Рет қаралды 71,431
PLEASE SUBSCRIBE TO MY CHANNEL!! KZbin has changed how they do advertising revenue and I need 1000 subscribers by Feb 20, 2018!!! Thanks for watching!
In this video I make an inline carbonization device. I then go through the process of carbonating a keg of beer with it.
You can find carbonization charts on line, just google it.
I had a good portion of the parts on hand, but if you had to purchase, them here is what you need and the approximate cost. It will probably cost somewhere in the neighborhood of $80, if you have to buy everything. One thing I didn't mention in the video was that right at the end of the hour I spent carbonating the keg the old 9 volt, 1 amp power supply I was using failed. I have since purchased a 12v/4amp power supply to replace it. Hopefully it will last as it is more appropriate.
I used threaded pin lock and ball lock keg connectors, so I can easily swap them out. I used 3/16" ID hose for the aeration stone fitting and 5/16" ID hose for the beer lines, on 1/4" fittings (the pump said it had 5/16" barbs). I plan on swapping the brass fittings out for stainless ones with 5/16" barbs whenever they get here (e-bay - China $2.69 each).
Parts:
Carbonization/Aeration Stone Fitting ($10 shipped) -
www.ebay.com/i...
Self Priming Pump - 12V - 100psi - 1 gallon/minute ($16.50 shipped) - www.ebay.com/it...
Pump Power Supply - 12V/4A ($6)
www.ebay.com/it...
Stainless Steel "T" ($2.25 + Shipping) - www.supplyhouse...
Barbed Hose Fittings ($2.25 + Shipping) - www.supplyhouse..., or at Menards/Lowes/Home Depot ($3).
Hose - ($2.99 ea for 10 FT, 3/16" and 5/16" ID ) - Menards, Lowes, Home Depot
Thumb Screw Hose Clamps - ($5 for a box assortment of 26) - Harbor Freight - www.harborfreig...
Keg Connectors ($14 a set, pin lock or Ball Lock) -
Pin Lock
www.ebay.com/it...
Ball Lock
www.ebay.com/it...
1/4" Swivel nuts for Keg Connectors - ($2 - $3 ea) - www.homebrewing...
www.homebrewing...
CO2 Fittings - Depends on your tank, probably the swivel flare nuts above at $2 - $3 each. I used quick connects and a valve that cost about $8.
That should about cover it.