Building a Wrought Iron (steel) Gate

[@83metalcraftllc52]

Great looking gate. You made it look pretty easy. Definitely speeds up the process when you have spacers to keep everything nice and even across. I employ the same method with my rail and gate builds as well!

[@AModernMaker]

Thanks! Yes, speeds it up quite a bit

[@Eastbaypisces]

@@AModernMaker how long did it take to build, this gate is sick af, do u do these with the flat top tho?

[@YuraKvadrat132]

Gorgeous gate turned out. Skillful fingers.

[@AModernMaker]

+Юра Thank you!

[@ΚΑΤΕΡΙΝΑΠΙΤΣΙΟΥ]

Worth waiting for your next project !!!!!!! I admire each and every one that makes wonderfull projects out of wood and i have to admit i m a little jealous for those who know to make such amazing things with iron ! Congratulations very nice piece !!!!!!!!!!!!!!!!!!!!!!!!

[@AModernMaker]

Thank you +ΚΑΤΕΡΙΝΑ ΠΙΤΣΙΟΥ Very kind!

[@2010denney]

Awesome work! Keep uploading!

[@AModernMaker]

+Josh Denney Thank you!

[@MOUNTAINEAGLES]

you do good work in this video thanks for share.

[@AModernMaker]

Thank you MOUNTAIN EAGLE, much appreciated

[@stevenmchenry9276]

Dude that's freaking nice

[@AModernMaker]

Thanks!

[@mico26az]

Nice gate what was the cost of material thanks

[@alphasigmasezon8597]

Excelente serviço.

[@AModernMaker]

Thank you!

[@bill-chichi9701]

Nice gate. Gotta love a plasma cutter......

[@AModernMaker]

+Bill D Thank you. Oh heck yeah I do!

[@johnwayne2103]

Nice work! I could use one of those for my driveway but i want spikes to roll out for the undesirables.

[@AModernMaker]

Haha. Great idea!

[@ChrisPadillaAZ]

What about spring loaded 4 ft blades????

[@weldingjunkie]

Came out good. They make privacy metal mesh that is light weight and you can see out but no one can see in. It’ll take some weigh off

[@AModernMaker]

I suggested that but customer wanted solid steel.

[@AModernMaker]

Thank you btw.

[@Fairfaxcontractor]

Nice work!

[@AModernMaker]

Thanks!

[@trulyaktive4796]

Dope Gate ! What gauge did you use for the 4x4 post I’m making a similar one and need to know what gauge will be good

[@AModernMaker]

I believe it was 1/4” wall thickness. Good luck!

[@DerekConwayTX]

Really good stuff!!

[@AModernMaker]

Thank you +Derek Conway !

[@bogey_master]

Nice work. I know the video is old, but do you remember how many inches that arch was? Im building a 15' wide by 6'6'' gate & I don't know how much arch to put in it.

[@AModernMaker]

I have no idea. I had the client go with me to the metal supplier and decide which arch he liked best.

[@balabay77]

Nicely done gates, they look awesome. By chance do you know the wall thickness of the main square tubing posts? Thanks for posting this video, very informative.

[@EamonWalshDIY]

Nice gate! well made.. keep the videos coming.

[@AModernMaker]

+Eamon Walsh Thanks!

[@TroyeStonich]

I agree, this is top notch. Details on how you made the arches?

[@AModernMaker]

+Troye Stonich I thought about building a tubing roller but found a metal supplier who will roll it for free. So I went that route haha. I may still build a tubing roller anyway for future projects. Thanks for watching!

[@infoinfo3594]

@@AModernMaker where should i get the materials cheap? live in northern CALIFORNIA

[@northwestgaming4049]

@@infoinfo3594 how far north

[@JustinCrediblename]

Jeez! looks nice. good job. no way I'm gonna take a project like that on. Man-hours?

[@AModernMaker]

Thank you! I’d guess around 30-40 hours. First build though and my shop isn’t set up to build gates efficiently. Haha.

[@lapislazuli455]

Impressive work! What was the weight of this beautiful, sturdy looking gate? What is the name of the tool you used to cut the metal plate @3:06?

[@AModernMaker]

Thank you! The long end probably weighed a couple hundred pounds.

[@AModernMaker]

That’s a plasma cutter at 3:06

[@amelichkina76]

I love you project. can you help me were can i buy those sheet metal?

[@frankrodriguez7468]

Great job.... Does any one know the job cost of labor rate and time frame for a job like that? Parts, labor and supplies needed for an average price range? Thanks and love the nice work.

[@AModernMaker]

Supplies were around $600, labor cost depends on location, timeframe is around 24-100 man hours depending on how efficient your setup is. He was quoted $3-4,000 for that same gate by local gate builders.

[@frankrodriguez7468]

Thanks a bunch for the info....very helpful.

[@JUNIOR-mi2ei]

Excellent work buddy I hope one day I can do that

[@AModernMaker]

I hope so too 👍

[@rais4266]

How did you do the curve on the top of the gate?

