Building an invert roller speargun!!

[@DerekAlexander-yv9dr]

I love music you chose, I remember the songs from my childhood.😊

[@kevsventures7721]

Thats a beauty

[@AndrianBLUE]

Thanks a lot!

[@arysandrodossantos9300]

Well done dear friend! Amazing build 🤙🤙🤙

[@AndrianBLUE]

Thanks a lot!

[@deewaagiakoko8234]

A lot of art work 👍

[@AndrianBLUE]

Thank you my friend!!!

[@MadMax-zn9oh]

My dad made spearguns all by hand in the 60's no machines cause we were low-income. But the idea 💡 came from WW2 When bullets was not around when my dad and fellow Filipinos made these spearguns to spear the Japanese!!

[@jpemonides]

Very nice, thanks for sharing ! :-)

[@iamremy-kl3xm]

Nice Build

[@AndrianBLUE]

Thank you. You can check in later videos how the speargun has evolved!

[@StaunchIndustries]

wow!!!! really nice!

[@AndrianBLUE]

Thanks a lot!

[@8InchShaka]

I'm currently building an invert similar to this, but still a way I have never seen done. It was important to me to have my trigger guard AND most of my handle molded into THE SAME blank. There is a huge issue I'm having which is shaping is very difficult with a gun that tapers on 3 sides, and can't run the router down all sides and just be done quickly.. With that said, I'm finally about done, and then the fun editing of all the filming I have been doing can begin. Also, with the price of Teak here in Hawaii, the CNC option is not practical as you need A LOT more sacrificial material. Then again, I've had to remove a lot of material just with having my trigger guard and handle in the same blank.

[@AndrianBLUE]

Hi. When I started designing my first build I wanted to have the whole speargun from one blank too. But I abandoned the idea because too much material would be wasted and was harder to build on the cnc. Teak is expensive here too. When you have the video ready let me know. I am really interested to see how you worked on it!

[@8InchShaka]

@@AndrianBLUE I actually didn't waste too much with a blank 3.75" x 3.75" (95mm x 95mm) since I have been making cuts and not planing material everywhere, maybe ill make more pathos replacement butts for people who keep asking. Your CNC blank needs a lot more material just for clamping (but I'm sure you could figure a way to epoxy in some clamping and centering supports to avoid such a large blank) but will definitely let you know once I drop the video. I'm compulsive about adding the details I couldn't find in other KZbin videos, like how I made my enclosed track. I've posted some photos on the 8-inch-shaka Instagram. Feel free to check out current status there too.

[@AndrianBLUE]

@@8InchShaka At the moment I use mdf glued on the sides of teak so I do not waste teak wood just for having clamping space.

[@sot11cat]

This is a massive loss of material. The final product is fine though! Congrats from Greece!

[@AndrianBLUE]

Thank you! We are optimising the process to reduce the material wasted.

[@andribulan]

Amazing

[@AndrianBLUE]

Thank you!

[@andribulan]

@@AndrianBLUE you are walcome

[@jessespiller3801]

More videos please Andrian!

[@AndrianBLUE]

Thank you for your comment!!! Lockdown restrictions don't allow us to go to the sea at the moment. I hope we have the chance to get back in the water soon!!!

[@Anthony_Spearfishing_Halkidiki]

Φοβερό μελετημένο όπλο!!!

[@AndrianBLUE]

Σ' ευχαριστω πολυ! Να σαι καλα Anthony!!!

[@OscarGalvantuckersub]

que p,. pasada compañero!! preciosidad de fusil!!

[@AndrianBLUE]

Thanks! You can check here how the design has improved! kzbin.info/www/bejne/g6uWkohvjNyKicU

[@notpastranapastrana2403]

Just a very explorative question here..Is it possible to build an invert roller that is COLLAPSIBLE into 2 parts? looking into getting a travel gun

[@AndrianBLUE]

Hi. We do not know if we will build something like this in the future. At the moment we do not have such an option. You can see our products on our eshop. andrianblue.com

[@malthus101]

can you do a mini size of your logo design too? I'm a minimalist kinda guy... 😉

[@AndrianBLUE]

Hi. The logo has become even bigger! 😂 You can check our products here. andrianblue.com If you are interested contact us via email and we can see if we can do something with a smaller logo. Cheers.

[@malthus101]

@@AndrianBLUEI like your fish logo - maybe just that, and Odin at the heel... ;)

[@juannavasroman8403]

Hazme uno Adrián !!

[@ngarmy6602]

Man very nice gun , beautiful,and looks like it got good power, you build machine from CNC machine ?

