Set The Valve Clearance on a Suzuki GSX-R1100 Motorcycle

This video is a guide to set the valve clearances on a 1988 Suzuki GSX-R1100 motorcycle. It maybe similar to other motorcycles, but this video is not a substitute for using the correct motorcycle manual. Valve clearances are specific to individual motorcycles, and engine damage may result from using the incorrect valve clearances. At all times, the correct manual for your motorcycle must be used. The clearances used in this video may change over time, and no accuracy, validity, or representation is implied or given. You must consult the correct manual before attempting any of the procedures, techniques, or suggestions shown in this video. You use this at your own risk.
The information provided in this video is for entertainment purposes only and should not be taken as legal, financial, or professional advice. All viewers are advised to do their own research and seek the advice of a qualified expert if needed. The content of this video is based on the personal opinions and experiences of the presenter and is intended to be used for entertainment and informative purposes only. The presenter does not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability with respect to the content of this video. Any reliance you place on the information provided in this video is strictly at your own risk.

[@djricardodelrio1399]

I just bought a GSX-R1100 1989 , after owning a ZXR 750 H1, this video is excellent !!!! thank you so much !!!

[@MrTurboTurkey]

Thank you 1,000 times for this, there is hardly anything out there on the 1100s..

[@benjaminthurston6215]

Taking my 87 out of storage this winter…need to do this. Excellent vid. Thank you!

[@advbikeguy]

Congrats on getting the 1987 going!

[@youssefr7968]

Hi great video! Can you make one on how to take the engine off the frame ?

[@advbikeguy]

Let me check my footage. If I have it, I'll make a video.

[@artoahlholm8048]

Thanks. i have valves set too tight. Can it make some rattle?

[@uhtred7860]

Doing the valve clearances is so much easier and quicker on my 86 GSX-R1100 than my 87 Yamaha FZR1000, the Yamaha has 20 valves and uses shim under bucket, on the plus side, you only have to do them every 42,000 Km, but i do them at 30,000 to be on the safe side.

[@advbikeguy]

I agree, shims are hard work by comparison.

[@uhtred7860]

Don't forget to put all the little plastic caps back in the allen head tappet cover bolts, a previous owner had lost all mine and my OCD couldn't live with that, had to buy some more :-))

[@advbikeguy]

I wish that I had them. They are gone on my bike as well.

[@uhtred7860]

@@advbikeguy CMS Netherlands has them in stock.

[@johnnylighting11]

got a Haynes manual for my gsx and the order in which they have you set the timing mark and which valves to adjust is incorrect. so you can throw that in the trash and use the manual for clearances and torque specs only.

[@uhtred7860]

A haynes manual also led me astray on my 87 FZR1000, i found quite a bit of the info was incorrect after i found a Factory Manual that was printed by Yamaha. The trouble with many haynes manuals is they cover too many models in one book, the FZR one covered the 600, 750, (including the OW01) and the 1000s from 87 to 95, its too many, no wonder mistakes are made.

[@apobaxtolis]

Nice Video but can't seem to find the link for the special tool you mentioned

[@advbikeguy]

I am using the Motion Pro 08-0073 Tappet Tool Set www.amazon.com/Motion-Pro-08-0073-Tappet-Tool/dp/B000JP31T8 Look under other sellers.

[@advbikeguy]

BikeMaster Valve Clearance Adjustable Wrenches - - a.co/d/j3E9anx

[@luiscarloshurtado1618]

Hola buen dia perdon tu. Tienes el manual mecanico. Y. El mapa electrico

[@usablixxer9880]

I have a 2020 gsxr. It’s a top speed bike. Recently I have been unable to reach 207. Struggles to hit 200-201. Just did a compression test, tho I could only reach 2 cylinders at this time. But it’s clear already. Does this 1100. Not have shims like mine?

[@advbikeguy]

These early years of the 1100 have threaded screw and lock bolt as shown.

[@jimmydwonder]

2:30 is it expected that oil comes out from that side of the engine? It happened the same to mine, but I’m not sure should be oil with ignition pick-ups. Thanks

[@uhtred7860]

Yeah thats normal.

[@advbikeguy]

Its normal

[@secretinhomotopecas8168]

Tem como você tirar foto dos pontos do comando e da bobina de pulso dela tô com dúvidas sobre esses pontos para montar a minha 🙏🙏

[@advbikeguy]

The valve adjustment tool can be ordered from Amazon Motion Pro 08-0073 Tappet Tool Set www.amazon.ca/dp/B000JP31T8/ref=cm_sw_r_cp_api_glt_i_WNRDFX3V53E825KNXGAV

[@Wolfhoundofwolftrap]

Hi your video is excellent - can you tell me which size tool from the motion pro set you used for this engine please - they sell the tools individually and the full set is quite expensive and it would be great to just get the one needed Thanks a million

[@advbikeguy]

Here is another tool set that will do the same thing. BikeMaster Valve Clearance Adjustable Wrenches - - a.co/d/j3E9anx

[@RahmanBolakale]

👋 sir l need suzuki gsx750es gasket oil seed sleder 2:23

[@nigelbews3335]

Handy tool

[@advbikeguy]

Yes it is

[@advbikeguy]

This is where to buy the manual. www.repairmanual.com/product/official-1986-1988-suzuki-gsx-r1100-factory-service-manual-99500-39062-03e/

[@advbikeguy]

Is this what you are looking for? aphotovid.smugmug.com/ADVbikeguy/n-ppZZPm/i-TRD46BM