Building the GEE BEE R3 Mini: Full 3D Printed RC Airplane | Scratch Build with Bambu Lab Aero

[@knowledgebyte]

Excellent build and nice to see a stable GeeBee! Well done.

[@wayneewing4072]

Another fantastic build and accompanying video. Your ability never ceases to amaze me.

[@markoroolaid]

Hello, thank you so much

[@Hawkeyeflights]

Top job Marco, that looks like it flies even better than the big one!

[@markoroolaid]

:):) I believe the big GEE BEE is flying well now too

[@AJHewson1]

Really good idea. Build and fly a smaller one before flying the big one again ⭐️

[@Harshwardhanharsha]

Building this today !!!❤

[@markoroolaid]

@@Harshwardhanharsha Ok, very good😀😀👍👍👍

[@GeraldNagel-q8u]

Well done and thanks for sharing.

[@markoroolaid]

You are welcome

[@kiwookjang9887]

우와!! 3d 모델링 풀어가는 방식이 대단 하십니다!~~

[@markoroolaid]

안녕하세요 매우 감사합니다. 내 영상이 어디까지 왔는지 볼 수 있어서 정말 좋아요. 에스토니아에서 인사드립니다

[@adrianfichardt9082]

Great model, great build. You are very talented. Great job

[@markoroolaid]

Hi, thank you

[@olisandy0]

Nice and cute. With this kind of plane, lighter seems to be safer.... Hope big one on same way. Thanks Maestro

[@markoroolaid]

Thank you

[@chatnoir4604]

As all time, an excellent job. Thank’s for your sharring ❤

[@markoroolaid]

Thanks

[@johndagg1081]

Beautifully engineered and constructed. Interesting to see new design choices when 3D printing. Well done. Really flew better than I expected!

[@markoroolaid]

@@johndagg1081 Hello, thank you so much

[@nilim9606]

Belle revanche 👍 congratulations

[@markoroolaid]

Merci beaucoup. Un petit intermède, avant le nouveau vol du grand GEE BEE

[@wernerpfeifer]

Grandios 👍👍👍

[@rinku1n1n]

Awesome. And it's so cool that you can enjoy this with a 3S 450mAh battery. Please show us some more fun flights.

[@Cedric.landes]

Another bieutiful job Marko !!!!!!!

[@markoroolaid]

Hi, Thank you so much

[@MicaeleGregoratti]

molto molto bello,ben pensato e ben costruito..io ho sempre giocato con la balsa,mi sto avvicinando al disegno/stampa 3D...ho comprato una bambulab A1 mini..comincerò a progettare qualcosa di più semplice e piccolo..è bello vedere modellisti bravi come te,ancora complimenti!

[@markoroolaid]

Grazie mille

[@FarmerFpv]

Incredible build Marko. Your builds always amaze me. The amount of detail is also amazing. That is how we made hinges with UHU POR 15 years ago on GWS Foam planes. It works really well with Foam Tac or Bob Smith's Foam Cure as well.

[@sennetje]

Wait, is that just the glue on a sharp edge? And the elasticity of the glue creates the hinge without it shearing off?

[@kevinmatney2218]

Great Job love your vids

[@markoroolaid]

Hi. Thank you very much

[@airthom]

Hello Marko! Thank you for the great model and the great video! However, I only have printers from Prusa - sorry! Is there a setup for the filament without Bambu?

[@Aeroworks-hf6kt]

Nice work. You make some really fantastic models, I am looking forward to your next build

[@markoroolaid]

New projects are coming soon

[@TobbeArnesson]

Oh man, I've always loved the R3 retro futuristic look! I almost cried for real when I saw you crashed the large one. Also, I just got an Bambu lab A1 and a roll of PLA Aero. I will definitely try to print and build this! ❤ How much throttle did it "hover" on? How long flight time? Thank you for sharing the files! 👍

[@markoroolaid]

Hello. The wing loading of the aircraft is very low, therefore the aircraft is already flying at 30% power or even less. Flight time 5-6 min

[@Prevettspecialdesign]

Fantastic..!!! What a well thought out design, something very different. I love the idea of a single front tray to mount everything. Really nice design. Love the way you did the hinges, I can't wait to try that for myself, and finally a huge thank you for giving us all the files so we can't pint our own. You are a Legend!!! Thank you.

[@markoroolaid]

thank you

[@dableit3936]

Saludos, desde Mexico

[@markoroolaid]

Vaya, bastante lejos de mi casa. Saludos cordiales desde Estonia y gracias por ver mi video.

[@PlaneFunRC]

Fantastic job my friend. This version looks like it flew a lot better than the original version. Did you add any right thrust to the motor for this version?

[@markoroolaid]

yees, 2 degrees

[@crazyfun4u69sls]

Hello, can you offer any info on the number of wall passes you did for the model on the fuse and alignment rigs?

[@JustGoAndFly]

nice video I like it without the music and just the build sounds

[@markoroolaid]

ok

[@LinchangLu-y1o]

Really nice and amazing work. Thanks for sharing. Some questions about how to set 2 wall loops for fuselage in bambo studio while using spiral vase mode and how to ensure the quality of overhang wall (the outlets of two control rods) in part F5

[@markoroolaid]

if there are 2 wall layers, you cannot use vase mode. I put a separate directory Grabgad, where Bambu's work files

[@LinchangLu-y1o]

@@markoroolaid thank you so much

[@vpsrj]

Not every hero wears a cape! Thank You for doing this awesome job! It's incredible easy build and I just have one question: what glue did you use for ailerons and other movable parts without any hinge?

[@markoroolaid]

Hi, UHU POR

[@kellyklein134]

Hello, I am currently building this awesome model and curious of your flight weight? Thank you for the great design and looking forward to flying this one!

