny ,, keep me laughing 😂😂

[@derekm6884]

You boys are starting to look a little bit exhausted. Understandable

[@MrTyler1798]

Remflex gaskets are the best

[@rigosend86]

I think the word he was searching for was “flow”. Lol

[@prestontoosle]

gettin wild!

[@Turboexplorer]

Was that Bently Gardner in Bluffdale UT?

[@dannyharp6922]

Where have you guys gone, haven't seen you in over a month?

[@AlxJrz401]

SICK!!!

[@charlesq6148]

Trans killer, axel breaker, hub destroyer... but I like it..

[@MGPeterson16]

Looks like an old school Dodge Challenger!

[@MGPeterson16]

Hahahaha wow I was way off.

[@jacksonhutton6895]

Cut the 3 bolt flange off and use a vband bro.

[@AirboatX]

So what’s it look like with the hood down?

[@rocknsnowryan9400]

Progress!

[@ronniebrown7208]

Nice

[@MarkWYO]

Caleb should've flown to Salt Lake in his buddies plane again...

[@kennethhughes1600]

What part Idaho u at

[@andrewt30]

Great video! But how’s Callie doing?🤷🏼‍♂️

[@NinjAsylum]

You know I've been around cars way too long when I could instantly tell a Ferrari just from the shape of the front clip...

[@ADHD_Moose]

The video is currently at 2:09 and my guess for the mystery car is a Ferrari F430

[@CrawlinTJ50]

🤘🤘🤘 awesome!

[@thedirtaddiction]

i feel like guys who tig weld really well, are super wise. is that why they call tig welders wizards? 🤔

[@robertshipway190]

Dudes!!!!! Where is the new content. Please ! More. Ya'll are so damn funny.

[@qxr20]

i have one of these :)

[@charleskuykendall9625]

It’s a YJ

[@mattbaird5467]

97 Camaro

[@thomasleonard9685]

Bentley has some skills. What does he do for a living? There’s shops like kindigit that would pay for those skills. You owe him Special favors just on the intercooler. #kneepads

[@JamesHamilton-y3l]

Put bands on it

[@JamesHamilton-y3l]

V bands

[@mikelee8851]

It’s a sports car lol I’m right 😂

[@kensworld1979]

Slingshot S

[@MrSelmo85]

A scud is not the top dog Ferrari... it's maybe the "top dog" of the 430's..

[@Higanti]

I think there is a hoaxer messing around cuz I know I watched this video and it showing I haven’t…

[@jeffersonphilipm]

V-band 🙌 over three bolt flanges 🤮

[@rockdblock1034]

300 - 500k 😂 for a Ferrari 430? Hahahaha

[@tommynance2261]

I didn’t read the comments it look like a Camaro

[@emungai]

The lesson is if you want $500k toys, learn to weld.

[@bella_cocoa]

First

[@charleswilliams8197]

You guys are really halareuss really y'all is brother at first when I started watching your videos I really didn't care for them but now my day does not go well if I don't get to see a new video from y'all idiot's hey kalopeb I really don't even myself want to try to spell your name but when you weld aluminum it's really needs to be cleaned before you even start I'm 55years old and unfortunately I'm in a wheelchair but before I had received the curse of having to depend on a wheelchair I was a welder All of my life and when I first started welding aluminum I was told by the man who taught me that is the most important thing for your weld to be d😅js to make sure that it is clean okay and another thing is once you get to running your weld you have to move fast if you don't you seem to know what happened if you didn't move fast okay one more thing if you know someone who knows how to weld aluminum you should get your self a welding hood and put it on and watch them run Some welds or beeds okay if you know how to weld on regular steel you should be able to weld on aluminum brother okay don't give up because it kicks your aress okay keep trying evenchalie you will get it okay thanks Charles Williams y'all number one fan okay you're young enjoy being young before you know it you will be Old and It really does suck getting older in life when you are in a wheelchair okay later on jelly beans lololol okay thanks Charles

[@lesheath6216]

Just ditch those stupid turbos and go with a Magnusen supercharger, problem solved

[@PeckBrothers]

Geez tell us how you really feel, maybe I’ll take out a 3rd mortgage on the house I rent lol much rather spend 1/32 of the money and have the whistle of a turbo! Thanks for watching

[@lesheath6216]

@@PeckBrothers two turbos = twice as much work and twice as many problems. Take it from someone who's been there. And I won't even get started on the reliability issues.

[@Damage_inc_offroad]

@PeckBrothersOffRoad When might we see a new vid? Been a month and having some withdraws. Digging all the builds!