Building an Fightstick with Brook PS3/PS4 Breakout Board and Art's Hobbies Case

This is a follow up to my last video
www.youtube.co....
Today we put together a fully functioning PS3, PS4 and PC arcade stick.
Purchase all parts necessary for this build here
focusattack.com...
www.paradisearc...
www.tek-innovat....
find me on
/ fundando
/ fundando

[@Nihiliste-]

GABEN!

[@lyl14ghost]

When i saw my lord in the background i just shout out "Gaben, Woooo ya!"

[@kevinm2832]

That case is classy as fuck

[@apexmoto9610]

That case is pure win, props on the build.

[@MobileDecay]

Building an fightstick? Lol. Sorry had to point it out like a dick. 😁 Stick looks awesome though!

[@Fundando]

lol

[@GoldenGrenadier]

AN fightstick and not A fightstick? You speak perfect English; what possessed you to put AN before fightstick?

[@toapsingh]

Maybe he was going to speak arcade stick instead of fight stick

[@KillerRiceCracker]

where did you get the case? cant seem to find cool looking translucent cases anywhere

[@XoDahuaoX]

I have a feeling your next built will feature the UFB. SRK member!

[@1andOnlyJDauntless]

Is the: *WINIT Zero Delay LED Arcade Game DIY Parts USB Pc to Joystick Encoder + 1 X White 5pin 8 Way Joystick + 10 X Ring-fixing White LED Illuminated Push Button for Mama Jamma & Arcade Fighting Games Roll over image to zoom in WINIT Zero Delay LED Arcade Game DIY Parts USB Pc to Joystick Encoder + 1 X White 5pin 8 Way Joystick + 10 X Ring-fixing White LED Illuminated Push Button for Mama Jamma & Arcade Fighting Games* (Amazon it please) compatible with the PS4?

[@Yayashiii]

I never saw you use the PCB Mounting Pieces (set) that you left on top for the whole building process. are they not necessary?

[@justdev8965]

Very valid question. No response. Hmm

[@cpnproductions832]

that camera angle is giving me a headache

[@TheKingoftheriff]

You make great videos on the subject, too bad you have so few subscribers. Quick Q, wasn't that stick kind of light?

[@Fundando]

yes the stick came out kind of light. they do have a solution.to add some weight on their site though.

[@RockandMetal645]

Is there a switch to change the joystick from Dpad to X/Y mode like the Mayflash sticks?

[@supersonicblasts286]

where did you that color USB cable

[@Fundando]

amazon

[@freehugs4624]

How much can I pay you to make me one lol

[@Fundando]

check out allfightsticks.com they will hook you up

[@TheCathordran]

Hey, i know it's been quite a while, but what color did you order from Art's for the top. That blue looks clean.

[@Fundando]

this was a limited edition color they don't normally stock

[@TheCathordran]

@@Fundando Has the stick held up? My only concern is it breaking. I'm not too rough but was just wondering if its worth splurging and getting a metal one.

[@Fundando]

@@TheCathordran metal would definitely hold together better. I would definitely pay the extra money and get one from allfightsticks. dude makes a legit case. If you want a wooden one I can give some recommendations as well. allfightsticks.com/

[@gwendolynhunt2075]

Hello! What exactly did you use to attach your brooks board to the tek innovations pcb panel?

[@FELIPEROD92]

It's possible include Share and Options buttons with this board?

[@crimsoneye575]

Are the enclosures in AFS compatible with Myoungshin joysticks?

[@Invincible-yf6nr]

Great job! Did you buy the blue disconnects at Paradise arcade shop? Because I haven't seen those at Focus Attack. Also I seen the PCB you use at Focus Attack for $40, however, the one I seen needs the wires to be soldered. May I know where exactly you bought yours please? Thank you!

[@Fundando]

+Invincible 2016 this PCB is available from paradise arcade shop. The blue quick disconnects I got from Amazon/

[@Invincible-yf6nr]

+Fundando (Fundando) thank you, I tried looking for some on Amazon but I bought the wrong ones. Can you provide me the link to the right ones?

[@Fundando]

+Invincible 2016 www.amazon.com/Install-Bay-BVFD110-Connector-100-Pack/dp/B005HQ4UNA?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

[@dharma.vibrates]

I bought one but not able to use where I'm lacking im confuse, any help much appreciated

[@jedexodus8602]

How do you drill the holes in that material. Are they bought pre-drilled?

[@Nightwalker377]

The case you ordered from Tek-Innovations.com, did it come pre-built. Or did you have to put the individual panels together yourself?

[@Fundando]

I put the case together from the panels. They have a video on their youtube channel on how to assemble.

[@theabominablekenny]

Hate.

[@Pobega]

Where did you find that awesome braided USB A to B cable?

[@dannyingamells6642]

Was looking for a method to "switch sides" and have the joystick on the right instead of the left- could it be possible with Art's case that a simple flip would work?

[@Fundando]

It is possible. I actually tried with this case when I was in the process of building.

[@faraday7879]

Great vid man I think I'll try this but I have to ask a few questions 1: how is the build quality because this is my first stick and I know i will hit it hard 2: I probably could find one but is there a non-clear bottom so I can hide the cabling

[@Fundando]

This case is cool and cheap, but check out allfightsticks on ebay for a quality metal case with solid color bottom plates.

