Building The Worlds Craziest Overlanding Camper Truck - Tail Gate and Bumper

[@BisforBuild]

Thanks to MANSCAPED for sponsoring today’s video! Get 20% OFF + Free Shipping on your order with promo code “BUILD” at manscaped.com/bisforbuild

[@Vinegar_Stroke]

Would it have been a lot simpler to have your tailgate on gas struts also swinging upwards? Gets it out of the way for loading/unloading the boot. Either way you're killing it, good stuff 🤙

[@scottibass]

@@Vinegar_Stroke then you can't sit on the tailgate for tailgating. I'm thinking you are not in the US?

[@johnmejia3195]

Hey Chris what CAD/CAM software do u use

[@linksword1514]

just in case you forgot, you didnt put a link to carparts in this vid

[@ryanjohnson1641]

With everything you have been through personally and with your friends and builds and new shops and all the other chaos of life, I find it very inspiring how positive you guys seem to be in every single video. This is hands down my favorite group to watch on KZbin and thank you guys for creating and sharing this content so consistently!!!

[@Markisamiller]

A thousand percent this ☝️

[@gravity00x]

Oscar is such a frickin good metal worker. Insane. Could watch this guy build stuff for hours!

[@1986krazy]

The swing arm idea turned out pretty cool. If I could make a suggestion, add some grease nipples to the sleeves that will act as your hinges. I work in a shop that does a lot of work on trailers, and being able to grease the hinges will help with rust prevention/ceasing, and also excessive wear from the friction of opening and closing. The build is coming really cool. Can't wait to see the finished camper truck 👍

[@coltonmcrae5873]

I came here to say this! Some simple grease fittings will see that design live long, happy service life

[@HausBauConstruction]

I was thinking the same, the hinges need lube, else rust will seize them etc

[@SillySalmon94]

Same thoughts!

[@platinumchopper]

THIS!!!!

[@toddabbott781]

I would have had the back door split and swing open to the sides. With that tailgate being so deep it will be hard to reach in to grab tools and such. Then you could have used the step in the back bumper too... and the overhead window could open and protect you from the rain if you still had enough room in back to sit. You could then do a swing down grill on the inside of the door and sit back there and cook. Then you could have mounted the swing arms to the door and left them.

[@guitarsguitarsguitars6498]

He mentioned he will have generators and welders and such in there not tools. So he should be good to go. But that's definitely a good point just in case.

[@Enter-a-name55]

I was just thinking the same. With the door opening down like that it will be extremely awkward to get anything in or out. Barn door style doors would be the smartest choice. At least then that rear compartment would be usable. Let's face it, if it is super awkward to put anything in there, like a cooler, it will get tossed in the living quarters with everything else. That's just a really bad design all around.

[@guitarsguitarsguitars6498]

@@Enter-a-name55 did you watch the video? It's for a purpose. They want to use the long tailgate as a temporary work platform when needed.

[@dcskater180]

You could make it have a chain the that holds it flat so you could un-hook it to load with it 180* down or 90* when you want the tailgate. But that top window may be really hard to close its going to be really high especially if you stand a few feet back.

[@keithgarnett2568]

That gap between the bumper and the tailgate is screaming out for a cyber truck style light bar with all the brake/tail/signals/reverse. It would look super clean!

[@Onelando]

I’m convinced Chris isn’t happy till he can get Oscar to cut something in half and weld it together bigger than before 😂😂😂 good job guys!!

[@douglasverkaik4662]

You are missing a great opportunity for some really cool taillights in that narrow horizontal panel.

[@fredmortensen5107]

I second this motion like a dual pass LED strip and staggered turn signal lights like a Mustang.

[@Enter-a-name55]

I thought the same. Perfect spot for taillights and camera

[@tootone]

thought the same thing!

[@jonguthrie471]

This has got to be the heaviest camper ever made

[@djsonicc]

gonna be heavy like a tank

[@brianb-p6586]

No, but it's not going to be light.