[@AModernMaker]

I bought it with the curve. The alternative is using a tubing roller which I didn’t have at the time.

[@desertrider325]

Nice. Why do you put weights in it?

[@AModernMaker]

It’s been a while so I can’t remember exactly. Probably to keep it square or in position.

[@firestone677]

always good to learn a good tips. thank you

[@AModernMaker]

Thanks for watching and commenting.

[@zahidch3463]

i love this work

[@AModernMaker]

Thank you!

[@user-metalisme]

Nice work. Like

[@AModernMaker]

Thank you!

[@JWB671]

You should look into using rotabroaches or even holcutters from Blair equipment for hand drilling into tube steel. Way better and faster than bits or hole saws.

[@AModernMaker]

+JWB671 Thanks I'll check them out

[@AModernMaker]

I ended up buying a set of rotabroaches from Blair. So much better! Thanks for the recommendation!

[@JWB671]

A Modern Maker... Ha... I commented on your current video about them without realizing I was the one who told you to use them!

[@AModernMaker]

Haha. Thanks again!

[@wopper103]

What gauge is the metal sheet

[@PattersonRoofingROC]

Can you put a list of the tools and materials if you can and how much everything is please

[@AModernMaker]

Tools are shown in the video and materials will vary depending on the gate design. Cost for this gate was around $600 in materials.

[@ibysplumbingvideos9684]

That is some quality work mate looking really nice. What kind of paint would you use. On my gate I used red oxide with a brush and hammerite metal paint with brush and was still getting abit of rust. Can you help me solve this problem. Thanks.

[@AModernMaker]

The home owner I built the gate for ended up painting it. The rust could be coming from not fully welded sections of the gate. Maybe adding some sealant so water can't get where there's no paint?

[@jcerna7226]

Nice work man! Can you give me a rough idea of how much a 10ft gate this style go for with installation included?

[@AModernMaker]

Thanks! I have no idea. I don’t build them for a living and never looked into having one built.

[@mico26az]

What was the cost on material thanks?

[@northwestgaming4049]

Hey if you look up the Rogue Fencer I can help you a little bit on figuring prices. Entryways are more preferred job. Prices will vary due to your area my area but can give you an idea of what to expect.

[@605MuffDaddy]

Where did you get the scroll inserts?

[@AModernMaker]

I bought them at the local steel yard where the metal was purchased.

[@METALMUNCHERS77]

Looks good but why not use a barrel binge with a grease zerk

[@AModernMaker]

+BIG HUNk Thanks. We wanted the adjustability of the J style hinge.

[@METALMUNCHERS77]

A Modern Maker that's bad ass either way bro props

[@AModernMaker]

Thanks BIG HUNk, I appreciate it.

[@agrippa7712]

I wondered if it sagged if any? That’s bad ass.

[@nfranco987]

nice work! what thicknes is the plate are you using?

[@AModernMaker]

+N Franco Thank you! Which plate are you talking about?

[@nfranco987]

the back plate of the gate

[@AModernMaker]

+N Franco I think it was 18 or 20 gauge

[@steightofthehart7899]

sheet steel has a thickness up to 0.25 inches (3 mm) above this it becomes plate

[@MotherAmerica-ci1uu]

Nice

[@AModernMaker]

Thanks!

[@josephgonzales3573]

Are tacks sufficient?

[@AModernMaker]

Enough of them are depending on where they are.

[@romannerush1830]

Super!!!👍👍👍

[@AModernMaker]

Thank you Roman!

[@zonalenhart6954]

Awesome 👏🏼

[@AModernMaker]

Thanks! 👍

[@tmmyjay]

What gauge metal for the frame?

[@AModernMaker]

11 gauge

[@tmmyjay]

@@AModernMaker Shoot, I just ordered 14 gauge...

[@110welding]

good job....

[@AModernMaker]

Thank you Henry Sanchez

[@xhuntallday8891]

Was the a 35 dg cut?

[@AModernMaker]

No idea.

[@danielmaia428]

Saiu melhor do que encomenda!!!

[@AModernMaker]

Thanks!

[@johnstiller2852]

What size of square tube is frame and to center square bar what size thickness of wood u using and where do u get curved square tube

[@AModernMaker]

1.5” and 1/2”. What wood? Most metal supply locations have a tubing roller to curve it for you.

[@pablofernandez3700]

excelente!! saludos !!

[@AModernMaker]

+Pablo Fernandez Thank you!

[@realf1rme]

gr8 stuff unlike the shit i got installed ...

[@AModernMaker]

+realf1rme Ah the sucks

[@julianlopez6201]

What type of cutting torch is that?

[@AModernMaker]

A plasma cutter. Hypertherm Powermax 45

[@DF5152]

What size posts did you use?

[@AModernMaker]

+DF5152 4x4 or 5x5. Can't remember.

[@denispommainville3144]

Great work! What size of tube did you use? 2×2×1/8?

[@AModernMaker]

Thank you! I believe it was 1.5” .120 walled square tube. Recommended by the steel yard specializing in gates.

