Building Bluetooth Speaker - Stand for Phone and Tablet

Building Bluetooth Speaker
Stand for Phone and Tablet
----------
Buy link 3d printer filament:
1. www.geeetech.c...
2. www.geeetech.c...
3. www.geeetech.c...
4. www.geeetech.c...
5. www.amazon.de/...
6. www.amazon.de/...
7. www.amazon.de/...
----------
Follow me on other platforms:
Fan page: goo.gl/bjttDJ
Te page: goo.gl/r27hXE
My channels:
Nguyễn Thanh Hải channel: goo.gl/rkroxb
TE channel: goo.gl/dKHpHv
Thanh Hai channel: goo.gl/5p4ujZ
----------
Don't Forget to like, comment, share and subscribe to my channel!
----------

[@zoon_video]

Excellent work! MDF material is the best for the speaker system case!

[@youtuba-mamyt-rahal]

Да, мужик молодец. Есть чему поучиться. Иногда какая-то мелочь и не знаешь как реализовать тот световод или ручку в неудобном месте прикрутить, где отвертка не пролазит.Правда, планшет перед динамиками - это кринж...

[@MRNVCDIY]

great video. I want to make one for myself just like yours.

[@samd3231]

C'est bien mais il faut beaucoup de machines que l'on a pas forcément lol sinon c'est un joli bricolage sympathique

[@jimthesoundman8641]

22:53 So you have three LED lights, two are near the woofers, but what are they connected to? Evidently the woofers themselves so I'm confused, the woofers use AC, but the LEDs need DC, how does that work? Then the other blue flashing LED, what is it connected to and what does it represent? Bluetooth signal activity? I'm not certain.

[@Motoralbi]

it looks like the two green LEDs have a diode in series to block any reverse voltage. If connected to an amplifier output LEDs will light up as the voltage can get to 3V, which is around the voltage of green LEDs; since he's using a 3W amplifier, it's very likely that the amplifier voltage will never go above 3.5V, so the LEDs should not burn, considering the voltage drop on the other diode (0.2 to 0.7V).

[@jimthesoundman8641]

20:34 It would be nice if you could explain what is going on here. I think you are removing some sort of zero ohm resistor to replace it with a switch, but I'm not sure.

[@Motoralbi]

that's the onboard blue LED which he removed so he could connect his own blue LED

[@roshwyinstaicoon2593]

Nice video brother.

[@CathySiegert]

23:58 Casse-o-Player ^^

[@vuovan5810]

hãy cho tôi biết tên của cặp loa treb?

[@TE.]

Nó là loại dùng cho xe hơi, mua lâu rồi nên mình không nhớ tên

[@anhsaont]

4:12 dùng cưa bàn mà để tay áo dài như vậy nguy hiểm bạn ơi.

[@ThanhHai85]

Ừ, lúc đó mình quên kéo tay áo lên. Lúc sau cưa mấy tấm nhỏ mới thấy tay áo gần lưỡi cưa thì mới kéo lên

[@jimthesoundman8641]

Matthias Wandel did an entire video about long sleeves and table saws, and he found that there is not really any danger, the blade just cuts through the fabric, it has no way to grab it and pull your arm into the blade. But yes, it's a bad idea to have long floppy sleeves, especially near something like a drill press or lathe.

[@markus4325]

Я смотрю параметры Тиля - Смолла вообще вам не знакомы. Таким динамикам явно требуется больший объём и фазоинверторы тоже от балды наляпаны! Видео чисто для контента, чтобы привлечь как можно больше зрителей.