Building the second gen. steel tongue drum with Ikea parts

[@MaytrixBrake]

impressive! i was thinking of attempting something like this as a winter project

[@1mdlmusic]

Great job! Glad to see one made without welding. It looks and sounds excellent. I’m going to make one for myself.

[@Randy-nb6fw]

i think if you messed around with the size of the hole in the bottom you could change the tone and potentially make it a little deeper / bassy sounding

[@xezerik62]

really cool, if i had all the tools needed i would be doing this myself

[@arjunahandpans237]

Cooles Projekt! Noch ein Trick für mehr Sustain: Das Material richtig heiß machen mit zb. einem Gasbrenner. Danach die Zungen ein paar mal leicht hoch und runter biegen oder hämmern. Dann erst feinstimmen. Somit können sie freier schwingen und haben erst dann einen richtigen Nachklang. Viele Grüße

[@hendrikruegen1279]

Vielen Dank für den Tipp :)

[@bryanmunroe4593]

Good vibes.

[@101boertjie]

The idea and execution is super. I am just wondering why, with all the space available on the "bowl" did you not make more tongues and resulting from that a wider range of music notes on the bowl. Ok, I am guessing here, but it does seem possible that you could fit in a few smaller tongues by placing these ones a bit closer together. The reason I am asking is that I saw some 12 inch drums with 15 notes on them, and this thing is larger than 12 inch diameter. Just asking, because it appears to be possible.

[@sorayanwolf]

beautiful tutorial! I found the same dishes and I'd like to try to replicate the experiment..I wanted to know where you found the models for the tongues? I'd like to try to create a D Minor Celtic D scale tank drum, are there models to print? thanks a lot!!!

[@hendrikruegen1279]

You can check this page for orientation: paniverse.org/handpan-scales-list/

[@sorayanwolf]

@@hendrikruegen1279 thanks!!

[@hendrikruegen1279]

@@sorayanwolf you're welcome. if you want please share your pan with me when it is finished :)

[@sorayanwolf]

@@hendrikruegen1279 yep, unfortunately After quarantine

[@meetidnani]

I would sueely want to try this soon.. The link below for the scales list does not work.. Would u know any other site from where I could get a printable version of the tongue sizes?

[@narayanansubramaniam9970]

I have ordered a steel hand drum from China!

[@hendrikruegen1279]

Can be a good and affordable option if you don't wanna do it yourself :)

[@antonioexposito1418]

Dónde compraste la estructura metálica??

[@hendrikruegen1279]

Antonio, could you ask again in english?

[@danivc9878]

@@hendrikruegen1279 where did you buy the metalic structure? that is antonio its question

[@hendrikruegen1279]

Ah OK, thank you for the translation. I bought it at Ikea but it is not available there anymore. But you just have to look for decoration bowl, there is a huge selection :)

[@danivc9878]

@@hendrikruegen1279 what's it brass?

[@hendrikruegen1279]

@@danivc9878 the sort of metal the bowl is made of.

[@AlchemistTongueDrums]

What gauge is the metal?

[@lukejxson]

Hello mate. Brilliant tutorial. Thinking of trying this myself, but I can't find this exact bowl. Could you provide a link?

[@hendrikruegen1279]

Thank you :) Sadly the bowl is out of stock @ Ikea. You can try similar locking bowls, they are often offered as decoration bowls but the material shouldn't be too thin!

[@lukejxson]

@@hendrikruegen1279 Thanks for the advice mate!

[@davelester1985]

How much did the bowls cost? What kind of glue was that? Why those keys, D# minor?

[@hendrikruegen1279]

Each bowl was 12,99€, the glue is shown in the video, its UHU Epoxy with/for metal.

[@AlexStepanovHE]

cool idea! Unfortunately I cant find such big diameter in Ikea in Russia. You should try making less ammount of notes, for example 10 without centre note, or 11 with. You made to many notes and they conflict with each other. Also try to burn the tongues after you cut the tongues, but dont forget to leave some space to fine tune them after burning. I'm sure this might help

[@mavdoc6668]

Schöne arbeit ;)

[@davidsabine6942]

I do believe I would have soldered the pans together instead of glueing them.

[@hendrikruegen1279]

I am not able to but hopefully I will learn it this summer.

[@grumblknurr]

How long did it take?

[@hendrikruegen1279]

About 2 working days. Plus the waiting time for the glue ... it needs 10 hours to dry.

[@flino3117]

Das kann auch nicht funktionieren, da diese kleinen Dellen im Material, die Schwingungen absorbieren. Somit schafft der Körper keine Resonanz aufzubauen. Deswegen klingt die auch nicht nach. Zudem scheint das Material für die kleine Größer einfach zu dick zu sein. 0,7 bis 1,0 mm ist sehr fein, schillernd, lange nachhallend. 1,2 bis 1,3mm brau hat es mehr Kraft, ist deutlich lauter, aber kein langanhaltenden bzw. Nachklingenden Ton.

[@hendrikruegen1279]

Guter Input, vielen Dank ☺️

[@davelester1985]

mask needed

[@tangokaleidos1926]

no way