[@ivanpalavra3750]

How does 1-4k and 1-4p translate to the face buttons and shoulder buttons of a controller?

[@destrax3739]

1p - square,2p - triangle, 3p - R1, 4p - L1 1k - cross, 2k - circle, 3k - R2, 4k - L2

[@senpaibryn6196]

Would it be posible to connect 4 Cherry Mx Switches instead of the joystick for directional inputs?

[@Fundando]

connection method would be the same as the buttons. just daisy chain ground and run signal to each switch

[@PeachesYummyPie]

anyone know what would be a cheap pcb board for pc, i will be using the fight stick for xbox 1 and pc ???

[@benaswow]

cursayerdragon good luck getting a cheap one for xbone, best option is a brook adapter

[@yusufahmed2011]

How did you Frankenstein the braided cable ,and could you possibly post of tutorial of it.

[@Fundando]

+FrozenSavage Since the braided cable had a micro usb, I just chopped the end off and put a type B connector from another cable. It is pretty straight forward as all the wires within are color coded.

[@beazydallas]

My joystick doesn't have the 5 pin connection, it's standard quick connects just like the buttons. Will this board be useful?

[@Fundando]

Yup. Only difference is wiring individually

[@w0olfie]

Am I able to convert my Super SF TE fight stick to play on PS4?

[@AvengerII]

With the right PCB, you can make just about any joystick work with a PS4. The Brooks Fighting Board latest revision is preferred because you don't have to solder to the board but you pay more for that. It's all screw-in post terminals or buy the proper wire harnesses to make the connections you need to.

[@rogermorse_]

lol lord gaben was a nice touch

[@moonshinobii2514]

man I would buy this....is there a store that sell stick that look this cool?

[@Fundando]

There are plenty of custom shops out there. check out allfightsticks.com vickomods.com foe hammer shop

[@HeavyJ713]

How do you do custom artwork on these things

[@hectorlgarciamartinez690]

This pcb would work for a hitbox? Has the socd thing?

[@Fundando]

Yes. SOCD CLeaner built in.

[@xXxSasukeTakaxXx]

do you have an email i have an crazy stick idea but im not sure if it will work

[@chrismayo1065]

how much to make me one?

[@jimmihenry]

Could you post the Button Layout Dimensions for a DIY project?

[@Fundando]

slagcoin.com

[@o.k.i.c.u6292]

does this operate using MIDI by chance?

[@Fundando]

www.otk.it/mjoy/

[@DenatBalla]

really nice fight stick!

[@timmyv694]

What did this build cost?

[@Katir.0]

can i use 2 analog joystick on this pcb like dualshock controller

[@Fundando]

It is not compatible with analog.

[@veerasakbenjadol6957]

Can I use this PCB with broken Madcatz TE2+ for PS4?

[@SirJeeble]

If by 'broken' you mean plugging it in does nothing, then yes.

[@mattfoster1493]

That blue is amazing!

[@subigirlawd_7307]

Make one that lights up bright

[@Fundando]

Please see my other videos. I have a couple tutorials on how to add lighting to a fight stick that is compatible with this setup. kzbin.info/www/bejne/o3zXqmSelNWda5Y

[@subigirlawd_7307]

+Fundando (Fundando) Thanks! 😺 I'm going to binge on your channel soon

[@Mr.Waffullz]

What color option is that from tek? For the top panel.

[@Fundando]

+Andrew Reeves It was a limited color run Mirror Dark Blue.

[@Mr.Waffullz]

+Fundando (Fundando) damn, you think it'd be a way to put in a special request for a mirror blue? I know he's probably busy with emails to respond.

[@NoName-rg3np]

I want one!!!!

[@MostlyDrew]

What shop did you get the case from?

[@Fundando]

the last link in the desciption

[@BarryAllen..]

how about a two player stick

[@jesuszamora6949]

I imagine you'd just need a board for each player.

[@whatweknow]

donate me that stick

[@Evrenovic]

Make one for me? Name your price!

[@brandonbou4016]

that cool fight stick case did you build that yourself

[@Fundando]

+Brandon Bou I only assembled it. Check out www.tek-innovations.com/arthobbies/ you can custom order it in many configurations.

[@brandonbou4016]

+Fundando (Fundando) o I know that site I use to get my artwork done from there forgot the dude make case too

[@briandoyle1168]

Fundando if you dont mind me asking what exactly did you get specification wise

[@Yayashiii]

TEK-CASE S1-B When you go on the website and click on that case, on the checkout window it gives you a chance to customize some things. Such as: Color, Etching (sockets) and Text

[@dylanbrashears3725]

For a Hitbox would I just add a separate/more connection Daisy Chain for the movement buttons? And then plug in the Quick Releases for them for each Direction on the PCB? Just wanting to Verify as that's what I'm wanting to make and your video has a lot of quality and care put into it.

[@RymannFilms]

this work on Mk x on ps4? my xarcade makes the game lag

[@Fundando]

Yes it will.

[@MegiddoTheImmaculate]

Please flip this video and re-upload it. Why is this camera angle so awful?

[@grosgogogogt]

should have extend a port to the case and make the cable removable

[@D34thM4r10]

do u sell over seas??

[@Fundando]

I do not sell anything. I just make videos.