[@markoroolaid]

@@kellyklein134 Hi, takeoff weight 690g

[@kellyklein134]

@@markoroolaid awesome! I have a 850kv motor and setting at 1,077g

[@johanb8113]

Excellent work 👌👌 What are the printing specifications if I don't have bambulab?

[@markoroolaid]

Hello The Bambu printer does not have any special settings. See the recommendations on the LW filament package and you can also print with any other printer

[@johanb8113]

@@markoroolaid I have a question, the value of the flow you used is 60% or 100%, thanks for the answer

[@markoroolaid]

hi, 60%

[@johanb8113]

@@markoroolaid Hi Marko , a question for the MM1 part, what value of Infill and Wall line count do you recommend?

[@tumadsvids]

Geez Mark, doing a test print now scaled to 1200mm. Not sure what this version is though. Many thanks I can get all construction from this video but some included files are a mystery Landing3 -8 etc. was that for the bigger version?

[@ANDY-mo1rb]

Excellent video and fantastic job!Can you tell where is CG on model?

[@ANDY-mo1rb]

Oh yeah,found 50mm.

[@markoroolaid]

ok

[@ANDY-mo1rb]

Building my model.Is any chance to share more detailed printer settings please?What fuselage thickness are?Thank you

[@fierceflyer5]

Marko that was fantastically successful. Now it’s time to revisit the large one again. What a beautiful plane as always

[@silviosalvini1034]

Hello Marko. Beautiful Gee bee R 3. please it is possible to buy the printing profiles for bambu lab X1?

[@markoroolaid]

Hello Check out Grabcad I just updated- Bambu Lab X1 catalog. I really hope this helps

[@ESPS_90]

Excellent video Marko, are you planning any large-scale projects?

[@markoroolaid]

When the weather gets cold, large scale projects will come. A bit of a wait

[@ESPS_90]

@@markoroolaid I hope so... Are you planning to expand your workshop?

[@superskullmaster]

What’s making the hinge joints?

[@MoritzWeller]

Nice work! Was that 700g AUW on the scale? What is the wingspan?

[@markoroolaid]

Hi, 700g takeoff weight and wingspan 1120mm

[@MoritzWeller]

@@markoroolaidthank you for responding! Of course I meant to type 700g 😄👌 Your builds are always inspiring!

[@danielyoutube8960]

Nice Video Which glue do you use?

[@markoroolaid]

Hi, link here www.rotorama.com/product/power-fix-ca-pack-vterinove-lepidlo-r-s-h-20g-aktivator

[@Flyit37075]

Nice finish, no printer lines at all... 3D printing has cm a long way

[@markoroolaid]

Hello I think the Aero filament is also the reason for the good surface. Filaments of this type leave a very good surface quality

[@jonny9842]

Which Electric Screwdriver did you use in this video? A ES15S intelligent Motion Control Electric Screwdriver? How is the quality of the screwdriver? Are you satisfied with it? I've been following you on KZbin for some time now. I am enthusiastic about your work. Keep up the good work.

[@markoroolaid]

Hello. This is a Miniware screwdriver. I have had it for several years and can highly recommend this product. Metal gearbox, proportional control, usb charging and many other functions. Super good product. In fact, all Miniware products are good

[@markoroolaid]

Link too www.amazon.com/MINIWARE-Screwdriver-Precision-Rechargeable-Electronics/dp/B09MVM9PTW

[@jonny9842]

@@markoroolaid Thank you for this informations. I think I will buy one.

[@tvideo1189]

Are the stl files available for sale?

[@markoroolaid]

@@tvideo1189 hi, look here, everything is free grabcad.com/marko.roolaid-1/models

[@tvideo1189]

@@markoroolaid Thank you!

[@apenasumfpv]

This can be printed on bambu lab a1 mini?

[@markoroolaid]

@@apenasumfpv I see no direct reason why not

[@pokiou]

are the hinges just UHU Por ?

[@markoroolaid]

Hi, yees, only UHU Por

[@lowtus7]

Those hinges are crazy, wouldn't have expected that to work. Great plane as usual.

[@markoroolaid]

They work very well. I've done them before

[@ripmax333]

How the F$#@k did you came up with the idea of using UHU POR for the hinges😮, your a Genius! So you just apply it on both sides, let it set for a few sec and then attach the parts together? And the Bambu pla Aero is kinda the same as LW-PLA From color fabb?

[@FarmerFpv]

That's how we made hinges on GWS planes 15 years ago. You can also use Foam Tac or Bob Smith's Foam Cure as well.

[@ripmax333]

@@FarmerFpv No Wonder I adore the RC Hobby, You always learn something New.

[@markoroolaid]

ok, thanks

[@markoroolaid]

Hello Hinges -exactly as you described. I have no information about Color Fab filament, I have never used it

[@ripmax333]

@@markoroolaid, maybe you are familiar with ESUN LW-PLA, the filament that expands with heat? is this Bamboo filament the same?

[@AntiVaganza]

great content as ever, but can you do us a favor and check your audio levels next time you export a video. I think "you" are pretty loud.

[@markoroolaid]

Ok, the sound is always a bit messed up, youtube adjusts after uploading

[@oldman1944]

Try the "Stable Volume" option in the video settings 🙂

[@AntiVaganza]

Ah, I didn't know that. The few uploads I have done was a long time ago but also my audio was "normalized" already in post so perhaps YT didn't try to correct anything or it just wasn't an option back then.

[@oldman1944]

@@AntiVaganza This is a new feature I believe. It's great on things like this, but not good for old films with background noise.

[@wessievanderwesthuizen1807]

There is a thing on your remote to control the volume. It is normaly called "Volume". The + makes it go louder and the - softer. Try using it. Works for me.

[@GigiolaCinquetty]

Is foam printable ???