[@bradgee5706]

For the rear electrical box you should put it on slides to be able to maintain all of the equipment inside.

[@yessiryousir]

I love this build and I know Chris assured us that all the weight of this steel won't won't affect anything but the more steel I see added the more I don't believe him hahaha

[@TheBobruub1]

He is going to need to invade a foreign country to get enough petrol for it.

[@dakotajohnson5009]

I have no doubt the truck can handle the weight but as soon as they try to overland with it, it's going to struggle hard

[@Enter-a-name55]

Pretty sure that's the reason every Camper out there is made from lightweight materials. Aluminum, plastic, etc. Sure, Aluminum may be more expensive but at least the vehicle will be usable

[@NaughtyGodz]

You should add a hinging ladder to the tailgate that makes a step to get in and out from the back bed area. Would be dope :)

[@ReignDropsCoffee]

Agreed

[@SkyBlaZer168]

@@ReignDropsCoffee i was going to say the same thing.

[@dolph]

I think the bed area is only accessible on the interior and behind the tailgate is closed off from the inside. Basically behind the tailgate is only storage you get to from the outside.

[@mattandcandle]

@@dolph I think they are just suggesting a ladder on the back so that you could climb down from the window.

[@dolph]

@@mattandcandle In retrospect, that makes more sense. Thank you. :)

[@561ENTERPRISE]

I know this is your channel and everything, but I want to give you mad props to your fabricator welder. The guy's done some amazing work and he definitely needs some recognition from a guy who welds. Really enjoying the build you all.

[@philryley7521]

Is the roof strong enough to stand on, and use as a viewing/party platform? Just a thought if you are at a race or need a good viewing platform now is the time to put the infrastructure in there. You’ve probably already thought of this but I thought I’d mention it. Looks great.😅

[@BisforBuild]

We thought about that, but its kinda dangerous being up so high without a railing. So we decided against allowing anyone on the roof.

[@One_Bar]

@@BisforBuild I mean you could have made some drop in rails that stowed on the sides when not in use. That would have been neat.

[@dbk81]

You should 100% be putting solar panels on the roof.

[@One_Bar]

@@dbk81 combine this with the railing. Make the rails hinged so that they stow flat on the roof with the panels on the outside so they can charge. 2 birds, 1 stone.

[@neilfairless4589]

Chris, that panel in the rear that doesn't move, 2 small winches attached to it with cables, will have that rear door opening and closing under power and the cables will hold the weight of people as well. With a lip on the tail gate, you will be able to hide the fixings and through holes.

[@sk8klown88]

As someone who lived full time in a big camper conversion, I highly recommend having the backup camera always on, I had a separate screen that showed my backup cam basically like a rear view mirror. I’d also highly rd ya couple of Maxxair ceiling fans/vents

[@chrishenry571]

Put a little unfolding kitchen in the back storage area. With the window hatch that opens, it will provide a little shade or rain protection while you cook! (All cooking smells and smoke WILL go inside if the hatch is open though, keep it closed for catch-and-cook days!)

[@robertstortz5182]

You can also have a 2 inch receiver front and rear, then a removable winch. Less weight, one winch.

[@abokhalag]

add more tile light in the gap between the door and the window

[@Darkside_C7]

This series has gone from something I didn't think I'd be interested in watching to one of my favorite builds.

[@M-R-travel]

For a clean look put an L shaped rod on the inside corners of the tailgate and just a hole in the rack to hold the Tailgate flat. You could even use that same rod and latches mounted to the bed support to hold the tailgate closed

[@laynepalmer8690]

Lovin the build, and also loved how because the back basically works like a giant truck and canopy, the shots of it being built looked like little people working on a normal truck canopy 😂

[@muzaffarshamim447]

Oscar is a hell of metal fabricator. Hats off to him. 👍👌👏. And good luck to the Team for the completion of this built

[@ryanmcintyre4263]

I love watching your content! I have one visible issue with the last few camper episodes wish you had covers on the cars behind. I have been cringing at how much grinding and welding you guys are doing right next to them they must be covered in metal dust by now eating into the paint!

