BUILDING The Perfect PS5 Controller!!!

Hello everybody! Today, we modify a PS5 controller!
FOLLOW ME ON SOCIAL MEDIA!!
/ shorttkamanda
AFFILIATE LINKS:
Rise Remap Kit: amzn.to/2Y7Gl9a
Clicky Hair Trigger Kit: amzn.to/3gGXDAg
Analog Sticks: amzn.to/3mGhHXn
Face Clicky Kit: amzn.to/2WuN1gH
Buttons: www.amazon.com/eXtremeRate-Re...
Faceplate: www.amazon.com/eXtremeRate-Co...
Screwdriver Kit: www.amazon.com/STREBITO-Preci...

[@CmdrValiant]

Great video, but better remove that ribbon cable from the touchpad before using the heat gun, you could damage the ribbon cable if you did not. Also, a hairdryer will work too.

[@mikep9862]

Amazing video. Thank you for putting this together. I plan on doing the same mods

[@nelsonbras9233]

I must say you explained and showed everything in detail. Well step by step

[@TRIBAL-mb4tq]

Sick setup thinking of a grey setup myself. Thanks for the inspirations

[@RNG_Anarchist]

This is the best video I have seen on this issue by fair

[@scottChapman25]

Awesome! 😊

[@riceshaddow]

awesome video! im gonna do this to my white controller

[@whatsmine7848]

Thanks for this video, I doing the same with one of my controllers it’s a lot cheaper than getting a scuf

[@ClutchBeatz]

Nice video , I’m doing mine soon !

[@camerongodsey9847]

This is pretty handy information. The controller is nice as is, but being able to re-map controls, as well as add paddles, is a nice bonus. Thanks for sharing!

[@chuckrichardson83]

I just wish that there was a way that you could adjust the triggers accordingly so that when you didn't want to play FPS games you could revert them back to normal similar to what you can do with the edge because then I really wouldn't need my Edge anymore

[@GreenLantern1971.]

What controller would you recommend for warzone if a person can’t perform these actions to create such a controller that your hand hold ?

[@dannyyang9267]

Awesome ps 5 controller

[@nngene139]

I have a question what di i do if the hair klicky kit for r2 is not klicky

[@knightmareKnight1]

Was this install on the bdm-10 or bdm-20?

[@Jayballinallday]

My ps5 controller don't have that white bar going across it in at 4:48

[@Traecaddy-wk2dz]

i bought everything but the back paddle kit says it wont work with bdm -030 and the clicky face clicky kit says it wont work with bdm-30 so i am not sure what to do my buttons and my face plate work with all just not the face plate clicky kit and the back paddle kit can someone help

[@ChrisCashon]

“Just give that little white thing a wiggle. Teehee” - Amanda, 2021

[@gamersparadise.]

Nice

[@HeyItsAsmus]

I keep debating on doing the triggers, I just want to know if I play GTA V will I still be able to drive normal. Or will it only let me drive slowly because the full throttle response would essentially be gone?

[@LloydsSky9]

You probably already settled on an option, my suggestion would be to dedicate one controller to FPS games and another to everything else.

[@420-Mafia]

You will not be able to drive slow it’s either full throttle or nothing

[@GreenLantern1971.]

@@420-Mafia 😂😂😂😂

[@josephchevarria1644]

So I did my led lights first They work great then a few days later I tried adding the back buttons it turns on and everything clicks but the buttons are not mapping is There a solution for this

[@VR_Check]

Does the light work when switching on and off? When attempting to map?

[@bigdaddy-fu1zt]

I need some help! The face button is not blue on my controller it is black and has the r1,r2,l1,l2 Attached to the face button . The thing you’re removing at 9:44 on the video. (Model CFI-ZCT1W) with a little A, ID:AK8CFIZCT1A. Plus on the face plate you see those 2 screws on the left and right side my controller doesn’t have them. I’m so confused I got parts for BDM-20 from extreme rate. I just saw BDM-30 on motherboard I’m so confused please help

[@GuruJSGamingIsFun]

Hi you have the newest revisio n of the controller. It is indeed quite different inside. You need a specific BDM 030 kit for it. The kit for the BDM 010 / 020 will not work.

[@TheSilverFX]

I think it's best to do it in one stint. Just reduces the chances of breaking any ribbon cables if you wander too often into disassembling the controller over and over.

[@Willl_b_]

yes this is true. i ended up breaking one of the small contacts for the ribbon wires on mine. be careful

[@billlockhart2272]

well I would try something like this. IF I COULD EVER GET A PS5! P.S. nice video

[@jairogarcia5611]

Bruh I did this and my controller won’t charge anymore or turn on 😩

[@sophomaniacal6386]

thier aluminum sticks dont fit

[@Gamer_Robot5]

Can you make ps5 console plss

[@tiedye1631]

She sounds Jennette mccurdy

[@jma5307]

13:54

[@outdoorforlife7018]

How much did all this stuff cost

[@Virt7_]

Like 60 bucks for all

[@FrostThorn]

All that for a control that will drift a week later

[@zombiemachinery4868]

There is a chip for that, that you can add while doing all this stuff.

[@FrostThorn]

@@zombiemachinery4868 a chip won't do anything its the module used in the controller that has a graphite ring inside it which over time wears down, dust, hair also does it.

[@Raven.Bloodrot]

​@@FrostThorn there's a chip that lets you reconfigure the module so it no longer drifts, yes it's an actual thing Vcuda reviewed them. They do require soldering though.

[@FrostThorn]

@@Raven.Bloodrot that only lasts so long and then you just end up with a very wobbly stick with a lot of dead zones, the only way to stop drift is to replace the rings in the analog, or just get the edge which is so much better than anything you can build

[@supernice_auto]

a) won't drift in a week b) easy to replace/fix yourself

[@Kyrious]

Definitely not perfect. You didn't install an independent button d-pad mod

[@MrA-wd7gm]

What are the benefits? I’ve never had a issue with the stock dpad.

[@malcolmjelani3588]

Your husband allows you to spend money on all this? Amazing 🤦

[@GreenLantern1971.]

People like you are weird and always go left with simplicity