Building Suzuki RF 1100 - Episode 1

  Рет қаралды 3,869

Adikxx

Adikxx

Күн бұрын

Пікірлер: 27
@wandoom
@wandoom 3 жыл бұрын
Hello Adikxx, thank you for sharing those hard find stuff with us and even makeing video with it. I am always looking forward how to improve this awsome bike in the way that we do not wreck it with selfish upgrades. This year i am looking forward to make CV carbs work with pod filters. last year i spend a lot of time to find how it make possible and want to ask you guys if someone manage to do it and with what kind of pods and jet kits is it possible. The specialist from 6 sigma told me that the CV carbs need to have velocity trumpets or some kind of tubes with uknown lenght to calm down the air sucking in to the body of carbs. So i am thinking about 3d printed velocity trumptes or 90 Degree Elbow Silicone Hose with pods because of the angle of carbs and space between carbs and fuel tank. Anyways, thank you for clip and wish you best luck :)
@Adikxx
@Adikxx 3 жыл бұрын
Hi buddy, hope those video will be helpful. When it comes to pod filters on CV carbs it sadly can be a can of worms. It really is very difficult to get the bike running right with them on. I had my Katana with pods and although it ran decent i would not call it perfect. You almost always end up with a flat spot in the power curve and no matter what you do that dip in power always stays there. Ideally you'd want FCR carbs with pods and proper setting them up on the dyno. Either way thanks for your comment and hopefully your carbs project works out well.
@kwakkers68
@kwakkers68 3 жыл бұрын
@@Adikxx +1 pods are more trouble than they're worth!
@karlvanboxel561
@karlvanboxel561 Жыл бұрын
Was always taught to remove head bolts in reverse order to tightening sequence😮
@kwakkers68
@kwakkers68 3 жыл бұрын
This'll be a great series, looking forward to seeing more installments! Been wanting to do this for ages, too :-)
@Lochwood92
@Lochwood92 3 жыл бұрын
Brilliant video.. always been scared to take the top off an engine but you make it look so simple. Loved that 👍
@Blingsby
@Blingsby 3 жыл бұрын
Thanks for sharing, this is such interesting project to follow.
@DylanGSXR
@DylanGSXR 3 жыл бұрын
Fantastic mate , 👍.so looking forward to this ..
@AlexanderPasechnik
@AlexanderPasechnik 3 жыл бұрын
Cool video!
@ZeronXL
@ZeronXL 3 жыл бұрын
I just saw the title and clicked like!
@modoudrammeh
@modoudrammeh 3 жыл бұрын
Would be good if you gave us a back story Ie About the bike what's wrong with it How much you bought it for and the intent ect
@Adikxx
@Adikxx 3 жыл бұрын
There's nothing wrong with the bike, it's a lovely looked after example. I decided to do this build cause i wanted more torque.
@mrAq_pA
@mrAq_pA 3 жыл бұрын
Some work ahead
@Adikxx
@Adikxx 3 жыл бұрын
Yes sir
@mrAq_pA
@mrAq_pA 3 жыл бұрын
@@Adikxx Dont forget ot update the FB group :) :)
@Adikxx
@Adikxx 3 жыл бұрын
@@mrAq_pA I will do sir
@VNAV_PTH
@VNAV_PTH 3 жыл бұрын
And the reason for this is to swap the head for the rf900 head because the 1100 head is wider? Any more issues with the build you are aware of?
@Adikxx
@Adikxx 3 жыл бұрын
Hi Yes GSXR head is too big for RF's frame. Few other serious issues. First is that RF head on Gixer block raises CR to about 18:1 so that needs to be lowered significantly. Second issue is PTV clearance, simply putting RF head on Gixer block is guaranteed piston to valve crash so that needs to be tackled too. Third issue is cooling ports in the RF head not matching Gixer's block, head needs to be modified(ports enlarged/reshaped) Then there are other things like small head refurb(stem seals, valves grind, clean up etc) Lots of work but very intriguing project.