[@erichage8881]

You should install a maxxair roof vent fan. Works great to draw a breeze into your camper.

[@davidcatlette9697]

When I see the boat build come back I will start watching again !

[@Sam-dm4kz]

2 inch foam comes in 4X8 sheets can insulate and soundproof this camper nice, it’s also fire proof. HomeDepot baby.

[@rickway2039]

I'm so excited for a future cross over event where you get this thing stuck and Matt's Off-road Recovery has to get you out! :D

[@garypease7414]

Love the single tire rack. But as an "overlander," you will get more than one flat tire on occasion. You might want to consider using the stock, under truck tire stowage, for a second spare. Just a thought. Absolutely love this build so far! On the swing outs, take a football, fill it with foam, cut it in half, and form each half over the sticky outy parts. Make a piece of wood that fits between them for storage. Just an idea again.

[@meadowsm100]

This thing is gonna crumble if it ever gets taken off-road, flat tires will be the least of their worry.

[@schalkspies8189]

I discovered this by chance and binged it.....😄 The birth of a metal monster....wow. Wow till now and.... Can't wait to see the final product.. 👍👌

[@vanillagarilla965]

Super talented group of people , I’m in awe of what came of this project. Great friggen job you guys !!!! I really am looking forward the finished product. The rendering is nothing compared to the actual image. 👍🏻👍🏻

[@anup8811]

It is great satisfaction for an engineer to see his ideas come to life. Really great job

[@ou7shined972]

Fascinating build. Found your channel by chance and binged the whole process thus far. Digging the presentation style - you say what's going to happen, then boom it happens, lol. You've got a great team there. Looking forward to seeing the rest of the build through to completion.

[@TheBlaqDeval]

Love this build and amount of fab work you put into it like you are whole RV factory to your own specs! Can't wait to see it complete and on road, bro! 👏

[@silverbulletS197]

Im glad to see Chris back and at the game lookin 1,000,000%!!!

[@scottgray4622]

I wonder if the stock "power wagon" emblem would fit on your filler panel, the one between the window and the tailgate???? Also the big ram emblem between the 2 swing arms would be sick.

[@chriserickson1972]

If you make the rear bumper slide out, that will give you a support structure for the hinged door when open.

[@aychdee981]

You should add zerk fittings to the swing out pivots for longevity and maintenance ease…lovin it so far

[@twodogsyyc6729]

Incredible build. For 12v system I've found Australia has next level setups to get ideas. Next level stuff it would fit right into this next level build!!

[@1BadRAMLimited]

Oscar is a bad ass! Keep making us chicanos proud brotha!!!!

[@DachsAutos]

This thing is looking pretty sweet! Getting to look more like a rugged shell vs. some other well known shiny, multi-angled truck!

[@cuervo855]

In my opinion, the bar dividing the back of the camper will limit your ability to load things. Maybe you can retihink a solution that doesn't involve that bar. Something such as the rear gate of the bmw x5. Love the build so far 🤙

[@sandsxgg]

Have y'all considered welding zerk fittings into the hinges so you can keep them lubricated and rust free?

[@jessecarst2093]

You might want to consider hinging that lower panel from the top. It makes it more convenient to get into and it creates a shelter from the rain.

[@MattBrownbill]

Welding burns on the forehead look scary! 😮 Great work on the swing away storage.

[@proudfather83973]

You should have put a third brake light and light bar in that rear filler panel area

[@Uotilagarage]

This channel is the best. Man with a vision and perfect team with master fabricators to bring that vision to life. My hat off to you all! I'm just wondering does Oscar or anybody else ever say your vision is impossible to bring in real life, or do they just trust you enough that they just do it no question asked?

[@RantzCore]

So, rearview camera and running/brake and reverse lights for the back in the bumper. Lighting LED strips for storage/tailgate area? See if someone wants to use their artistic mural skills to beautify the exterior flat pieces for the OverlandhaulRV? The build is looking terrific and looking forward to seeing the progression continue. 😎👍

[@genesmith4642]

How can anyone not like this build. And there could be another build to make it off grid which would attract those subscribers.