[@AndrianBLUE]

Thanks!. Yes we built the machine using other cnc machines

[@ngarmy6602]

@@AndrianBLUE very nice, its not cheap, would love to do spearfishing whit you if you come to croatia, I'm finishing highschool I'm CNC operator I do lots of things, spearfishing, fishing, kickbox, MTB ,pyrotehnic

[@AndrianBLUE]

@@ngarmy6602 Nice! Cnc machining is another passion we have besides spearfishing! Sure and if you ever come to Greece you can contact me and if possible we can dive together!

[@ngarmy6602]

@@AndrianBLUE O man amazing, I'm 18 in month ,and finishing my driveing hours , when I get licence I can go everywere I want , do you have instagram wo I xan text you when I can come

[@AndrianBLUE]

@@ngarmy6602 Great! Sure our instagram is instagram.com/andrianblue_spearfishing/ You can also follow us on facebook facebook.com/profile.php?id=100076344241409 And also my personal profile is this facebook.com/dimitris.andrianopoulos.7/

[@meronbmalintoy7963]

❤👍

[@tristancombalot-giorgi1875]

Bonjour, je trouve tous vos fusils merveilleux et c'est pour cela que j'aimerais bien créer le miens cependant je ne m'y connais pas très bien. Qu'est-ce qu'il faut niveau bois ainsi que outils pour réaliser un fusil j'aimerais bien partir sur un roller. Bref toute info sont bons à prendre donc n'hésitez pas même si c'est niveau site Internet qui vend un peu de tout à propos de ce sujet, ce serait génial. Merci

[@AndrianBLUE]

Hi. We use Teak wood but you can use other wood too like mahogany, sipo, iroko, sapele etc. We do sell parts for spearguns on our website here, andrianblue.com Many spearos around the world that like to build their own spearguns trust our products. If you want more information you can send us an email at [e-mail] to discuss further.

[@yacinexoxo8416]

Can u help me with the 3d model for cnc

[@angellapinig8619]

Amazing design sir #angelbacaling

[@AndrianBLUE]

Thanks a lot!

[@Thichvivu999]

Tôi đến từ việt nam.trông chúng thật là đẹp

[@AndrianBLUE]

Thank you

[@KoukwiththeHook]

💪💪💪👍👍👍

[@alexharalambiev2873]

looking real good, what's the effective range of this gun?

[@AndrianBLUE]

Hi. I haven't done proper testings on targets but my estimation is around 5-6 meters.

[@RhinoStar0]

Really well made. Good job mate. BTW whats the blue material down the centre of the gun?

[@AndrianBLUE]

Thank you! It is epoxy resin with blue powder pigment.

[@ivanssitic]

What setup are you using? Shaft and bands? Thanks

[@AndrianBLUE]

I use 7mm 1.30 shaft and 1x18 and 2x14 pathos nitro bands

[@ArifudinMyf]

through my online shop so that I can buy this speargun ??? I want to have it very good and very precise to make. I like the quality of the goods, I am Indonesian

[@AndrianBLUE]

Hi You can contact me at [e-mail]

[@Peeeeq286]

🔝🔝🔝

[@temanariihauata9209]

Bonjour vous vendez vos arbalete ?

[@AndrianBLUE]

Hi. Yes we do. You can check our products and prices on our website. andrianblue.com

[@jarigibbs9704]

Nice gun bro can i buy one u should sell

[@AndrianBLUE]

Hi. Contact me at [e-mail]

[@thelearner5997]

How much di you sell for this gun?

[@AndrianBLUE]

Hi. For any info you can contact me at my email [e-mail] or at my facebook page AndrianBlue.

[@Marvel440]

Παρά πολύ ωραία δουλεια με πανέμορφο αποτέλεσμα!! Όταν θα πάρω την απόφαση επιτέλους να πάρω ξύλινο θα σε επισκεφτώ για λεπτομέρειες . Πολύ όμορφο μπραβο με τρέλανες να σου πω την αλήθεια μου. Αθήνα είσαι?

[@AndrianBLUE]

Σ ευχαριστω Χρηστο! Να σαι καλα! Θεσσαλονικη βρισκομαι. Το email μου ειναι [e-mail]

[@Gewang_Karat]

what kind of wood that you used ?

[@AndrianBLUE]

The wood is teak.

[@fisniksulaj1]

Amazing work man congrats ,how much cost a machine like this ? Iwould like to build my own speargun aswell , i also design and dive perfect match ever 😊

[@AndrianBLUE]

Thank you my friend. We built this machine so its cost was lower than if we would buy it ready to work. The price range can be large wide depending on what features the machine has. As a starting point I would say around 20k euro and it can go up quiet a lot. Dive safe my friend!

[@HülaguHan63]

@@AndrianBLUE 20k euro ? You must be joking….!

[@kveltsi]

Αυτά είναι... Καλή αρχή. Δύο 105 θέλω εγώ. Βάλε και αυτόγραφα επάνω .