@VNAV_PTH
@VNAV_PTH 3 жыл бұрын
Thank you very much. Looking forward to the rest of the series.
@pat-ko8888
@pat-ko8888 3 жыл бұрын
Cześć. Stary ile ty masz tych motocykli? Katana i gsxr1100? O reszcie nie wspominam.
@Adikxx
@Adikxx 3 жыл бұрын
Gixera niedawno sprzedalem. Zaraz po tym kupilem Zephyra 1100 i ZX9R :) Do tego RF 1100 buduje i rozgladam sie za VF 1000 jeszcze bo te V4ki sa super. UWIELBIAM stare motocykle ! hehe :)
@pat-ko8888
@pat-ko8888 3 жыл бұрын
@@Adikxx ogladam film z remontu zacisku w rf, juz zdjalem caly uklad z motocykla, zaciski-przewody-pompke. Jutro rozkładam a jak przyjdą przewody w oplocie to wrzucam zrobione na moto. Kupiłem też identyczne kombinerki do tłoczków. Twoje video pomagają mi pokonać moje tzw. "pierdolone sceptyczne nastawienie" bo zawsze sie boje, ze zepsuje.
@Adikxx
@Adikxx 3 жыл бұрын
@@pat-ko8888 Hehe nic nie zepsujesz, RFy to dosc przyjazne mechanikowi motocykle. Ja rbie teraz swoja Ninje 9tke i to jest ciezka praca w porownaniu do RF. 3mam kciuki zeby wszytsko wyszlo, pozdro
@pat-ko8888
@pat-ko8888 3 жыл бұрын
@@Adikxx udalo sie, robie przednie hamulce w fj1200. Tłoczki wyszły, po rozsądnyn podgrzaniu calosci do okolo 130stopni wstrzyknalem w tłoczek 2cm3 wody i puscilo, tłoki czyscilem papierem 1200 i 2500 na wodzie. W jeden zacisk tak zrobilem, udało sie nawet umyc i oczyscic oryginalne uszczelnienia wiec je zostawilem,ze składaniem nie było problemów za to drugi zacisk to była walka...musiałem coś wymyśleć bo uszczelki przeciwpyłowe ktore przyszły sa o te 1.5 mm zbyt małe bo porownywalem z oryginalami i tloczek je zagniatał. (oryginały za dlugo trzymałem w nafcie, zagapilem sie i powiekszyły sie o połowę). Naciagnąłem posmarowane reperaturki na tloczek, wstawiłem na - 20 na noc do zamrażarki. Zaciski rano polożyłem w słońcu i walke wygrałem. Tobie też powodzenia.
@kwakkers68
@kwakkers68 3 жыл бұрын
One of my friends off the RF facebook page recommended this to me - engine stand - At this price, means fabricating your own, not really necessary worth it. Although there's a lot to be said for engine stands which rotate - so you can pivot over when cleaning off old gasket and the like - www.ebay.co.uk/itm/114838112820 Thought it might be useful for people undertaking this project. :-)
@balmoralpjk
@balmoralpjk 3 жыл бұрын
Wear any Levi’s jeans in particular with your motorcycle?
@Adikxx
@Adikxx 3 жыл бұрын
Yeah, Levi Strauss always recommended. All day long man.
Building Suzuki RF 1100 - Episode 2
26:36
Adikxx
Рет қаралды 2 М.
Ferrari 348 Camshaft identification and placement
0:58
Idrissa Johnson - Northeast Local Media
Рет қаралды 5
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49
Yamaha XJ 650 Turbo Mini Restoration Part 3
12:57
Adikxx
Рет қаралды 281
Building Suzuki RF 1100 - Episode 8
19:58
Adikxx
Рет қаралды 1,6 М.
Coppersmith Dance of Metalworking
15:05
Mr. Taghavi
Рет қаралды 443 М.
The Secret Behind Quickshifter: How It Makes Your Ride Faster
12:39
FTS-Simulation
Рет қаралды 231 М.
Rebuilding my V Twin engine The Warhorse XRV750 Africa Twin
11:30
Adam Riemann
Рет қаралды 153 М.
Classic racing oilcooled GSXR1100 engine teardown.
22:02
Hoj o skojj 66
Рет қаралды 4,4 М.
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49