[@garyw4596]

A lot of fore thought and a pinch of after thought makes for an adaptive design. Bravo.

[@jasonharris3873]

You need a backup camera in that beast. Nice progress. Time for some camping and boat rebuilding.

[@MrMorepower71]

Idea for you. Drill and tap a hole in the rack collars and put in a grease fitting to throw a little grease in ocassionally.

[@v745ti]

If you upsize your wheels & tires make sure there are provisions in your swing out to accommodate it. Also, echoing the other commenters, zerk fittings and dust boots around the hinge collars will help immensely with service life.

[@victorpurilla5894]

Live the way you have so many different projects for every situation... ✌️😎

[@David-zo9oi]

Man, all these automative KZbinrs use to work on their own projects which is why I started watching, and now no one, that I watch, actually does any of the work anymore. Always got their friends doing everything now

[@SkyBlaZer168]

if you are planning on taking this offroad make sure you get some jerry cans to go on the swing arms.

[@jameskendrick573]

Hey brother suggestion you might want to look at trail mater as big as it is you might consider 4 winches one on each side in the middle if you get stuck you'll wish you had them cool build

[@tube8533]

Great! Enjoy watching!

[@dapdavison]

Employee of the month goes to Oscar. The dude deserves his roses.

[@brandonmann1736]

Should do a hidden winch behind the liscence plate with a plate holder from an old muscle car I think that would be cool

[@eaglebrink]

For securing the backdoor in the down position, you could fabricate a boltstyle lock like that of of a gate on the backside of the rack.... you could make it long enough and let it slide into a hole on the top of the door.... If you do that on both sides the tailgate would be pretty secure i think plus you would not interfear with the tire when it's on the rack...

[@HemiEhBody]

The build is looking great. However it's concerning the amount of weight you plan on having past the axle with the battery, generator and possible water and waste storage. I suggest maybe looking into moving some of the weight between the axles. That way you'll have more usable tongue weight and towing capacity.

[@juanarappagis4192]

Coming from a fabricator this build is going to be so useful and awesome for so much content in the future!! B is for build is the best 🤘👨‍🏭🤘

[@BroughBuilt]

I'm loving this build! May I suggest you make the rear lid hinge upwards. This will help with better access inside the box. Also the door won't get in the way of something like a trailer and it would serve as a awning when you are tailgating 😂

[@SimpsonsClassics]

This thing is epic! Its really coming together now.

[@chuckjohnson1331]

my opinion is that back bumper needs to be wider. I looks to narrow but really good job so far guys, love the channel

[@bigfootz8090]

You should put some really cool lights on the filler piece ...like a light bar for tailgating

[@22MrBigdog]

I just got a 6x10 enclosed trailer and finished trashing all the junk inside. I'm converting it to a mobile grooming trailer and you have great ideas that I'm going to be using

[@puresklznyc6074]

Loving the work. Don’t forget the mesh for the back window (some Velcro option maybe so nothing hard mounted where you can’t pass drinks lol)

[@SeanTheVlog]

Please one build at a time

[@KM-uw4ez]

Spare tire should go underneath the truck (it’s unused space anyway) then you could put another storage box in its place. It does look cool there though.

[@vcdrny]

An idea for the tire mount. On the center make something to hold the tire/wheel in place. A center piece or like the old school, 3 studs with big wing nuts to hold it in place. That bar in the middle can be made stronger to hold it. On another note the hinges look like they will fail overtime. Weather dirt on a metal to metal surface is not good. I would find the way to put some type of rubber seals tip and bottom. Then ass s grease fitting. So you guys can inject grease. It will stop contaminants from getting in and help slow down the metal to metal wear and tear.

[@stevemustaikis6602]

Just a thought, I would have mounted the tire/wheel on the other side. If by chance you have a flat on the highway, I don't think you would want that swing arm possibly going out into the traffic lane.