[@AndrianBLUE]

Χαχα! Δεν ξερω αν θα το βγαζω σε 105 γιατι το εχω σε 100 και 110.

[@kveltsi]

Εννοείται 110. Αλλά θα έρθεις Σαντορίνη να το ψαρέψουμε.

[@AndrianBLUE]

@@kveltsi Εννοειται θα ερθω! Εχω ερθει παλιοτερα αλλα δεν εχω βουτηξει εκει!

[@kveltsi]

Δημήτρη ένα τηλέφωνο να μιλήσουμε

[@AndrianBLUE]

@@kveltsi Κωστα στειλε μου στο mail μου να στο στειλω για να μην γραφω εδω στο youtube το κινητο μου. [e-mail]

[@jovenciogonzales886]

Mag kaano espargun

[@AndrianBLUE]

thanks. You can check the latest development of the speargun!

[@vincentmisalanang6836]

How much your speargun 125cm

[@AndrianBLUE]

Hi. I build up to 110cm at the moment. For any info contact me at [e-mail]

[@berniesboardhouse8078]

Price ??

[@AndrianBLUE]

Hi. You can check the price of each of our products here. Https://andrianblue.com

[@laikunwati]

Berapa harganya kalau di kirim ke indonesia?

[@AndrianBLUE]

Hi you can check our products and shipping costs on our eshop. andrianblue.com

[@stavrosvergopoulos6804]

Που μπορουμε να δουμε τα ψαροντουφεκα

[@AndrianBLUE]

Καλημερα. Επικοινωνηστε στο email [e-mail]

[@tonpesca8458]

Qual tipo da madeira ?

[@AndrianBLUE]

Teak

[@jelitafa6512]

Harga y brapa ?

[@kazueteresagalgo5779]

Too much wood wasted.

[@ΘΕΟΦΙΛΟΣΓΙΑΝΝΙΟΣ]

Πολύ ωραία δουλειά κ μεράκι μπράβο φίλε. Στείλε μου κάτι να επικοινωνήσω μαζί σου ευχαριστώ

[@AndrianBLUE]

Ευχαριστούμε πολύ! Το σχέδιο έχει εξελιχθεί από αυτό το βίντεο. Μπορείτε να δείτε βίντεο στο κανάλι μας και επίσης να δείτε τα προϊόντα μας στο eshop μας. andrianblue.com. Υπάρχουν μέσα στο site μας και στοιχεία επικοινωνίας, τηλέφωνο, email, σελίδες facebook instagram κλπ.

[@yitao8366]

安德鲁

[@gssmith1986]

I'm sure it's a good gun, but using a CNC is not craftsmanship. Watching a router run isn't entertaining either. I quit at 3 mins,

[@AndrianBLUE]

Sure mate. If you think it is easier to build something with CNC then I encourage you to try it. Design a speargun in CAD, then program it in CAM, then machine it on a CNC machine and then come tell us how easy it is and how it doesn't require craftsmanship. If you think you can build a structurally better speargun by hand than with a CNC then do it and bring it here and we will measure together how straight and symmetrical it is on the CNC and compare it with one built on a CNC machine.

[@tatanegabian]

@@AndrianBLUE Hi , what program do you use to design your gun, Fusion 360? I already make my own speargun by hands but I'm going to get a CNC machine soon, so my first step is to design speargun, how many times do you spend to design it on computer ? Very nice gun by the way, well done ;)

[@AndrianBLUE]

@@tatanegabian Hi and thank you! Yes I use fusion360. It has taken a lot of time actually. I have been designing it for around 2 years (designing, building, testing, making adjustments, building, testing etc...) It is a fun process! I hope you enjoy it! Cheers!

[@aburgheim]

And to think that i shot my fish in Indonesia living on a remote island with a handmade speargun!! The locals made it with the most simple tools...... the barb was a nail, the rubber from bike innertube, the spear concrete rebar....... and i shot amazing fish believe me.... 30.000 Rupia........ people what are you doing?? This is all BS!!

[@AndrianBLUE]

My friend. You can tell the time by sticking a stick in the ground and watching the shadow or you can wear a rolex. It's your choice. You are free to do whatever you want.

[@aburgheim]

@@AndrianBLUE no middle ground.....mmmh? The guns get bigger and fancier and the fish disappear...... you think that's connected??

[@AndrianBLUE]

@@aburgheim Ofc there is middle ground too. You think the fish population decreases because of the bigger spearguns?

[@aburgheim]

@@AndrianBLUE I am so incredibly grateful!! You are really getting my point, at last, an individual of high iq versus some, where iq equals shoe size.... dont you think einstein??

[@AndrianBLUE]

@@aburgheim No I don't think... It is the opposite.... Bigger guns is the result of the population decrease (from other reasons) and they have been developed because the fish are less and harder to catch.