Building an Extension for a House

[@blakewilkin552]

Hey Dave, you should look into the air valve on your aeg framer as they need to be topped up with an air compressor occasionally. It is mentioned in the manual along with how to find the air valve. Usually when it starts to lose some power, it just means it needs a top up. Love the videos keep it up mate! Chasing my apprenticeship in WA and inspired by your vids.

[@DaveDoesCarpentry]

I reckon that’s exactly what it is. Thanks mate! I’ll see how it goes

[@lachlangutter624]

Hey mate, I take my hat off to you. I’m a chippy and I know it wouldn’t be easy moving the camera around all the time, not wanting it to be a nuisance for the other tradies, then editing all the footage after a hard days work. I really enjoyed the video and look forward to the next one. Keep it up.

[@DaveDoesCarpentry]

@@lachlangutter624 cheers mate! Glad you enjoyed the video!

[@Canipeks]

There's a thing called multi verse, you can record from different angles, 👌

[@ultimateadventuresblog6564]

great vid.. I am a chippy travelling australia and working as we go (building). You just got a new subscriber. 🤘👍

[@the_rocksf1148]

Bought a Milwaukee framer/brad combo a few months ago and can’t fault it. Awesome power and quick. I like this video, you guys are efficient and fast which is rare in tradies these days. All the best fella

[@dombarton2483]

Great upload, nice to see these types of videos. More plz

[@vbroder15]

Thanks mate for your video, we wait for your next video.

[@jimpikoulis6726]

The owner is a good sport that gives a slab a night to the building boys 👦

[@wesallen5903]

Hopefully you post this whole project including tieing into the existing house, good work

[@SteveSnowGO]

Wish I knew how to do all this .. looks like fun 👍👍👍

[@sigmundsound]

I need to mention the cement sheet for others watching. (Many reno in Australia without knowing the dangers and then freak out) House looks at an age where it probably didn't have asbestos, but you treat it the same because silicosis is no better. Great video- More interesting than some new builds. 😊

[@wsullivan]

Mate, first time watching your content on the tube, great stuff, love the style, love the content, keep it up!

[@Knackers_Oreilly]

Enjoying your vids😊

[@DaveDoesCarpentry]

I’m stoked that you are! Thanks

[@JacobSilva-g6t]

Keep with a good job

[@paulserpa1975]

Awesome video

[@MrKrimstah]

Awesome video considering doing this myself

[@Longtimerolling]

Thanks, good stuff.

[@Carpenterscott1]

At milwaukees pipeline this year, they are realeasing 2 new saws. Heaps slimmer design.

[@mattyk82]

You get a like from a lockup chippy for buzzing the beams down before shooting 100 nails into them. If it could be a love it would be.

[@alessiomarin1218]

5:43 lowkey excellent coordination :)

[@Lemandeperth]

The aeg framer has a recall on a the refill valve. I got mine replaced with the new valve (new gun with new valve) and haven't had any problem since.

[@ronmexico7727]

Nice video

[@kobewallis4397]

The aeg makes a battery compressor. You have to refill the canister in the aeg gun

[@philwort1873]

The hikoki is easy to fix the magazine slide. Just need some cleaning spray and silicone spray. The non branded nails seem to clog it faster. Also you can play around with the spring tension on the hikoki. Seems that Milwaukee have been looking at what everyone else is doing and there new 165mm looks like a good copy of the another brands long time saw and there new 174mm which is about to be released in USA looks an absolute weapon with a forge battery, also less weight and bulk I believe.

[@locominyana8916]

Those hikoki framers suck. They're too bulky, & they don't skewer because the firing pins are too small hence they don't recoil. Well, not in my experience with them anyway.

[@philwort1873]

Ok. Was only talking about the sticking magazine slide.

[@locominyana8916]

@@philwort1873 Was just putting it out there. If you were offended, my bad.

[@gregthomson3074]

Nice work mate. Surely that existing slab won't have a membrane under it to stop rising damp. How are you getting sround that?

[@nathan_evan6897]

You should post more brother love the videos!

[@aerotuc]

What are you a new woke sissy Aussie giy

[@TheRealAbuFatima]

Subscribed!

[@Warren.hill.]

I've been having trouble with my Hikoki framer trying to fire 2 nails at once when nailing old hard wood studs, time to get it serviced I think.

[@LONGSHANKSZ23]

yea Dave we defs need a tool review would help im apprentice and have to purchase soon would appreciate it.

[@mixedmartialmayhem7703]

Next time your Aeg leaves the nails proud in the LVL try changing to a fresh different battery and remove the nails from slide and put them back in to make sure they are aligned correctly and tight. Curious if this would make a difference.

[@nandoo89]

Hey Dave, Great vid as always. Was wondering if you could do a video on how you fit your suspenders. I recently picked up some badgers suspenders and I was never a suspender guy so im struggling a bit to find a good fit. Cheers mate

[@TimothyOwen]

Interested to see how the Makita framer goes

[@inphin8]

Seems like you need to fill your pressure tank on the AEG framer. It needs topping up every 30k nails or so.

[@mtrim550]

Hey mate, love the content. Keep it up champ. Dumb question from a sparky.. if you’re to do that slab from scratch, would you form out the shower or would it not be worth the effort?

[@skmitty]

what type of job would i look for to do stuff like this? just finished my cabinetmaking trade and have started to see an intrest in carpentry...

[@simondelaney2958]

Yeah that’s it, by the time you put the gyprock on due to that 1-2mm gap from the grprock glue you wouldn’t need to rebate out for the strapping

[@rayjones2577]

You didn’t use any damp coarse under the timber?