[@thegmanfromsf]

That's a cool looking gate. I'd just build it with bearings. Thinking that over time rust can build under the tubing sleeves and weight on the swing outs might make the sleeves bind and the gate difficult to open. A cheap set of trailer axle spindle can be modified for that.

[@kodde0304]

You should put a grease fitting in that slip fit hatch swing thing. It will sieze itself if not lubricated.

[@robinthepresent2952]

Oscar is worth more money, such fantastic fabrication skills

[@trippkelly5856]

How can you say he’s worth more without knowing what Chris pays him?

[@GabenHood]

My 2c, with dualies you might want two spares as rocks in between tend to try to take out both. Not sure about camping personally, seems like it would be better suited as a support truck full of tools and spares for track days, boat trips or road trips looking for barnfinds.

[@raymonda.pruittii2899]

The door to the mechanical space should hinge from the top and the lights needing to be mounted in a non moving piece of the vehicle should go in that middle beam section or everything’s in the bumper LEGALLY I think that’s right.

[@markayers6245]

you should mount table legs that pivot on that upper edge near the center of that drop down ramp. They can even have an adjustable length (like those convertible(non-powered) standing desks. this will allow some additional structure support for the the ramp if its in the Table position.

[@johneverson2433]

All that cutting, welding and grinding going on and I can see the Lamborghini in the background

[@CihaPet]

This thing is a MONSTER! Whoa!

[@moetarded7757]

My mom’s bronco had the swing out arm for the spare. I remember dangling from it a it as a kid! Lol!

[@alimvinca2998]

Not sure if anyone else has commented this already but you should add toolboxes underneath the habitat like a flatbed truck has.

[@ghomerhust]

more and more this reminds me of the big ass overland RVs in the second Jurassic Park movie

[@qLeoYT]

You are welding like a god…

[@ShotgunAU]

The top hinges on the rear tailgate swing arms may need collared bases to ride on like the bottom hinges to distribute the load equally between top and bottom hinge thus preventing sag when open and less maintenance in the future. Just my two cents tho, stay rad.

[@tebogoketshabile2189]

You need tail lights on the body.......and you guys are doing some amazing work

[@samwolfe9774]

Grease fittings for the hinges of the tire and box mount would be a good idea, just a thought.

[@Makka668]

Better get Oscar to check the welds on the box! Haha, the gaming/camping/tow vehicle is starting to take shape.

[@ryan708_vids]

If you’re not planning on it you should add some grease fittings to those tube hinges.

[@largemarge1603]

Barn-doors on the 'garage' wall? Side-doors accessing the 'garage'? Lift-out panel(s) hooking into the edge for a work-bench or outside kitchen?

[@-DUTCHY-]

You guys should do a competition. Guess the final weight of the camper. 😊

[@dejweedz]

Good luck on this awesome build! Good you have the new shop, looking forward to videos of the new shop transformation to a perfect dream bifb garage

[@TheMcooper17]

little tip for welders. put a vice grip to the piece, and clamp your grounsd to the that

[@bennydub7596]

Grinding next to a Lambo 😱 I love it. This is a hefty boy it's gonna be sick 💯

[@ridhadababi5858]

I follow you from the first video, you are doing a good job. Thanks for sharing.

[@bobbyrosa4652]

just a thought, to metal box on the outside needs to seal against the back of the RV or have its' own door as the weather, dust, dirt and crap will inevitably makes its way into the tool set!

[@BCALLEN1]

I'm not going to lie to you Ive kinda been itching to see how that frontend conversion is going to look!!!

[@gettingwrekt]

I feel like the whell storage should be moved to under the bottom where it normally is, and a rack for mounting a dirt bike should be put on the back. Then, complete the overlander setup by truly being able to go anywhere with a couple of kayaks on top, or on the sides. Also, I hope you get some really good rubber isolating mounts on the generator, as well as some good noise deadening material on the inside of that box.

[@tomjohns8498]

Us mortals Bow to your awesome team 😊 cracking building