[@Edmund_Squid]

Can I come work for you? Ive got about 15 years of experience as a welder/fabricator. But I never get to weld fun stuff like this. Your video makes me want to start my own fab shop just so I can build cool stuff like you did with that gate.

[@AModernMaker]

+Edmund Squid Haha thank you! You definitely should!

[@tomallen100]

Then you should. Lol. Lot of inexpensive welders out there now to get you going. It is addictive. Lol.

[@northwestgaming4049]

@@tomallen100 best thing I ever did.

[@greenleafkratom]

awesome work! what would your price be on a gate like that?

[@AModernMaker]

Thank you! Probably $4k or so. It’s not something I do often though. The guy I built it for was quoted $4-6k.

[@Eastbaypisces]

@@AModernMaker damn just for the gate? or the door too??

[@rmartuszewski]

What welder was used? I can see it is a L.E., but a 200 amp? 180?

[@AModernMaker]

+rmartuszewski It's the MP 210.

[@infoinfo3594]

where should i get the materials cheap? live in northern CALIFORNIA

[@AModernMaker]

Any location that sells bulk metal materials

[@cautious9139]

very nice just look for different hintches so it wound have those holes not good.

[@Muomua]

can you make me a gate like that?how much would it cost?16 ' long by 6' high.

[@AModernMaker]

No, I’m sorry. I’m not a gate builder.

[@cuevas0420]

You should have drilled hole in the sheet metal behind where the square tubes are so u could hind the welds.

[@AModernMaker]

+StellaPiggie YT The issue with that is eventual rust forming at every single hole. Then water dripping down the inside of the tube.

[@jerryhuff86]

Cool😂

[@rigorodriguez2257]

Good good work: lucks easy is not thanks for share ;

[@AModernMaker]

Thanks!

[@geodezix]

the metal sheet seems to defeat the purpose of a gate. However, you did a good job on this.

[@AModernMaker]

Thank you geo dezix. The sheet metal is for privacy.

[@geodezix]

it's kinda like wearing a tuxedo and then putting on an overcoat.....

[@AModernMaker]

+geo dezix In a sense, yes.

[@ChrisPadillaAZ]

I love it!! The sheet metal is awesome...

[@smalls5607]

Can u make a video explaining?Nice work tho

[@AModernMaker]

It’s in the works, it’ll probably be a separate channel though.

[@ChrisPadillaAZ]

Did you create a new channel???

[@mugahi00]

never seen wrought iron made into square tube before

[@northwestgaming4049]

I just did a modern privacy with 1.5 square tubing.

[@awesomegamer31]

I hate to be "that guy" but what is wrought iron?

[@AModernMaker]

+1500lego It's a special type of iron commonly used to make decorative gates and fences, etc. Its much more expensive than the mild steel I used.

[@tomallen100]

Been in the gate business for decades, wrought iron is rarely used anymore, people associate scroll work and intricate metal patterns with wrought iron so they generalize everything into it being iron and it is not. Sadly even some of those making these items don't even know the difference and their clients either. Most gates and railings being made nowdays are from steel or aluminum. They can closely resemble wrought iron but definitely are not.

[@AModernMaker]

Thanks Tom Allen. That’s how I️ understood it as well.

[@user-ISPTECH]

hi can i work with you i also do this work

[@ashleysimmons4586]

Ok, but why would you attach the solid plate, before painting the back of the pickets and gate. It works better to paint or powder coat gate itself and then screw the Sheetmetal to the back after you coat it separate.

[@antonelladivannidibiaggio7684]

HERMOSO TE HA QUEDADO ESE PORTÓN METALICO. UNO ASÍ COMO ESE QUIERO YO PARA MI COCHERA( GARAGE). DESDE CHILE....BIANCA ANTONELLA DI VANNI DI BIAGGIO.

[@eduardocruz4881]

Noooooo all that good work for jbolt hinges? Come on.!

[@agrippa7712]

Eduardo Cruz right and for a heavy door, come on.!

[@elmeromero2500]

Eduardo Cruz A couple of flaws, but using jbolt hinges is the first thing one notices, also it looks like the gate needed to be a few inches wider, big gap between the posts and the gates, but to money on labor looks good.

[@rynstvy]

What’s a good hinge for that kind of application?

[@CR-tm5ug]

Do you want a helper

[@user-uo8qy8be2p]

I like silent videos

[@makem.c.p.eplays-robloxnmi3242]

Good im gonna make it soon to make people subscribing me dont go to my house

[@onestinkinggenius]

How did you bend the square channel at the top? Did you use a bender? Did you do it yourself? I thought it was almost impossible to bend square metal tubing without the sides bucking out.

[@AModernMaker]

The company I bought it from bent it. They used a tubing roller. I plan on making a build video of one soon.

[@AModernMaker]

I ended up making a tubing roller as promised. Here’s the link: kzbin.info/www/bejne/anjKdaKQmNJgpaM

[@stevenmchenry9276]

Nice