[@JammyJay86]

Why do they look along the wall studs before putting them down and laying out the wall on the ground? are they checking if they are straight? and do you throw them out if they are not straight? Thanks!

[@poz4860]

They’re ‘crowning’ the studs. All studs will have a natural curve to them, so putting the bows all the same way makes it easier to straighten later and end up with better results 🙂

[@JammyJay86]

@@poz4860 Thanks that makes perfect sense!

[@flynndecker2921]

Milwaukee are announced 3 new circular saw the other week a new left line sight 165mm, left line of sight rear handle 184mm and right line of sight 184mm they look really nice smaller more compact and user fee

[@Chadzzy]

Mate you should just use a pasload, should look into dewalt 54 volt saw, would launch that saw if I saw it on a jobsite same as the guns

[@ryanpowell9522]

You need to take your framer apart and add more air pressure to the can.

[@ryanngalea]

Nice

[@clarkh4133]

How much did this cost the homeowner? Thanks!

[@reegynsilis3594]

Have you ever done commercial fit out work?

[@mixedmartialmayhem7703]

I have that exact issues with my hikoki framer.

[@adamali2886]

please upload the entire extension

[@dashpoxon7231]

Did u guys check for no asbestos?

[@DaveDoesCarpentry]

Yeah, it’s definitely not asbestos 👍🏾

[@HaydenKellas]

The ol nail gun hammer.

[@lbigjohnny]

Did you quote this job?

[@MightyHawx]

Whens the next pergola video?

[@gregj7916]

Everything looks rough….Aussie homes freezing in winter, sauna in summer,

[@sangazo]

there was no roof insulation before you took out those sheets

[@rosieisleng1102]

are those eaves not asbestos?

[@dickphan]

Fibre cement usually here in Australia...asbestos would be in anything before 90s

[@BrownBean19]

Kind of a weird ask but can u provide a definition of the terminology you use throughout your video?

[@-aid4084]

Hey quick question, I saw you using a cut piece as a template to make a bunch of circular saw cuts, is there any significant accuracy loss for the extra speed it gives you?

[@andarilhoblackpillimortal4579]

Andarilho 🐺👣👣👣

[@ekka6560]

Just buy a Pasloade - problem solved.

[@g_force3857]

Some say Asbestos, that place has it don’t you guys have to do anything about it ?

[@Dundee.]

It's villa board not asbestos

[@g_force3857]

@@Dundee. better check that mate… villa board has it in it too

[@Dundee.]

@@g_force3857 only the stupid early villa board when they changes over to it could have cross contamination but not a house as new as this one appears to be

[@Bassing1976]

As a roofer please no box gutters in peoples house (nothing but problems)

[@darcyyoung4428]

I was looking for a comment like this, I’m a chippy in Australia and I’m always hearing this. Is that because with overloading water it runs into the roof rather than outside of the house?

[@blairlloyd1483]

Yah talk about tools tools where’s the drop saw set up at…

[@DaveDoesCarpentry]

I didn’t use it much in this video so I didn’t talk about it, but we had a Bosch mitre saw out 2:36

[@cuzakuru]

Alot of shit talkers in the comments smdh. Give the lad a break. Hes giving it a fkn go so go eazy tiger

[@garystrahan4601]

I hope that the builder confirmed that those Eaves lining sheets you were demolishing out weren't asbestos.

[@dirkdiggler9334]

Get a grip

[@minhdaubu2363]

Cement sheet

[@Justme-ny9ju]

Theres always 1 potato head

[@user-vp4nc7uc5z]

@@dirkdiggler9334I’m a first year apprentice carpenter. Does fibro not have asbestos?

[@bentonturner1619]

@@dirkdiggler9334Dave didn’t exactly say anything about asbestos who knows ?? it is a very common material the fact these the sheets tore and flexed like that it very well could have been safe but who knows ?

[@ACDZ123]

Matchstick houses ...

[@timemasterhms]

I don’t care how experienced you are, wear a respirator when demolishing things. Your older self will thank you

[@iammattbarker]

Interesting video. For the narration be mindful of how you end sentenced with a tone drop. Just keep on the same note as the word before. It doesn't sound natural. Keep up the good work.

[@jaymcbakerk]

What a weird comment. Chill out bro. This is a man going about his job and telling us how he does it. He’s not a professional TV presenter.

[@novosib9017]

ah bro you picked the wrong nation to create a KZbin carpentry channel. Every knob and his beer is going to be picking and giving you shit advice. Other than that, its not easy to excel in this industry on your own, i personally used their negativity as fuel to expand my business.

[@Jimmyphotos-q5z]

Shit tools as well you are killing me . Buy a Hilti framer and every thing else Festool .

[@Bigergism]

I like the content bro, but you talk the entire time, like the whole time, every second you are talking. It’s to much for me to handle my man I have to just watch you work on mute. You talk a lot..

[@DaveDoesCarpentry]

Thanks for the feedback. The footage I recorded all has the radio playing in the background so I couldn’t use that audio much, so for this video I had to talk over the whole thing.

[@funkyseefunkydo9622]

I like how you talk a lot. It’s very interesting and informative.

[@emilytrestrail8572]

Love the talking! Don't stop, it's perfect.

[@jaymcbakerk]

@@DaveDoesCarpentry don’t worry about this bloke, there is always one whinger. You can’t please everyone. I love the commentary keep it up.

[@Jimmyphotos-q5z]

The bathroom with no 50mm step down before the slab was poured , who the f$&k is this builder ? no supervision to the form work amateurs .

[@tommyluke6407]

That would be an Addition? Never heard of a construction extension.